7.x, 8.x and 9.x with pf(4) imports: pfsync(4) should suppress CARP
preemption, while it is running its bulk update.
However, reimplement the feature in more elegant manner, that is
partially inspired by newer OpenBSD:
- Rename term "suppression" to "demotion", to match with OpenBSD.
- Keep a global demotion factor, that can be raised by several
conditions, for now these are:
- interface goes down
- carp(4) has problems with ip_output() or ip6_output()
- pfsync performs bulk update
- Unlike in OpenBSD the demotion factor isn't a counter, but
is actual value added to advskew. The adjustment values for
particular error conditions are also configurable, and their
defaults are maximum advskew value, so a single failure bumps
demotion to maximum. This is for POLA compatibility, and should
satisfy most users.
- Demotion factor is a writable sysctl, so user can do
foot shooting, if he desires to.
from scratch, copying needed functionality from the old implemenation
on demand, with a thorough review of all code. The main change is that
interface layer has been removed from the CARP. Now redundant addresses
are configured exactly on the interfaces, they run on.
The CARP configuration itself is, as before, configured and read via
SIOCSVH/SIOCGVH ioctls. A new prefix created with SIOCAIFADDR or
SIOCAIFADDR_IN6 may now be configured to a particular virtual host id,
which makes the prefix redundant.
ifconfig(8) semantics has been changed too: now one doesn't need
to clone carpXX interface, he/she should directly configure a vhid
on a Ethernet interface.
To supply vhid data from the kernel to an application the getifaddrs(8)
function had been changed to pass ifam_data with each address. [1]
The new implementation definitely closes all PRs related to carp(4)
being an interface, and may close several others. It also allows
to run a single redundant IP per interface.
Big thanks to Bjoern Zeeb for his help with inet6 part of patch, for
idea on using ifam_data and for several rounds of reviewing!
PR: kern/117000, kern/126945, kern/126714, kern/120130, kern/117448
Reviewed by: bz
Submitted by: bz [1]
Fix a bug where the parameter length of a supported address types
parameter is set to a wrong value if the kernel is built with
with either INET or INET6, but not both.
MFC after: 3 days.
backup stack queue entry when the zone is exhausted, otherwise we leak a zone
allocation each time we plug a hole in the reassembly queue.
Reported by: many on freebsd-stable@ (thread: "TCP Reassembly Issues")
Tested by: many on freebsd-stable@ (thread: "TCP Reassembly Issues")
Reviewed by: bz (very brief sanity check)
MFC after: 3 days
structs ifreq/in_aliasreq and there've been several panics due
to that problem. All these panics were fixed just a couple of
lines above the panicing code.
Take a more general approach: sanity check sockaddrs supplied
with SIOCAIFADDR and SIOCSIF*ADDR at the beggining of the
function and drop all checks below.
One check is now disabled due to strange code in ifconfig(8)
that I've removed recently. I'm going to enable it with next
__FreeBSD_version bump.
Historically in_ifinit() was able to recover from an error
and restore old address. Nowadays this feature isn't working
for all error cases, but for some of them. I suppose no software
relies on this behavior, so I'd like to remove it, since this
simplifies code a lot.
Also, move if_scrub() earlier in the in_ifinit(). It is more
correct to wipe routes before removing address from local
address list, and interface address list.
Silence from: bz, brooks, andre, rwatson, 3 weeks
machine to LOG_NOTICE. Exception left to "using my IP address".
- Fix multicast ARP warning: add newline and also log the bad MAC address.
Tested by: Alexander Wittig <wittigal msu.edu>
if_alloctype was used to store the origional interface type. Take
advantage of this change by removing all existing uses of if_free_type()
in favor of if_free().
MFC after: 1 Month
- fix other errors introduced when committing r226436
- add 'function' to a sentence where it makes sense
Submitted by: delphij
Submitted by: dougb
Submitted by: jhb
Approved by: dougb
Approved by: jhb
The SYSCTL_NODE macro defines a list that stores all child-elements of
that node. If there's no SYSCTL_DECL macro anywhere else, there's no
reason why it shouldn't be static.
inp_socket->so_options dereference when we may not acquire the lock on
the inpcb.
This fixes the crash due to NULL pointer dereference in
in_pcbbind_setup() when inp_socket->so_options in a pcb returned by
in_pcblookup_local() was checked.
Reported by: dave jones <s.dave.jones@gmail.com>, Arnaud Lacombe <lacombar@gmail.com>
Suggested by: rwatson
Glanced by: rwatson
Tested by: dave jones <s.dave.jones@gmail.com>
compiled into the kernel.
Do not try to build the module in case of no INET support but
keep #error calls for now in case we would compile it into the
kernel.
This should fix an issue where the module would fail to enable
IPv6 support from the rc framework, but also other INET and INET6
parts being silently compiled out without giving a warning in the
module case.
