remove the now-redundant checks for RELEASE_CRUNCH. This originally
was defined for building smaller sysinstall images, but was later also
used by picobsd builds for a similar purpose. Now that we've moved
away from sysinstall, picobsd is the only remaining consumer of this
interface. Adding these two options reduces the RELEASE_CRUNCH
special cases in the tree by half.
We should not be leaking these interfaces to the outside world given
that it's much easier for third-party components to use the devel/atf
package from ports.
As a side-effect, we can also drop the ATF pkgconfig and aclocal files
from the base system. Nothing in the base system needs these, and it
was quite ugly to have to get them installed only so that a few ports
could build. The offending ports have been fixed to depend on
devel/atf explicitly.
Reviewed by: bapt
mode. This allows the binder to be functional in the child after the
fork (assuming no lazy loading of a filter is needed), but other rtld
services which require write lock on rtld_bind_lock cause deadlock, if
called by child.
Change the _rtld_atfork() to lock the bind lock in write mode, making
the rtld fully functional after the fork.
Pre-resolve the symbols which are called by the libthr' fork()
interposer, since dynamic resolution causes deadlock due to the
rtld_bind_lock already owned in the write mode.
Reported and tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
_rtld_debug_postinit(). [1]
- Use __compiler_membar() instead of inline asm in _r_debug_state() and
_r_debug_postinit(). [2]
Pointy hat to: markj [1]
Reported by: attilio [2]
Discussed with: kib
X-MFC-With: r265456
the victim process before its entry point is called, at which point probes
and DOF data are registered with the kernel. The r_debug_state hook cannot
be used for this purpose, as it is called before the program's init routines
are invoked and in particular before DOF data is registered (via drti.o).
Reviewed by: kib
MFC after: 2 weeks
and finish the job. ncurses is now the only Makefile in the tree that
uses it since it wasn't a simple mechanical change, and will be
addressed in a future commit.
first calls mmap() with the arguments PROT_NONE and MAP_ANON to reserve a
single, contiguous range of virtual addresses for the entire shared library.
Later, rtld calls mmap() with the the shared library's file descriptor
and the argument MAP_FIXED to place the text and data sections within the
reserved range. The rationale for mapping shared libraries in this way is
explained in the commit message for Revision 190885. However, this approach
does have an unintended, negative consequence. Since the first call to
mmap() specifies MAP_ANON and not the shared library's file descriptor, the
kernel has no idea what alignment the vm object backing the file prefers.
As a result, the reserved range's alignment is unlikely to be the same as
the vm object's, and so mapping with superpages becomes impossible. To
address this problem, this revision adds the argument MAP_ALIGNED_SUPER to
the first call to mmap() if the text section is larger than the smallest
superpage size.
To determine if the text section is larger than the smallest superpage
size, rtld must always fetch the page size information. As a result, the
private code for fetching the base page size in rtld's builtin malloc is
redundant. Eliminate it. Requested by: kib
Tested by: zbb (on arm)
Reviewed by: kib (an earlier version)
Discussed with: jhb
Change {atf,plain,tap}.test.mk to be internal implementation details of
bsd.test.mk. Makefiles that build tests should now only include bsd.test.mk
and declaratively specify what they want to build, without worrying about
the internal implementation of the mk files.
The reason for this change is to permit building test programs of different
interfaces from a single directory, which is something I had a need for
while porting tests over from src/tools/regression/.
Additionally, this change makes it possible to perform some other requested
changes to bsd.test.mk in an easier manner. Coming soon.
as possible. This does not change the wording in any way.
Remove the 3rd clause ("advertising clause") of the BSD license as
permitted by the University of Berkeley on July 22, 1999. While the
clause itself mentions Lawrence Berkeley Laboratory, UCB is the sole
copyright holder of this file.
Reviewed by: imp, emaste, eadler
MFC after: 2 weeks
Some modules do not align data at least to size of pointer, they uses a
smaller alignment, but our pointer should be aligned to its native
boundary, otherwise on some platforms, hardware alignment checking
will cause bus error.
It is a small and lightweight Mail Transport Agent.
It accepts mails from locally installed Mail User Agents (MUA) and delivers the
mails either locally or to a remote destination. Remote delivery includes
several features like TLS/SSL support, SMTP authentication and NULLCLIENT.
Make dma conditional to new WITHOUT_DMA option and make it respect WITHOUT_MAIL
Reviewed by: peter
Discussed with: emaste, bz, peter
saving the pointer will overwrite bytes belongs to another memory block
unexpectly, to fix the problem, use (allocated address + sizeof(void *)) as
initial value, and slip to next aligned address, so maximum extra bytes is
sizeof(void *) + align - 1.
