Commit Graph

61 Commits

Author SHA1 Message Date
phk
0ae911eb0e Gigacommit to improve device-driver source compatibility between
branches:

Initialize struct cdevsw using C99 sparse initializtion and remove
all initializations to default values.

This patch is automatically generated and has been tested by compiling
LINT with all the fields in struct cdevsw in reverse order on alpha,
sparc64 and i386.

Approved by:    re(scottl)
2003-03-03 12:15:54 +00:00
des
2756b6c964 More low-hanging fruit: kill caddr_t in calls to wakeup(9) / [mt]sleep(9). 2003-03-02 16:54:40 +00:00
schweikh
d3367c5f5d Correct typos, mostly s/ a / an / where appropriate. Some whitespace cleanup,
especially in troff files.
2003-01-01 18:49:04 +00:00
bde
8e5d7bb37a Fixed some style bugs in the removal of __P(()). The main ones were
not removing tabs before "__P((", and not outdenting continuation lines
to preserve non-KNF lining up of code with parentheses.  Switch to KNF
formatting and/or rewrap the whole prototype in some cases.
2002-03-23 16:01:49 +00:00
alfred
728484a745 Remove __P. 2002-03-20 07:51:46 +00:00
julian
5596676e6c KSE Milestone 2
Note ALL MODULES MUST BE RECOMPILED
make the kernel aware that there are smaller units of scheduling than the
process. (but only allow one thread per process at this time).
This is functionally equivalent to teh previousl -current except
that there is a thread associated with each process.

Sorry john! (your next MFC will be a doosie!)

Reviewed by: peter@freebsd.org, dillon@freebsd.org

X-MFC after:    ha ha ha ha
2001-09-12 08:38:13 +00:00
msmith
c0b2e95ea2 Revert previous "fix"; bus mice still have to be manually probed even in
the presence of PnP data.

Submitted by:	yokota
2001-08-31 02:14:34 +00:00
msmith
67f0d41957 Correct usage of ISA_PNP_PROBE 2001-08-30 09:16:53 +00:00
phk
c47745e977 Send the remains (such as I have located) of "block major numbers" to
the bit-bucket.
2001-03-26 12:41:29 +00:00
wollman
0fbfe85a3c Finish deprecating <sys/select.h> in favor of <sys/selinfo.h> in kernel code. 2001-01-20 02:24:07 +00:00
phk
410d456c0b Initiate deorbit burn sequence for <machine/mouse.h>.
Replace all in-tree uses with <sys/mouse.h> which repo-copied a few
moments ago from src/sys/i386/include/mouse.h by peter.
This is also the appropriate fix for exo-tree sources.

Put warnings in <machine/mouse.h> to discourage use.
November 15th 2000 the warnings will be converted to errors.
January 15th 2001 the <machine/mouse.h> files will be removed.
2000-10-09 08:08:36 +00:00
yokota
1385bc5ace - `Newbus'ified the driver.
- Properly keep track of resources (I/O ports and irq).
- Use bus_space_read/write() to access the ports.
- Add PnP IDs.
- Add a watchdog timer in case interrupts are lost (experimental).
- Add `detach' function (experimental).
2000-03-18 15:13:30 +00:00
peter
7b46b1fff9 Remove a bunch of unused (NO-OP) #if NFOO > 0 type includes and some
#include "foo.h" headers.
2000-01-29 16:17:36 +00:00
yokota
48291e20e3 - Remove cdevsw_add(). 1999-10-06 13:03:09 +00:00
phk
e9e0512210 Remove five now unused fields from struct cdevsw. They should never
have been there in the first place.  A GENERIC kernel shrinks almost 1k.

Add a slightly different safetybelt under nostop for tty drivers.

Add some missing FreeBSD tags
1999-09-25 18:24:47 +00:00
peter
3b842d34e8 $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
phk
663cbe4fc2 Convert DEVFS hooks in (most) drivers to make_dev().
Diskslice/label code not yet handled.