While here garbage collect unneeded opt_*.h includes.
opt_ipdn.h is not used anywhere but we need to leave the DUMMYNET
entry in options for conditional inclusion in kernel so keep the
file with the same name.
Reported by: pluknet
Reviewed by: plunket, jhb
MFC After: 3 days
They seem to be changed unintentionally in r226437, and there were no
any mentions of renaming in commit log message.
Reported by: Anton Yuzhaninov <citrin citrin ru>
interfaces. A host route has a NULL mask so check for that condition.
I have also been told by developers who customize the packet output
path with direct manipulation of the route entry (or the outgoing
interface to be specific). This patch checks for the route mask
explicitly to make sure custom code will not panic.
PR: kern/161805
MFC after: 3 days
According to POSIX, these two header files should be able to be included
by themselves, not depending on other headers. The <net/if.h> header
uses struct sockaddr when __BSD_VISIBLE=1, while <netinet/tcp.h> uses
integer datatypes (u_int32_t, u_short, etc).
MFC after: 2 months
long been superseded by the RFC3390 initial CWND sizing.
Also remove the remnants of TCP_METRICS_CWND which used the
TCP hostcache to set the initial CWND in a non-RFC compliant
way.
MFC after: 1 week
This fixes a compiler warning at WARNS=6 when including the header files
as follows:
#include <sys/types.h>
#include <netinet/in.h>
#include <netinet/ip_var.h>
#include <netinet/udp.h>
#include <netinet/udp_var.h>
To run a /31 network, participating hosts MUST drop support
for directed broadcasts, and treat the first and last addresses
on subnet as unicast. The broadcast address for the prefix
should be the link local broadcast address, INADDR_BROADCAST.
- Remove ia_net, ia_netmask, ia_netbroadcast from struct in_ifaddr.
- Remove net.inet.ip.subnetsarelocal, I bet no one need it in 2011.
- fix bug when we were not forwarding to a host which matches classful
net address. For example router having 192.168.x.y/16 network attached,
would not forward traffic to 192.168.*.0, which are legal IPs in
CIDR world.
- For compatibility, leave autoguessing of mask based on class.
Reviewed by: andre, bz, rwatson
significant ones.
This has changed in the latest version of the socket API ID and
provides backwards compatibility and gets it in syn with the
usage of the IP_TOS socket option.
MFC after: 3 days.
route where the destination IP and the gateway IP is the same. This
special case handling is only meant for backward compatibility reason.
The last commit introduced a bug in the route check logic, where a
valid special case is treated as an error. This patch fixes that bug
along with some code cleanup.
Suggested by: gleb
Reviewed by: kmacy, discussed with gleb
MFC after: 1 day
struct route was changed in
http://svn.freebsd.org/changeset/base/225698
and since then SCTP support was broken.
This needs to be MFCed to stable/9 to unbreak SCTP support in 9.0
MFC after: 3 days.
address if that interface does not support ARP. Otherwise the
system will generate error messages unnecessarily due to the missing
entry.
PR: kern/159602
Submitted by: pluknet
MFC after: 3 days
address is being deleted. Only the last reference holder deletes the
loopback route. All other delete operations just clear the IFA_RTSELF
flag.
PR: kern/159601
Submitted by: pluknet
Reviewed by: discussed on net@
MFC after: 3 days
when reaching the zone limit of reassembly queue entries.
When the zone limit was reached not even the missing segment
that would complete the sequence space could be processed
preventing the TCP session forever from making any further
progress.
Solve this deadlock by using a temporary on-stack queue entry
for the missing segment followed by an immediate dequeue again
by delivering the contiguous sequence space to the socket.
Add logging under net.inet.tcp.log_debug for reassembly queue
issues.
Reviewed by: lsteward (previous version)
Tested by: Steven Hartland <killing-at-multiplay.co.uk>
MFC after: 3 days
raw IP sockets. It was deducted in ip_input() in preparation for
protocols interested only in the payload.
On raw sockets the IP header should be delivered as it at came in
from the network except for the byte order swaps in some fields.
This brings us in line with all other OS'es that provide raw
IP sockets.
Reported by: Matthew Cini Sarreo <mcins1-at-gmail.com>
MFC after: 3 days
inpcb object.
Skip the TCP_SIGNATURE check in that case as it is consistent with the
output path (no TCP_SIGNATURE for outcoming packets in TIMEWAIT state)
and also because for TIMEWAIT state the verify may be less effective.
Sponsored by: Sandvine Incorporated
Reported by: rwatson
No objections by: rwatson
MFC after: 3 days
same prefix. Since a single route entry is installed for the prefix
(without RADIX_MPATH), incoming packets on the interfaces that are not
associated with the prefix route may trigger an error message about
unable to allocation LLE entry, and fails L2. This patch makes sure a
valid route is present in the system, and allow the aforementioned
condition to exist and treats as valid.