Tested by: Andre Albsmeier < mail at ma17 dot ata dot myota dot orgndre >
device is an active kernel console and "off" otherwise. This is designed to
allow serial-booting x86 systems to provide a login prompt on the serial line
by default without providing one on all systems by default.
Comments and suggestions by: grehan, dteske, jilles
MFC after: 1 month
the max required alignment for the static tls segments, and honor it
when carving the pieces for next module, from the static space. Use
aligned allocator to get properly-aligned dynamic blocks.
Reported by: dt71@gmx.com
Reviewed by: kan
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
giving access to functionality that is not available in capability mode
sandbox. The functionality can be precisely restricted.
Start with the following services:
- system.dns - provides API compatible to:
- gethostbyname(3),
- gethostbyname2(3),
- gethostbyaddr(3),
- getaddrinfo(3),
- getnameinfo(3),
- system.grp - provides getgrent(3)-compatible API,
- system.pwd - provides getpwent(3)-compatible API,
- system.random - allows to obtain entropy from /dev/random,
- system.sysctl - provides sysctlbyname(3-compatible API.
Sponsored by: The FreeBSD Foundation
There is no reason to keep the two knobs separate: if tests are
enabled, the ATF libraries are required; and if tests are disabled,
the ATF libraries are not necessary. Keeping the two just serves
to complicate the build.
Reviewed by: freebsd-testing
Approved by: rpaulo (mentor)
used by auditing tools to determine the userland patch level when it
differs from what `uname -r` reports. This can happen when the system
is kept up-to-date using freebsd-update and the last SA did not touch
the kernel, or when a new kernel has been installed but the system has
not yet rebooted.
Approved by: re (glebius)
On MIPS the .dynamic section is read-only, so the pointer to rtld
information for debuggers cannot be stored there (in DT_DEBUG).
Instead, a special section .rld_map is used.
Sponsored by: DARPA, AFRL
Approved by: re (delphij)
available in 32-bit compatibility mode, unconditional.
Overhaul the man page, which had evolved more by accretion than by design.
Approved by: re (gjb)
MFC after: 3 weeks
PATH_MAX after the token substitution. This is wrong, because
origin_subst_one() performs the substitution on the whole rpath and
similar strings, which contain several pathes separated by colon. As
result, long (but correct) rpath consisting of many path elements is
rejected by the function.
Correct the problem by rewriting the origin_subst_one() to perform two
passes, first pass to calculate the number of substitutions to be
performed, and second pass to generate the resulting string. Second
pass allocates the memory for the result based on the count from the
first pass, without enforcing a limit.
Reported and tested by: pgj
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Normal libraries have base address 0 and are unaffected by this change.
PR: 176216
Submitted by: Damjan Jovanovic <damjan.jov@gmail.com>
Reviewed by: kib
MFC after: 1 week
Since ARP and routing are separated, "proxy only" entries
don't have any meaning, thus we don't need additional field
in sockaddr to pass SIN_PROXY flag.
New kernel is binary compatible with old tools, since sizes
of sockaddr_inarp and sockaddr_in match, and sa_family are
filled with same value.
The structure declaration is left for compatibility with
third party software, but in tree code no longer use it.
Reviewed by: ru, andre, net@
instead of /libexec/ld-elf.so.1. Below in the Makefile we execute
'chflags noschg ${DESTDIR}/usr/libexec/ld-elf.so.1', which follows
symlink and removes 'schg' flag from system's /libexec/ld-elf.so.1
instead of the one in DESTDIR. It is also more friendly to use
replative paths in symlink in case of jail/chroot environments.
Obtained from: WHEEL Systems
MFC after: 2 weeks
Rtld did not set FD_CLOEXEC on its internal file descriptors; therefore,
such a file descriptor may be passed to a process created by another thread
running in parallel to dlopen() or fdlopen().
No other threads are expected to be running during parsing of the hints
and libmap files but the file descriptors need not be passed to child
processes so add O_CLOEXEC there as well.
This change will break fdlopen() (as used by OpenPAM) on kernels without
F_DUPFD_CLOEXEC (added in July). Note that running new userland on old
kernels is not supported.
Reviewed by: kib
Previously atrun refused to run jobs if load average was not below fixed limit of 1.5.
PR: 173175
Reviewed by: peterj
Approved by: trasz (mentor)
MFC after: 2 weeks
current version of FreeBSD, this isn't guarenteed by the API.
Custom security modules, or future implementations of the setuid and
setgid may fail.
