extensions, we can change the .byte directives in sys/dev/random/ivy.c
to plain 'rdrand' mnemonics. This already worked for clang users, but
now it will also work for gcc users.
Approved by: re (kib)
Approved by: so (des)
MFC after: 1 week
they occur.
This prevents repeated notifications of the same event.
Status of these events may be viewed at any time by viewing the
SMART/Health Info Page using nvmecontrol, whether or not asynchronous
events notifications for those events are enabled. This log page can
be viewed using:
nvmecontrol logpage -p 2 <ctrlr id>
Future enhancements may re-enable these notifications on a periodic basis
so that if the notified condition persists, it will continue to be logged.
Sponsored by: Intel
Reviewed by: carl
Approved by: re (hrs)
MFC after: 1 week
when calculating stats in nvmecontrol perftest.
Sponsored by: Intel
Reported by: Joe Golio <joseph.golio@emc.com>
Reviewed by: carl
Approved by: re (hrs)
MFC after: 1 week
handlers rather than in the dtrace device open/close methods. The current
approach can cause a panic if the device is closed which the taskqueue
thread is active, or if a kernel module containing a provider is unloaded
while retained enablings are present and the dtrace device isn't opened.
Submitted by: gibbs (original version)
Reviewed by: gibbs
Approved by: re (glebius)
MFC after: 2 weeks
The AR5212 series of MACs implement the same channel counters as the
later 11n chips - except, of course, the 11n specific counter (extension
channel busy.)
This allows users of these NICs to use 'athsurvey' to see how busy their
current channel is.
Tested:
* AR5212, AR2413 NICs, STA mode
Approved by: re@ (gleb)
field. Perform vcpu enumeration for Xen PV and HVM environments
and convert all Xen drivers to use vcpu_id instead of a hard coded
assumption of the mapping algorithm (acpi or apic ID) in use.
Submitted by: Roger Pau Monné
Sponsored by: Citrix Systems R&D
Reviewed by: gibbs
Approved by: re (blanket Xen)
amd64/include/pcpu.h:
i386/include/pcpu.h:
Add vcpu_id to the amd64 and i386 pcpu structures.
dev/xen/timer/timer.c
x86/xen/xen_intr.c
Use new vcpu_id instead of assuming acpi_id == vcpu_id.
i386/xen/mp_machdep.c:
i386/xen/mptable.c
x86/xen/hvm.c:
Perform Xen HVM and Xen full PV vcpu_id mapping.
x86/xen/hvm.c:
x86/acpica/madt.c
Change SYSINIT ordering of acpi CPU enumeration so that it
is guaranteed to be available at the time of Xen HVM vcpu
id mapping.
Make the amd64/pmap code aware of nested page table mappings used by bhyve
guests. This allows bhyve to associate each guest with its own vmspace and
deal with nested page faults in the context of that vmspace. This also
enables features like accessed/dirty bit tracking, swapping to disk and
transparent superpage promotions of guest memory.
Guest vmspace:
Each bhyve guest has a unique vmspace to represent the physical memory
allocated to the guest. Each memory segment allocated by the guest is
mapped into the guest's address space via the 'vmspace->vm_map' and is
backed by an object of type OBJT_DEFAULT.
pmap types:
The amd64/pmap now understands two types of pmaps: PT_X86 and PT_EPT.
The PT_X86 pmap type is used by the vmspace associated with the host kernel
as well as user processes executing on the host. The PT_EPT pmap is used by
the vmspace associated with a bhyve guest.
Page Table Entries:
The EPT page table entries as mostly similar in functionality to regular
page table entries although there are some differences in terms of what
bits are used to express that functionality. For e.g. the dirty bit is
represented by bit 9 in the nested PTE as opposed to bit 6 in the regular
x86 PTE. Therefore the bitmask representing the dirty bit is now computed
at runtime based on the type of the pmap. Thus PG_M that was previously a
macro now becomes a local variable that is initialized at runtime using
'pmap_modified_bit(pmap)'.
An additional wrinkle associated with EPT mappings is that older Intel
processors don't have hardware support for tracking accessed/dirty bits in
the PTE. This means that the amd64/pmap code needs to emulate these bits to
provide proper accounting to the VM subsystem. This is achieved by using
the following mapping for EPT entries that need emulation of A/D bits:
Bit Position Interpreted By
PG_V 52 software (accessed bit emulation handler)
PG_RW 53 software (dirty bit emulation handler)
PG_A 0 hardware (aka EPT_PG_RD)
PG_M 1 hardware (aka EPT_PG_WR)
The idea to use the mapping listed above for A/D bit emulation came from
Alan Cox (alc@).
The final difference with respect to x86 PTEs is that some EPT implementations
do not support superpage mappings. This is recorded in the 'pm_flags' field
of the pmap.
TLB invalidation:
The amd64/pmap code has a number of ways to do invalidation of mappings
that may be cached in the TLB: single page, multiple pages in a range or the
entire TLB. All of these funnel into a single EPT invalidation routine called
'pmap_invalidate_ept()'. This routine bumps up the EPT generation number and
sends an IPI to the host cpus that are executing the guest's vcpus. On a
subsequent entry into the guest it will detect that the EPT has changed and
invalidate the mappings from the TLB.
