revision 1.101 (which did not introduce the bug but made it harder to fix)
PR: misc/40363
Submitted by: David Dunham <dwdunham@isilon.com>
MFC after: 2 weeks
Peter had repocopied sys/disklabel.h to sys/diskpc98.h and sys/diskmbr.h.
These two new copies are still intact copies of disklabel.h and
therefore protected by #ifndef _SYS_DISKLABEL_H_ so #including them
in programs which already include <sys.disklabel.h> is currently a
no-op.
This commit adds a number of such #includes.
Once I have verified that I have fixed all the places which need fixing,
I will commit the updated versions of the three #include files.
Sponsored by: DARPA & NAI Labs.
it as being in range.
set ifaddr 1.2.3.4/0 5.6.7.8/0
no longer allows 0.0.0.0 as a valid IP.
Reported/tested by: Bohdan Horst <nexus@hoth.amu.edu.pl>
MFC after: 3 days
that already exists for hosts: being able to specify a section that applies
to every program *except* the one in question.
The normal syntax for program specification is still valid. For the new
capability, one uses:
!-program
Since there is no way to specify a program beginning with a dash in the old
syntax, as it would be interpreted as the case above, the following
alternative syntax to the original capability is provided:
!+program
This shouldn't introduce incompatibilities with any syslogd configuration
in production because -stable's syslogd does not support a dash anywhere in
the program specification.
MFC after: 2 weeks
hack, thereby allowing future extensions to the structure (e.g., for extended
attributes) without rebreaking the ABI. FTSENT now contains a pointer to the
parent stream, which fts_compar() can then take advantage of, avoiding the
undefined behavior previously warned about. As a consequence of this change,
the prototype of the comparison function passed to fts_open() has changed
to reflect the required amount of constness for its use. All callers in the
tree are updated to use the correct prototype.
Comparison functions can now make use of the new parent pointer to access
the new stream-specific private data pointer, which is intended to assist
creation of reentrant library routines which use fts(3) internally.
Not objected to in spirit by: -arch
suffix attempts before failing. No need to try again by hand,
particularly when it fills your log with failures because
localhost.example.com..example.com fails to resolve. Also improve the
log message that helped find this error.
There is still (maybe) an uninitialised pointer problem here, but in a
month of testing I haven't triggered it.
minted -v flag.
o Print devices that don't return a name as 'unknown' in -v mode.
# Yea! Now I wont think I have 10 different ISA network adapters in my
# laptop.
synopsis, and the man page description ("selector" vs. "sel" and
"addr" vs. "reg").
Fix the usage message and man page synopsis to show that the "value"
argument is not optional.
under way to move the remnants of the a.out toolchain to ports. As the
comment in src/Makefile said, this stuff is deprecated and one should not
expect this to remain beyond 4.0-REL. It has already lasted WAY beyond
that.
Notable exceptions:
gcc - I have not touched the a.out generation stuff there.
ldd/ldconfig - still have some code to interface with a.out rtld.
old as/ld/etc - I have not removed these yet, pending their move to ports.
some includes - necessary for ldd/ldconfig for now.
Tested on: i386 (extensively), alpha
to control the mapping of things like the ACPI and APM into memory.
The problem is that starting X changes these values, so if something
was using the bits of BIOS mapped into memory (say ACPI or APM),
then next time they access this memory the machine would hang.
This patch refuse to change MTRR values it doesn't understand,
unless a new "force" option is given. This means X doesn't change
them by accident but someone can override that if they really want
to.
PR: 28418
Tested by: Christopher Masto <chris@netmonger.net>,
David Bushong <david@bushong.net>,
Santos <casd@myrealbox.com>
MFC after: 1 week
included into pkg_install according to the content of /var/db/pkg_install.conf
file, which specifies version and alternative location of the tools. Format
of the said file is very simple: one line which specifies revision of the
alternative version of the tools and their location separated by space,
i.e.:
20030102 /usr/local/sbin
This would allow bsd.port.mk to install and use up to date version of tools
on older system from ports.
Also add new `-P' flag to pkg_info, which causes it to report currently
installed version of package tools.
