- pthreads(3) should actually be pthread(3).
- getentropy(2) should actually be getentropy(3).
This makes the manpage `make manlint` clean.
MFC after: 1 week
Sponsored by: DellEMC Isilon
These values are taken directly from the density report from an
IBM LTO-9 tape drive. (Using mt getdensity)
A LTO-9 drive stores 18TB raw (45TB with compression) on an LTO-9 tape.
lib/libmt/mtlib.c:
Add the LTO-9 density code, and bpmm/bpi values.
usr.bin/mt/mt.1:
Add the LTO-9 density code, bpmm/bpi values and number of
tracks. Bump the man page date.
MFC after: 3 days
Sponsored by: Spectra Logic
Assume that UMTX_OP with a double underbar following is a flag, while any
underbar+alphanumeric combination immeiately following is an op.
This was a part of D27325.
Reviewed by: kib
This is being done for the formatting and context changes. While the net content
hasn't been changed, the content/context changes were sufficient to warrant the
date bump.
MFC after: 1 week
MFC with: r368431, r368433, r368434, r368435
Sponsored by: DellEMC Isilon
While some of the syscalls' behavior were documented and implied in the
RETURN VALUES section by earlier, e.g., the DESCRIPTION sections, as having
behavior of the other calls (`*_fd` vs `*_file` vs `*_link`), there was a lot
of implied return value behavior in the section prior to this change.
Explicitly document the syscall behavior per the current implementation in
sys/kern/vfs_extattr.c so others can better develop based on its explicit
documented behavior instead of having to digest the context of the manpage to
understand the appropriate behavior.
MFC after: 1 week
MFC with: r368431, r368433, r368434
Sponsored by: DellEMC Isilon
- Remove an unnecessary trailing comma separating a two-item clause.
- Sort more function calls alphabetically (in the same vein as r368433).
MFC after: 1 week
Sponsored by: DellEMC Isilon
Although some sections of the manpage sort the syscalls alphabetically, many
core areas of the manpage do not. Sort the syscalls so it is easier to pick out
functional changes and to improve manpage readability.
This formatting change is also being done to make future functional changes
easier to spot.
MFC after: 1 week
Sponsored by: DellEMC Isilon
The date with .Dd prior to this change isn't canonically spelled out: it
should have been "December", not "Dec".
MFC after: 1 week
Sponsored by: DellEMC Isilon
- The CAVEATS section was misspelled as "CAVEAT".
- The CAVEATS section should come before the "BUGS" section and after
other existing sections by convention.
MFC after: 1 week
Reported by: make manlint
Sponsored by: DellEMC Isilon
It was realized just a little too late that this was a hack that belonged in
individual regex(3)-using applications. It was surrounded in NOTYET and not
implemented in the engine, so remove it.
This is the last of the needed GNU expressions before we can unleash bsdgrep
by default. \b is effectively an agnostic equivalent of \< and \>, while
\B will match every space that isn't making a transition from
nonchar -> char or char -> nonchar.
These are GNU extensions, generally equivalent to ^ and $ except that the
new syntax will not match beginning of line after the first in a multi-line
expression or the end of line before absolute last in a multi-line
expression.
Follow-up to r353959 and r368070: do the same for other architectures.
arm32 already seems to use its own .fnstart/.fnend directives, which
appear to be ARM-specific variants of the same thing. Likewise, MIPS
uses .frame directives.
Reviewed by: arichardson
Differential Revision: https://reviews.freebsd.org/D27387
As of r365978, minidumps include a copy of dump_avail[]. This is an
array of vm_paddr_t ranges. libkvm walks the array assuming that
sizeof(vm_paddr_t) is equal to the platform "word size", but that's not
correct on some platforms. For instance, i386 uses a 64-bit vm_paddr_t.
Fix the problem by always dumping 64-bit addresses. On platforms where
vm_paddr_t is 32 bits wide, namely arm and mips (sometimes), translate
dump_avail[] to an array of uint64_t ranges. With this change, libkvm
no longer needs to maintain a notion of the target word size, so get rid
of it.
This is a no-op on platforms where sizeof(vm_paddr_t) == 8.
