These are represented as booleans on the kernel-side, but were being exposed
as int. This was causing some funky things to happen when read later with
sysctl(8), e.g. randomly reading super-high when the value was actually
'0'/false.
Reviewed by: manu
We have an obsolete GNU objdump 2.17.50 in the base system, which will
be removed in the future. Suggest readelf(1) for examining ELF files
instead; for most use cases it is the preferred tool anyhow.
PR: 229046
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
original initialization, so we don't miss few registers to
configure.
This fixes vtnet(4) operation with QEMU's virtio-net-device.
Tested in QEMU with FreeBSD/RISC-V.
Reviewed by: bryanv
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D15821
As of r306649 objcopy is always ELF Tool Chain's elfcopy; binutils
objcopy is never used.
PR: 229046
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
objdump is sometimes used in cases where readelf is more appropriate,
but the obsolete GNU objdump we have in the base system will be removed
in the future.
.Xr readelf from elf.5 to improve the odds the more appropriate tool
will be found.
PR: 229046
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
This adds linprocfs support for proc/sys/vm/min_free_kbytes which the
free program requires for correct operation. The approach mirrors the
approach used in illumos.
Reviewed by: imp (mentor), emaste
Approved by: imp (mentor)
Differential Revision: https://reviews.freebsd.org/D15563
Existing linuxulator platforms (i386, amd64) support legacy syscalls,
such as non-*at ones like open, but arm64 and other new platforms do
not.
Wrap these in #ifdef LINUX_LEGACY_SYSCALLS, #defined in the MD linux.h
files. We may need finer grained control in the future but this is
sufficient for now.
Reviewed by: andrew
Sponsored by: Turing Robotic Industries
Differential Revision: https://reviews.freebsd.org/D15237
The Linuxulator provides per-syscall debug control via the
compat.linux.debug sysctl. There's generally a 1:1 mapping between
sysctl setting and syscall, but faccessat was controlled by the access
setting, perhaps due to copy-paste.
Sponsored by: Turing Robotic Industries
This was the wrong solution to the problem; regulator_shutdown invokes
regnode_stop. regulator_stop is not a refcounting method, but it invokes
regnode_enable, which is.
mmel@ has a proposed patch/solution to instead provide regnode_fixed_stop
behavior that properly takes shared GPIO pins into account.
enabled use an updated timestamp instead of reusing the one used in
the initial TCP SYN-ACK segment.
This patch ensures that an updated timestamp is used when sending the
SYN-ACK from the syncache code. It was already done if the
SYN-ACK was retransmitted from the generic code.
This makes the behaviour consistent and also conformant with
the TCP specification.
Reviewed by: jtl@, Jason Eggleston
MFC after: 1 month
Sponsored by: Neflix, Inc.
Differential Revision: https://reviews.freebsd.org/D15634
This command can be used by a sysadmin to disable a malfunctioning pNFS server
mirrored DS. It is safe to use when a mirrored DS has already been disabled
via an I/O or network partitioning error.
Each clock drivers if now fully subclassed, this have the advantage that
we can control the probe order.
Some clocks can have parents from other drivers, for example clocks in the
sun8i_r driver uses clocks from the main clock driver.
This worked before because the sun8i_r node is after the main ccu node in the
dtb and driver are probed in DTB order. This cannot work with the Display
Engine clocks as it is the first node in the DTB.
Tested on: A83T, H5 A64
Tested on: A20 (kevans)
Only the first device will print
coretemp0: <CPU On-Die Thermal Sensors> numa-domain 0 on cpu0
instead of all hyper threads
Submitted by: kbowling
Reviewed by: imp, sbruno
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D15727
- Filter out PRS_NEW procs as rufetch() tries taking the thread lock
which may not yet be initialized.
- Hold PROC_LOCK to ensure stability of iterating the threads.
- p_rux fields are protected by the process statlock as well.
MFC after: 2 weeks
Reviewed by: kib
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D15809
Continuing with a NULL hints variable just triggers a segfault later on.
The other error cases in this function all exit for an error rather than
warning.
Reviewed by: imp
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D15579
The break() system call was renamed (several times) starting in v3
AT&T UNIX when C was invented and break was a language keyword. The
last vestage of a need for it to be called something else (eg obreak)
was removed in r225617 which consistantly prefixed all syscall
implementations.
Reviewed by: emaste, kib (older version)
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D15638
regnode::enable_cnt is generally used to refcount regulator nodes. For
GPIOs, the refcount was done on the gpio_entry since more than one regulator
can share a GPIO.
GPIO regulators were not taking part in the node refcount, since they had
their own mechanism. This caused some fallout after manu started disabling
everybody's unused regulators in r331989.
Refcount it.
Glanced over by: manu
The "-p" option specifies that the nfsd should run a pNFS service instead
of a regular NFS service. The "-m" option is only meaningful when used with
"-p" to specify that mirroring on the DSs should be done and on how many of
them.
This change requires the kernel changes committed as r334930.
The man page update will be committed as a separate commit soon.
If fault started before vmspace_fork() locked the map, and then during
fork, vm_map_copy_entry()->vm_object_split() is executed, it is
possible that the fault instantiate the page into the original object
when the page was already copied into the new object (see
vm_map_split() for the orig/new objects terminology). This can happen
if split found a busy page (e.g. from the fault) and slept dropping
the objects lock, which allows the swap pager to instantiate
read-behind pages for the fault. Then the restart of the scan can see
a page in the scanned range, where it was already copied to the upper
object.
Fix it by instantiating the read-ahead pages before
swap_pager_getpages() method drops the lock to allocate pbuf. The
object scan would see the whole range prefilled with the busy pages
and not proceed the range.
Note that vm_fault rechecks the map generation count after the object
unlock, so that it restarts the handling if raced with split, and
re-lookups the right page from the upper object.
In collaboration with: alc
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
r329104 imported 4.15 DTS which brought CCU to a10/a20. In the process, they
swapped the ordering of 'clocks' for allwinner,sun4i-a10-ahci on both
sun4i-a10 and sun7i-a20 from PLL, Gate to Gate, PLL.
Swap it in the driver.
Note: At this time, this has only been tested on a single board from one of
the supported SoCs. This is enough to boot the board from MMC and have
functional USB- which is still an improvement over where we were at just
before with no functional clocks.
Differential Revision: https://reviews.freebsd.org/D15810
This happens in two cases for a20 clocks:
pll_core for 'n' factor:
factor=0, val=1
factor=n, val=n
ahb divisor:
factor=0,val=/2
factor=n,val=/2^n
Reviewed by: manu
Differential Revision: https://reviews.freebsd.org/D15806
PowerISA 3.0 makes several changes to not only the format of the HPT but
also the behavior surrounding it. For instance, TLBIE no longer requires
serialization. Removing this lock cuts buildworld time in half on a
18-core/72-thread POWER9 system, demonstrating that this lock is highly
contended on such a system.
There was odd behavior observed trying to make this change in a
backwards-compatible manner in moea64_native.c, so the best option was to
fully split it, and largely revert the original changes adding POWER9
support to the original file.
Suggested by: nwhitehorn