Reviewed by: bz
MFC after: 5 days
build the ip_fw_pfil.c hooks and ipfw even in case of no-ip under the
assumption that the private L2 hook (which hopefully eventually will be a
pfil hook as well) can still be useful.
Allow building the module without inet as well.
Glanced at by: jhb
MFC after: 3 days
options defined in the kernel config. This more closely matches the
behavior of other modules which inherit configuration settings from the
kernel configuration during a kernel + modules build.
Reviewed by: luigi
Approved by: re (kib)
MFC after: 1 week
route with the same prefix is searched for as a replacement. The
current code did not bypass routes that have non-operational
interfaces. This patch fixes that bug and will find a replacement
route with an active interface.
PR: kern/159603
Submitted by: pluknet, ambrisko at ambrisko dot com
Reviewed by: discussed on net@
Approved by: re (bz)
MFC after: 3 days
and the maximum TCP send and receive buffer limits from 256kB
to 2MB.
For sb_max_adj we need to add the cast as already used in the sysctl
handler to not overflow the type doing the maths.
Note that this is just the defaults. They will allow more memory
to be consumed per socket/connection if needed but not change the
default "idle" memory consumption. All values are still tunable
by sysctls.
Suggested by: gnn
Discussed on: arch (Mar and Aug 2011)
MFC after: 3 weeks
Approved by: re (kib)
Distinguish IPv4 and IPv6 addresses and optional port numbers in
user space to set the option for the correct protocol family.
Add support in the kernel for carrying the new IPv6 destination
address and port.
Add support to TCP and UDP for IPv6 and fix UDP IPv4 to not change
the address in the IP header.
Add support for IPv6 forwarding to a non-local destination.
Add a regession test uitilizing VIMAGE to check all 20 possible
combinations I could think of.
Obtained from: David Dolson at Sandvine Incorporated
(original version for ipfw fwd IPv6 support)
Sponsored by: Sandvine Incorporated
PR: bin/117214
MFC after: 4 weeks
Approved by: re (kib)
more fragments flag off so that offset == 0 checks work properly.
PR: kern/145733
Submitted by: Matthew Luckie (mjl luckie.org.nz)
MFC after: 2 weeks
X-MFC with: r225032
Approved by: re (kib)
then terminate the loop as we will not find any further headers and
for short fragments this could otherwise lead to a pullup error
discarding the fragment.
PR: kern/145733
Submitted by: Matthew Luckie (mjl luckie.org.nz)
MFC after: 2 weeks
Approved by: re (kib)
packet is a/the first fragment or not. For IPv6 we have added the
"more fragments" flag as well to be able to determine on whether
there will be more as we do not have the fragment header avaialble
for logging, while for IPv4 this information can be derived directly
from the IPv4 header. This allowed fragmented packets to bypass
normal rules as proper masking was not done when checking offset.
Split variables to not need masking for IPv6 to avoid further errors.
PR: kern/145733
Submitted by: Matthew Luckie (mjl luckie.org.nz)
MFC after: 2 weeks
Approved by: re (kib)
translation technology involved (and that section is suggested to
be removed by Errata 2843), single packet fragments do not harm.
There is another errata under discussion to clarify and allow this.
Meanwhile add a sysctl to allow disabling this behaviour again.
We will treat single packet fragment (a fragment header added
when not needed) as if there was no fragment header.
PR: kern/145733
Submitted by: Matthew Luckie (mjl luckie.org.nz) (original version)
Tested by: Matthew Luckie (mjl luckie.org.nz)
MFC after: 2 weeks
Approved by: re (kib)
While there:
* Fix a locking issue in setsockopt() of SCTP_CMT_ON_OFF.
* Fix a bug in setsockopt() of SCTP_DEFAULT_PRINFO, where the pr_value
was ignored.
Approved by: re@
MFC after: 2 months.
* Decouple the path supervision using a separate HB timer per path.
* Add support for potentially failed state.
* Bring back RTO.min to 1 second.
* Accept packets on IP-addresses already announced via an ASCONF
* While there: do some cleanups.
Approved by: re@
MFC after: 2 months.
- TCP keep* timers
- TCP UTO (adjust from what was there already)
- netmap
- route caching
- user cookie (temporary to allow for the real fix)
Slightly re-shuffle struct ifnet moving fields out of the middle
of spares and to better align.
Discussed with: rwatson (slightly earlier version)
same as the host address. This already works fine for INET6 and ND6.
While here, remove two function pointers from struct lltable which are
only initialized but never used.
MFC after: 3 days
I think the benefit of making the code cleaner and easier to understand
outweighs the humour of leaving this intact (or possibly changing it to
#ifdef not_yet_and_probably_never).
