The change that introduced the L2ARC compression support also introduced
a bug where the on-disk size of the selected buffers could end up larger
than the target size if the ashift is greater than 9. This was because
the buffer selection could did not take into account the fact that
on-disk size could be larger than the in-memory buffer size due to
the alignment requirements.
At the moment b_asize is a misnomer as it does not always represent the
allocated size: if a buffer is compressed, then the compressed size is
properly rounded (on FreeBSD), but if the compression fails or it is not
applied, then the original size is kept and it could be smaller than what
ashift requires.
For the same reasons arcstat_l2_asize and the reported used space
on the cache device could be smaller than the actual allocated size
if ashift > 9. That problem is not fixed by this change.
This change only ensures that l2ad_hand is not advanced by more
than target_sz. Otherwise we would overwrite active (unevicted)
L2ARC buffers. That problem is manifested as growing l2_cksum_bad
and l2_io_error counters.
This change also changes 'p' prefix to 'a' prefix in a few places
where variables represent allocated rather than physical size.
The resolved problem could also result in the reported allocated size
being greater than the cache device's capacity, because of the
overwritten buffers (more than one buffer claiming the same disk
space).
This change is already in ZFS-on-Linux:
zfsonlinux/zfs@ef56b0780c
PR: 198242
PR: 195746 (possibly related)
Reviewed by: mahrens (https://reviews.csiden.org/r/229/)
Tested by: gkontos@aicom.gr (most recently)
MFC after: 15 days
X-MFC note: patch does not apply as is at the moment
Relnotes: yes
Sponsored by: ClusterHQ
Differential Revision: https://reviews.freebsd.org/D2764
Reviewed by: noone (@FreeBSD.org)
After fixing the 16-bits integer arithmetic overflow in 286981, we
should also make sure to fix the VPA sequence. Bring HPA and VPA in sync
with how we now implement CUP.
PR: 202612
Reported by: kcwu csie org
MFC after: 1 month
This isn't yet linked into the receive/transmit paths anywhere just yet.
This is part of a GSoC 2015 project.
Submitted by: Tiwei Bie <btw@mail.ustc.edu.cn>
Reviewed by: hiren, gnn
Differential Revision: https://reviews.freebsd.org/D3423
interface but in6if_do_dad() already had a check for IFF_LOOPBACK.
- Remove in6if_do_dad() check in in6_broadcast_ifa(). An address
which needs DAD always has IN6_IFF_TENTATIVE there.
- in6if_do_dad() now returns EAGAIN when the interface is not ready
since DAD callout handler ignores such an interface.
- In DAD callout handler, mark an address as IN6_IFF_TENTATIVE
when the interface has ND6_IFF_IFDISABLED. And Do IFF_UP and
IFF_DRV_RUNNING check consistently when DAD is required.
- draft-ietf-6man-enhanced-dad is now published as RFC 7527.
- Fix some typos.
FDT_DTB_STATIC is defined in opt_platform.h, and fdt_static_dtb is in
fdt_common.h, so include those files.
Sponsored by: Alex Perez/Inertial Computing
is configured on a channel that isn't valid in the new operating mode.
This isn't strictly true - it should find the first channel that is
available for the given operating mode.
However, I think defaulting to the first channel is fine - it's typically
available for all modes.
If someone would like to correctly implement this feature - try to
find a channel that is valid for the given operating mode and error
out if we can't find one.
This prevents various NICs (eg wpi(4)) from throwing a firmware error.
Tested:
* ath(4), STA/AP mode
* iwn(4), STA/adhoc mode
PR: kern/202502
Submitted by: Andriy Voskoboinyk <s3erios@gmail.com>
Provide and document the RANDOM_ENABLE_UMA option.
Change RANDOM_FAST to RANDOM_UMA to clarify the harvesting.
Remove RANDOM_DEBUG option, replace with SDT probes. These will be of
use to folks measuring the harvesting effect when deciding whether to
use RANDOM_ENABLE_UMA.
Requested by: scottl and others.