Submitted by: Erik Cederstrand
Approved by: cperciva
MFC after: 3 days
but committing it helps to get everyone on the same page and makes
sure we make progress.
Tinderbox breakages that are the result of this commit are entirely
the committer's fault -- in other words: buildworld testing on amd64
only.
Credits follow:
Submitted by: Garrett Cooper <yanegomi@gmail.com>
Sponsored by: Isilon Systems
Based on work by: keramida@
Thanks to: gnn@, mdf@, mlaier@, sjg@
Special thanks to: keramida@
In addition to adding missing `static' keywords:
- bin/dd: Pull in `extern.h' to guarantee consistency with source file.
- libexec/rpc.rusersd: Move shared globals into an extern.h.
- libexec/talkd: Move `debug' and `hostname' into extern.h.
- usr.bin/cksum: Put counters in extern.h, as they are used by ckdist/mtree.
- usr.bin/m4: Move `end_result' into extern.h.
- usr.sbin/services_mkdb: Move shared globals into an extern.h.
In addition to adding `static' where possible:
- bin/date: Move `retval' into extern.h to make it visible to date.c.
- bin/ed: Move globally used variables into ed.h.
- sbin/camcontrol: Move `verbose' into camcontrol.h and fix shadow warnings.
- usr.bin/calendar: Remove unneeded variables.
- usr.bin/chat: Make `line' local instead of global.
- usr.bin/elfdump: Comment out unneeded function.
- usr.bin/rlogin: Use _Noreturn instead of __dead2.
- usr.bin/tset: Pull `Ospeed' into extern.h.
- usr.sbin/mfiutil: Put global variables in mfiutil.h.
- usr.sbin/pkg: Remove unused `os_corres'.
- usr.sbin/quotaon, usr.sbin/repquota: Remove unused `qfname'.
This self-written compiler warning, which is hopefully going to be
committed into LLVM sources soon, warns about potentially missing
`static' keywords, similar to -Wmissing-prototypes.
- bin/pax: Move external declaration of chdname and s_mask into extern.h.
- bin/setfacl: Move setfacl.c-specific stuff out of setfacl.h.
- sbin/mount_fusefs: Remove char *progname; use getprogname().
- others: add `static' where possible.
The reserved space for fmt was exactly sufficient for a two-digit value of
MAXLOGNAME - 1.
PR: bin/171815
Submitted by: Jeremy Huddleston Sequoia
MFC after: 1 week
all in one command, with no permissions race.
2. Simplify the rotation logic by cd'ing into the directory, with a test
to make sure that it succeeds.
3. Remove any files numbered higher than entropy_save_num. This helps when
the user reduces the number, and may be useful for other purposes down
the road.
4. Simplify the rotation logic by first testing the common case (it's a
regular file) then testing if something else exists with the same name
using elif. Also switch from using jot to simpler countdown format.
5. Fix logger lines and error messages to be more consistent, and wrap the
code more consistently in the 80 column range. The "not a regular file"
error message was mistakenly wrapped entirely in "quotes" which caused
logger to include line-wrapping whitespace. Change that to wrap only
the variables in quotes, which is both consistent and works better.
6. Update copyright to reflect the fact that changes were made this year.
Parts of 2-4 were taken from etc/periodic/daily/310.accounting
This structure is not part of POSIX. According to POSIX, gettimeofday()
has the following prototype:
int gettimeofday(struct timeval *restrict tp, void *restrict tzp);
Also, POSIX states that gettimeofday() shall return 0 (as long as tzp is
not used). Remove dead error handling code. Also use NULL for a
nul-pointer instead of integer 0.
While there, change all pieces of code that only use tv_sec to use
time(3), as this provides less overhead.
The place where the function is called can be reached if object loading
and relocation fails too, in which case obj pointer will be NULL. Do not
call process_nodelete then, or crash will follow.
Pointy hat to: kan
Trying to up the reference from the load loop risks missing dependencies
that have not been loaded yet.
MFC afer: 1 week
Reported by: nox
Reviewd by: kib
This is not strictly required with the current ABI but will be when we
switch to the ARM EABI. The aapcs requires the stack to be 4 byte aligned
at all times and 8 byte aligned when calling a public subroutine where the
current ABI only requires sp to be a multiple of 4.
by John Marino <draco@marino.st>, with the following (edited) commit
message
Date: Sat, 24 Mar 2012 06:40:50 +0100
Subject: [PATCH 1/1] rtld: Implement DT_RUNPATH and -z nodefaultlib
DT_RUNPATH is incorrectly being considered as an alias of DT_RPATH. The
purpose of DT_RUNPATH is to have two different types of rpath: one that
can be overridden by the environment variable LD_LIBRARY_PATH and one that
can't. With the currently implementation, LD_LIBRARY_PATH will always
trump any embedded rpath or runpath tags.