Reviewed by: alc, kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27082
Update libarchive to 3.5.0
Relevant vendor changes:
Issue #1258: add archive_read_support_filter_by_code()
PR #1347: mtree digest reader support
Issue #1381: skip hardlinks pointing to itself on extraction
PR #1387: fix writing of cpio archives with hardlinks without file type
PR #1388: fix rdev field in cpio format for device nodes
PR #1389: completed support for UTF-8 encoding conversion
PR #1405: more formats in archive_read_support_format_by_code()
PR #1408: fix uninitialized size in rar5_read_data
PR #1409: system extended attribute support
PR #1435: support for decompression of symbolic links in zipx archives
Issue #1456: memory leak after unsuccessful archive_write_open_filename
MFC after: 1 week
We need at least thr_malloc ready. The situation is possible e.g. in case
of libthr being listed in DT_NEEDED before some of its consumers.
Reported and tested by: lev
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
This seems to be required by recent clang asan.
I do not see other way than put the symbol under FBSD_1.0 version.
PR: 251112
Reported by: Andrew Stitcher <astitcher@apache.org>
Reviewed by: emaste
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D27389
r352913 added decoding of mmap PROT_MAX()'d flags but didn’t account for the
case where different values were specified for PROT_MAX and regular flags.
Fix it.
Submitted by: sigsys_gmail.com
Reported by: sigsys_gmail.com
MFC after: 7 days
Differential Revision: https://reviews.freebsd.org/D27312
Crypto file descriptors were added in the original OCF import as a way
to provide per-open data (specifically the list of symmetric
sessions). However, this gives a bit of a confusing API where one has
to open /dev/crypto and then invoke an ioctl to obtain a second file
descriptor. This also does not match the API used with /dev/crypto on
other BSDs or with Linux's /dev/crypto driver.
Character devices have gained support for per-open data via cdevpriv
since OCF was imported, so use cdevpriv to simplify the userland API
by permitting ioctls directly on /dev/crypto descriptors.
To provide backwards compatibility, CRIOGET now opens another
/dev/crypto descriptor via kern_openat() rather than dup'ing the
existing file descriptor. This preserves prior semantics in case
CRIOGET is invoked multiple times on a single file descriptor.
Reviewed by: markj
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D27302
Add a new ioctl to disable all MSI-X interrupts for a PCI passthrough
device and invoke it if a write to the MSI-X capability registers
disables MSI-X. This avoids leaving MSI-X interrupts enabled on the
host if a guest device driver has disabled them (e.g. as part of
detaching a guest device driver).
This was found by Chelsio QA when testing that a Linux guest could
switch from MSI-X to MSI interrupts when using the cxgb4vf driver.
While here, explicitly fail requests to enable MSI on a passthrough
device if MSI-X is enabled and vice versa.
Reported by: Sony Arpita Das @ Chelsio
Reviewed by: grehan, markj
MFC after: 2 weeks
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D27212
unsigned char promotes to int, which can overflow when shifted left by
24 bits or more. this has been reported multiple times but then
forgotten. it's expected to be benign UB, but can trap when built with
explicit overflow catching (ubsan or similar). fix it now.
note that promotion to uint32_t is safe and portable even outside of
the assumptions usually made in musl, since either uint32_t has rank
at least unsigned int, so that no further default promotions happen,
or int is wide enough that the shift can't overflow. this is a
desirable property to have in case someone wants to reuse the code
elsewhere.
musl commit: 593caa456309714402ca4cb77c3770f4c24da9da
Obtained from: musl
first, the condition (mem && k < p) is redundant, because mem being
nonzero implies the needle is periodic with period exactly p, in which
case any byte that appears in the needle must appear in the last p
bytes of the needle, bounding the shift (k) by p.
second, the whole point of replacing the shift k by mem (=l-p) is to
prevent shifting by less than mem when discarding the memory on shift,
in which case linear time could not be guaranteed. but as written, the
check also replaced shifts greater than mem by mem, reducing the
benefit of the shift. there is no possible benefit to this reduction of
the shift; since mem is being cleared, the full shift is valid and
more optimal. so only replace the shift by mem when it would be less
than mem.
musl commits:
8f5a820d147da36bcdbddd201b35d293699dacd8
122d67f846cb0be2c9e1c3880db9eb9545bbe38c
Obtained from: musl
MFC after: 2 weeks
We have adopted these and don't consider them 'contrib' code, so bring
them closer to style(9). This is a followon to r315467 and r351700.
