to multi-volume restores:
- In findinode(), keep a copy of header->c_type so that we don't
exit the do-while loop until we have processed the current header.
Exiting too early leaves curfile.ino set to 0, which confuses
the logic in createfiles(), so multi-volume restores with the
'x' command don't work if you follow the instructions and supply
the tapes in reverse order. This appears to have been broken
by CSRG revision 5.33 tape.c (Oct 1992).
- The logic in getvol() for deciding how many records to skip after
the volume header was confused; sometimes it would skip too few
records and sometimes too many, leading to "resync restore"
warnings and missing files. Skip to the next header only when
the current action is not `USING'. Work around a dump bug that
sets c_count incorrectly in the volume header of the first tape.
Some of the problems here date back to at least 1991.
- Back out revision 1.23. This appeared to avoid warnings about
missing files in the 'rN' verification case, but it made the
problems with the 'x' command worse by stopping getvol() from
even attempting to find the first inode number on the newly
inserted tape. The bug it addressed is fixed by correcting the
skipping logic as described above.
- Save the value of `tpblksread' in case the wrong volume is
supplied, because it is incremented each time we read a volume
header. We already saved `blksread' for the same reson.
Normally trewind() performs a close-open-close cycle to rewind the
tape when closing the device, but this is not ideal for fifos. We
now skip the final open-close if the output descriptor is a fifo.
PR: bin/25474
Submitted by: Alex Bakhtin <bakhtin@amt.ru>
MFC after: 1 week
blocks allocated by some inode. Indirect blocks are printed
recursively, so beware :), the list could become lengthy...
(We should probably add some output pager to fsdb.)
MFC after: 1 month
bloats the resulting binary file by forcing them out of .bss into
.data, while the C standard already guarantees them to become
initialized to 0 at program startup.
MFC after: 1 week
Cure the "lets put everything in registers" ailment.
Set WARNS=2
Fix two problems where casting messed up large quotafiles.
PR: 34108
Submitted by: Maxim Katargin <kmv@asplinux.ru>
MFC after: 3 weeks
This works by retokenizing a line with a split limit so that if the
argument count for a command is greater than the number of arguments
formed by splitting apart the line of user input, the last argument
is instead all of the remainder of the input line.
Yes, I needed this capability at one point to fix a filesystem manually,
which happened to break with a problematic space-containing directory
entry.
This allows obtaining crash dumps from the panics occured during late stages
of kernel initialisation before system enters into single-user mode.
MFC after: 2 weeks
Any of readfds, writefds, and exceptfds may be given as nil
pointers if no descriptors are of interest.
neither wfds nor efds were of interest so now they are nil.
also, do a little better then making an educated guess for nfds.
time_to_xxx() and xxx_to_time() functions. e.g. _time_to_xxx()
instead of time_to_xxx(), to make it more obvious that these are
stopgap functions & placemarkers and not meant to create a defacto
standard. They will eventually be replaced when a real standard
comes out of committee.
camcontrol.
This enables rescanning all busses or resetting all busses in a system.
The current implementation is not the ideal way to do it -- the ideal way
to do it would be for the transport layer to handle wildcarded busses on
bus rescan and reset operations. The current implementation enumerates all
the busses and sends a rescan or reset CCB individually. Handling this
behavior in the transport layer will happen later.
Reviewed by: imp
Tested by: joerg
MFC after: 1 week
socket so that routing daemons and other interested parties
know when an interface is attached/detached.
PR: kern/33747
Obtained from: NetBSD
MFC after: 2 weeks
variable RELEASE_BUILD_FIXIT is defined, a camcontrol binary will be
built that only knows the "rescan" and "reset" subcommands. The
resulting code is small enough to still fit onto the boot floppy.
Reviewed by: ken
MFC after: 1 week
not return ENOBUFS for unreliable protocols like divert.
This should fix an issue when natd(8) keeps spamming already
full dummynet(4) queues with the same packet forever.
Spotted by: chkno@dork.com
Explained by: luigi
Reviewed by: Ari Suutari <ari.suutari@syncrontech.com>
MFC after: 2 weeks
The first "synopsis" example has a "[/prefixlength]" which shouldn't
be there, since that stuff is part of the preceeding "address" as is
explained in the description of "address".
(The way it is now, 192.168.0.1/16/prefixlength would be a proper
operand. Note that "prefixlength" is not mentioned by name anywhere.)
PR: 32462
Submitted by: Gary W. Swearingen <swear@blarg.net>
disklabel(8)'s "Reading the disk label" section starts out "To examine
or save the label on a disk drive,...". This is confusing. The given
command (disklabel [-r] disk) doesn't save anything (except to standard
out, but that should go without saying). It reads as if the command
might save something on the disk drive.
PR: 32452
Submitted by: Gary W. Swearingen <swear@blarg.net>
reinserted by a userland process, will lose a number of packet
attributes, including their source interface. This may affect
the behavior of later rules, and while not strictly a BUG, may
cause unexpected behavior if not clearly documented. A similar
note for natd(8) might be desirable.
ipfirewall(4) to the IMPLEMENTATION NOTES section because it
considers kernel internals and may confuse newbies if placed
at the very beginning of the manpage (where it used to be previously.)
Not objected by: luigi
a packed array so sizeof work. This broke RFMON mode and passing
up 802.11 packets.
The Linux emulation code was derived from the open source Linux driver to
maintain compatibility.
LEAP support is added, hints from Richard Johnson. I've verified this
locally with PC350v42510.img firmware. More bug fixing from Marco to
fix long passwords.
Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep
so it doesn't look like your system died during a flash update.
Install header files in /usr/include/dev/an
Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol.
This way you can manage 2 keys a little easier. Map the home mode into
key 5. Enhance ifconfig to dump the various configured SSIDs. I use
a bunch of different ones and roam between them. Use the syntax similar
to the WEP keys to deal with setting difference SSIDs.
Bump up up the Card capabilities RID since they added 2 bytes to it
in the latest firmware. Thankfully we changed it from a terminal
failure so the card still worked but the driver whined.
Some cleanup patches from Marco Molteni.
Submitted by: Richard Johnson <raj@cisco.com>
Marco Molteni <molter@tin.it>
and myself
Various checks: David Wolfskill <david@catwhisker.org>
Reviewed by: Brooks Davis <brooks@freebsd.org>
Warner Losh <imp@freebsd.org>
Approved by: Brooks Davis <brooks@freebsd.org>
Warner Losh <imp@freebsd.org>
Obtained from: Linux emulation API's from Aironet driver.
of unused partition entries and later detection of unused entries.
Use memcpy to be consistent with the rest of the code, and fix a
minor style nit.
Submitted by: bde
a special file on the command line, eg:
sysctl kern.dumpdev=/dev/ad1s1b
In parse(), when a value is given for a CTLTYPE_QUAD variable,
newval and newsize erroneously fail to be set because of an early
"break".
show_var() contains code that duplicates the functionality of the
oidfmt() function.
PR: 33151, 33150
Submitted by: Thomas Quinot <thomas@cuivre.fr.eu.org>