Vinum, i4b, alpha, pc98 not dealt with (left to respective Maintainers)

Add the correct hook for devfs to kern_conf.c

The net result of this excercise is that a lot less files depends on DEVFS,
and devtoname() gets more sensible output in many cases.

A few drivers had minor additional cleanups performed relating to cdevsw
registration.

A few drivers don't register a cdevsw{} anymore, but only use make_dev().
1999-08-23 20:59:21 +00:00
phk
6a5dc97620 Simplify cdevsw registration.
The cdevsw_add() function now finds the major number(s) in the
struct cdevsw passed to it.  cdevsw_add_generic() is no longer
needed, cdevsw_add() does the same thing.

cdevsw_add() will print an message if the d_maj field looks bogus.

Remove nblkdev and nchrdev variables.  Most places they were used
bogusly.  Instead check a dev_t for validity by seeing if devsw()
or bdevsw() returns NULL.

Move bdevsw() and devsw() functions to kern/kern_conf.c

Bump __FreeBSD_version to 400006

This commit removes:
        72 bogus makedev() calls
        26 bogus SYSINIT functions

if_xe.c bogusly accessed cdevsw[], author/maintainer please fix.

I4b and vinum not changed.  Patches emailed to authors.  LINT
probably broken until they catch up.
1999-05-31 11:29:30 +00:00
phk
7e4a9dced9 This commit should be a extensive NO-OP:
Reformat and initialize correctly all "struct cdevsw".

        Initialize the d_maj and d_bmaj fields.

        The d_reset field was not removed, although it is never used.

I used a program to do most of this, so all the files now use the
same consistent format.  Please keep it that way.

Vinum and i4b not modified, patches emailed to respective authors.
1999-05-30 16:53:49 +00:00
peter
459d4a2cc5 Fix up a few easy 'assignment used as truth value' and 'suggest parens
around && within ||' type warnings.  I'm pretty sure I have not masked
any problems here, I've committed real problem fixes seperately.
1999-05-06 18:44:42 +00:00
peter
73556bfee1 Add sufficient braces to keep egcs happy about potentially ambiguous
if/else nesting.
1999-05-06 18:13:11 +00:00
dt
ba8c622703 s/static foo_devsw_installed = 0;/static int foo_devsw_installed;/.
(Edited automatically)
1999-04-28 10:54:24 +00:00
bde
df88297cad Initialize isa_devtab entries for interrupt handlers in individual
device drivers, not in ioconf.c.  Use a different hack in isa_device.h
so that a new config(8) is not required yet.

pc98 parts approved by: kato
1998-10-22 05:58:45 +00:00
dfr
1d5f38ac22 This commit fixes various 64bit portability problems required for
FreeBSD/alpha.  The most significant item is to change the command
argument to ioctl functions from int to u_long.  This change brings us
inline with various other BSD versions.  Driver writers may like to
use (__FreeBSD_version == 300003) to detect this change.

The prototype FreeBSD/alpha machdep will follow in a couple of days
time.
1998-06-07 17:13:14 +00:00
eivind
71ddd31390 Make all file-system (MFS, FFS, NFS, LFS, DEVFS) related option new-style.
This introduce an xxxFS_BOOT for each of the rootable filesystems.
(Presently not required, but encouraged to allow a smooth move of option *FS
to opt_dontuse.h later.)

LFS is temporarily disabled, and will be re-enabled tomorrow.
1998-01-24 02:54:56 +00:00
yokota
14e5988fe7 - Add support for the following mice to psm/moused/sysmouse:
MS IntelliMouse, Kensington Thinking Mouse, Genius NetScroll,
  Genius NetMouse, Genius NetMouse Pro, ALPS GlidePoint, ASCII
  MieMouse, Logitech MouseMan+, FirstMouse+

- The `psm' driver is made to recognize various models of PS/2 mice
and enable their extra features so that their additional buttons and
wheel/roller are recognized. The name of the detected model will be
printed at boot time.

- A set of new ioctl functions are added to the `psm', `mse' and
`sysmouse' drivers so that the userland program (such as the X server)
can query device information and change driver settings.