Current path search order by rtld:
==================================
LD_LIBRARY_PATH
DT_RPATH / DT_RUNPATH (always the same)
ldconfig hints file (default: /var/run/ld-elf.so.hints)
/usr/lib
New path search order by rtld:
==============================
DT_RPATH of the calling object if no DT_RUNPATH
DT_RPATH of the main binary if no DT_RUNPATH and binary isn't calling obj
LD_LIBRARY_PATH
DT_RUNPATH
ldconfig hints file
/usr/lib
The new path search matches how the linux runtime loader works. The other
major added feature is support for linker flag "-z nodefaultlib". When
this flag is passed to the linker, rtld will skip all references to the
standard library search path ("/usr/lib" in this case but it could handle
more color delimited paths) except in DT_RPATH and DT_RUNPATH.
New path search order by rtld with -z nodefaultlib flag set:
============================================================
DT_RPATH of the calling object if no DT_RUNPATH
DT_RPATH of the main binary if no DT_RUNPATH and binary isn't calling obj
LD_LIBRARY_PATH
DT_RUNPATH
ldconfig hints file (skips all references to /usr/lib)
FreeBSD notes:
- we fixed some bugs which were submitted to DragonFly and merged there
as commit 1ff8a2bd3eb6e5587174c6a983303ea3a79e0002;
- we added LD_LIBRARY_PATH_RPATH environment variable to switch to
the previous behaviour of considering DT_RPATH a synonym for DT_RUNPATH;
- the FreeBSD default search path is /lib:/usr/lib and not /usr/lib.
Reviewed by: kan
MFC after: 1 month
MFC note: flip the ld_library_path_rpath default value for stable/9
relocations are performed before the object's initializer is called.
When dlopen()ing an object, relocate the whole DAG rooted in the
object instead of only relocating the object itself and list of newly
loaded dependencies.
Reversed sequence currently can occur if the same object is a
dependency for both filtee and filter, since filtees are loaded
typically during the relocation processing, when some filter
dependencies might be already loaded but not relocated yet.
Reported and tested by: swills
Reviewed by: kan
MFC after: 1 week
object, and eliminate the pread(2) call as well [1]. Mmap the first
page of the object temporaly, and unmap it on error or last use.
Potentially, this leaves one-page gap between succeeding dlopen(3),
but there are other mmap(2) consumers as well.
Fix several cases were the whole mapping of the object leaked on error.
Use MAP_PREFAULT_READ for mmap(2) calls which map real object pages [2].
Insipired by the patch by: Ian Lepore <freebsd damnhippie dyndns org> [1]
Suggested by: alc [2]
MFC after: 2 weeks
object for which digest_dynamic1() was not done yet. Just return
EINVAL and do not try to dereference NULL buckets hash array.
This seems to happen on ia64 for rtld object itself, where the
R_IA_64_FPTR64LSB relocations require symbol lookup. The dynamic
linker itself does not rely on identity of the C-level function
pointers (i.e. function descriptors).
Reported and reviewed by: marcel
MFC after: 8 days
include <file>:
Parse the contents of file before continuing with the current file.
includedir <dir>:
Parse the contents of every file in dir that ends in .conf before continuing
with the current file.
Any file or directory encountered while processing include or includedir
directives will be parsed exactly once, even if it is encountered multiple
times.
Reviewed by: kib, des
Approved by: des (mentor)
MFC after: 1 month
hash elements, and a helper matched_symbol() which match the given hash
entry and request, performing needed type and version checks.
Based on dragonflybsd support for GNU hash by John Marino <draco marino st>
Reviewed by: kan
Tested by: bapt
MFC after: 2 weeks
When multiple users share the same UID, the old code will simply pick an
arbitrary username to attach to the utmpx entries. Make the code a bit
more accurate by first checking whether getlogin() returns a username
which corresponds to the uid of the calling process. If this fails,
simply fall back to picking an arbitrary username.
Reported by: saurik on GitHub
MFC after: 2 weeks
through the filter loading call chain. This fixes attempts to
write-lock the already locked rtld_bind_lock when filter loading is
initiated by relocation of dlopening dso.
Reported and tested by: Taku YAMAMOTO <taku tackymt homeip net>
MFC after: 1 week
for the same object. This can happen when object is a dependency of the
dlopen()ed dso. When called several times, we waste time due to unneeded
processing, and memory, because obj->vertab is allocated anew on each
iteration.
Reviewed by: kan
MFC after: 2 weeks
