with 11.0+, where the debugging symbols use a new naming scheme for release
distribution files.
Errata candidate.
Approved by: cperciva
Differential Revision: https://reviews.freebsd.org/D7170
The code was successfully tested with FreeBSD, Linux, Solaris and Windows
guests. This interface is predictably slower (about 2x) then virtio-net,
but it is very helpful for guests not supporting virtio-net by default.
Thanks to Jeremiah Lott and Peter Grehan for doing original heavy lifting.
It was useless before, but may improve performance now if multiple devices
are configured and guest supports this feature.
Sponsored by: iXsystems, Inc.
While old syntax is still supported, new syntax looks like this:
-s 3,ahci,hd:/dev/zvol/XXX,hd:/dev/zvol/YYY,cd:/storage/ZZZ.iso
Sponsored by: iXsystems, Inc.
any open vnodes before proceeding. Make autounmound(8) use this flag.
Without it, even an unsuccessfull unmount causes filesystem flush,
which interferes with normal operation.
Reviewed by: kib@
Approved by: re (gjb@)
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D7047
Add `WRAPPED_CTASSERT` macro by annotating CTASSERTs with __unused
to deal with -Wunused-local-typedefs warnings from gcc 4.8+.
All other compilers (clang, etc) use CTASSERT as-is. A more generic
solution for this issue will be proposed after ^/stable/11 is forked.
Consolidate all CTASSERTs under one block instead of inlining them in
functions.
Approved by: re (gjb)
Differential Revision: https://reviews.freebsd.org/D7119
MFC after: 1 week
Reported by: Jenkins
Reviewed by: grehan (maintainer)
Sponsored by: EMC / Isilon Storage Division
Put cfl/prdt under AHCI_DEBUG #defines as they are only used in
those cases.
Approved by: re (gjb)
Differential Revision: https://reviews.freebsd.org/D7119
MFC after: 1 week
Reported by: Jenkins
Reviewed by: grehan (maintainer)
Sponsored by: EMC / Isilon Storage Division
this on the branch.
Original commit message:
Initial bhyve native graphics support.
This adds emulations for a raw framebuffer device, PS2 keyboard/mouse,
XHCI USB controller and a USB tablet.
A simple VNC server is provided for keyboard/mouse input, and graphics
output.
A VGA emulation is included, but is currently disconnected until an
additional bhyve change to block out VGA memory is committed.
Credits:
- raw framebuffer, VNC server, XHCI controller, USB bus/device emulation
and UEFI f/w support by Leon Dang
- VGA, console/g, initial VNC server by tychon@
- PS2 keyboard/mouse jointly done by tychon@ and Leon Dang
- hypervisor framebuffer mem support by neel@
Tested by: Michael Dexter, in a number of revisions of this code.
With the appropriate UEFI image, FreeBSD, Windows and Linux guests can
installed and run in graphics mode using the UEFI/GOP framebuffer.
Approved by: re (gjb)
Apply the LenovoFix (fake partition in pMBR is 2nd rather than 1st)
and GPT Active fix (mark the fake pMBR partition active) to respective
hardware that is confirmed to require such to boot correct.
Submitted by: Sam Fourman Jr. <sfourman@gmail.com> (ThinkPad W520)
Submitted by: Matthias Apitz <guru@unixarea.de> (Latitude E6330)
Approved by: re (gjb)
Sponsored by: ScaleEngine Inc.
A separate bootpool is used when the selected partition type is MBR
or when the disk is GELI encrypted and a UEFI loader is selected.
BIOS avoids the bootpool by using bootcode and loader that support GELI.
bsdinstall did not remount the bootpool after creating the main pool,
which caused an error when mkdir tried to create /boot/zfs
PR: 210717
Approved by: re (gjb)
Sponsored by: ScaleEngine Inc.
A couple of minor memory size option related nits:
- use common name 'memsize' (instead of 'max-size' or just 'size')
- bhyve: update usage with memsize unit suffix, drop legacy "MB"
unit
- bhyveload: update usage with memsize unit suffix
- bhyve(8): document default size
- bhyveload(8): use memsize formatting like it's done
in bhyve(8)
Reviewed by: wblock, grehan
Approved by: re (kib), wblock, grehan
Differential Revision: https://reviews.freebsd.org/D6952
usr.bin/lastcom/tests/Makefile
usr.sbin/sa/tests/Makefile
Set allow_architectures appropriately. These tests depend on golden
files that must be generated for each architecture, and haven't yet
been generated for all of them.
PR: 210566
PR: 204154
Reviewed by: ngie
Approved by: re (gjb)
MFC after: 4 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D6960
curses and libedit don't play well together. After last year's libedit
upgrade in head, they play even less well together. This change resets some
curses settings after they get screwed up by libedit calls. Without it,
gstat's interactive commands require an extra "enter", screw up the terminal
on exit, and screw up the display if the user enters an invalid filter
string.