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
This function returns the path to the local software base directory, by
default "/usr/local" (or the value of _PATH_LOCALBASE in include/paths.h
when building the world).
The value returned can be overridden by 2 methods:
- the LOCALBASE environment variable (ignored by SUID programs)
- else a non-default user.localbase sysctl value
Reviewed by: hps (earlier version)
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D27236
Some platforms have additional architecture-specific floating-point flags.
Msun test cases lrint and test_fegsetenv (fenv) expects only standard flags,
so make sure to mask them appropriately.
This makes test pass on PowerPC64.
Reviewed by: jhibbits, ngie
Sponsored by: Eldorado Research Institute (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D27202
No functional change intended.
Tracking these structures separately for each proc enables future work to
correctly emulate clone(2) in linux(4).
__FreeBSD_version is bumped (to 1300130) for consumption by, e.g., lsof.
Reviewed by: kib
Discussed with: markj, mjg
Differential Revision: https://reviews.freebsd.org/D27037
Fix incorrect mask being used when FE_INVALID bit is wanted by user.
The problem was noticed thanks to msun fenv tests.
Reviewed by: jhibbits, luporl
Sponsored by: Eldorado Research Institute (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D27201
Specifically, if we're waking up some value n > BATCH_SIZE, then the
copyin(9) is wrong on the second iteration due to upp being the wrong type.
upp is currently a uint32_t**, so upp + pos advances it by twice as many
elements as it should (host pointer size vs. compat32 pointer size).
Fix it by just making upp a uint32_t*; it's still technically a double
pointer, but the distinction doesn't matter all that much here since we're
just doing arithmetic on it.
Add a test case that demonstrates the problem, placed with the libthr tests
since one messing with _umtx_op should be running these tests. Running under
compat32, the new test case will hang as threads after the first 128 get
missed in the wake. it's not immediately clear how to hit it in practice,
since pthread_cond_broadcast() uses a smaller (sleepq batch?) size observed
to be around ~50 -- I did not spend much time digging into it.
The uintptr_t change makes no functional difference, but i've tossed it in
since it's more accurate (semantically).
Reported by: Andrew Gierth (andrew_tao173.riddles.org.uk, inspection)
Reviewed by: kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D27231
This clever technique to get a time remaining back was added to support sem_clockwait_np.
Reviewed by: kib, vangyzen
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D27160
unify the retrieval of the various ways that the local software base directory,
typically "/usr/local", is expressed in the system.
Reviewed by: se
Differential Revision: https://reviews.freebsd.org/D27022
This was missed in r364221 so tests were not built.
Reviewed by: bdrewery
Obtained from: CheriBSD
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D27210
libarchive depends on it by default and tar uses libarchive.
So on a update :
1/ runtime contain tar
2/ runtime have libarchive in shlibs_required
3/ libarchive packages depends on utilities
4/ utilities depends on runtime
5/ kaboom
All users of libprivatezstd (libarchive related stuff and objcopy/ar)
are already in utilities.
Discussed with: bapt
- Force dynamic to be a non-PIE binary.
- Add a dynamicpie test which uses a PIE binary.
Reviewed by: andrew
Obtained from: CheriBSD
MFC after: 2 weeks
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D27127
PIE executables use crtbeginS.o and have a non-NULL dso_handle as a
result.
Reviewed by: andrew, emaste
MFC after: 2 weeks
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D27126
This is more consistent with the names used for .ctor and .dtor
symbols and better reflects __JCR_END__'s role.
Reviewed by: andrew
Obtained from: CheriBSD
MFC after: 2 weeks
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D27125
Provide a way to ask for an opaque version string for a locale_t, so
that potential changes in sort order can be detected. Similar to
ICU's ucol_getVersion() and Windows' GetNLSVersionEx(), this API is
intended to allow databases to detect when text order-based indexes
might need to be rebuilt.
