This paniced my one of my machines one time too many :-( and there is
no sign of a solution in the pipeline. The deltas are still easily
available in cvs. The problem is that if the parent has been swapped
out, the child process cannot grope around in the parent's UPAGES to
see the sigact[] array or it will fault. This probably is a showstopper
for this implementation anyway.
is the diagnostics register at offset 0x93. When bit 5 is set in this
register, bits 4-7 in ExCA register 0x5 being 0000 are required for
pci interrupt routing. When it is clear, then bit 4 of ExCA register
0x3 is used to enable it.
The only other issue is that when you route interrupts this way, you
must read ExCA register 0x4 in order to clear the interrupt, else you
get an interrupt storm.
Deal with this requirement by setting things up. It is believed that
this won't hurt other chipsets, but other chipsets may require their
own work arounds.
a temporary array to store struct buf pointers if the list doesn't
fit in a local array. Usually it frees the array when finished,
but if it jumps to the 'again' label and the new list does fit in
the local array then it can forget to free a previously malloc'd
M_TEMP memory.
Move the free() up a line so that it frees any previously allocated
memory whether or not it needs to malloc a new array.
Reviewed by: dillon
defined to 0 in the non-SMP case, which very much makes sense as it
permits its usage in per-CPU initialization loops (for an example, check
out subr_mbuf.c).
Further, on a UP system, make mb_alloc always use the first per-CPU
container, regardless of cpuid (i.e. remove reliability on cpuid in the
UP case).
Requested by: alfred
asleep() and await() functions split the functionality of msleep() up into
two halves. Only the asleep() half (which is what puts the process on the
sleep queue) actually needs the lock usually passed to msleep() held to
prevent lost wakeups. await() does not need the lock held, so the lock
can be released prior to calling await() and does not need to be passed in
to the await() function. Typical usage of these functions would be as
follows:
mtx_lock(&foo_mtx);
... do stuff ...
asleep(&foo_cond, PRIxx, "foowt", hz);
...
mtx_unlock&foo_mtx);
...
await(-1, -1);
Inspired by: dillon on the couch at Usenix
the first sector of the emulated floppy to contain a valid MS-DOS BPB that
it can modify. Since boot1 is the first sector of boot.flp, this resulted
in the BIOS overwriting part of boot1: specifically the function used to
read in sectors from the disk.
Submitted by: Mark Peek <mark@whistle.com>
Submitted by: Doug Ambrisko <ambrisko@ambrisko.com>
PR: i386/26382
Obtained from: NetBSD, OpenBSD (the example BPB)
MFC after: 1 month
of debugging the current process when that is in conflict with other
restrictions (such as jail, unprivileged_procdebug_permitted, etc).
o This corrects anomolies in the behavior of
kern.security.unprivileged_procdebug_permitted when using truss and
ktrace. The theory goes that this is now safe to use.
Obtained from: TrustedBSD Project
MIB entries.
o Relocate kern.suser_permitted to kern.security.suser_permitted.
o Introduce new kern.security.unprivileged_procdebug_permitted, which
(when set to 0) prevents processes without privilege from performing
a variety of inter-process debugging activities. The default is 1,
to provide current behavior.
This feature allows "hardened" systems to disable access to debugging
facilities, which have been associated with a number of past security
vulnerabilities. Previously, while procfs could be unmounted, other
in-kernel facilities (such as ptrace()) were still available. This
setting should not be modified on normal development systems, as it
will result in frustration. Some utilities respond poorly to
failing to get the debugging access they require, and error response
by these utilities may be improved in the future in the name of
beautification.
Note that there are currently some odd interactions with some
facilities, which will need to be resolved before this should be used
in production, including odd interactions with truss and ktrace.
Note also that currently, tracing is permitted on the current process
regardless of this flag, for compatibility with previous
authorization code in various facilities, but that will probably
change (and resolve the odd interactions).
Obtained from: TrustedBSD Project
This is to be friendly with non-IPv6 peer (If the peer complains due to
lack of IPv6CP, drop IPv6CP). This basically implements "RXJ+" state
transition in the RFC.
Obtained from: NetBSD
o Move PIOCSRESOURCE from pccard to pcic so the kernel can give pccardd
better hints as to what resources to use.
o Implement an undocumented hw.pcic.interrupt_route to allow people that
need to do so to route their interrupts in a non-standard way.
o Only preallocate a resource in probe if we're routing via pci.
o If we aren't routing via pci, then set the irq to use explicitly
to defeat the automatic IRQ routing of the pci layer.
