flag value is already exposed via dv_flags, just not the meaning of the
flags themselves. Use these constants to annotate devices that are
disabled or suspended in devinfo output.
usr.sbin/syslogd/syslogd.c:1023:10: error: address of array 'f->f_prevline' will always evaluate to 'true' [-Werror,-Wpointer-bool-conversion]
f->f_prevline && !strcmp(msg, f->f_prevline) &&
~~~^~~~~~~~~~
usr.sbin/syslogd/syslogd.c:1178:16: error: address of array 'f->f_prevline' will always evaluate to 'true' [-Werror,-Wpointer-bool-conversion]
} else if (f->f_prevline) {
~~ ~~~^~~~~~~~~~
In both cases, the f_prevline field of struct filed is a char array, so
it can never be null. Remove the checks.
Reviewed by: jilles
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D1716
initiator iSCSI offload. Pass maximum data segment size supported by
chosen offload module to iscsid(8), and make iscsid(8) not try to negotiate
anything larger than that.
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
While ctld(8) still does not allow multiple portal groups per target
to be configured, kernel should now be able to handle it.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
Replace iSCSI-specific LUN mapping mechanism with new one, working for any
ports. By default all ports are created without LUN mapping, exposing all
CTL LUNs as before. But, if needed, LUN mapping can be manually set on
per-port basis via ctladm. For its iSCSI ports ctld does it via ioctl(2).
The next step will be to teach ctld to work with FibreChannel ports also.
Respecting additional flexibility of the new mechanism, ctl.conf now allows
alternative syntax for LUN definition. LUNs can now be defined in global
context, and then referenced from targets by unique name, as needed. It
allows same LUN to be exposed several times via multiple targets.
While there, increase limit for LUNs per target in ctld from 256 to 1024.
Some initiators do not support LUNs above 255, but that is not our problem.
Discussed with: trasz
MFC after: 2 weeks
Relnotes: yes
Sponsored by: iXsystems, Inc.
assume that GPT means UEFI boot, resulting in the installation of
uninstallable systems. This needs a little more work before MFC, in
particular based on disk size (> 2 TB + BIOS + MBR is not workable). That
will come soon.
This option allows for specifying the directory to use as the location for
kernel source files. This option was ported from NetBSD.
GitHub Pull Request: https://github.com/freebsd/freebsd/pull/18
Submitted by: Steve Kiernan <stevek@juniper.net>, Simon Gerraty <sjg@juniper.net>
Obtained from: Juniper Networks, Inc.
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D1722
Relnotes: yes
usr.sbin/ppp/command.c:2054:74: error: address of array 'arg->bundle->radius.cfg.file'
will always evaluate to 'true' [-Werror,-Wpointer-bool-conversion]
if (arg->bundle->radius.alive.interval && !arg->bundle->radius.cfg.file) {
~~~~~~~~~~~~~~~~~~~~~~~~~^~~~
In all cases, the file field of struct radius is a char array, but the
intent was to check whether the string is empty, so add an indirection
to achieve that. Use a similar approach for the sockname field of
struct server.
usr.sbin/pciconf/pciconf.c:237:12: error: address of array 'p->pd_name' will
always evaluate to 'true' [-Werror,-Wpointer-bool-conversion]
(p->pd_name && *p->pd_name) ? p->pd_name :
~~~^~~~~~~ ~~
usr.sbin/pciconf/pciconf.c:239:12: error: address of array 'p->pd_name' will
always evaluate to 'true' [-Werror,-Wpointer-bool-conversion]
(p->pd_name && *p->pd_name) ? (int)p->pd_unit :
~~~^~~~~~~ ~~
The pd_name field of struct pci_conf is an array, so it can never be null.
Remove the unnecessary check.
uid and gid are never and should never be negative. The pw(8) manpage clearly
states the -u and -g arguments are for uids/gids, hence using negative values is
abusing a bug in former versions of pw(8)
Config files built using this version that take advantage of the bugfix
won't be buildable using older config(8).
Submitted by: imp
MFC after: 1 week
MFC with: 277567
usr.sbin/config/config.y
According to config(5), the "device", "devices",
"nodevice", "nodevices", "option", "options",
"nooption", and "nooptions" keywords can all take a
comma-separated list of values. However, the yacc code
did not allow lists for "nooption" and "nooptions", only
single values. This commit fixes the yacc code to allow
comma separated values for all the above keywords.