The CLDR version is extracted from CLDR source data by the Makefile
under tools/tools/locale, written into the machine-generated Makefile
under shared/colldef, passed to localedef -V, and then written into
LC_COLLATE file headers. The initial version is 34.0.
tools/tools/locale was recently updated to pull down 35.0, but the
output hasn't been committed under share/colldef yet, so that will
provide the first observable change when it happens. Other versioning
schemes are possible in future, because the format is unspecified.
Reviewed by: bapt, 0mp, kib, yuripv (albeit a long time ago)
Differential Revision: https://reviews.freebsd.org/D17166
According to code comments the original motivation was to allow for
malloc_type_internal changes without ABI breakage. This can be trivially
accomplished by providing spare fields and versioning the struct, as
implemented in the patch below.
The upshots are one less memory indirection on each alloc and disappearance
of mt_zone.
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D27104
PowerPC kernel is of DYN type and it has a base address where it is
initially loaded, before being relocated. As the start address passed to
pmcstat_image_link() is where the kernel was relocated to, but the symbols
always use the original base address, we need to subtract it to get the
correct offset.
Reviewed by: jhibbits
Sponsored by: Eldorado Research Institute (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D26114
This change adds support for POWER8/9 performance counters.
Reviewed by: jhibbits
Sponsored by: Eldorado Research Institute (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D26113
Use uintptr_t to cast a uint64_t to a pointer type.
Yeah, it isn't technically correct for platforms with pointers
> 64 bits, but it's fine here.
This fixes 32 bit compat library builds on amd64 and also
mips32 builds.
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D26790
This sysctl value had been provided as a read-only variable that is
compiled into the C library based on the value of _PATH_LOCALBASE in
paths.h.
After this change, the value is compiled into the kernel as an empty
string, which is translated to _PATH_LOCALBASE by the C library.
This empty string can be overridden at boot time or by a privileged
user at run time and will then be returned by sysctl.
When set to an empty string, the value returned by sysctl reverts to
_PATH_LOCALBASE.
This update does not change the behavior on any system that does
not modify the default value of user.localbase.
I consider this change as experimental and would prefer if the run-time
write permission was reconsidered and the sysctl variable defined with
CLFLAG_RDTUN instead to restrict it to be set at boot time.
MFC after: 1 month
The value is provided by the C library as for other sysctl variables in
the user tree. It is compiled in and returns the value of _PATH_LOCALBASE
defined in paths.h.
Reviewed by: imp, scottl
Differential Revision: https://reviews.freebsd.org/D27009
more readable. While here, add linux_check_errtbl() function to make
sure we don't leave holes.
No objections: emaste (earlier version)
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26972
r366981 disabled ASAN when it might not be reliable (with an external
compiler), but this test is broken without ASAN so disable it completely
in that case.
PR: 250706
Reviewed by: emaste, lwhsu
Differential Revision: https://reviews.freebsd.org/D26982
Foundation copyrights, approved by emaste@. It does not include
files which carry other people's copyrights; if you're one
of those people, feel free to make similar change.
Reviewed by: emaste, imp, gbe (manpages)
Differential Revision: https://reviews.freebsd.org/D26980
Clang's optimizer spends a really long time on these tests at -O2, so we now
use -O0 instead. This reduces the -j32 time for lib/googletest/test from 131s
to 29s. Using -O0 also reduces the disk usage from 144MB (at -O2) / 92MB (at
-O1) to 82MB.
Reviewed By: ngie, dim
Differential Revision: https://reviews.freebsd.org/D26751
Literal references to /usr/local exist in a large number of files in
the FreeBSD base system. Many are in contributed software, in configuration
files, or in the documentation, but 19 uses have been identified in C
source files or headers outside the contrib and sys/contrib directories.
This commit makes it possible to set _PATH_LOCALBASE in paths.h to use
a different prefix for locally installed software.
In order to avoid changes to openssh source files, LOCALBASE is passed to
the build via Makefiles under src/secure. While _PATH_LOCALBASE could have
been used here, there is precedent in the construction of the path used to
a xauth program which depends on the LOCALBASE value passed on the compiler
command line to select a non-default directory.
This could be changed in a later commit to make the openssh build
consistently use _PATH_LOCALBASE. It is considered out-of-scope for this
commit.
