Unlike GCC, LLVM defines __STDC_VERSION__ to 199901L by default. This
means `restrict' keywords in files end up being given to lint, which
results in errors during compilation of usr.bin/xlint.
Other keywords are also expanded to nothing when using lint, so do the
same with restrict.
done in other places. Until we have no support for command queueing we have
no any benefit from FBS, while enabling it only here somehow leads to
"port not ready" errors on Intel 63XXESB2 controller.
Tested by: Larry Rosenman <ler AT lerctr.org>
pointers together, move padding to the bottom of the structure, and add
two new integer spares due to attrition over time. Remove unused spare
"flags" field, we can use one of the spare ints if we need it later.
This change requires a rebuild of device driver modules that depend on
the layout of ifnet for binary compatibility reasons.
Discussed with: kmacy
which are not in a module of their own like gif.
Single kernel compiles and universe will fail if the size of the struct
changes. Th expected values are given in sys/vimage.h.
See the comments where how to handle this.
Requested by: peter
architecture to implement size-guards on the vimage vnet_* structures.
As CTASSERT_EQUAL() needs special compile time options we back it
by CTASSERT() in the default case. Unfortunately CTASSERT() triggers
first, thus add an option to allow compilation with CTASSERT_EQUAL() only.
See the comments how to get new values if you trigger the assert
and what to do in that case.
Reviewed by: rwatson, zec (earlier versions)
It's better to just use internal language constructs, because it is
likely the compiler has a better opinion on whether to perform inlining,
which is very likely to happen to struct winsize.
Submitted by: Christoph Mallon <christoph mallon gmx de>
It takes a positive integer constant (the expected value) and
another positive integer, usually compile-time evaluated,
e.g. CTASSERT_EQUAL(FOO_EXPECTED_SIZE, sizeof (struct foo));
While the classic CTASSERT() gives:
error: size of array '__assert60' is negative
this gives you:
In function '__ctassert_equal_at_line_60':
warning: '__expected_42_but_got[464ul]' is used uninitialized in this function
and you can directly see the difference in the expected and the
real value.
CTASSERT_EQUAL() needs special compile time options to trigger
thus keep it locally to this header. If it proves to be of general
interest it can be moved to systm.h.
Submitted by: jmallett
Reviewed by: sam, warner, rwatson, jmallett (earlier versions)
* Add RB_FOREACH_FROM() which continues traversal *at*
the y-node provided. There is no pre-increment.
* Nuke RB_FOREACH_SAFE as it was buggy; it would omit the final node.
* Replace RB_FOREACH_SAFE() with a working implementation
derived from RB_FOREACH_FROM().
The key observation is that we now only check the loop-control
variable, but still cache the next member pointer.
* Add RB_FOREACH_REVERSE_FROM() which continues backwards
traversal *at* the y-node provided. There is no pre-increment.
Typically this is used to back out of allocations made
whilst walking an RB-tree.
* Add RB_FOREACH_REVERSE_SAFE() which performs insertion and
deletion safe backwards traversal.
and partially r188903. Revert breaks new drives detection on reinit to the
state as it was before me, but fixes series of new bugs reported by some
people.
Unconditional queueing of ata_completed() calls can lead to deadlock if
due to timeout ata_reinit() was called at the same thread by previous
ata_completed(). Calling of ata_identify() on ata_reinit() in current
implementation opens numerous races and deadlocks.
Problems I was touching here are still exist and should be addresed, but
probably in different way.
When copying big structures, LLVM generates calls to memmove(), because
it may not be able to figure out whether structures overlap. This caused
linker errors to occur. memmove() is now implemented using bcopy().
Ideally it would be the other way around, but that can be solved in the
future. On ARM we don't do add anything, because it already has
memmove().
Discussed on: arch@
Reviewed by: rdivacky
drivers' probe routines. It allows not to sleep and so not drop Giant inside
ata_identify() critical section and so avoid crash if it reentered on
request timeout. Reentering of probe call checked inside of it.
Give device own knowledge about it's type (ata/atapi/atapicam). It is not
a good idea to ask channel status for device type inside ata_getparam().
Add softc memory deallocation on device destruction.