Guest memory access:
Since the guest memory is no longer wired we need to hold the host physical
page that backs the guest physical page before we can access it. The helper
functions 'vm_gpa_hold()/vm_gpa_release()' are available for this purpose.
PCI passthru:
Guest's with PCI passthru devices will wire the entire guest physical address
space. The MMIO BAR associated with the passthru device is backed by a
vm_object of type OBJT_SG. An IOMMU domain is created only for guest's that
have one or more PCI passthru devices attached to them.
Limitations:
There isn't a way to map a guest physical page without execute permissions.
This is because the amd64/pmap code interprets the guest physical mappings as
user mappings since they are numerically below VM_MAXUSER_ADDRESS. Since PG_U
shares the same bit position as EPT_PG_EXECUTE all guest mappings become
automatically executable.
Thanks to Alan Cox and Konstantin Belousov for their rigorous code reviews
as well as their support and encouragement.
Thanks for John Baldwin for reviewing the use of OBJT_SG as the backing
object for pci passthru mmio regions.
Special thanks to Peter Holm for testing the patch on short notice.
Approved by: re
Discussed with: grehan
Reviewed by: alc, kib
Tested by: pho
aware drivers on Xen hypervisors that advertise support for some
HyperV features.
x86/xen/hvm.c:
When running in HVM mode on a Xen hypervisor, set vm_guest
to VM_GUEST_XEN so other virtualization aware components in
the FreeBSD kernel can detect this mode is active.
dev/hyperv/vmbus/hv_hv.c:
Use vm_guest to ignore Xen's HyperV emulation when Xen is
detected and Xen PV drivers are active.
Reported by: Shanker Balan
Submitted by: Roger Pau Monné
Sponsored by: Citrix Systems R&D
Reviewed by: gibbs
Approved by: re (Xen blanket)
Device level sysctls are already exposed as dev.ix.<device>
Fixing the case where number of queues for igb is auto-tuned and
hw.igb.num_queues does not return current/updated value.
Reviewed by: jfv
Approved by: re (delphij)
MFC after: 2 weeks
kmeminit() runs, so it contributes nothing to 'vm_kmem_size'; update a
comment to reflect that r254025 replaced the kmem submap with the kmem
arena.
Reviewed by: kib
Approved by: re (gjb)
Sponsored by: EMC / Isilon Storage Division
The changes are to:
* Use contigmalloc/contigfree which handling microcode buffer
* Use a different buffer to send microcode to each engine
* Swap microcode in little-endian compilation
* Fix freeback message queue id field
* Simplify xlp_get_rsa_opsize() to remove unnecessary checks
* Fix NULL check after use in xlp_free_cmd_params()
* Do better error handling when the hardware returns error
* Fix error codes in few cases
Submitted by: Vekatesh J. V. <venkatesh.vivekanandan@broadcom.com>
Approved by: re (hrs)
Updates to the Netlogic XLP on-chp RSA block driver. The changes are
to follow style(9) guidelines, to improve readability and to remove
unnecessary initialization.
No changes to logic have been introduced by this commit.
Submitted by: Venkatesh J. V. <venkatesh.vivekanandan@broadcom.com>
Approved by: re (hrs)
not strlen as they are *not* strings.
Discovered by GSOC student, Mike Ma <mikemandarine@gmail.com> during his
fuse.glusterfs port to FreeBSD.
Final patch from mckusick@
Submitted by: mckusick@
Approved by: re (hrs)
MFC after: 2 weeks
input path. These probes get some of the fields in host order, whereas the
output probes get them in network order, so a single translator isn't
enough. This workaround ensures that the problem is essentially invisble
to users: none of the probe arguments or their fields have changed.
Approved by: re (hrs)
is no sense to walk the whole dirty buffer queue. We are only
interested in, and can operate on, the buffers owned by the current
vnode [1]. Instead of calling generic queue flush routine, do
VOP_FSYNC() if possible.
Holding the dirty buffer queue lock in the bufdaemon, without dropping
it, can cause starvation of buffer writes from other threads. This is
esp. easy to reproduce on the big memory machines, where large files
are written, causing almost all dirty buffers accumulating in several
big files, which vnodes are locked by writers. Bufdaemon cannot flush
any buffer, but is iterating over the whole dirty queue
continuously. Since dirty queue mutex is not dropped, bufdone() in
g_up thread is starved, usually deadlocking the machine [2]. Mitigate
this by dropping the queue lock after the vnode is locked, allowing
other queue lock contenders to make a progress.
Discussed with: Jeff [1]
Reported by: pho [2]
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Approved by: re (hrs)
When calling to ib_uverbs_cleanup_ucontext, there is a call to
mutex_lock of xrcd_table_mutex, which was not initialized.
Added missing initialization for xrcd_table_mutex.
Submitted by: Orit Moskovich (oritm mellanox.com)
Approved by: re
Removed the ifdef linux from this function.
Added stub function for contiguous pages to avoid compilation
errors.
Submitted by: Orit Moskovich (oritm mellanox.com)
Approved by: re
