opt_compat.h is mentioned in nearly 180 files. In-progress network
driver compabibility improvements may add over 100 more so this is
closer to "just about everywhere" than "only some files" per the
guidance in sys/conf/options.
Keep COMPAT_LINUX32 in opt_compat.h as it is confined to a subset of
sys/compat/linux/*.c. A fake _COMPAT_LINUX option ensure opt_compat.h
is created on all architectures.
Move COMPAT_LINUXKPI to opt_dontuse.h as it is only used to control the
set of compiled files.
Reviewed by: kib, cem, jhb, jtl
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14941
assym is only to be included by other .s files, and should never
actually be assembled by itself.
Reviewed by: imp, bdrewery (earlier)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D14180
Remove NO_FUEWORD so the 'e' variants are wrapped by the non-'e'
variants. This is more correct and leaves sparc64 as the outlier.
Reviewed by: jmallett, kib
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14603
correctly for the data contained on each memory page.
There are several components to this change:
* Add a variable to indicate the start of the R/W portion of the
initial memory.
* Stop detecting NX bit support for each AP. Instead, use the value
from the BSP and, if supported, activate the feature on the other
APs just before loading the correct page table. (Functionally, we
already assume that the BSP and all APs had the same support or
lack of support for the NX bit.)
* Set the RW and NX bits correctly for the kernel text, data, and
BSS (subject to some caveats below).
* Ensure DDB can write to memory when necessary (such as to set a
breakpoint).
* Ensure GDB can write to memory when necessary (such as to set a
breakpoint). For this purpose, add new MD functions gdb_begin_write()
and gdb_end_write() which the GDB support code can call before and
after writing to memory.
This change is not comprehensive:
* It doesn't do anything to protect modules.
* It doesn't do anything for kernel memory allocated after the kernel
starts running.
* In order to avoid excessive memory inefficiency, it may let multiple
types of data share a 2M page, and assigns the most permissions
needed for data on that page.
Reviewed by: jhb, kib
Discussed with: emaste
MFC after: 2 weeks
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D14282
We don't support float in the boot loaders, so don't include
interfaces for float or double in systems headers. In addition, take
the unusual step of spiking double and float to prevent any more
accidental seepage.
Make vm_wait() take the vm_object argument which specifies the domain
set to wait for the min condition pass. If there is no object
associated with the wait, use curthread' policy domainset. The
mechanics of the wait in vm_wait() and vm_wait_domain() is supplied by
the new helper vm_wait_doms(), which directly takes the bitmask of the
domains to wait for passing min condition.
Eliminate pagedaemon_wait(). vm_domain_clear() handles the same
operations.
Eliminate VM_WAIT and VM_WAITPFAULT macros, the direct functions calls
are enough.
Eliminate several control state variables from vm_domain, unneeded
after the vm_wait() conversion.
Scetched and reviewed by: jeff
Tested by: pho
Sponsored by: The FreeBSD Foundation, Mellanox Technologies
Differential revision: https://reviews.freebsd.org/D14384
significant source of cache line contention from vm_page_alloc(). Use
accessors and vm_page_unwire_noq() so that the mechanism can be easily
changed in the future.
Reviewed by: markj
Discussed with: kib, glebius
Tested by: pho (earlier version)
Sponsored by: Netflix, Dell/EMC Isilon
Differential Revision: https://reviews.freebsd.org/D14273
We don't support older compilers. Most of the code in these files is
for pre-3.0 gcc, which is at least 15 years obsolete. Move to using
phk's sys/_stdargs.h for all these platforms.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D14323
The _Alignas specifier must come before the declaration and not after. It
works if _Alignas() expands to __attribute__(aligned(x)) which was the only
case I tested before.
Approved By: jhb (mentor)
global to per-domain state. Protect reservations with the free lock
from the domain that they belong to. Refactor to make vm domains more
of a first class object.