MFC after: 2 weeks
when len is inserted back into the synthetic IP packet and cause a
multiple of 2^16 bytes of TCP "packet loss".
This improves Linux->FreeBSD netperf bandwidth by a factor of 300 in
testing on Amazon EC2.
Reviewed by: jfv
MFC after: 2 weeks
- While here, remove a paragraph about userspace operation that
has been outdated for some time. [2]
PR: 158623
Submitted by: Ben Kudak (kaduk % mit!edu) [1]
Reviewed by: glebius [2]
MFC after: 1 week
This makes pf find the wrong state and cause errors reported with state mismatches.
Clear the cached state link on the pf(4) tag to avoid the state mismatches.
Approved by: bz
reset rcvif to NULL. Since rcvif is not NULL, ipfw(4) supposes that ARP
replies were received on specified interface.
Reset rcvif to NULL for ARP replies to fix this issue.
PR: kern/131817
Reviewed by: glebius
MFC after: 1 month
possible to organize subroutines with rules.
The "call" action saves the current rule number in the internal
stack and rules processing continues from the first rule with
specified number (similar to skipto action). If later a rule with
"return" action is encountered, the processing returns to the first
rule with number of "call" rule saved in the stack plus one or higher.
Submitted by: Vadim Goncharov
Discussed by: ipfw@, luigi@
alias address needs to be specified.
Add inbound handler to the alias_ftp module. It helps handle active
FTP transfer mode for the case with external clients and FTP server behind
NAT. Fix passive FTP transfer case for server behind NAT using redirect with
external IP address different from NAT ip address.
PR: kern/157957
Submitted by: Alexander V. Chernikov
IPsec being compiled in and used. Improve reporting by adding the length
fields to the panic message, so that we would have some immediate debugging
hints.
Discussed with: jhb
"globalport" option for multiple NAT instances.
If ipfw rule contains "global" keyword instead of nat_number, then
for each outgoing packet ipfw_nat looks up translation state in all
configured nat instances. If an entry is found, packet aliased
according to that entry, otherwise packet is passed unchanged.
User can specify "skip_global" option in NAT configuration to exclude
an instance from the lookup in global mode.
PR: kern/157867
Submitted by: Alexander V. Chernikov (previous version)
Tested by: Eugene Grosbein
to the check_uidgid() function, since it contains all needed arguments
and also pointer to mbuf and now it is possible use in_pcblookup_mbuf()
function.
Since i can not test it for the non-FreeBSD case, i keep this ifdef
unchanged.
Tested by: Alexander V. Chernikov
MFC after: 3 weeks
(rcv_nxt) if we advertising a zero window. This can be true when ACK'ing
a window probe whose one byte payload was accepted rather than dropped
because the socket's receive buffer was not completely full, but the
remaining space was smaller than the window scale.
This ensures that window probe ACKs satisfy the assumption made in r221346
and closes a window where rcv_nxt could be greater than rcv_adv.
Tested by: trasz, pho, trociny
Reviewed by: silby
MFC after: 1 week
how natd(8) does work. natd(8) drops packets only when libalias returns
PKT_ALIAS_IGNORED and "deny_incoming" option is set, but ipfw_nat
always did drop packets that were not aliased, even if they should
not be aliased and just are going through.
PR: kern/122109, kern/129093, kern/157379
Submitted by: Alexander V. Chernikov (previous version)
MFC after: 1 month
Rather than including lock.h in in_pcbgroup.c in right order, fix it
for all consumers of in_pcb.h by further header file pollution under
#ifdef KERNEL.
Reported by: Pan Tsu (inyaoo gmail.com)
struct inpcbgroup. pcbgroups, or "connection groups", supplement the
existing inpcbinfo connection hash table, which when pcbgroups are
enabled, might now be thought of more usefully as a per-protocol
4-tuple reservation table.
Connections are assigned to connection groups base on a hash of their
4-tuple; wildcard sockets require special handling, and are members
of all connection groups. During a connection lookup, a
per-connection group lock is employed rather than the global pcbinfo
lock. By aligning connection groups with input path processing,
connection groups take on an effective CPU affinity, especially when
aligned with RSS work placement (see a forthcoming commit for
details). This eliminates cache line migration associated with
global, protocol-layer data structures in steady state TCP and UDP
processing (with the exception of protocol-layer statistics; further
commit to follow).
Elements of this approach were inspired by Willman, Rixner, and Cox's
2006 USENIX paper, "An Evaluation of Network Stack Parallelization
Strategies in Modern Operating Systems". However, there are also
significant differences: we maintain the inpcb lock, rather than using
the connection group lock for per-connection state.