PR: 204852
Submitted by: Keith White
Reviewed by: pfg
Approved by: re (gjb)
MFC after: 4 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D6934
A larger EFI file system size will facilitate multi-boot configurations
and the installation other EFI applications like firmware update tools.
200MB matches OS X.
Note that this changes only the partition size, not the file system that
bsdinstall places there. We need to do both, but as the partition size
is difficult to adjust later make this change for now so that at least
systems installed with FreeBSD 11.0 have a partition layout with room
to grow.
Reviewed by: allanjude, imp
Approved by: re (gjb)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D6935
usr.sbin/rpcbind/tests/addrmerge_test.c
Fix some sizeof calculations that work only by luck on 64-bit
platforms.
PR: 210314
Reviewed by: ngie
Approved by: re (kib)
Reported by: Mark Millard
MFC after: 4 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D6855
This is taken from the NetBSD versions listed below and adapted to the
makefs version in FreeBSD, along with a bug fix from cem@ that will be
sent to NetBSD.
Reviewed by: pfg
Approved by: re (gjb)
Obtained from: NetBSD
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D6835
This will help ensure that the right error is trickled up when the
function is called if the lock status is NFS_RESERR
Differential Revision: https://reviews.freebsd.org/D6622
Reviewed by: rmacklem
Approved by: re (gjb)
Tested with: fsx; svn info/svnversion (uses bdb locking); locktests from Bull http://nfsv4.bullopensource.org/tools/tests/locktest.php
MFC after: 2 weeks
Reported by: Coverity
CID: 1008161, 1304956
Sponsored by: EMC / Isilon Storage Division
Fix an error where vfs.root.mountfrom was not always set as required
when creating a bootpool. After the recent geliboot changes, it was only
set if the main pool was encrypted.
Also resolve an error where the bootpool was unmounted twice causing
bsdinstall to stop with an error message about the failed command.
Approved by: re (gjb)
Sponsored by: BSDCan Hacker Lounge
xdr_rpcproc, xdr_rpcprog and xdr_rpcvers were broken in older
versions of FreeBSD but fixed in r296394. Give them some use
hoping they help make the code somewhat more readable.
Allow to setup country and/or regulatory domain before scanning
(since channel list is affected by regulatory restrictions this may
impact scan results).
PR: 182600 (originally)
Differential Revision: https://reviews.freebsd.org/D6325
Not returning if rtype == RPCBVERS_STAT will cause us to overrun the inf array, as
it's defined to be exactly RPCBVERS_STAT elements in rpcb_prot.x:
> include/rpc/rpcb_prot.x:typedef rpcb_stat rpcb_stat_byvers[RPCBVERS_STAT];
The proposed change also matches the rest of the rtype upper bound checks in the
file, so the original change was likely a typo.
MFC after: 2 weeks
Reported by: Coverity
CID: 1007567
Reviewed by: truckman
Sponsored by: EMC / Isilon Storage Division
This is influenced by the ath3k driver from linux (circa 2013, this is
how long I've been sitting on this.)
It handles loading in firmware using the newer model, where it assembles
the right set of firmware blobs and board configuration based on the
device list and querying the device.
The older utility could only load in a single image - which sometimes
was ath3k-1.fw and sometimes was ath3k-2.fw. However, the ath3k maintainers
didn't want to keep adding in binaries that were just derivatives with a
separate board config, so they deleted ath3k-2.fw from the Linux firmware
repository and instead, well, did this.
Now, this has been tested against AR3011 and AR3012 NICs from the AR9285+BT
combo up through to the QCA9565+BT combo. It doesn't yet work with the
QCAFN222 NIC as that is some newer chip.
The firmware can be grabbed from https://github.com/erikarn/ath3kfw/ in
the share/firmware/ath3k directory. I'll update this utility over time
to support the newer firmware drops (newer than mid-2013) which should
pull in the QCNFA222 and subsequent chips.
Tested:
* AR9285 + BT
* AR9287 + BT
* AR9485 + BT
* AR9462 + BT
* QCA9565 + BT
nis_ypldap_enable and nis_ypldap_flags.
Also add an entry on ypldap(8) that it is a feature ready and
appears on FreeBSD 11.0.
Requested by: rodrigc
Relnotes: Yes
After going through the signal work list, during which do_sigwork()
is called and essentially does nothing because -s and -R were
specified on the command line, newsyslog will sleep for 10 seconds
as the (verbose) code says: "Pause 10 seconds to allow daemon(s)
to close log file(s)".
However, the man page verbiage for -R (and -s) seems quite clear
that this sleep() is unnecessary because the daemon was expected
to have already closed the log file before calling newsyslog.
PR: 210020
Submitted by: David A. Bright <david_a_bright@dell.com>
MFC after: 1 week
Sponsored by: Dell Inc.
Differential Revision: https://reviews.freebsd.org/D6727