- The wheel/roller movement is handled as the `Z' axis movement by the
mouse drivers and the moused daemon. The Z axis movement may be mapped
to another axis movement or buttons.

- The mouse drivers support a new, standard mouse data format,
MOUSE_PROTO_SYSMOUSE format which can encode x, y, and x axis movement
and up to 10 buttons.

/sys/i386/include/mouse.h
- Added some fields to `mousestatus_t' to store Z axis movement
  and flag bits.
- Added the field `model' to `mousehw_t' to store mouse model code.
  Defined model codes.
- Extended `mousemode_t'.
- Added new protocols and some constants for them.
- Added new ioctl functions and structures.
- Removed obsolete ioctl definitions.

/sys/i386/include/console.h
- Added `dz' field to the structure `mouse_data' to pass Z axis movement
  to `syscons/sysmouse'.
- Removed LEFT_BUTTON, MIDDLE_BUTTON and RIGHT_BUTTON.  Use button bits
  defined in `mouse.h' instead.

/sys/i386/isa/psm.c
- Added a set of functions to detect various mice which have additional
  features (wheel and buttons) unavailable in the standard PS/2 mouse.
- Refined existing ioctl functions and added new ones.  Most important
  of all is MOUSE_SETLEVEL which manipulates the output level of the driver.
  While the output level remains zero, the output from the `psm' driver is
  in the standard PS/2 mouse format (three bytes long).  When the level
  is set to one, the `psm' driver will send data in the extended format.
  At the level two the driver uses the format which is native to the
  connected mouse is used. (Meaning that the output from the device is
  passed to the caller as is, unmodified.)  The `psm'  driver will pass
  such extended data format as is to the caller if the output level is
  two, but emulates the standard format if the output level is zero.
- Added kernel configuration flags to set initial resolution
  (PSM_CONFIG_RESOLUTION) and acceleration (PSM_CONFIG_ACCEL).
- Removed the compile options PSM_ACCEL, PSM_CHECKSYNC and PSM_EMULATION.
  Acceleration ratio is now specified by the kernel configuration flags
  stated above.  Sync check logic is refined and now standard.
  The sync check can be turned off by the new kernel configuration flags
  PSM_CONFIG_NOCHECKSYNC (0x100).  PSM_EMULATION has been of little use.
- Summer clean up :-)  Removed unused code and obsolete comments.

/sys/i386/isa/mse.c
- Created mseioctl() to deal with ioctl functions MOUSE_XXXX.
  Most importantly, the MOUSE_SETLEVEL ioctl will change the
  output format from the 5 byte format to the new, extended format
  so that the caller can take advantage of Z axis movement and additional
  buttons.
- Use constants defined in `mouse.h' rather than magic numbers.

/sys/i386/isa/syscons.c
- Changed scioctl() to reflect the new `console.h' and some of the new
  ioctls defined in `mouse.h'.  Most importantly, the MOUSE_SETLEVEL
  ioctl will change the `sysmouse' output format from the MouseSystems
  5 byte format to the new, extended format so that the caller can
  take advantage of Z axis movement and additional buttons.
- Added support for double/triple click actions of the left button and
  single click action of the right button in the virtual console.  The
  left button double click will select a word under the mouse pointer.
  The triple click will select a line and the single click of the right
  button will extend the selected region to the current position of
  the mouse pointer.  This will make the cut/paste support more compatible
  with xterm.

/sys/i386/isa/kbdio.h
- Added PSM_INTELLI_ID.
1997-12-07 08:09:19 +00:00
bde
050f62450b Get select stuff by #including <sys/select.h> instead of <sys/proc.h>. 1997-11-18 11:30:10 +00:00
peter
796eb5ce0a Update select -> poll in drivers. 1997-09-14 03:19:42 +00:00
bde
26179d3e8d Removed unused #includes. 1997-07-20 14:10:18 +00:00
bde
117209856b Don't include <sys/ioctl.h> in the kernel. Stage 1: don't include
it when it is not used.  In most cases, the reasons for including it
went away when the special ioctl headers became self-sufficient.
1997-03-24 11:25:10 +00:00
peter
94b6d72794 Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not
ready for it yet.
1997-02-22 09:48:43 +00:00
jkh
808a36ef65 Make the long-awaited change from $Id$ to $FreeBSD$
This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.

