The callout subsystem already handles early callouts and schedules
the first clock interrupt appropriately based on the currently pending
callouts. The one nit to fix was that callouts scheduled via C_HARDCLOCK
during early boot could fire too early once timers were enabled as the
per-CPU base time is always zero until timers are initialized. The change
in callout_when() handles this case by using the current uptime as the
base time of the callout during bootup if the per-CPU base time is zero.
Reviewed by: kib
MFC after: 2 weeks
Sponsored by: Netflix
The size can be changed by side effect of modifying kern.maxvnodes.
Since numbucketlocks was not modified, setting a sufficiently low value
would give more locks than actual buckets, which would then lead to
corruption.
Force the number of buckets to be not smaller.
Note this should not matter for real world cases.
Reported and tested by: pho
The swap pager enqueues laundered pages near the head of the inactive queue
to avoid another trip through LRU before reclamation. This change adds
support for this behaviour to the vnode pager and makes use of it in UFS and
ext2fs. Some ioflag handling is consolidated into a common subroutine so
that this support can be easily extended to other filesystems which make use
of the buffer cache. No changes are needed for ZFS since its putpages
routine always undirties the pages before returning, and the laundry
thread requeues the pages appropriately in this case.
Reviewed by: alc, kib
Differential Revision: https://reviews.freebsd.org/D8589
This avoids the time-warp after kthreads have started running and the
required fixup to td_slptick and td_blktick in the EARLY_AP_STARTUP
case. Now, 'ticks' is initialized before any kthreads are created or
any context switches are performed.
Tested by: gavin
MFC after: 2 weeks
Sponsored by: Netflix
always audit the file-descriptor number and vnode information for all
fnctl(2) commands, not just locking-related ones. This was likely an
oversight in the original adaptation of this code from XNU.
MFC after: 3 days
Sponsored by: DARPA, AFRL
do any speculations about readahead, and use exactly the amount of readahead
specified by user. E.g. setting SF_FLAGS(0, SF_USER_READAHEAD) will guarantee
that no readahead at all will be performed.
sendfile_swapin() loop works this way:
- Find first invalid page in the request.
- Do vm_pager_has_page() and get count of pages, that can be taken in
single I/O.
- Trim valid pages from the end of the request.
- Cycle through the request and substitute to bogus_page all valid
pages that are in the middle of the request.
- After I/O launched (pager copies array of pages into buf(9), it
is important to restore proper page pointers with help vm_page_lookup().
Count bogus pages used and report them in sendfile stats.
not remove user-space visible fields from vm_cnt or all of the references to
cached pages from comments. Those changes will come later.)
Reviewed by: kib, markj
Tested by: pho
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D8497
The negative list shrinker can demote an entry with only hotlist + neglist
locks held. On the other hand entry removal possibly sets the NCF_DVDROP
without aformentioned locks held prior to detaching it from the respective
netlist., which can lose the update made by the shrinker.
Reported and tested by: truckman
Although the higher end MIPS hardware handles cache aliasing issues in
hardware, the older cores (r4k, etc) and some compile versions of the
newer cores (mips24k, mips34k, mips74k) don't have this feature.
This means we end up with some very unfortunate behaviour that was
made very obvious by some recent changes to the FFS pager by kib.
So, flip this off until we get our MIPS pmap/cache code upgraded to
handle aliased pages in software.
Discussed with: kib, bsdimp, juli
The default (512) wastes quite a bit of space which doesn't really buy
us much on highly embedded systems which don't take a lot of locks in
parallel.
This makes it at least build time configurable so people can experiment.
Currently mount update keeps vfs_busy(9) reference on the mount point
during MNT_UPDATE VFS_MOUNT() vfsops call. This already provides the
exclusion, but is problematic for filesystems which need to perform
namei(9) during VFS_MOUNT(MNT_UPDATE) operations, e.g. to refresh
mnt_from path, because namei(9) must not be called while the
vfs_busy(9) reference is owned.
Check for MNT_UPDATE flag before setting MNTK_UNMOUNT, and for
MNTK_UNMOUNT before entering innards of vfs_domount_update(), failing
syscalls with EBUSY if conflict is detected. Keep vfs_busy(9)
reference around VFS_MOUNT(MNT_UPDATE) calls still to not change VFS
KPI.
In the update path in ffs_mount(), drop vfs_busy() reference around
namei(), which is now safe due to unmount never executing in parallel
with VFS_MOUNT(MNT_UPDATE), and which avoids the deadlock.
Reported and tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
- Send IPI wakeups once SMP is started even if cold is true.
- Permit preemptions when cold is true.
These changes are needed for EARLY_AP_STARTUP.
MFC after: 2 weeks
Sponsored by: Netflix
The other CPU might resume and see a still-empty runq and go back to
sleep before sched_add() adds the thread to the runq. This results
in a lost wakeup and a potential hang if the system is otherwise
completely idle.
The race originated due to a micro-optimization (my fault) in 4BSD in
that it avoided putting a thread on the run queue if the scheduler was
going to preempt to the new thread. To avoid complexity while fixing
this race, just drop this optimization. 4BSD now always sets the
"owepreempt" flag when a preemption is warranted and defers the actual
preemption to the thread_unlock of the caller the same as ULE.
MFC after: 2 weeks
Sponsored by: Netflix
Pass current thread credentials instead of NOCRED.
Only allow unmapped buffers for filesystem which proclaimed the support.
For all filesystems which currently use buffer pager (UFS, msdosfs and
cd9660), the changes are effectively nop.
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
vp->v_mount->mnt_vnodecovered unlocked. This allowed unmount to race.
Lock vnode after we noticed the VV_ROOT flag. See comments for
explanation why unlocked check for the flag is considered safe.
