While CTL has concept of port options, used at least for iSCSI ports now,
before this change it was impossible to set them manually. There still
no user-configurable port options now, but I am planning to change that.
When checking the length of the mutual secret password the variable for
the secret password was used by mistake. This resulted in ctld never
warning about the length of the mutual secret being wrong even if it was.
MFC after: 3 days
Sponsored by: iXsystems
This change introduces new target option "port", that assigns current target
to specified CTL port. On config application ctld(8) will apply LUN mapping
according to target configuration to specified port and bring the port up.
On shutdown cltd(8) will remove the mapping and put the port down.
This change allows to configure both iSCSI and FibreChannel targets in the
same configuration file in alike way.
Kernel side support was added earlier at r278037.
MFC after: 2 weeks
Relnotes: yes
Sponsored by: iXsystems, Inc.
target iSCSI offload. Add mechanism to query maximum receive data segment
size supported by chosen hardware offload module, and use it in ctld(8)
to determine the value to advertise to the other side.
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
This change allows multiple "portal-group" options to be specified per
target. Each of them may include new optional auth-group name parameter
to override per-target auth parameters for specific portal group.
Kernel side support was added earlier at r278161.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
While ctld(8) still does not allow multiple portal groups per target
to be configured, kernel should now be able to handle it.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
Replace iSCSI-specific LUN mapping mechanism with new one, working for any
ports. By default all ports are created without LUN mapping, exposing all
CTL LUNs as before. But, if needed, LUN mapping can be manually set on
per-port basis via ctladm. For its iSCSI ports ctld does it via ioctl(2).
The next step will be to teach ctld to work with FibreChannel ports also.
Respecting additional flexibility of the new mechanism, ctl.conf now allows
alternative syntax for LUN definition. LUNs can now be defined in global
context, and then referenced from targets by unique name, as needed. It
allows same LUN to be exposed several times via multiple targets.
While there, increase limit for LUNs per target in ctld from 256 to 1024.
Some initiators do not support LUNs above 255, but that is not our problem.
Discussed with: trasz
MFC after: 2 weeks
Relnotes: yes
Sponsored by: iXsystems, Inc.
establishing connection.
This is a workaround for Chelsio TOE driver, that does not update socket
buffer size in hardware after connection established, and unless that is
done beforehand, kernel code will stuck, attempting to send/receive full
PDU at once.
MFC after: 1 week
Previous order confused initiators with messages about "removed" LUNs
during simple ctld restart without any real config change. After this
commit initiators only reestablish lost connection, receive "Power on
occurred" UNIT ATTENTION status and continue normal operation.
MFC after: 1 month
for reasons yet unknown; don't make it increment cumulated_error as a kind
of temporary workaround.
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
are returned during discovery based on initiator portal, name, and CHAP
credentials.
Reviewed by: mav@
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
This makes ctld(8) register its iSCSI targets and portals on configured
iSNS servers to allow initiators find them without active discovery.
Fetching of allowed initiators from iSNS is not implemented now, so target
ACLs still should be configured manually.
Reviewed by: trasz@
MFC after: 1 month
Sponsored by: iXsystems, Inc.
reload also if that size was not specified in the new configuration.
Previously it happened only if size was explicitly changed in config.
MFC after: 3 days
Having single port for all iSCSI connections makes problematic implementing
some more advanced SCSI functionality in CTL, that require proper ports
enumeration and identification.
This change extends CTL iSCSI API, making ctld daemon to control list of
iSCSI ports in CTL. When new target is defined in config fine, ctld will
create respective port in CTL. When target is removed -- port will be
also removed after all active commands through that port properly aborted.
This change require ctld to be rebuilt to match the kernel.
As a minor side effect, this allows to have iSCSI targets without LUNs.
While that may look odd and not very useful, that is not incorrect.
needed it to be already enabled, because listening in proxy mode
requires it; however, it's conf_apply() that opens pidfiles,
so it resulted in port being enabled before pidfile was opened.
This was not so bad, but it was also disabled when pidfile couldn't
be opened due to ctld already running; this means that starting
second ctld instance screwed up the first.
Sponsored by: The FreeBSD Foundation
