the syscall code and acquires various event subsystem locks as needed.
The handling of the NOTE_TRACK for EVFILT_PROC is currently done by
calling the kqueue_register() from filt_proc() filter, causing recursive
entrance of the kqueue code. This results in the LORs and recursive
acquisition of the locks.
Implement the variant of the knote() function designed to only handle
the fork() event. It mostly copies the knote() body, but also handles
the NOTE_TRACK, removing the handling from the filt_proc(), where it
causes problems described above. The function is called from the fork1()
instead of knote().
When encountering NOTE_TRACK knote, it marks the knote as influx
and drops the knlist and kqueue lock. In this context call to
kqueue_register is safe from the problems.
An error from the kqueue_register() is reported to the observer as
NOTE_TRACKERR fflag.
PR: 108201
Reviewed by: jhb, Pramod Srinivasan <pramod juniper net> (previous version)
Discussed with: jmg
Tested by: pho
MFC after: 2 weeks
KQ_FLUX_WAKEUP(). Since the later macro clears the KQ_FLUXWAIT, the
kqueue_scan() thread may be not woken up.
Move the setting of KQ_FLUXWAIT after wakeup to correct the issue.
Reported and tested by: pho
MFC after: 3 days
hand, it may cause other threads to sleep since kqueue_scan() may mark
some knotes as infux. This could lead to the deadlock.
Before kqueue_scan() sleeps, wakeup the threads that are waiting for the
influx knotes produced by this thread.
Tested by: pho (previous version)
Reviewed by: jmg
MFC after: 2 weeks
closed is the legitimate situation. For instance, filedescriptor with
registered events may be closed in parallel with closing the kqueue.
Properly handle the case instead of asserting that this cannot happen.
Reported and tested by: pho
Reviewed by: jmg
MFC after: 2 weeks
after each SYSINIT() macro invocation. This makes a number of
lightweight C parsers much happier with the FreeBSD kernel
source, including cflow's prcc and lxr.
MFC after: 1 month
Discussed with: imp, rink
This makes it possible to support ftruncate() on non-vnode file types in
the future.
- 'struct fileops' grows a 'fo_truncate' method to handle an ftruncate() on
a given file descriptor.
- ftruncate() moves to kern/sys_generic.c and now just fetches a file
object and invokes fo_truncate().
- The vnode-specific portions of ftruncate() move to vn_truncate() in
vfs_vnops.c which implements fo_truncate() for vnode file types.
- Non-vnode file types return EINVAL in their fo_truncate() method.
Submitted by: rwatson
- Introduce a finit() which is used to initailize the fields of struct file
in such a way that the ops vector is only valid after the data, type,
and flags are valid.
- Protect f_flag and f_count with atomic operations.
- Remove the global list of all files and associated accounting.
- Rewrite the unp garbage collection such that it no longer requires
the global list of all files and instead uses a list of all unp sockets.
- Mark sockets in the accept queue so we don't incorrectly gc them.
Tested by: kris, pho
details from consumers.
- Track individual selecters on a per-descriptor basis such that there
are no longer collisions and after sleeping for events only those
descriptors which triggered events must be rescaned.
- Protect the selinfo (per descriptor) structure with a mtx pool mutex.
mtx pool mutexes were chosen to preserve api compatibility with
existing code which does nothing but bzero() to setup selinfo
structures.
- Use a per-thread wait channel rather than a global wait channel.
- Hide select implementation details in a seltd structure which is
opaque to the rest of the kernel.
- Provide a 'selsocket' interface for those kernel consumers who wish to
select on a socket when they have no fd so they no longer have to
be aware of select implementation details.
Tested by: kris
Reviewed on: arch
and flags with an sxlock. This leads to a significant and measurable
performance improvement as a result of access to shared locking for
frequent lookup operations, reduced general overhead, and reduced overhead
in the event of contention. All of these are imported for threaded
applications where simultaneous access to a shared file descriptor array
occurs frequently. Kris has reported 2x-4x transaction rate improvements
on 8-core MySQL benchmarks; smaller improvements can be expected for many
workloads as a result of reduced overhead.
- Generally eliminate the distinction between "fast" and regular
acquisisition of the filedesc lock; the plan is that they will now all
be fast. Change all locking instances to either shared or exclusive
locks.
- Correct a bug (pointed out by kib) in fdfree() where previously msleep()
was called without the mutex held; sx_sleep() is now always called with
the sxlock held exclusively.
- Universally hold the struct file lock over changes to struct file,
rather than the filedesc lock or no lock. Always update the f_ops
field last. A further memory barrier is required here in the future
(discussed with jhb).
