Addr2line is not required for the build, and a per-arch binary is no
longer required with the switch to the ELF Tool Chain. However, building
these tools during the cross tools stage can be useful for developers
who cross build HEAD from stable/10, and adds very little to the build
time.
Reviewed by: ian, imp
Differential Revision: https://reviews.freebsd.org/D1583
To be able to info pages consider installing texinfo from ports print/texinfo or
via pkg: pkg install texinfo
Differential Revision: https://reviews.freebsd.org/D1409
Reviewed by: emaste, imp (previous version)
Relnotes: yes
Previously it also disabled building elftoolchain bootstrap tools such as
strip(1).
Differential Revision: https://reviews.freebsd.org/D1398
Reviewed by: imp
Sponsored by: The FreeBSD Foundation
ensure that building on a host without makeinfo (i.e. a host where
make delete-old -DWITHOUT_INFO was run), then building with MK_INFO == yes
doesn't manifest in build errors when building info pages
This manifested itself like the following when I was build testing an MFC
change on stable/10:
makeinfo --no-split -I /usr/src/gnu/lib/libregex/doc -I /usr/src/gnu/lib/libregex/doc regex.texi -o regex.info
makeinfo: not found
*** [regex.info] Error code 127
make[6]: stopped in /usr/src/gnu/lib/libregex/doc
1 error
Tested on a head VM without makeinfo installed and by building with MK_INFO=yes
MFC after: 1 week
The work in r258233 hardcoded the assumption that tests was the last component
of the tests tree by pushing tests as an explicit prefix for the paths in
BSD.tests.dist and /usr was the prefix for all tests, per BSD.usr.dist and all
of the mtree calls used in Makefile.inc1. This assumption breaks if/when one
provides a custom TESTSBASE "prefix", e.g. TESTSBASE=/mytests .
One thing that r258233 did properly though was remove "/usr/tests" creation
from BSD.usr.dist -- that should have not been there in the first place. That
was an "oops" on my part for the work that was originally committed in r241823
MFC after: 2 weeks
Phabric: D1301
Reviewed by: imp
Sponsored by: EMC / Isilon Storage Division
when strip gets replaced at install time by adding it to ITOOLS for the
default usr.bin/xinstall STRIP_CMD
This will fix the failure noted in this Jenkins build step:
https://jenkins.freebsd.org/job/Build-UFS-image/688/
This will also fix the issue reported by alfred@ dealing with installing on
targets that differ from build hosts (e.g. installing on i386/i386 when built
on amd64/amd64)
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
This will fix installation with differing host targets in installworld, so
one can build i386/i386 on an amd64 host, then install to an i386/i386 target
Reported by: alfred
Phabric: D1280
MFC after: 1 week
This will unbreak the build when "env MK_CXX=no make delete-old" has been run
on the build host post-r272849
Tested with the following commands:
/bin/sh
export __MAKE_CONF=/dev/null SRCCONF=/dev/null
export MK_CLANG=no MK_CLANG_BOOTSTRAP=no MK_GCC=yes MK_GCC_BOOTSTRAP=yes
export MK_GNUCXX=yes TARGET=armv6 TARGET_ARCH=arm make xdev
make toolchain
make xdev-build
sudo -E make xdev-install
/usr/armv6-freebsd/usr/bin/cc -dumpmachine | grep arm
X-MFC with: r272849
Reported by: Dan Raymond <draymond@foxvalley.net>, gjb
if/when MK_CXX == no and make delete-old has been run on the build host,
post-r272849
Tested with the following command:
% sudo env MK_CLANG=no MK_CLANG_BOOTSTRAP=no MK_GCC=yes MK_GCC_BOOTSTRAP=yes \
MK_GNUCXX=yes make xdev
Set WITH_ELFTOOLCHAIN_TOOLS in src.conf to use the elftoolchain version
of the following tools:
* addr2line
* elfcopy (strip / mcs)
* nm
* size
* strings
Reviewed by: bapt (earlier version)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D1224
comes after share in SUBDIR in Makefile.inc1, the build will fail when vi is not
installed on the build host
Run build-tools for usr.bin/vi and install ex, etc to WORLDTMP to enable building
share/termcap on hosts that don't have nvi installed on them
directories in LOCAL_LIB_DIRS if they are subdirectories of directories
listed in LOCAL_DIRS. This allows a hierarchy like:
foo
foo/lib
foo/usr.bin
foo/usr.sbin
to be supported with LOCAL_DIRS=foo LOCAL_DIRS=foo/lib.
MFC after: 1 week
Sponsored by: DARPA, AFRL
built before contrib dependency, dialog(3). Add dialog(3) to the list
of _prebuild_libs to ensure that this does not happen.
Tested on: 11.0-CURRENT amd64 @ r274205
Thanks to: kargl, Larry Rosenman <ler@lerctr.org>, ngie, markj
Recommended by: ngie
Reviewed by: ngie, markj
MFC after: 21 days
X-MFC-to: stable/10 stable/9
X-MFC-with: 274116 274120 274121 274123 274144 274146 274192 274203
Add to using _prebuild_libs in (top-level) Makefile.inc1.