Reviewed by: imp
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D26942
The intel compiler support has badly decayed over the years. Stop
pretending that we support it. Note, I've stopped short of requiring
gcc builtin support with this commit since other compilers may be used
to build non-base software and we need to support those so more
investigation is needed before simplifying further.
libjail is pretty small, so it makes for a good proof of concept demonstrating
how a system library can be wrapped to create a loadable Lua module for flua.
* Introduce 3lua section for man pages
* Add libjail module
Reviewed by: kevans, manpages
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D26080
I noticed after the review that these shouldn't be static. Remove the
'static' from them, otherwise concurrent calls to warn* might see a
similar but to the original.
When warn() family of functions is being used after err_set_file() has
been set to, for example, /dev/null, errno is being clobbered,
rendering it unreliable after, for example, procstat_getpathname()
when it is supposed to emit a warning. Then the errno is changed to
Inappropriate ioctl for device, destroying the original value (via
calls to fprintf()functions).
Submitted by: Juraj Lutter
Differential Revision: https://reviews.freebsd.org/D26871
When building FreeBSD 11 on a FreeBSD 12 system with
CROSS_TOOLCHAIN=llvm10 we end up trying to link against the packaged
version of the sanitizer library. This resulted in a requirement for
getentropy(3) which is not present in FreeBSD 11.
Reviewed by: emaste
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D26903
GNU and Oracle libelf implementations added support for section
compression, intended to reduce the size of DWARF debug info (which
might be an order of magnitude larger than the code).
There are two compressed ELF section formats:
1. Old GNU - sections are renmaed to start with 'z'. Section contains
a magic number, uncompressed size, and compressed data.
2. Oracle and New GNU - compressed sections use the SHF_COMPRESSED flag.
The compression header contains the compression type, uncompressed
size, and uncompressed alignment.
The second style is preferred and this change implements only that one.
Submitted by: Tiger Gao <tig@FreeBSDFoundation.org>
Reviewed by: markj
MFC after: 2 weeks
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D24566
Move list_cloners() from ifconfig(8) to libifconfig(3) where it can be
reused by other consumers.
Reviewed by: kp
Differential Revision: https://reviews.freebsd.org/D26858
- Hide ptsname_r under __BSD_VISIBLE for now as the specification
is not finalized at this time.
- Keep Symbol.map sorted.
- Avoid the interposing of ptsname_r(3) from an user application
from breaking ptsname(3) by making the implementation a static
method and call the static function from ptsname(3) instead.
Reported by: kib
Reviewed by: kib, jilles
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D26845
This saves a few seconds in a parallel build since we can build the
gtest_main and gmock subdirectories in parallel.
Reviewed By: ngie
Differential Revision: https://reviews.freebsd.org/D26760
Currently the googletest internal tests build after the matching library.
However, each of these is serialized at the top level makefile.
Additionally some of the tests (e.g. the gmock-matches-test) take up to
90 seconds to build with clang -O2. Having to wait for this test to
complete before continuing to the next directory seriously slows down the
parllelism of a -j32 build.
Before this change running `make -C lib/googletest -j32 -s` in buildenv
took 202 seconds, now it's 153 due to improved parallelism.
Reviewed By: emaste (no objection)
Differential Revision: https://reviews.freebsd.org/D26748
While toying around with lua bindings for libbe(3), I discovered that I
apparently never documented this, despite having documented
be_is_auto_snapshot_name that references it.
MFC after: 1 week
libbe will never need to mutate these as we either process them into a local
buffer or we just don't touch them and write to a separate out argument.
MFC after: 1 week
When compiling without casper these API calls result in unused variable warnings.
Using #defines was lovely in the past but unfortunately it triggers warnings
which can cascade into errors.
Instead, just inline with some fallthrough functions and keep things happy.
Tested:
* gcc-6 targeting mips32, with casper disabled
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D26762
Use designated initializers to document positions in the arrays rather
than requiring counting. Use nitems() rather than rolling it by hand to
count elements.
Also, passify a Clang 12 warning about suspcious string concatenation
within an array initializer by adding parentheses.
Reviewed by: emaste
MFC after: 1 week
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D26592
I noticed that this part of the build was taking much longer than
expected. Turns out it's due to not running the subdirs in parallel.