Likewise, the focus of this implementation is alignment with NIC
packet distribution strategies such as RSS, rather than pure software
strategies. Despite that focus, software distribution is supported
through the parallel netisr implementation, and works well in
configurations where the number of hardware threads is greater than
the number of NIC input queues, such as in the RMI XLR threaded MIPS
architecture.
Another important difference is the continued maintenance of existing
hash tables as "reservation tables" -- these are useful both to
distinguish the resource allocation aspect of protocol name management
and the more common-case lookup aspect. In configurations where
connection tables are aligned with hardware hashes, it is desirable to
use the traditional lookup tables for loopback or encapsulated traffic
rather than take the expense of hardware hashes that are hard to
implement efficiently in software (such as RSS Toeplitz).
Connection group support is enabled by compiling "options PCBGROUP"
into your kernel configuration; for the time being, this is an
experimental feature, and hence is not enabled by default.
Subject to the limited MFCability of change dependencies in inpcb,
and its change to the inpcbinfo init function signature, this change
in principle could be merged to FreeBSD 8.x.
Reviewed by: bz
Sponsored by: Juniper Networks, Inc.
Options for DNS Configuration) into rtadvd(8) and rtsold(8). DNS
information received by rtsold(8) will go to resolv.conf(5) by
resolvconf(8) script. This is based on work by J.R. Oldroyd (kern/156259)
but revised extensively[1].
- rtadvd(8) now supports "noifprefix" to disable gathering on-link prefixes
from interfaces when no "addr" is specified[2]. An entry in rtadvd.conf
with "noifprefix" + no "addr" generates an RA message with no prefix
information option.
- rtadvd(8) now supports RTM_IFANNOUNCE message to fix crashes when an
interface is added or removed.
- Correct bogus ND_OPT_ROUTE_INFO value to one in RFC 4191.
Reviewed by: bz[1]
PR: kern/156259 [1]
PR: bin/152458 [2]
hash install, etc. For now, these are arguments are unused, but as we add
RSS support, we will want to use hashes extracted from mbufs, rather than
manually calculated hashes of header fields, due to the expensive of the
software version of Toeplitz (and similar hashes).
Add notes that it would be nice to be able to pass mbufs into lookup
routines in pf(4), optimising firewall lookup in the same way, but the
code structure there doesn't facilitate that currently.
(In principle there is no reason this couldn't be MFCed -- the change
extends rather than modifies the KBI. However, it won't be useful without
other previous possibly less MFCable changes.)
Reviewed by: bz
Sponsored by: Juniper Networks, Inc.
for lookup. I missed its call to in_pcbbind() when preparing previous
patches, which would lead to a lock assertion failure (although problem
not an actual race condition due to global pcbinfo locks providing
required synchronisation -- in this particular case only). This change
adds the missing locking of the pcbhash lock.
(Existing comments in the ipdivert code question the need for using the
global hash to manage the namespace, as really it's a simple port
namespace and not an address/port namespace. Also, although in_pcbbind
is used to manage reservations, the hash tables aren't used for lookup.
It might be a good idea to make them use hashed lookup, or to use a
different reservation scheme.)
Reviewed by: bz
Reported by: Kristof Provost <kristof at sigsegv.be>
Sponsored by: Juniper Networks
dynamic rules. We are doing forwarding in the following cases:
o For the simple ipfw fwd rule, e.g.
fwd 10.0.0.1 ip from any to any out xmit em0
fwd 127.0.0.1,3128 tcp from any to any 80 in recv em1
o For the dynamic fwd rule, e.g.
fwd 192.168.0.1 tcp from any to 10.0.0.3 3333 setup keep-state
When this rule triggers it creates a dynamic rule, but this
dynamic rule should forward packets only in forward direction.
o And the last case that does not work before - simple fwd rule which
triggers when some dynamic rule is already executed.
PR: kern/147720, kern/150798
MFC after: 1 month
- The existing ipi_lock continues to protect the global inpcb list and
inpcb counter. This lock is now relegated to a small number of
allocation and free operations, and occasional operations that walk
all connections (including, awkwardly, certain UDP multicast receive
operations -- something to revisit).
- A new ipi_hash_lock protects the two inpcbinfo hash tables for
looking up connections and bound sockets, manipulated using new
INP_HASH_*() macros. This lock, combined with inpcb locks, protects
the 4-tuple address space.
Unlike the current ipi_lock, ipi_hash_lock follows the individual inpcb
connection locks, so may be acquired while manipulating a connection on
which a lock is already held, avoiding the need to acquire the inpcbinfo
lock preemptively when a binding change might later be required. As a
result, however, lookup operations necessarily go through a reference
acquire while holding the lookup lock, later acquiring an inpcb lock --
if required.