Boy, I'm glad we're not using sup anymore.  This update would have been
insane otherwise.
1997-01-14 07:20:47 +00:00
joerg
91cee61358 Test in mseopen() whether the device has been configured at all, and
refuse the open intent with ENXIO otherwise.

Closes PR # bin/2226.

Reviewed by:	bde
1996-12-19 18:33:13 +00:00
phk
bca885205d Remove devconf, it never grew up to be of any use. 1996-09-06 23:09:20 +00:00
bde
ff26b11d11 Removed recently introduced unnecessary #includes of <machine/cpu.h>
(bootverbose isn't there in -current) and nearby unnecessary #includes.
1996-06-08 09:37:51 +00:00
joerg
919436ccb7 Hide the ``wrong signature'' message behind bootverbose. It's
annoying for people who don't have a bus mouse.
1996-06-02 18:57:17 +00:00
scrappy
415585985c Switched from using devfs_add_sw() to using devfs_add_swf()
Reviewed by:	julian@freebsd.org
1996-03-28 14:29:52 +00:00
bde
78ea2a381b Completed function declarations and/or added prototypes and/or added
#includes to get prototypes.
1995-12-15 00:54:32 +00:00
bde
8620edd2a9 Removed duplicated #includes of <sys/conf.h> 1995-12-15 00:29:31 +00:00
phk
e7008a284e Staticize and cleanup. 1995-12-10 13:40:44 +00:00
phk
a69d1dfbcb Julian forgot to make the *devsw structures static. 1995-12-08 23:23:00 +00:00
julian
1900eea896 Pass 3 of the great devsw changes
most devsw referenced functions are now static, as they are
in the same file as their devsw structure. I've also added DEVFS
support for nearly every device in the system, however
many of the devices have 'incorrect' names under DEVFS
because I couldn't quickly work out the correct naming conventions.
(but devfs won't be coming on line for a month or so anyhow so that doesn't
matter)

If you "OWN" a device which would normally have an entry in /dev
then search for the devfs_add_devsw() entries and munge to make them right..
check out similar devices to see what I might have done in them in you
can't see what's going on..
for a laugh compare conf.c conf.h defore and after... :)
I have not doen DEVFS entries for any DISKSLICE devices yet as that will be
a much more complicated job.. (pass 5 :)

pass 4 will be to make the devsw tables of type (cdevsw * )
rather than (cdevsw)
seems to work here..
complaints to the usual places.. :)
1995-12-08 11:19:42 +00:00
bde
369f41ad46 Removed unnecessary #includes of <sys/user.h>. Some of these were just
to get the definitions of TRUE and FALSE which happen to be defined in
a deeply nested include.

Added nearby #includes of <sys/conf.h> where appropriate.
1995-12-06 23:44:23 +00:00
julian
198d88e0ae If you're going to mechanically replicate something in 50 files
it's best to not have a (compiles cleanly) typo in it! (sigh)
1995-11-29 14:41:20 +00:00
julian
f2f63c6ece OK, that's it..
That's EVERY SINGLE driver that has an entry in conf.c..
my next trick will be to define cdevsw[] and bdevsw[]
as empty arrays and remove all those DAMNED defines as well..

Each of these drivers has a SYSINIT linker set entry
that comes in very early.. and asks teh driver to add it's own
entry to the two devsw[] tables.

some slight reworking of the commits from yesterday (added the SYSINIT
stuff and some usually wrong but token DEVFS entries to all these
devices.

BTW does anyone know where the 'ata' entries in conf.c actually reside?
seems we don't actually have a 'ataopen() etc...

