When we are passing mbuf to IPSec processing via ipsec[46]_process_packet(),
we hold one reference to security policy and release it just after return
from this function. But IPSec processing can be deffered and when we release
reference to security policy after ipsec[46]_process_packet(), user can
delete this security policy from SPDB. And when IPSec processing will be
done, xform's callback function will do access to already freed memory.
To fix this move KEY_FREESP() into callback function. Now IPSec code will
release reference to SP after processing will be finished.
Differential Revision: https://reviews.freebsd.org/D2324
No objections from: #network
Sponsored by: Yandex LLC
public_ifa6 may be set to NULL after taking a reference to a previous
address list element. Instead, only take the reference after leaving the
loop but before releasing the address list lock.
Differential Revision: https://reviews.freebsd.org/D2253
Reviewed by: ae
MFC after: 2 weeks
interface index is specified as zero, the system should select the
interface to use for outgoing multicast packets. Even the comment
for the in6p_set_multicast_if() function says about index of zero.
But in fact for zero index the function just returns EADDRNOTAVAIL.
I.e. if you first set some interface and then will try reset it
with zero ifindex, you will get EADDRNOTAVAIL.
Reset im6o_multicast_ifp to NULL when interface index specified as
zero. Also return EINVAL in case when ifnet_byindex() returns NULL.
This will be the same behaviour as when ifindex is bigger than
V_if_index. And return EADDRNOTAVAIL only when interface is not
multicast capable.
Reported by: Olivier Cochard-Labbé
MFC after: 2 weeks
Sponsored by: Yandex LLC
It is acceptable that the size can be equal to MCLBYTES. In the later
KAME's code this check has been moved under DIAGNOSTIC ifdef, because
the size of NA and NS is much smaller than MCLBYTES. So, it is safe to
replace the check with KASSERT.
PR: 199304
Discussed with: glebius
MFC after: 1 week
Defer the packet size check until after the firewall has had a look at it. This
means that the firewall now has the opportunity to (re-)fragment an oversized
packet.
Differential Revision: https://reviews.freebsd.org/D1815
Reviewed by: ae
Approved by: gnn (mentor)
contain kernel pointers, and instead has interface index.
Bump __FreeBSD_version for that change.
o Now, netstat/mroute6.c no longer needs to kvm_read(3) struct ifnet, and
no longer needs to include if_var.h
Note that this change is far from being a complete move of IPv6 multicast
routing to a proper API. Other structures are still dumped into their
sysctls as is, requiring userland application to #define _KERNEL when
including ip6_mroute.h and then call kvm_read(3) to gather all bits and
pieces. But fixing this is out of scope of the opaque ifnet project.
Sponsored by: Nginx, Inc.
Sponsored by: Netflix
We'll just fall into the same local delivery block under the
'if (m->m_flags & M_FASTFWD_OURS)'.
Suggested by: ae
Differential Revision: https://reviews.freebsd.org/D2225
Approved by: gnn (mentor)
When forwarding fragmented IPv6 packets and filtering with PF we
reassemble and refragment. That means we generate new fragment headers
and a new fragment ID.
We already save the fragment IDs so we can do the reassembly so it's
straightforward to apply the incoming fragment ID on the refragmented
packets.
Differential Revision: https://reviews.freebsd.org/D2188
Approved by: gnn (mentor)
- Add no_dad and ignoreloop per-IF knob. no_dad disables DAD completely,
and ignoreloop is to prevent infinite loop in loopback probing state when
loopback is permanently expected.
When several threads are trying to send datagram to the same destination,
but fragmentation is disabled and datagram size exceeds link MTU,
ip6_output() calls pfctlinput2(PRC_MSGSIZE). It does notify all
sockets wanted to know MTU to this destination. And since all threads
hold PCB lock while sending, taking the lock for each PCB in the
in6_pcbnotify() leads to deadlock.
RFC 3542 p.11.3 suggests notify all application wanted to receive
IPV6_PATHMTU ancillary data for each ICMPv6 packet too big message.
But it doesn't require this, when we don't receive ICMPv6 message.
Change ip6_notify_pmtu() function to be able use it directly from
ip6_output() to notify only one socket, and to notify all sockets
when ICMPv6 packet too big message received.