A new function in_pcblookup() looks up connections, and accepts flags
indicating how to return the inpcb. Due to lock order changes, callers
no longer need acquire locks before performing a lookup: the lookup
routine will acquire the ipi_hash_lock as needed. In the future, it will
also be able to use alternative lookup and locking strategies
transparently to callers, such as pcbgroup lookup. New lookup flags are,
supplementing the existing INPLOOKUP_WILDCARD flag:
INPLOOKUP_RLOCKPCB - Acquire a read lock on the returned inpcb
INPLOOKUP_WLOCKPCB - Acquire a write lock on the returned inpcb
Callers must pass exactly one of these flags (for the time being).
Some notes:
- All protocols are updated to work within the new regime; especially,
TCP, UDPv4, and UDPv6. pcbinfo ipi_lock acquisitions are largely
eliminated, and global hash lock hold times are dramatically reduced
compared to previous locking.
- The TCP syncache still relies on the pcbinfo lock, something that we
may want to revisit.
- Support for reverting to the FreeBSD 7.x locking strategy in TCP input
is no longer available -- hash lookup locks are now held only very
briefly during inpcb lookup, rather than for potentially extended
periods. However, the pcbinfo ipi_lock will still be acquired if a
connection state might change such that a connection is added or
removed.
- Raw IP sockets continue to use the pcbinfo ipi_lock for protection,
due to maintaining their own hash tables.
- The interface in6_pcblookup_hash_locked() is maintained, which allows
callers to acquire hash locks and perform one or more lookups atomically
with 4-tuple allocation: this is required only for TCPv6, as there is no
in6_pcbconnect_setup(), which there should be.
- UDPv6 locking remains significantly more conservative than UDPv4
locking, which relates to source address selection. This needs
attention, as it likely significantly reduces parallelism in this code
for multithreaded socket use (such as in BIND).
- In the UDPv4 and UDPv6 multicast cases, we need to revisit locking
somewhat, as they relied on ipi_lock to stablise 4-tuple matches, which
is no longer sufficient. A second check once the inpcb lock is held
should do the trick, keeping the general case from requiring the inpcb
lock for every inpcb visited.
- This work reminds us that we need to revisit locking of the v4/v6 flags,
which may be accessed lock-free both before and after this change.
- Right now, a single lock name is used for the pcbhash lock -- this is
undesirable, and probably another argument is required to take care of
this (or a char array name field in the pcbinfo?).
This is not an MFC candidate for 8.x due to its impact on lookup and
locking semantics. It's possible some of these issues could be worked
around with compatibility wrappers, if necessary.
Reviewed by: bz
Sponsored by: Juniper Networks, Inc.
address so that proper clean up will take place in the routing code.
This patch fixes the bootp panic on startup problem. Also, added more
error handling and logging code in function in_scrubprefix().
MFC after: 5 days
feature_present(3) to dynamically decide whether to use one or the
other family.
Reviewed by: gnn
Sponsored by: The FreeBSD Foundation
Sponsored by: iXsystems
MFC after: 10 days
reworking of inpcbinfo locking:
(1) Convert inpcb reference counting from manually manipulated integers to
the refcount(9) KPI. This allows the refcount to be managed atomically
with an inpcb read lock rather than write lock, or even with no inpcb
lock at all. As a result, in_pcbref() also no longer requires an inpcb
lock, so can be performed solely using the lock used to look up an
inpcb.
(2) Shift more inpcb freeing activity from the in_pcbrele() context (via
in_pcbfree_internal) to the explicit in_pcbfree() context. This means
that the inpcb refcount is increasingly used only to maintain memory
stability, not actually defer the clean up of inpcb protocol parts.
This is desirable as many of those protocol parts required the pcbinfo
lock, which we'd like not to acquire in in_pcbrele() contexts. Document
this in comments better.
(3) Introduce new read-locked and write-locked in_pcbrele() variations,
in_pcbrele_rlocked() and in_pcbrele_wlocked(), which allow the inpcb to
be properly unlocked as needed. in_pcbrele() is a wrapper around the
latter, and should probably go away at some point. This makes it
easier to use this weak reference model when holding only a read lock,
as will happen in the future.
This may well be safe to MFC, but some more KBI analysis is required.
Reviewed by: bz
MFC after: 3 weeks
Sponsored by: Juniper Networks, Inc.
in_pcb_lport(), in_pcblookup_local(), and in_pcblookup_hash(), and similarly
for IPv6 functions. In the future, we would like to support other flags
relating to locking strategy.
This change doesn't appear to modify the KBI in practice, as callers already
passed in INPLOOKUP_WILDCARD rather than a simple boolean.
MFC after: 3 weeks
Reviewed by: bz
Sponsored by: Juniper Networks, Inc.
(1) Add a locking guide for inpcbinfo.
(2) Annotate inpcbinfo fields with synchronisation information; not all
annotations are 100% satisfactory.
(3) Reorder inpcbinfo fields so that the lock is at the head of the
structure, and close to fields it protects.
