commands during controller initialization.
DELAY() does not work here during config_intrhook context - we need to
explicitly relinquish the CPU for the admin command completion to
get processed.
Sponsored by: Intel
Reported by: Adam Brooks <adam.j.brooks@intel.com>
Reviewed by: carl
MFC after: 3 days
and firmware revision in the controller's identify structure.
Also modify consumers of these fields to ensure they only use the
specified number of bytes for their respective fields.
Sponsored by: Intel
Reviewed by: carl
MFC after: 3 days
a new firmware command.
NVMe controllers may support up to 7 firmware slots for storing of
different firmware revisions. This new firmware command supports
firmware replacement (i.e. firmware download) with or without immediate
activation, or activation of a previously stored firmware image. It
also supports selection of the firmware slot during replacement
operations, using IDENTIFY information from the controller to
check that the specified slot is valid.
Newly activated firmware does not take effect until the new controller
reset, either via a reboot or separate 'nvmecontrol reset' command to the
same controller.
Submitted by: Joe Golio <joseph.golio@emc.com>
Obtained from: EMC / Isilon Storage Division
MFC after: 3 days
max transfer size. This guards against rogue commands coming in from
userspace.
Also add KASSERTS for the virtual address and unmapped bio cases, if the
transfer size exceeds the controller's max transfer size.
Sponsored by: Intel
MFC after: 3 days
Also allow admin commands to transfer up to this maximum I/O size, rather
than the artificial limit previously imposed. The larger I/O size is very
beneficial for upcoming firmware download support. This has the added
benefit of simplifying the code since both admin and I/O commands now use
the same maximum I/O size.
Sponsored by: Intel
MFC after: 3 days
This includes a new IOCTL to support a generic method for nvmecontrol(8) to pass
IDENTIFY, GET_LOG_PAGE, GET_FEATURES and other commands to the controller, rather than
separate IOCTLs for each.
Sponsored by: Intel
These were added early on for benchmarking purposes to avoid the mapped I/O
penalties incurred in kern_physio. Now that FreeBSD (including kern_physio)
supports unmapped I/O, the need for these NVMe-specific routines no longer exists.
Sponsored by: Intel
NULL. This simplifies decisions around if/how requests are routed through
busdma. It also paves the way for supporting unmapped bios.
Sponsored by: Intel
later found to not be usable because the controller doesn't support the
same number of queues.
This is not the normal case, but does occur with the Chatham prototype
board.
Sponsored by: Intel
mechanism.
Now that all requests are timed, we are guaranteed to get a completion
notification, even if it is an abort status due to a timed out admin
command.
This has the effect of simplifying the controller and namespace setup
code, so that it reads straight through rather than broken up into
a bunch of different callback functions.
Sponsored by: Intel
Reviewed by: carl
start or reset. Also add a notifier for NVMe consumers for controller fail
conditions and plumb this notifier for nvd(4) to destroy the associated
GEOM disks when a failure occurs.
This requires a bit of work to cover the races when a consumer is sending
I/O requests to a controller that is transitioning to the failed state. To
help cover this condition, add a task to defer completion of I/Os submitted
to a failed controller, so that the consumer will still always receive its
completions in a different context than the submission.
Sponsored by: Intel
Reviewed by: carl
This is just as effective, and removes the need for a bunch of admin commands
to a controller that's going to be disabled shortly anyways.
Sponsored by: Intel
Reviewed by: carl
start process.
The spec indicates the OS driver should use Set Features (Software
Progress Marker) to set the pre-boot software load count to 0
after the OS driver has successfully been initialized. This allows
pre-boot software to determine if there have been any issues with the
OS loading.
Sponsored by: Intel
Reviewed by: carl
This flag was originally added to communicate to the sysctl code
which oids should be built, but there are easier ways to do this. This
needs to be cleaned up prior to adding new controller states - for example,
controller failure.
Sponsored by: Intel
Reviewed by: carl
The controller's IDENTIFY data contains MDTS (Max Data Transfer Size) to
allow the controller to specify the maximum I/O data transfer size. nvme(4)
already provides a default maximum, but make sure it does not exceed what
MDTS reports.
Sponsored by: Intel
Reviewed by: carl
that if a specific I/O repeatedly times out, we don't retry it indefinitely.
The default number of retries will be 4, but is adjusted using hw.nvme.retry_count.
Sponsored by: Intel
Reviewed by: carl
specified log page.
This satisfies the spec condition that future async events of the same type
will not be sent until the associated log page is fetched.
Sponsored by: Intel
Reviewed by: carl
NVMe error log entries include status, so breaking this out into
its own data structure allows it to be included in both the
nvme_completion data structure as well as error log entry data
structures.
While here, expose nvme_completion_is_error(), and change all of
the places that were explicitly looking at sc/sct bits to use this
macro instead.
Sponsored by: Intel
Reviewed by: carl
This protects against cases where a controller crashes with multiple
I/O outstanding, each timing out and requesting controller resets
simultaneously.
While here, remove a debugging printf from a previous commit, and add
more logging around I/O that need to be resubmitted after a controller
reset.
Sponsored by: Intel
Reviewed by: carl
While aborts are typically cleaner than a full controller reset, many times
an I/O timeout indicates other controller-level issues where aborts may not
work. NVMe drivers for other operating systems are also defaulting to
controller reset rather than aborts for timed out I/O.
Sponsored by: Intel
Reviewed by: carl
On any I/O timeout, check for csts.cfs==1. If set, the controller
is reporting fatal status and we reset the controller immediately,
rather than trying to abort the timed out command.
This changeset also includes deferring the controller start portion
of the reset to a separate task. This ensures we are always performing
a controller start operation from a consistent context.
Sponsored by: Intel
Reviewed by: carl
invoke it from nvmecontrol(8).
Controller reset will be performed in cases where I/O are repeatedly
timing out, the controller reports an unrecoverable condition, or
when explicitly requested via IOCTL or an nvme consumer. Since the
controller may be in such a state where it cannot even process queue
deletion requests, we will perform a controller reset without trying
to clean up anything on the controller first.
Sponsored by: Intel
Reviewed by: carl
Also add logic to clean up all outstanding asynchronous event requests
when resetting or shutting down the controller, since these requests
will not be explicitly completed by the controller itself.
Sponsored by: Intel