Discussed with: will
ports/INDEX, by allocating eactly amount of memory necessary for storing
each particular entry, insdead of 4K per entry (more than 7000 entries -
go figure). Memory consumption went down to some 500K from some 30M.
files are located at the very beginning of the package, this patch in
conjuction with latest tar(1) --fast-mode fix greatly speeds up pkg_info(1)
operation on package files.
MFC after: 1 week
for it.
While I'm here, add a the ability to say "!level" in a way which
should be compatible with Linux's syslogd.
PR: 28935
No objections: audit
MFC after: 2 weeks
declared - it was bad style and caused a bug. v[46]bind need to be
reset whenever we go to the "more:" label.
Jean-Luc and I came up with this patch independently, so it had
better be right!
PR: 40771
Submitted by: Jean-Luc Richier <Jean-Luc.Richier@imag.fr>
This will replace the existing getextattr(8) and setextattr(8) with
a single binary responding to the names getextattr, setextattr,
rmextattr and lsextattr.
This program is not yet connected to the build.
Sponsored by: DARPA and NAI Labs.
contributor)
- support ipv6cpretry and ipv6cpretries, which are IPv6 versions
of ipcpretry and ipcpretries.
- improve handling of IPv6 link-local addresses
Submitted by: JINMEI Tatuya <jinmei@isl.rdc.toshiba.co.jp>
from the dialler, usually indicating success or failure. Add -v to add
verbose responses in addition to return values indication success or
failure. Update man page.
EHOSTDOWN. These are often transient errors (when the remote host
reboots, temporary network problems, etc.), and we'd rather err on the
side of caution and keep trying send messages that never arrive than
just give up.
Note that this is not an implementation of the "back-off" methods
given in the PR. Those just seem too complicated. Why not just keep
trying each time? Trying and failing doesn't really consume
significantly more resources than if we were successful for each
message.
PR: bin/31029
MFC after: 1 week
called <machine/_types.h>.
o <machine/ansi.h> will continue to live so it can define MD clock
macros, which are only MD because of gratuitous differences between
architectures.
o Change all headers to make use of this. This mainly involves
changing:
#ifdef _BSD_FOO_T_
typedef _BSD_FOO_T_ foo_t;
#undef _BSD_FOO_T_
#endif
to:
#ifndef _FOO_T_DECLARED
typedef __foo_t foo_t;
#define _FOO_T_DECLARED
#endif
Concept by: bde
Reviewed by: jake, obrien
Be (somewhat) prepared for things to change size under us.
Recognize a empty attribute name as magic and print the list of attributes.
Use <err.h> for code clarity.
Deal with zero length returns.
Sponsored by: DARPA & NAI Labs.
vmstat so that they never coalesce. Both iostat and vmstat need larger
fixes to prevent wide fields from unnecessarily messing up the alignment
of all subsequent fields.
PR: 41674
MFC-after: 3 days
by looking at the "type of number" field and providing configurable hooks
to correct the numbers accordingly. See keywords add-prefix, prefix-national
and prefix-international in isdnd.rc(5).
This feature was implemented by Christian Ullrich <chris@chrullrich.de>
(I skipped those in contrib/, gnu/ and crypto/)
While I was at it, fixed a lot more found by ispell that I
could identify with certainty to be errors. All of these
were in comments or text, not in actual code.
Suggested by: bde
MFC after: 3 days
PR40430 by "Peter Haight <peterh@sapros.com>" that has semilar patches
included and which I merged with my own work.
HW sponsored by: FreeBSD Foundation & FreeBSD Mall Inc
Enjoy!
invocations of each service from a single IP address.
Requested by: matusita
Reviewed by: dwmalone
Tested by: matusita on snapshots.jp.FreeBSD.org
MFC after: 2 weeks
some of these need to be enabled for an extra verbose mode or
something):
o Try to print the dBm comms quality. This may or may not be available
for your card in your configuration.
o Print the PRI Id and STA Id. These are in the raw format, so might
be a little hard to read.
o Print CardID so that we can know exactly what kind of card the
user has (this is important if you download firmware to it).
o Regulatory domains are now printed for the card.
o Temp range is printed.
o If you define WI_EXTRA_INFO you get more garbage than is listed
here that you need the manual to decode.
o Channel list is now printed in hex for easier decoding. This has
lead to my discovery that my US symbol card supports channels 12-14
as well as 1-11, which is not allowed in the us/canada.
This ain't pretty, but it isn't horrible either.