(4) Sort fields that will eventually be hashlock/pcbgroup-related together
even though they remain locked by ipi_lock for now.
Reviewed by: bz
Sponsored by: Juniper Networks
X-MFC after: KBI analysis required
interface is brought down, even though the interface address is still
valid. This patch maintains the permanent ARP entries as long as the
interface address (having the same prefix as that of the ARP entries)
is valid.
Reviewed by: delphij
MFC after: 5 days
when sending INITs to a global IPv4 address having
only private IPv4 address.
Allow the usage of a private address and make sure
that no other private address will be used by the
association.
Initial work was done by rrs@.
MFC after: 1 week.
keep constant ISN growth rate, do the same directly inside tcp_new_isn(),
taking into account how much time (ticks) passed since the last call.
On my test systems this decreases idle interrupt rate from 140Hz to 70Hz.
buffer fills up causing the remote sender to enter into persist mode, but
there is still room available in the receive buffer when a window probe
arrives (either due to window scaling, or due to the local application
very slowing draining data from the receive buffer), then the single byte
of data in the window probe is accepted. However, this can cause rcv_nxt
to be greater than rcv_adv. This condition will only last until the next
ACK packet is pushed out via tcp_output(), and since the previous ACK
advertised a zero window, the ACK should be pushed out while the TCP
pcb is write-locked.
During the window while rcv_nxt is greather than rcv_adv, a few places
would compute the remaining receive window via rcv_adv - rcv_nxt.
However, this value was then (uint32_t)-1. On a 64 bit machine this
could expand to a positive 2^32 - 1 when cast to a long. In particular,
when calculating the receive window in tcp_output(), the result would be
that the receive window was computed as 2^32 - 1 resulting in advertising
a far larger window to the remote peer than actually existed.
Fix various places that compute the remaining receive window to either
assert that it is not negative (i.e. rcv_nxt <= rcv_adv), or treat the
window as full if rcv_nxt is greather than rcv_adv.
Reviewed by: bz
MFC after: 1 month
Add some comments at #endifs given more nestedness. To make the compiler
happy, some default initializations were added in accordance with the style
on the files.
Reviewed by: gnn
Sponsored by: The FreeBSD Foundation
Sponsored by: iXsystems
MFC after: 4 days
Some bugs where fixed while doing this:
* ASCONF-ACK messages might use wrong port number when using
IPv6.
* Checking for additional addresses takes the correct address
into account and also does not do more comparisons than
necessary.
This patch is based on one received from bz@ who was
sponsored by The FreeBSD Foundation and iXsystems.
MFC after: 1 week
as well compiling out most functions adding or extending #ifdef INET
coverage.
Reviewed by: gnn
Sponsored by: The FreeBSD Foundation
Sponsored by: iXsystems
MFC after: 4 days
persist state and the retransmit timer. However, the code that implements
"bad retransmit recovery" only checks t_rxtshift to see if an ACK has been
received in during the first retransmit timeout window. As a result, if
ticks has wrapped over to a negative value and a socket is in the persist
state, it can incorrectly treat an ACK from the remote peer as a
"bad retransmit recovery" and restore saved values such as snd_ssthresh and
snd_cwnd. However, if the socket has never had a retransmit timeout, then
these saved values will be zero, so snd_ssthresh and snd_cwnd will be set
to 0.
If the socket is in fast recovery (this can be caused by excessive
duplicate ACKs such as those fixed by 220794), then each ACK that arrives
triggers either NewReno or SACK partial ACK handling which clamps snd_cwnd
to be no larger than snd_ssthresh. In effect, the socket's send window
is permamently stuck at 0 even though the remote peer is advertising a
much larger window and pending data is only sent via TCP window probes
(so one byte every few seconds).
Fix this by adding a new TCP pcb flag (TF_PREVVALID) that indicates that
the various snd_*_prev fields in the pcb are valid and only perform
"bad retransmit recovery" if this flag is set in the pcb. The flag is set
on the first retransmit timeout that occurs and is cleared on subsequent
retransmit timeouts or when entering the persist state.
Reviewed by: bz
MFC after: 2 weeks
Expose ip_icmp.c to INET6 as well and only export badport_bandlim()
along with the two sysctls in the non-INET case.
The bandlim types work for all cases I reviewed in IPv6 as well and
the sysctls are available as we export net.inet.* from in_proto.c.
Reviewed by: gnn
Sponsored by: The FreeBSD Foundation
Sponsored by: iXsystems
MFC after: 4 days
Move ip_defttl to raw_ip.c where it is actually used. In an IPv6
only world we do not want to compile ip_input.c in for that and
it is a shared default with INET6.
Reviewed by: gnn
Sponsored by: The FreeBSD Foundation
Sponsored by: iXsystems
MFC after: 4 days
adding appropriate #ifdefs. For module builds the framework needs
adjustments for at least carp.