Submitted by: asomers
MFC after: 1 week
Sponsored by: Spectra Logic
MFSpectraBSD: 1095296 on 2014/10/07
Round up calculated values for iops and average time per io to avoid a
shifting display if there are 1000+ (or even 10000+) iops, or if an
average time per io column is 1000+ ms.
Reviewed by: ken
MFC after: 1 week
Sponsored by: Spectra Logic
MFSpectraBSD: 1089947 on 2014/09/26
1093625 on 2014/09/29
1093650 on 2014/09/29
1095662 on 2014/10/09
in the "hosts" array and eventually looks up the network address with
getaddrinfo(). At one point it checks for a numeric address and if it
sees one, it sets a hint parameter to force getaddrinfo to interpret the
host as a numeric address. However that hint is not cleared for subsequent
iterations of the loop and if any hosts seen after this point are host names,
getaddrinfo will fail on the name. The result of this bug is that you cannot
pass a host name to the -h flag.
Unfortunately, the first iteration will either process ::1 or 127.0.0.1,
so the flag is set on the first iteration and all host names will fail
to be processed.
The same bug applies to rpc.lockd and rpc.statd, so fix them too.
Differential Revision: https://reviews.freebsd.org/D1507
Reported by: Dylan Martin
MFC after: 1 week
Sponsored by: Sandvine Inc.
Keep track of the next instruction to be executed by the vcpu as 'nextrip'.
As a result the VM_RUN ioctl no longer takes the %rip where a vcpu should
start execution.
Also, instruction restart happens implicitly via 'vm_inject_exception()' or
explicitly via 'vm_restart_instruction()'. The APIs behave identically in
both kernel and userspace contexts. The main beneficiary is the instruction
emulation code that executes in both contexts.
bhyve(8) VM exit handlers now treat 'vmexit->rip' and 'vmexit->inst_length'
as readonly:
- Restarting an instruction is now done by calling 'vm_restart_instruction()'
as opposed to setting 'vmexit->inst_length' to 0 (e.g. emulate_inout())
- Resuming vcpu at an arbitrary %rip is now done by setting VM_REG_GUEST_RIP
as opposed to changing 'vmexit->rip' (e.g. vmexit_task_switch())
Differential Revision: https://reviews.freebsd.org/D1526
Reviewed by: grehan
MFC after: 2 weeks
Some users build FreeBSD as non-root in Perforce workspaces. By default,
Perforce sets files read-only unless they're explicitly being edited.
As a result, the -f argument must be used to cp in order to override the
read-only flag when copying source files to object directories. Bare use of
'cp' should be avoided in the future.
Update all current users of 'cp' in the src tree.
Reviewed by: emaste
MFC after: 1 week
Sponsored by: Spectra Logic
For 64-bit binaries the Elf_Ehdr e_shoff is at offset 40, not 44.
Instead of using an incorrect hardcoded offset, let the compiler
figure it out for us with offsetof().
Differential Revision: https://reviews.freebsd.org/D1543
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
associating an optional PNP hint table with this module. In the
future, when these are added, these changes will silently ignore the
new type they would otherwise warn about. It will always be safe to
ignore this data. Get this into the builds today for some future
proofing.
MFC After: 3 days
go back through HASWELL, IVY_BRIDGE, IVY_BRIDGE_XEON and SANDY_BRIDGE
to straighten out all the missing PMCs. We also add a new pmc tool
pmcstudy, this allows one to run the various formulas from
the documents "Using Intel Vtune Amplifier XE on XXX Generation platforms" for
IB/SB and Haswell. The tool also allows one to postulate your own
formulas with any of the various PMC's. At some point I will enahance
this to work with Brendan Gregg's flame-graphs so we can flamegraph
various PMC interactions. Note the manual page also needs some
work (lots of work) but gnn has committed to help me with that ;-)
Reviewed by: gnn
MFC after:1 month
Sponsored by: Netflix Inc.
To be able to info pages consider installing texinfo from ports print/texinfo or
via pkg: pkg install texinfo
Differential Revision: https://reviews.freebsd.org/D1409
Reviewed by: emaste, imp (previous version)
Relnotes: yes
