because there was a concensus on current in regards to leaving bss r+w+x
instead of r+w. This is in order to maintain reasonable compatibility
with existing JIT compilers (e.g. kaffe) and possibly other programs.
define. Add a new config flag param (ISP_CFG_NONVRAM) whose intent it is
to cause NVRAM to be ignored. Add ISPASYNC_LOOP_DOWN and ISPASYNC_LOOP_UP
isp_async enums.
Amazingly enough, I did all my scsi_sa work recently without realizing
that I had a broken isp card whose (unchangeable- it's an old old old
isp1020) NVRAM has sync mode enabled, but disconnect/reconnect disabled-
the ISP_CFG_NONVRAM is definitely warranted when you want to bloody well
ignore the NVRAM and set something sensible.
Use fast memory timing NVRAM parameter. Clean up and fix establishment
of default target parameters. Don't use NVRAM if are flagged as not to
do so (I had a busted NVRAM setup which I couldn't edit that enabled SYNC
mode but disabled disconnect/reconnect and wide!!). Fix delays after
resets. BUS resets not done in isp_init anymore- relegated to OS
specific outer layers. Fix a buglet where you can get in a loop for
a NULL xs in the completion list in isp_intr. Add in some defines that
can disable fast posting. Add in code for Loop Up/Loop Down events that
call into the outer layers as to what to do.
no major operational changes were made. The three core object->memq loops
were moved into a single inline procedure and various operational
characteristics of the collapse function were documented.
Do not modify m_len before passing mbuf chains to bpf.
Don't forget to pass packets to bpf when running in Crynwr mode (LINK0).
Partially based on a patch by Bill Fenner <fenner@freebsd.org>.
PR: bin/7241
Improved MSP34xx reset for bt848 Hauppauge boards.
Added detection for Bt848a.
Vsevolod Lobko<seva@sevasoft.alex-ua.com> added more XUSSR channels.
Submitted by: parts from Vsevolod Lobko<seva@sevasoft.alex-ua.com>
Obtained from: parts from OpenBSD
Divert was not feeding clean data to ifa_ifwithaddr() so it was
giving bad results.
Submitted by: kseel <kseel@utcorp.com>, Ruslan Ermilov <ru@ucb.crimea.ua>
PQ_FREE. There is little operational difference other then the kernel
being a few kilobytes smaller and the code being more readable.
* vm_page_select_free() has been *greatly* simplified.
* The PQ_ZERO page queue and supporting structures have been removed
* vm_page_zero_idle() revamped (see below)
PG_ZERO setting and clearing has been migrated from vm_page_alloc()
to vm_page_free[_zero]() and will eventually be guarenteed to remain
tracked throughout a page's life ( if it isn't already ).
When a page is freed, PG_ZERO pages are appended to the appropriate
tailq in the PQ_FREE queue while non-PG_ZERO pages are prepended.
When locating a new free page, PG_ZERO selection operates from within
vm_page_list_find() ( get page from end of queue instead of beginning
of queue ) and then only occurs in the nominal critical path case. If
the nominal case misses, both normal and zero-page allocation devolves
into the same _vm_page_list_find() select code without any specific
zero-page optimizations.
Additionally, vm_page_zero_idle() has been revamped. Hysteresis has been
added and zero-page tracking adjusted to conform with the other changes.
Currently hysteresis is set at 1/3 (lo) and 1/2 (hi) the number of free
pages. We may wish to increase both parameters as time permits. The
hysteresis is designed to avoid silly zeroing in borderline allocation/free
situations.
to an architecture-specific value defined in <machine/elf.h>. This
solves problems on large-memory systems that have a high value for
MAXDSIZ.
The load address is controlled by a new macro ELF_RTLD_ADDR(vmspace).
On the i386 it is hard-wired to 0x08000000, which is the standard
SVR4 location for the dynamic linker.
On the Alpha, the dynamic linker is loaded MAXDSIZ bytes beyond
the start of the program's data segment. This is the same place
a userland mmap(0, ...) call would put it, so it ends up just below
all the shared libraries. The rationale behind the calculation is
that it allows room for the data segment to grow to its maximum
possible size.
These changes have been tested on the i386 for several months
without problems. They have been tested on the Alpha as well,
though not for nearly as long. I would like to merge the changes
into 3.1 within a week if no problems have surfaced as a result of
them.
attempt to optimize forks but were essentially given-up on due to
problems and replaced with an explicit dup of the vm_map_entry structure.
Prior to the removal, they were entirely unused.
(SVR4 does have it so that;s probably the cause of this bug)
2) Add a wrapper function for translation between ibcs2_ipc_perm and
ipc_perm as I think we screwed up when defining the ipc_perm struct and
mixed up 'normal' and creator [ug]id's
3) Fix IBCS2_IPC_STAT semctl. The FreeBSD version needs a union semun
whereas the IBCS2 version gives a struct ibcs2_semid_ds.
Apparently this is all fixed in the SVR4 compatibility code.
PR: 7729
and the variable doesn't even exist (though it is referenced elsewhere).
Just make sure it produces error messages when Mike get back to it.
PR: kern/9934
Submitted by: Adrian Filipi-Martin
alpha to John Polstra yesterday and it was checked in. Then there
was a bunch of CVS activity, and it ended up with the *broken*
prototype being reinserted. All I see in the history is 'style nits'
as a comment, and I certainly agree with the latter of those two words.
with -aout. Added translation back to elf names in asnames.h as
usual. The elf names were inconsistent in the aout case even
internally because a macro adds an underscore to just one of them.
Removed commented out code for a previous life of `svr4_esigcode'.
Didn't add an underscore to `svr4_esigcode' since it is correct for
aout although wrong for elf, like most internal names in assembler
files. These names should be in a different namespace so that gprof
can ignore them.
Fixed some disorder in asnames.h.
to fix the problem w/ NFSV3 whereby a make installworld would get into
high-network-bandwidth situations continuously trying to retry nfs writes
that fail with a 'stale file handle' error.
world breakage (mainly for cross-world cases). The world Makefile
attempts to build tools static so that nonexistent or wrong shared
libraries and interpreters don't get used. This is broken anyway
since the world Makefile doesn't know about svr4_genassym.
Force building svr4_genassym static. This is part of "fixing"
aout-to-elf-build breakage. aout-to-elf-build abuses NOTOOLS to
avoid rebuilding all the aout tools. This saves time and avoids
some complications. However, it breaks all the internal tools --
they get linked to target libraries which might not work. Cases
where the host can run the target's static libraries are "fixed"
by encrufting all Makefiles that build internal tools to build the
tools static.
Don't add .depend to CLEANFILES -- it just breaks the separation of
`make cleandepend' from `make clean'.
Removed some superflous explicit dependencies.
This was missed in the 4.4-Lite2 merge.
Noticed by: Mohan Parthasarathy <Mohan.Parthasarathy@eng.Sun.COM> and
jayanth@loc201.tandem.com (vijayaraghavan_jayanth)
on the tcp-impl mailing list.
the screen width.
- Store the current video mode information in the `video_adapter' struct.
- The size of the `v_offscreensize' field in the VESA mode information
block is u_int16, not u_int8.