PR: 197059
Differential Revision: https://reviews.freebsd.org/D1949
Reviewed by: no objection from #network
Obtained from: Yandex LLC
MFC after: 1 week
Sponsored by: Yandex LLC
to initialize mbuf's fibnum. Uninitialized fibnum value can lead to
panic in the routing code. Currently we use only RT_DEFAULT_FIB value
for initialization.
Differential Revision: https://reviews.freebsd.org/D1998
Reviewed by: hrs (previous version)
Sponsored by: Yandex LLC
draft-ietf-6man-enhanced-dad-13.
This basically adds a random nonce option (RFC 3971) to NS messages
for DAD probe to detect a looped back packet. This looped back packet
prevented DAD on some pseudo-interfaces which aggregates multiple L2 links
such as lagg(4).
The length of the nonce is set to 6 bytes. This algorithm can be disabled by
setting net.inet6.ip6.dad_enhanced sysctl to 0 in a per-vnet basis.
Reported by: hiren
Reviewed by: ae
Differential Revision: https://reviews.freebsd.org/D1835
represents a context.
- Preserve name 'struct mld_ifinfo' for a new structure, that will be stable
API between userland and kernel.
- Make sysctl_mld_ifinfo() return the new 'struct mld_ifinfo', instead of
old one, which had a bunch of internal kernel structures in it.
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
and arp were being used. They basically would pass in the
mutex to the callout_init. Because they used this method
to the callout system, it was possible to "stop" the callout.
When flushing the table and you stopped the running callout, the
callout_stop code would return 1 indicating that it was going
to stop the callout (that was about to run on the callout_wheel blocked
by the function calling the stop). Now when 1 was returned, it would
lower the reference count one extra time for the stopped timer, then
a few lines later delete the memory. Of course the callout_wheel was
stuck in the lock code and would then crash since it was accessing
freed memory. By using callout_init(c, 1) we always get a 0 back
and the reference counting bug does not rear its head. We do have
to make a few adjustments to the callouts themselves though to make
sure it does the proper thing if rescheduled as well as gets the lock.
Commented upon by hiren and sbruno
See Phabricator D1777 for more details.
Commented upon by hiren and sbruno
Reviewed by: adrian, jhb and bz
Sponsored by: Netflix Inc.
bits.
The motivation here is to eventually teach netisr and potentially
other networking subsystems a bit more about how RSS work queues / buckets
are configured so things have a hope of auto-configuring in the future.
* net/rss_config.[ch] takes care of the generic bits for doing
configuration, hash function selection, etc;
* topelitz.[ch] is now in net/ rather than netinet/;
* (and would be in libkern if it didn't directly include RSS_KEYSIZE;
that's a later thing to fix up.)
* netinet/in_rss.[ch] now just contains the IPv4 specific methods;
* and netinet/in6_rss.[ch] now just contains the IPv6 specific methods.
This should have no functional impact on anyone currently using
the RSS support.
Differential Revision: D1383
Reviewed by: gnn, jfv (intel driver bits)
use ifqueue at all. Second, there is no point in this lockless check.
Either positive or negative result of the check could be incorrect after
a tick.
Sponsored by: Nginx, Inc.
handle it in arc_output() instead of nd6_storelladdr().
* Remove IFT_ARCNET check from arpresolve() since arc_output() does not
use arpresolve() to handle broadcast/multicast. This check was there
since r84931. It looks like it was not used since r89099 (initial
import of Arcnet support where multicast is handled separately).
* Remove IFT_IEEE1394 case from nd6_storelladdr() since firewire_output()
calles nd6_storelladdr() for unicast addresses only.
* Remove IFT_ARCNET case from nd6_storelladdr() since arc_output() now
handles multicast by itself.
As a result, we have the following pattern: all non-ethernet-style
media have their own multicast map handling inside their appropriate
routines. On the other hand, arpresolve() (and nd6_storelladdr()) which
meant to be 'generic' ones de-facto handles ethernet-only multicast maps.
MFC after: 3 weeks
hold mbuf chain instead of calling full-blown nd6_output_lle()
for each packet. This simplifies both callers and nd6_output_lle()
implementation.
* Make nd6_output_lle() static and remove now-unused lle and chain
arguments.
* Rename nd6_output_flush() -> nd6_flush_holdchain() to be consistent.