NB: Unbreak build yet again (we'll get this right eventually)
Reviewed by: markj, ngie
Thanks to: ian, markj, ngie, Nikolai Lifanov <lifanov@mail.lifanov.com>
MFC after: 21 days
X-MFC-to: stable/10 stable/9
X-MFC-with: 274116 274120 274121 274123 274144 274146 274192
issue. lib/atf isn't a prereq_lib, since it isn't required for other
libraries to build. Remove it. The old kludge of always building it
had effectively been retired. Since we don't want to build the
libraries with the tests when we're bootstrapping, invent
MK_TESTS_SUPPORT which normally defaults to the current MK_TESTS
value, except when explicitly defined. Make lib/atf depend on it being
yes. When building the libraries set MK_TESTS to no, and
MK_TESTS_SUPPORT to the current value of MK_TESTS so that later stages
of the build work correctly. This should fix (and does for me)
people's issues with parallel builds racing between lib/atf and
libexec/atf. Since lib/atf is built during the libraries phase, the
race disappears.
Even if you were allowed to test for it, the test makes no sense as it
always results in adding -DWITH_ATF unless WITH_ATF was already
defined. But if MK_ATF != no, then we know it was defined. This, in
turn, caused tools/build/options/makemake always think WITH_ATF is the
default, which removed control of that from sys.conf.mk.
To get the intent of the deleted comment, another mechanism is
required, assuming that the intent of that comment is desirable.
and DEPFLAGS for mkdep flags
Pass the path to the libc++ headers in both, enforce the gnu++11 standard in the XXFLAGS
to satisfy libc++ requirements pass the libc++ objectdir as a location where to find
libraries so it can find libstdc++.so and libstdc++.A
Reviewed by: imp
The goal is to provide pre seeded toolchain configurations withing the ports tree
to allow the use of an external toolchain in a simple way:
make CROSS_TOOLCHAIN=powerpc64-gcc TARGET=powerpc TARGET_ARCH=powerpc64 buildworld
This will look for the external toolchain definition in /usr/local/share/mk/powerpc64-gcc.mk
While here add the notion of X_COMPILER_TYPE to the external toolchain framework to allow
to deal with differences between gcc and clang in regards of cross building
the oabi is still in the tree, but it is expected this will be removed
as developers work on surrounding code.
With this commit the ARM EABI is the only supported supported ABI by
FreeBSD on ARMa 32-bit processors.
X-MFC after: never
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D876
depend on the .MAKE special target
This will allow users to do something like the following to print out the
results of the running the simulated make target with bmake, like some of the
other top-level make targets in Makefile.inc1:
% make -f Makefile.inc1 -n distribution TARGET=i386 TARGET_ARCH=i386
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
This enables a common root directory for all object files for a given tree,
which eases sharing a common MAKEOBJDIRPREFIX, and cleaning up of object trees.
In particular, one can simply (from the source directory) rm -rf /usr/obj$(pwd)
to destroy all object files for it. Or to copy/sync files, etc.
Reviewed by: bdrewery
CR: https://reviews.freebsd.org/D796
MFC after: 1 month
Sponsored by: Spectra Logic
1. 50+% of NO_PIE use is fixed by adding -fPIC to INTERNALLIB and other
build-only utility libraries.
2. Another 40% is fixed by generating _pic.a variants of various libraries.
3. Some of the NO_PIE use is a bit absurd as it is disabling PIE (and ASLR)
where it never would work anyhow, such as csu or loader. This suggests
there may be better ways of adding support to the tree. Many of these
cases can be fixed such that -fPIE will work but there is really no
reason to have it in those cases.
4. Some of the uses are working around hacks done to some Makefiles that are
really building libraries but have been using bsd.prog.mk because the code
is cleaner. Had they been using bsd.lib.mk then NO_PIE would not have
been needed.
We likely do want to enable PIE by default (opt-out) for non-tree consumers
(such as ports). For in-tree though we probably want to only enable PIE
(opt-in) for common attack targets such as remote service daemons and setuid
utilities. This is also a great performance compromise since ASLR is expected
to reduce performance. As such it does not make sense to enable it in all
utilities such as ls(1) that have little benefit to having it enabled.
Reported by: kib
building toolchain for the host computer. This toolchain produces
TARGET_ARCH and assumes the rest of the system contains libraries for
the target. It is intended to be used in a "qemu-user jail" where all
the binaries would otherwise be the target architecture's to build
ports. However, emulation of the compilers is too slow, so we build
native binaries for that. Rather than use the xdev produced binaries,
with all their weird links and paths, these binaries use the native
paths. They will not work unless installed into the qemu-user jail.
Differential Revision: https://phabric.freebsd.org/D518
Reviewed by: sbruno@
Makefile.inc1:
Always compile gensnmptree with bootstrap-tools when MK_BSNMP != no
instead of depending on a potentially stale tool installed on the build host
sbin/atm/atmconfig/Makefile:
- Always remove oid.h to avoid cluttering up the build/src tree.
- Consolidate all of the RESCUE/MK_BSNMP != no logic under one
conditional to improve readability
- Remove unnecessary ${.OBJDIR} prefixing for oid.h and use ${.TARGET} instead
of spelling out oid.h
- Add a missing DPADD for ${LIBCRYPTO} when compiled MK_BSNMP == yes and
MK_OPENSSL == yes and not compiling for /rescue/rescue
sbin/atm/atmconfig/main.c:
Change #ifndef RESCUE to #ifdef WITH_BSNMP in main.c to make it
clear that we're compiling bsnmp support into atmconfig
Approved by: jmmv (mentor)
Phabric: D579
PR: 143830
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