Reported and tested by: avg
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
we never try to sleep while the thread is on a sleepqueue.
Reviewed by: jhb
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D8422
If dotdot lookup does not escape from the file descriptor passed as
the lookup root, we can allow the component traversal. Track the
directories traversed, and check the result of dotdot lookup against
the recorded list of the directory vnodes.
Dotdot lookups are enabled by sysctl vfs.lookup_cap_dotdot, currently
disabled by default until more verification of the approach is done.
Disallow non-local filesystems for dotdot, since remote server might
conspire with the local process to allow it to escape the namespace.
This might be too cautious, provide the knob
vfs.lookup_cap_dotdot_nonlocal to override as well.
Idea by: rwatson
Discussed with: emaste, jonathan, rwatson
Reviewed by: mjg (previous version)
Tested by: pho (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 2 week
Differential revision: https://reviews.freebsd.org/D8110
process of being unmounted. Previously it would skip them, even if the
unmount eventually failed eg due to the filesystem being busy.
This behaviour broke autounmountd(8) - if you tried to manually unmount
a mounted filesystem, using 'automount -u', and the autounmountd attempted
to refresh the filesystem list in that very moment, it would conclude that
the filesystem got unmounted and not try to unmount it afterwards.
Reviewed by: kib@
Tested by: pho@
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D8030
Upstream the BUF_TRACKING and FULL_BUF_TRACKING buffer debugging code.
This can be handy in tracking down what code touched hung bios and bufs
last. The full history is especially useful, but adds enough bloat that
it shouldn't be enabled in release builds.
Function names (or arbitrary string constants) are tracked in a
fixed-size ring in bufs. Bios gain a pointer to the upper buf for
tracking. SCSI CCBs gain a pointer to the upper bio for tracking.
Reviewed by: markj
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D8366
not a bitfield. For the intended usage - being passed either MNT_WAIT,
or MNT_NOWAIT - this shouldn't introduce any changes in behaviour.
Reviewed by: jhb@
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D8373
which also use buffer cache.
Most important addition to the code is the handling of filesystems
where the block size is less than the machine page size, which might
require reading several buffers to validate single page.
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
On several Intel chipsets, diagnostic NMIs sent from BMC or NMIs
reporting hardware errors are broadcasted to all CPUs.
When kernel is configured to enter kdb on NMI, the outcome is
problematic, because each CPU tries to enter kdb. All CPUs are
executing NMI handlers, which set the latches disabling the nested NMI
delivery; this means that stop_cpus_hard(), used by kdb_enter() to
stop other cpus by broadcasting IPI_STOP_HARD NMI, cannot work. One
indication of this is the harmless but annoying diagnostic "timeout
stopping cpus".
Much more harming behaviour is that because all CPUs try to enter kdb,
and if ddb is used as debugger, all CPUs issue prompt on console and
race for the input, not to mention the simultaneous use of the ddb
shared state.
Try to fix this by introducing a pseudo-lock for simultaneous attempts
to handle NMIs. If one core happens to enter NMI trap handler, other
cores see it and simulate reception of the IPI_STOP_HARD. More,
generic_stop_cpus() avoids sending IPI_STOP_HARD and avoids waiting
for the acknowledgement, relying on the nmi handler on other cores
suspending and then restarting the CPU.
Since it is impossible to detect at runtime whether some stray NMI is
broadcast or unicast, add a knob for administrator (really developer)
to configure debugging NMI handling mode.
The updated patch was debugged with the help from Andrey Gapon (avg)
and discussed with him.
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D8249
native fueword64(9) still, use proper type for local where fuword64()
result is stored.
Note that fueword64() is unused in the tree.
Submitted by: Chunhui He <hchunhui@mail.ustc.edu.cn>
PR: 212520
MFC after: 1 week
In sendit(), if mp->msg_control is present, then in sockargs() we are
allocating mbuf to store mp->msg_control. Later in kern_sendit(), call
to getsock_cap(), will check validity of file pointer passed, if this
fails EBADF is returned but mbuf allocated in sockargs() is not freed.
Made code changes to free the same.
Since freeing control mbuf in sendit() after checking (control != NULL)
may lead to double freeing of control mbuf in sendit(), we can free
control mbuf in kern_sendit() if there are any errors in the routine.
Submitted by: Lohith Bellad <lohith.bellad@me.com>
Reviewed by: glebius
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D8152
If no negative entry is found on the last list, the ncp pointer will be
left uninitialized and a non-null value will make the function assume an
entry was found.
Fix the problem by initializing to NULL on entry.
Reported by: glebius
This splits the ncneg_mtx lock while preserving the hit ratio at least
during buildworld.
Create N dedicated lists for new negative entries.
Entries with at least one hit get promoted to the hot list, where they
get requeued every M hits.
Shrinking demotes one hot entry and performs a round-robin shrinking of
regular lists.
Reviewed by: kib
ref: 535865d02c
Fix cpu assignment by assuring stride is non-zero, assert that all tasks
have a valid taskqueue.
ref: db39817623
Start cpu assignment from zero.
ref: d99d39b6b6
Submitted by: mmacy@nextbsd.org
In r10905 and r10906 makesyscalls was modified to avoid emitting a
literal $Id$ string in the generated file, with:
gsub("[$]Id: ", "", $0)
gsub(" [$]", "", $0)
Then r11294 added some functionality and also tried to address the $Id$
problem in a different way, by removing every $:
sed -e 's/\$//g ...
This rendered the gsub infeffective. The gsub was later updated to
track the $Id$ -> $FreeBSD$ switch, even though it did not do anything.
Revert the addition of the s/\$//g, and update the gsub to keep the
resulting format the same.
Discussed with: bde
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