Reviewed by: gnn
Sponsored by: The FreeBSD Foundation
Sponsored by: iXsystems
MFC after: 4 days
As long as this is a costy function, even when compiled in (along with
the option TCP_SIGNATURE), it can be disabled via the
net.inet.tcp.signature_verify_input sysctl.
Sponsored by: Sandvine Incorporated
Reviewed by: emaste, bz
MFC after: 2 weeks
INET or INET6 as it holds all the IPPROTO_* definitions needed
for the SYSCTL_NODE definitions.
Reviewed by: gnn
Sponsored by: The FreeBSD Foundation
Sponsored by: iXsystems
MFC after: 5 days
When compiling out INET we still need the initialization routines
as well as the tuning and montoring sysctls shared with IPv6.
Move the two send/recvspace variables up from the middle of the
file to ease compiling out the INET only code.
Reviewed by: gnn
Sponsored by: The FreeBSD Foundation
Sponsored by: iXsystems
MFC after: 3 days
Move the ipport_tick_callout and related functions from ip_input.c
to in_pcb.c. The random source port allocation code has been merged
and is now local to in_pcb.c only.
Use a SYSINIT to get the callout started and no longer depend on
initialization from the inet code, which would not work in an IPv6
only setup.
Reviewed by: gnn
Sponsored by: The FreeBSD Foundation
Sponsored by: iXsystems
MFC after: 4 days
Move fw_one_pass to where it belongs: it is a property of ipfw,
not of ip_input.
Reviewed by: gnn
Sponsored by: The FreeBSD Foundation
Sponsored by: iXsystems
MFC after: 3 days
calculate required memory size dynamically.
- Fix races on chain re-lock.
- Introduce new field to ip_fw_chain - generation count. Now utilized
only in the NAT configuration, but can be utilized wider in ipfw.
- Get rid of NAT_BUF_LEN in ip_fw.h
PR: kern/143653
specified minimum and maximum. In case when specified default value
is out of bounds it does not work as expected and does not limit
variable. Check that default value is in range and limit it if needed.
Also bump max_hash_size value to 65536 to correspond with manual page.
PR: kern/152887
MFC after: 2 weeks
don't force a window update if the window would not actually grow due to
window scaling. Specifically, if the window scaling factor is larger than
2 * MSS, then after the local reader has drained 2 * MSS bytes from the
socket, a window update can end up advertising the same window. If this
happens, the supposed window update actually ends up being a duplicate ACK.
This can result in an excessive number of duplicate ACKs when using a
higher maximum socket buffer size.
Reviewed by: bz
MFC after: 1 month
While it does not provide any functionality for IPv6, it provides
the sysctl nodes for net.inet.* that a lot of functionality shared
between IPv4 and IPv6 depends on. We cannot change these anymore
without breaking a lot of management and tuning.
In case of IPv6 only, we compile out everything but the sysctl node
declarations.
Reviewed by: gnn
Sponsored by: The FreeBSD Foundation
Sponsored by: iXsystems
MFC After: 5 days
to the maximum allowed window. Growing the window too large would cause
an underflow in the calculations in tcp_output() to decide if a window
update should be sent which would prevent the persist timer from being
started if data was pending and the other end of the connection advertised
an initial window size of 0.
PR: kern/154006
Submitted by: Stefan `Sec` Zehl sec 42 org
Reviewed by: bz
MFC after: 1 week
from another context at the moment of later access.
PR: kern/155555
Submitted by: Andrew Boyer <aboyer att averesystems.com>
Approved by: avg (mentor)
MFC after: 2 weeks
In some cases as udp6_connect() without an earlier bind(2) to an
address, v4-mapped scokets allowed and a non mapped destination
address, we can end up here with both v4 and v6 indicated:
inp_vflag = (INP_IPV4|INP_IPV6|INP_IPV6PROTO)
In that case however laddrp is NULL as the IPv6 path does not
pass in a copy currently.
Reported by: Pawel Worach (pawel.worach gmail.com)
Tested by: Pawel Worach (pawel.worach gmail.com)
MFC after: 6 days
X-MFC with: r219579
right mix. Still may need some tweaks but it
appears to almost not give away too much to an
RFC2581 flow, but can really minimize the amount of
buffers used in the net.
MFC after: 3 months
the RTT that a flow will build up in buffers in
transit. It is a slight modification to RFC2581
but is more friendly i.e. less aggressive.
MFC after: 3 months
1) Add four new points that allow you to get more information
to cc algo's
2) Fix the case where user changes module on a existing TCB, in
such a case, the initialization module needs to be called on all nets.
3) Move htcp_cc structure to a union that other modules can use.
4) Add 5th point for get/set socket options for cc_module specific options
MFC after: 2 months