On FreeBSD, this is the default behaviour. According to the spec, we may
give this flag a value of zero, but I'd rather not do this. If we define
it to a non-zero value, we can always change default behaviour without
changing the ABI. This is very unlikely to happen, though.
wcscasecmp(), and wcsncasecmp().
- Make some previously non-standard extensions visible
if POSIX_VISIBLE >= 200809.
- Use restrict qualifiers in stpcpy().
- Declare off_t and size_t in stdio.h.
- Bump __FreeBSD_version in case the new symbols (particularly
getline()) cause issues with ports.
Reviewed by: standards@
at irq install/uninstall time, but when we vt switch, we uninstall the
irq handler. When the irq handler is reinstalled, the modeset ioctl
happens first. The modeset ioctl is supposed to tell us that we can
disable vblank interrupts if there are no active consumers. This will
fail after a vt switch until another modeset ioctl is called via dpms
or xrandr. Leading to cases where either interrupts are on and can't
be disabled, or worse, no interrupts at all.
MFC after: 2 weeks
usb stack rather than with the rest of the processor support code.
Not sure that's a good idea, as we were moving away from it, but this
fixes the build in the mean time so we can have that discussion.
- Fix the copy, we can't do a blind copy but must transfer
the data from the old to the new.
- Fix the ACK processing so we properly stop retransmitting
the thing.
- Fix it so if we get a retran we will properly reply with
the saved response without doing anything.
MFC after: 1 month
the devfs clone handler to open the (invisible) devices on the fly.
The /dev entries are layed out as follows,
/dev/usbctl = master device
/dev/usb/0.1.0.5 = usb device, (<bus>.<dev>.<iface>.<endpoint>)
/dev/ugen0.1 -> usb/0.1.0.0 = ugen link to ctrl endpoint
This also removes the custom permissions model from USB. Bump
__FreeBSD_version to 800066.
Submitted by: rink (earlier version)
net/route.h.
Remove the hidden include of opt_route.h and net/route.h from net/vnet.h.
We need to make sure that both opt_route.h and net/route.h are included
before net/vnet.h because of the way MRT figures out the number of FIBs
from the kernel option. If we do not, we end up with the default number
of 1 when including net/vnet.h and array sizes are wrong.
This does not change the list of files which depend on opt_route.h
but we can identify them now more easily.
printf() and vprintf() are exactly the same, except the way arguments
are passed. Just like we see in other pieces of code (i.e. libc's
printf()), implement printf() using vprintf().
Submitted by: Christoph Mallon <christoph mallon gmx de>
As mentioned by bz and bde, the change I made wasn't the proper way to
fix. Inspired by bde's patch, perform some small cleanups to uprintf().
Reviewed by: bz
Previously, DBCR0 flags were set "globally", but this leads to problems
because Book-E fine grained debug settings work only in conjuction with the
debug master enable bit in MSR: in scenarios when the DBCR0 was set with
intention to debug one process, but another one with MSR[DE] set got
scheduled, the latter would immediately cause debug exceptions to occur upon
execution of its own code instructions (and not the one intended for
debugging).
To avoid such problems and properly handle debugging context, DBCR0 state
should be managed individually per process.
Submitted by: Grzegorz Bernacki gjb ! semihalf dot com
Reviewed by: marcel
The function pow() in libmp(3) clashes with pow(3) in libm. We could
rename this single function, but we can just take the same approach as
the Solaris folks did, which is to prefix all function names with mp_.
libmp(3) isn't really popular nowadays. I suspect not a single
application in ports depends on it. There's still a chance, so I've
increased the SHLIB_MAJOR and __FreeBSD_version.
Reviewed by: deischen, rdivacky
kernel dumping case.
ata_completed() may initiate ata_reinit() on error, that may lead to drives
attach or detach. Attach and detach are sending requests to drives and sleep
waiting for results. But ata_finish() can be called directly from
interrupt handler where sleeping is prohibited, so we must break this chain
somewhere. This place seems to fit best.
go before the standard -I$S to have the search happen before /sys/.
Make this conditional on 'makeoptions WITH_LEGACY=1' in the kernel config.
Prodded by: sam
Disable MSI for nVidia MCP51 controller. Enabling MSI there leads to
unexpected errors and timeouts, that should not happen even if interrupts
are not working completely.