Reduces `make all` inside lib/libclang_rt time from 63s to 20s with -j32.
Reviewed By: dim
Differential Revision: https://reviews.freebsd.org/D26623
We have to bootstrap arc4random.c, so guard the FenestrasX code to avoid
using it on Linux/macOS.
Reviewed By: cem
Differential Revision: https://reviews.freebsd.org/D26738
Push the root seed version to userspace through the VDSO page, if
the RANDOM_FENESTRASX algorithm is enabled. Otherwise, there is no
functional change. The mechanism can be disabled with
debug.fxrng_vdso_enable=0.
arc4random(3) obtains a pointer to the root seed version published by
the kernel in the shared page at allocation time. Like arc4random(9),
it maintains its own per-process copy of the seed version corresponding
to the root seed version at the time it last rekeyed. On read requests,
the process seed version is compared with the version published in the
shared page; if they do not match, arc4random(3) reseeds from the
kernel before providing generated output.
This change does not implement the FenestrasX concept of PCPU userspace
generators seeded from a per-process base generator. That change is
left for future discussion/work.
Reviewed by: kib (previous version)
Approved by: csprng (me -- only touching FXRNG here)
Differential Revision: https://reviews.freebsd.org/D22839
Sort a few VHT160 and 80+80 lines, update some comments, and remove
a superfluous ','.
No functional changes intended.
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
VirtFS allows sharing an arbitrary directory tree between bhyve virtual
machine and the host. Current implementation has a fairly complete support
for 9P2000.L protocol, except for the extended attribute support. It has
been verified to work with the qemu-kvm hypervisor.
Reviewed by: rgrimes, emaste, jhb, trasz
Approved by: trasz (mentor)
MFC after: 1 month
Relnotes: yes
Sponsored by: Conclusive Engineering (development), vStack.com (funding)
Differential Revision: https://reviews.freebsd.org/D10335
newlocale() optionally takes a "base" locale, from which components not
specified in the mask are inherited. POSIX says that newlocale() may
modify "base" and return it, or free "base" and return a newly allocated
locale. We were not doing either, so applications which use newlocale()
to modify an existing base locale end up leaking memory on FreeBSD.
This diff fixes the leak by releasing a reference to the base locale
before returning. This is less efficient than modifying "base"
directly, but is simpler for an initial bug fix. Also, update the man
page to clarify behaviour with respect to "base".
PR: 249416
MFC after: 3 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26522
r366344 fixed and reenabled the assembly optimized skein implementation,
but skein_block objects were not being rebuilt in no-clean builds. This
resulted in failing no-clean builds. SKEIN_USE_ASM controls which
routines come from C vs assembly, and with no explicit dependency
r366344's change to SKEIN_USE_ASM did not cause skein_block.{o,pico}
to be rebuilt.
Add a dependency on this Makefile for the skein_block objects. This
dependency is broader in scope than absolutely required (that is, the
skein_block objects will now be rebuilt on any change to this Makefile).
There are ways this could be addressed, but it is probably not worth the
additional effort or testing time to pursue them.
PR: 248221
Reported by: kevans, Jeremy Faulkner
Discussed with: kevans
Sponsored by: The FreeBSD Foundation
The assembly implementation incorrectly used logical AND instead of
bitwise AND. Fix, and re-enable in libmd.
Submitted by: Yang Zhong <yzhong@freebsdfoundation.org>
Reviewed by: cem (earlier)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26614
The warning generated pre-r366207 is actually a sign comparison warning:
error: comparison of integers of different signs: 'unsigned long' and 'int'
if (strlcpy(buf, execpath, buflen) >= buflen)
Revert parts that affected other lines and just cast this to unsigned int.
The buflen < 0 -> EINVAL has been kept despite no longer serving any
purposes w.r.t. sign-extension because I do believe it's the right thing to
do: "The provided buffer was not the right size for the requested item."
The original warning is confirmed to still be gone with an:
env WARNS=6 make WITHOUT_TESTS=yes.
Reviewed by: asomers, kib
X-MFC-With: r366207
Differential Revision: https://reviews.freebsd.org/D26631