This, with the pccardd code should be close to what can be committed
to -stable.
- mostly complete kernel pmap support, and tested but currently turned
off userland pmap support
- low level assembly language trap, context switching and support code
- fully implemented atomic.h and supporting cpufunc.h
- some support for kernel debugging with ddb
- various header tweaks and filling out of machine dependent structures
to a new architecture. This is the base of the sparc64 port, but contains
limited machine dependent code, and can be used a base for ports. Included
are:
- standard machine dependent headers, tweaked for a 64 bit, big endian
architecture, including empty versions of all the machine dependent
structures
- a machine independent atomic.h, which can be used until a port has
support for interrupts and the operations really need to be atomic
- stub versions of all the machine dependent functions, which panic
when called and print out the name of the function that needs to
be implemented. functions which are normally in assembly files are
not included, but this should reduce the number of different undefined
references on the first few compiles from hundreds to 5 or 6
Given minimal startup code and console support it should be trivial to
make this compile and run the first few sysinits on almost any architecture.
Requested by: alfred, imp, jhb
dynamic symbol table buckets and chains. The sparc64 toolchain uses 32
bit .hash entries, unlike other 64 bits architectures (alpha), which use
64 bit entries.
Discussed with: dfr, jdp
a standard cell_t type for the fields of all argument structs. Also
make ihandle_t and phandle_t unsigned to avoid sign extension problems.
Approved by: benno
FreeBSD _does_ define ENOMSG, so no need for checking if we support it.
Inspired by PR: 22470
Which was submitted by: Bjorn Tornqvist <bjorn@west.se>
MFC after: 1 week
in the case where there are no interrupts routed for it does not
contain enough space to use it to route an interrupt. In the case
where we need to route an interrupt, throw away the returned buffer
and create a new one containing the interrupt we want.
boot time. Loading as a module once the system is up and running
doesn't make any sense.
- Fix acpi_FindIndexedResource (it would only check the first resource),
changes the calling interface.
- Add a new helper function (acpi_AppendBufferResource) to help building
buffers containing resources.
- Remove the beer-ware license (reqested by phk)
- Reorganise so that the PIIX4 workaround code is kept together, and
switch the workaround function via the timecounter struct, saving
a compare in the read-timecounter codepath. Also indicate that
the workaround is active by changing the timecounter hardware string.
either what's in NVRAM or what the safe defaults would be if we lack NVRAM.
Then we rename cur_XXXX to actv_XXXX (these are the currently active settings)
and the dev_XXX settings to goal_XXXX (these are the settings which we want
cur_XXXX to converge to).
This probably isn't entirely final as yet- but it's a lot closer to now
being what it should be, including allowing camcontrol to actually set
specific settings.
either what's in NVRAM or what the safe defaults would be if we lack NVRAM.
Then we rename cur_XXXX to actv_XXXX (these are the currently active settings)
and the dev_XXX settings to goal_XXXX (these are the settings which we want
cur_XXXX to converge to).
Roll core minor.
either what's in NVRAM or what the safe defaults would be if we lack NVRAM.
Then we rename cur_XXXX to actv_XXXX (these are the currently active settings)
and the dev_XXX settings to goal_XXXX (these are the settings which we want
cur_XXXX to converge to).
Handle both old and new TARGIOALLOCUNIT/TARGIOFREEUNIT cases- the new
one allows us to specify inquiry data we want to use.
Handle more of the CAM_DIS_DISCONNECT case.
Move TARGCTLIOALLOCUNIT to OTARGCTLIOALLOCUNIT, TARGCTLIOFREEUNIT
to OTARGCTLIOFREEUNIT and redefine old associated structure to be
old_ioc_alloc_unit- deprecation but preservation of binaries.
Add new structure for same- but this one contains a pointer to
user defined INQUIRY data so you can define what the target
device looks like to the outside world.
1. If we get frozen, unfreeze for disable disconnects.
2. Put CAM_DIS_DISCONNECT commands at the head of the work queue
(we have a target still connected and we can't run anything else
until this command completes).
If we had an error sending the last CTIO, unfreeze the queue anyway.