Reviewed by: markj, kib, gallatin
Tested by: pho
Sponsored by: Netflix, Dell/EMC Isilon
Differential Revision: https://reviews.freebsd.org/D14000
The compiler/linker can align fake_preload anyway it would like. When
building the kernel with gcc+bfd this always happened to be a multiple of 8.
When I built the kernel with clang and linked with lld fake_preload
happened to only be aligned to 4 bytes which caused a an ADDRS trap because
the compiler will emit sd instructions to store to this buffer.
Reviewed By: jhb, imp
Approved By: jhb (mentor)
Differential Revision: https://reviews.freebsd.org/D14018
The old way required the data to be present really early and copied it from
memory mapped NOR flash; this only worked during kernel boot but not for
ath/ath_hal modules.
Tested:
* AR9331, Carambola2, ath/hal modules.
- Add a new <machine/abi.h> header to hold constants shared between C
and assembly such as CALLFRAME_SZ.
- Add a new STACK_ALIGN constant to <machine/abi.h> and use it to
replace hardcoded constants in the kernel and makecontext(). As a
result of this, ensure the stack pointer on N32 and N64 is 16-byte
aligned for N32 and N64 after exec(), after pthread_create(), and
when sending signals rather than 8-byte aligned.
Reviewed by: jmallett
Sponsored by: DARPA / AFRL
Differential Revision: https://reviews.freebsd.org/D13875
Uses of mallocarray(9).
The use of mallocarray(9) has rocketed the required swap to build FreeBSD.
This is likely caused by the allocation size attributes which put extra pressure
on the compiler.
Given that most of these checks are superfluous we have to choose better
where to use mallocarray(9). We still have more uses of mallocarray(9) but
hopefully this is enough to bring swap usage to a reasonable level.
Reported by: wosch
PR: 225197
kernel by PHYS_TO_DMAP() as previously present on amd64, arm64, riscv, and
powerpc64. This introduces a new MI macro (PMAP_HAS_DMAP) that can be
evaluated at runtime to determine if the architecture has a direct map;
if it does not (or does) unconditionally and PMAP_HAS_DMAP is either 0 or
1, the compiler can remove the conditional logic.
As part of this, implement PHYS_TO_DMAP() on sparc64 and mips64, which had
similar things but spelled differently. 32-bit MIPS has a partial direct-map
that maps poorly to this concept and is unchanged.
Reviewed by: kib
Suggestions from: marius, alc, kib
Runtime tested on: amd64, powerpc64, powerpc, mips64
Focus on code where we are doing multiplications within malloc(9). None of
these ire likely to overflow, however the change is still useful as some
static checkers can benefit from the allocation attributes we use for
mallocarray.
This initial sweep only covers malloc(9) calls with M_NOWAIT. No good
reason but I started doing the changes before r327796 and at that time it
was convenient to make sure the sorrounding code could handle NULL values.
X-Differential revision: https://reviews.freebsd.org/D13837
allocated with a tag to come from the specified domain if it meets the
other constraints provided by the tag. Automatically create a tag at
the root of each bus specifying the domain local to that bus if
available.
Reviewed by: jhb, kib
Tested by: pho
Sponsored by: Netflix, Dell/EMC Isilon
Differential Revision: https://reviews.freebsd.org/D13545
domains can be done by the _domain() API variants. UMA also supports a
first-touch policy via the NUMA zone flag.
The slab layer is now segregated by VM domains and is precise. It handles
iteration for round-robin directly. The per-cpu cache layer remains
a mix of domains according to where memory is allocated and freed. Well
behaved clients can achieve perfect locality with no performance penalty.
The direct domain allocation functions have to visit the slab layer and
so require per-zone locks which come at some expense.
Reviewed by: Attilio (a slightly older version)
Tested by: pho
Sponsored by: Netflix, Dell/EMC Isilon
This permits N32 hard-float binaries to use 64-bit floating point
registers (which is what N32 binaries expect) matching the N64 ABI.