- Improve locking and reference management in linux_at(), which fails to
properly acquire vnode references before using vnode pointers. Annotate
improper use of vn_fullpath(), which will be replaced at a future date.
In fcntl(), we conservatively acquire an exclusive lock, even though in
some cases a shared lock may be sufficient, which should be revisited.
The dropping of the filedesc lock in fdgrowtable() is no longer required
as the sxlock can be held over the sleep operation; we should consider
removing that (pointed out by attilio).
Tested by: kris
Discussed with: jhb, kris, attilio, jeff
system calls now enter without Giant held, and then in some cases, acquire
Giant explicitly.
Remove a number of other MPSAFE annotations in the credential code and
tweak one or two other adjacent comments.
programs to find out exactly which events were registered and which were
returned... This should be lower in kern_kevent, but that would require
special munging due to locks and the functions used to copyin/copyout
kevents...
If someone wants to teach ktrace how to output pretty kevents, I have a
kevent prety printer that can be used...
than keeping it locked until we exit the function to optimize the case
where the lock would be dropped and later reacquired. The optimization
was broken when kevent's were moved from UFS to VFS and the knote list
lock for a vnode kevent became the lockmgr vnode lock. If one tried
to use a kqueue that contained events for a kqueue fd followed by a vnode,
then the kq global lock would end up being held when the vnode lock was
acquired which could result in sleeping with a mutex held (and subsequent
panics) if the vnode lock was contested.
Reviewed by: jmg
Tested by: ps (on 6.x)
MFC after: 3 days
a race where data could come in before we clear the INFLUX flag, and get
skipped over by knote (and hence never be activated, though it should of
been)...
Found by: glebius & co.
Reviewed by: glebius
MFC after: 3 days
notifications when LIO operations completed. These were the problems
with LIO event complete notification:
- Move all LIO/AIO event notification into one general function
so we don't have bugs in different data paths. This unification
got rid of several notification bugs one of which if kqueue was
used a SIGILL could get sent to the process.
- Change the LIO event accounting to count all AIO request that
could have been split across the fast path and daemon mode.
The prior accounting only kept track of AIO op's in that
mode and not the entire list of operations. This could cause
a bogus LIO event complete notification to occur when all of
the fast path AIO op's completed and not the AIO op's that
ended up queued for the daemon.
Suggestions from: alc
- Introducing the possibility of using locks different than mutexes
for the knlist locking. In order to do this, we add three arguments to
knlist_init() to specify the functions to use to lock, unlock and
check if the lock is owned. If these arguments are NULL, we assume
mtx_lock, mtx_unlock and mtx_owned, respectively.
- Using the vnode lock for the knlist locking, when doing kqueue operations
on a vnode. This way, we don't have to lock the vnode while holding a
mutex, in filt_vfsread.
Reviewed by: jmg
Approved by: re (scottl), scottl (mentor override)
Pointyhat to: ssouhlal
Will be happy: everyone
w/o problems than I was before... This simply brings back the knote_delete
as knlist_delete which will also drop the knote's, instead of just clearing
the list and seeing _ONESHOT...
Fix a race where if a note was _INFLUX and _DETACHED, it could end up being
modified... whoopse..
MFC after: 1 week
Prodded by: ambrisko and dwhite
Use this in all the places where sleeping with the lock held is not
an issue.
The distinction will become significant once we finalize the exact
lock-type to use for this kind of case.
happens when a proc exits, but needs to inform the user that this has
happened.. This also means we can remove the check for detached from
proc and sig f_detach functions as this is doing in kqueue now...
MFC after: 5 days
a more complete subsystem, and removes the knowlege of how things are
implemented from the drivers. Include locking around filter ops, so a
module like aio will know when not to be unloaded if there are outstanding
knotes using it's filter ops.
Currently, it uses the MTX_DUPOK even though it is not always safe to
aquire duplicate locks. Witness currently doesn't support the ability
to discover if a dup lock is ok (in some cases).
Reviewed by: green, rwatson (both earlier versions)
Giant conditional on debug.mpsafenet in the socket soo_stat() routine,
unconditionally in vn_statfile() for VFS, and otherwise don't acquire
Giant. Accept an unlocked read in kqueue_stat(), and cryptof_stat() is
a no-op. Don't acquire Giant in fstat() system call.
Note: in fdescfs, fo_stat() is called while holding Giant due to the VFS
stack sitting on top, and therefore there will still be Giant recursion
in this case.