If you want to add a new device in conf.c
please  make sure I know
so I can keep it up to date too..

as before, this is all dependent on #if defined(JREMOD)
(and #ifdef DEVFS in parts)
1995-11-29 10:49:16 +00:00
julian
67727fc1c1 the second set of changes in a move towards getting devices to be
totally dynamic.

this is only the devices in i386/isa
I'll do more tomorrow.
they're completely masked by #ifdef JREMOD at this stage...
the eventual aim is that every driver will do a SYSINIT
at startup BEFORE the probes, which will effectively
link it into the devsw tables etc.

If I'd thought about it more I'd have put that in in this set (damn)
The ioconf lines generated by config will also end up in the
device's own scope as well, so ioconf.c will eventually be gutted
the SYSINIT call to the driver will include a phase where the
driver links it's ioconf line into a chain of such. when this phase is done
then the user can modify them with the boot: -c
config menu if he wants, just like now..
config will put the config lines out in the .h file
(e.g. in aha.h will be the addresses for the aha driver to look.)
as I said this is a very small first step..
the aim of THIS set of edits is to not have to edit conf.c at all when
adding a new device.. the tabe will be a simple skeleton..

when this is done, it will allow other changes to be made,
all teh time still having a fully working kernel tree,
but the logical outcome is the complete REMOVAL of the devsw tables.

By the end of this, linked in drivers will be exactly the same as
run-time loaded drivers, except they JUST HAPPEN to already be linked
and present at startup..
the SYSINIT calls will be the equivalent of the "init" call
made to a newly loaded driver in every respect.

For this edit,
each of the files has the following code inserted into it:

obviously, tailored to suit..
----------------------somewhere at the top:
#ifdef JREMOD
#include <sys/conf.h>
#define CDEV_MAJOR 13
#define BDEV_MAJOR 4
static void 	sd_devsw_install();
#endif /*JREMOD */
---------------------somewhere that's run during bootup: EVENTUALLY a SYSINIT
#ifdef JREMOD
        sd_devsw_install();
#endif /*JREMOD*/
-----------------------at the bottom:
#ifdef JREMOD
struct bdevsw sd_bdevsw =
	{ sdopen,	sdclose,	sdstrategy,	sdioctl,	/*4*/
	  sddump,	sdsize,		0 };

struct cdevsw sd_cdevsw =
	{ sdopen,	sdclose,	rawread,	rawwrite,	/*13*/
	  sdioctl,	nostop,		nullreset,	nodevtotty,/* sd */
	  seltrue,	nommap,		sdstrategy };

static sd_devsw_installed = 0;

static void 	sd_devsw_install()
{
	dev_t descript;
	if( ! sd_devsw_installed ) {
		descript = makedev(CDEV_MAJOR,0);
		cdevsw_add(&descript,&sd_cdevsw,NULL);
#if defined(BDEV_MAJOR)
		descript = makedev(BDEV_MAJOR,0);
		bdevsw_add(&descript,&sd_bdevsw,NULL);
#endif /*BDEV_MAJOR*/
		sd_devsw_installed = 1;
	}
}
#endif /* JREMOD */
1995-11-28 09:42:06 +00:00
bde
6073486300 Added `#include "ioconf.h"' to <machine/conf.h> and cleaned up the
misplaced extern declarations (mostly prototypes of interrupt handlers)
that this exposed.  The prototypes should be moved back to the driver
sources when the functions are staticalized.

Added idempotency guards to <machine/conf.h>.  "ioconf.h" can't be
included when building LKMs so define a wart in bsd.kmod.mk to help
guard against including it.
1995-11-04 17:08:13 +00:00
bde
b25431cbea Fix benign type mismatches in devsw functions. 82 out of 299 devsw
functions were wrong.
1995-09-08 11:09:15 +00:00
bde
81e1e32f6c Don't include <sys/tty.h> in drivers that aren't tty drivers or in general
files that don't depend on the internals of <sys/tty.h>
1995-07-16 10:13:08 +00:00
rgrimes
c86f0c7a71 Remove trailing whitespace. 1995-05-30 08:16:23 +00:00