Reviewed by: imp, jmallett
Sponsored by: DARPA / AFRL
Differential Revision: https://reviews.freebsd.org/D13830
is now unobtanium. It's only had API changes in the last 7 years, and
is responsible for a very large number of them. In addition, there's a
lot of code that reimplements base FreeBSD functionality, diminishing
the chances it still works. Without hardware to teset it on, or
prospects of obtaining such hardware and without vendor support, it's
time to move on.
Suggested by: kan@ in mips@ retirement discussion
it's at least 5 years out of production. I couldn't find a used one on
ebay and other secondary markets just now, nor when I tried 4 years
ago. It dates from the initial project/mips2 merge 8 years ago, and
hasn't been updated since.
Discussed on: mips@ (with some dissent)
It came into the tree with the project/mips merge 8 years ago. At the
time, it was hard to find a board with enough RAM to run. Now FreeBSD
requires at least 2x the RAM it did then. No changes have happened to
this port apart from API churn and license tagging since then. It ran
OK at the time it was committed, but no sightings in the wild have
happened since shortly after it was committed.
https://www.linux-mips.org/wiki/Adm5120_devices lists a bunch of
boards that were available 5 years ago (but are no longer
available). The beefiest one had only 64MB of RAM which is too
small. The Mirktik RB1xx never had more than 32MB.
Also remove confusing QEMU config file that never ever worked in QEMU
for mips. MALTA is used for that. Another of my past mistakes, false
starts that never amounted to anything.
Discussed on: mips@ (with some dissent)
never got better. It never worked on real hardware and is still mostly
stubs after 8 years when I added it. It has had no real update in that
time apart from API churn. It was added just so it didn't get lost in
the project/mips merge, but maybe it should have been lost as nothing
has come of it. It is time to give up the ghost on this one.
Approved by: me, shooting my own dog
Discussed on: mips@
This compilation issue has been found thanks to freebsd-wifi-build:
- gpioiic requires "gpio_if.h", so "device gpio" is mandatory
- rtl8366rb works over MDIO interface, so "device mdio" is mandatory
Compilation is checked on FreeBSD 12-CURRENT machine.
The only users of the functions were db_read_bytes() and
db_write_bytes() ddb(4) interfaces. Replace the calls with direct
reads and writes, which are automatically atomic on 64bits and n32.
Note that removed assembler implementation for mips32 is not atomic
anyway.
Reviewed by: jhb
Discussed with: imp
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D13586
and atomic_store_64.
The MD definitions are provided for LP64 only, while mips also uses
them for 32bit and n32. Only define mips variants for 32bit and n32
and change the syntax to match common definitions.
Note that this commit does not fix 32bit asm implementation to follow
new KBI, this will be fixed later. The functions are only used for 8
byte ddb accesses so the known bug does not prevent normal kernel
operations.
Sponsored by: The FreeBSD Foundation
They provide relaxed-ordered atomic access semantic. Due to the
FreeBSD memory model, the operations are syntaxical wrappers around
the volatile accesses. The volatile qualifier is used to ensure that
the access not optimized out and in turn depends on the volatile
semantic as implemented by supported compilers.
The motivation for adding the operation is to help people coming from
other systems or knowing the C11/C++ standards where atomics have
special type and require use of the special access operations. It is
still the case that FreeBSD requires plain load and stores of aligned
integer types to be atomic.
Suggested by: jhb
Reviewed by: alc, jhb
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D13534
the expected default board_vendor value on MIPS SoCs.
This is required by bwn(4) to differentiate between single-band and
dual-band device variants that otherwise share a common chip ID.
Approved by: adrian (mentor, implicit)
Sponsored by: The FreeBSD Foundation
This variable should be pure MI except possibly for reading it in MD
dump routines. Its initialization was pure MD in 4.4BSD, but FreeBSD
changed this in r36441 in 1998. There were many imperfections in
r36441. This commit fixes only a small one, to simplify fixing the
others 1 arch at a time. (r47678 added support for
special/early/multiple message buffer initialization which I want in
a more general form, but this was too fragile to use because hacking
on the msgbufp global corrupted it, and was only used for 5 hours in
-current...)