* Move all pre-send transmit hooks to newly-created nd6_output_ifp().
Now nd6_output(), nd6_output_lle() and nd6_flush_holdchain() are using
it to send mbufs to if_output.
* Remove SeND hook from nd6_na_input() because it was implemented
incorrectly since the beginning (r211501):
- it tagged initial input mbuf (m) instead of m_hold
- tagging _all_ mbufs in holdchain seems to be wrong anyway.
the knowledge of mbuf layout, and in particular constants such as M_EXT,
MLEN, MHLEN, and so on, in mbuf consumers by unifying various alignment
utility functions (M_ALIGN(), MH_ALIGN(), MEXT_ALIGN() in a single
M_ALIGN() macro, implemented by a now-inlined m_align() function:
- Move m_align() from uipc_mbuf.c to mbuf.h; mark as __inline.
- Reimplement M_ALIGN(), MH_ALIGN(), and MEXT_ALIGN() using m_align().
- Update consumers around the tree to simply use M_ALIGN().
This change eliminates a number of cases where mbuf consumers must be aware
of whether or not mbufs returned by the allocator use external storage, but
also assumptions about the size of the returned mbuf. This will make it
easier to introduce changes in how we use external storage, as well as
features such as variable-size mbufs.
Differential Revision: https://reviews.freebsd.org/D1436
Reviewed by: glebius, trasz, gnn, bz
Sponsored by: EMC / Isilon Storage Division
rather than passing them in by value.
The eventual aim is to do incremental hash construction rather than
all of the memcpy()'ing into a contiguous buffer for the hash
function, which does show up as taking quite a bit of CPU during
profiling.
Tested:
* a variety of laptops/desktop setups I have, with v6 connectivity
Differential Revision: D1404
Reviewed by: bz, rpaulo
ipsec6_in_reject() does the same things, also it counts policy violation
errors.
Do IPSEC check in the ip6_forward() after addresses checks.
Also use ip6_ipsec_fwd() to make code similar to IPv4 implementation.
Obtained from: Yandex LLC
Sponsored by: Yandex LLC
ipsec_getpolicybyaddr()
ipsec4_checkpolicy()
ip_ipsec_output()
ip6_ipsec_output()
The only flag used here was IP_FORWARDING.
Obtained from: Yandex LLC
Sponsored by: Yandex LLC
Remove check for presence PACKET_TAG_IPSEC_IN_DONE mbuf tag from
ip_ipsec_fwd(). PACKET_TAG_IPSEC_IN_DONE tag means that packet is
already handled by IPSEC code. This means that before IPSEC processing
it was destined to our address and security policy was checked in
the ip_ipsec_input(). After IPSEC processing packet has new IP
addresses and destination address isn't our own. So, anyway we can't
check security policy from the mbuf tag, because it corresponds
to different addresses.
We should check security policy that corresponds to packet
attributes in both cases - when it has a mbuf tag and when it has not.
Obtained from: Yandex LLC
Sponsored by: Yandex LLC
security policy. The changed block of code in ip*_ipsec_input() is
called when packet has ESP/AH header. Presence of
PACKET_TAG_IPSEC_IN_DONE mbuf tag in the same time means that
packet was already handled by IPSEC and reinjected in the netisr,
and it has another ESP/AH headers (encrypted twice?).
Since it was already processed by IPSEC code, the AH/ESP headers
was already stripped (and probably outer IP header was stripped too)
and security policy from the tdb_ident was applied to those headers.
It is incorrect to apply this security policy to current headers.
Also make ip_ipsec_input() prototype similar to ip6_ipsec_input().
Obtained from: Yandex LLC
Sponsored by: Yandex LLC
PACKET_TAG_IPSEC_OUT_CRYPTO_NEEDED mbuf tags. They aren't used in FreeBSD.
Instead check presence of PACKET_TAG_IPSEC_OUT_DONE mbuf tag. If it
is found, bypass security policy lookup as described in the comment.
PACKET_TAG_IPSEC_OUT_DONE tag added to mbuf when IPSEC code finishes
ESP/AH processing. Since it was already finished, this means the security
policy placed in the tdb_ident was already checked. And there is no reason
to check it again here.
Obtained from: Yandex LLC
Sponsored by: Yandex LLC