Approved by: so (/dev/random blanket)
Differential Revision: https://reviews.freebsd.org/D3197
Summary:
This is (probably step 1) of enhancing the book-e pmap to support the full
36-bit physical address space on Freescale e500 and e5500 cores.
Thus far it has only been regression tested on one platform. Since I only have
one other Book-E platform (e5500), that needs work beyond this, I haven't yet
tested it on this.
Test Plan: Regression tested on my RouterBoard RB800.
Reviewed By: marcel
Differential Revision: https://reviews.freebsd.org/D3027
Summary:
The RouterBoard uses a predefined partition map which doesn't exist in the fdt.
This change allows overriding the fdt slicer with a custom slicer, and uses this
custom slicer to define the flash map on the RouterBoard RB800.
D3305 converts the mpc85xx platform into a base class, so that systems based on
the mpc85xx platform can add their own overrides. This change builds on D3305,
and creates a RouterBoard (RB800) platform to initialize the slicer override.
Reviewed By: nwhitehorn, imp
Differential Revision: https://reviews.freebsd.org/D3345
Summary:
Some systems are based around mpc85xx, but need special initialization. By
making the mpc85xx platform a base class, these systems can be platform
subclasses, and perform board-specific initialization in addition to the mpc85xx
initialization.
Test Plan:
Tested on my RB800. A platform class was created, and will be committed
separately.
Reviewed By: nwhitehorn
Differential Revision: https://reviews.freebsd.org/D3305
CoDel is a parameterless queue discipline that handles variable bandwidth
and RTT.
It can be used as the single queue discipline on an interface or as a sub
discipline of existing queue disciplines such as PRIQ, CBQ, HFSC, FAIRQ.
Differential Revision: https://reviews.freebsd.org/D3272
Reviewd by: rpaulo, gnn (previous version)
Obtained from: pfSense
Sponsored by: Rubicon Communications (Netgate)
Add a check to preload_search_info to make sure mod is set. Most of the
callers of preload_search_info don't check that the mod parameter is
set, which can cause page faults. While at it, remove some now unnecessary
checks before calling preload_search_info.
Sponsored by: Citrix Systems R&D
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D3440
Introduce two new loader tunnables that can be used to disable PV disks and
PV nics at boot time. They default to 0 and should be set to 1 (or any
number different than 0) in order to disable the PV devices:
hw.xen.disable_pv_disks=1
hw.xen.disable_pv_nics=1
In /boot/loader.conf will disable both PV disks and nics.
Sponsored by: Citrix Systems R&D
Tested by: Karl Pielorz <kpielorz_lst@tdx.co.uk>
MFC after: 1 week
believe that the bug only affects mobile CPUs, at least I did not see
other reports, but it is impossible to detect it in madt_setup_local().
While there, reduce duplication in the information strings printed
when x2APIC is auto-disabled, and do not print the line when user
manually override the setting.
Tested and reviewed by: royger (previous version)
Sponsored by: The FreeBSD Foundation
The lock order reversal and a resulting deadlock were introduced
in r285021 / D2865. The problem is that zfs_register_callbacks() calls
dsl_prop_get_integer() that has to acquire spa_namespace_lock.
At the same time, spa_config_sync() is called with spa_namespace_lock
held and then it performs ZFS vnode operations that acquire
z_teardown_lock in the reader mode.
So, fix the problem by using dsl_prop_get_int_ds() instead of
dsl_prop_get_integer(). The former does not need to look up
the pool and the dataset by name.
Reported by: many
Reviewed by: delphij
Tested by: delphij, Jens Schweikhardt <schweikh@schweikhardt.net>
MFC after: 5 days
X-MFC with: r285021
When updating the row number when the cursor position escape sequence is
issued, we should make sure to store the intermediate result in a 32-bit
integer. If we fail to do this, the cursor may be set above the origin
region, which is bad.
This could cause libteken to crash when INVARIANTS is enabled, due to
the strict set of assertions that libteken has.
PR: 202540
Reported by: kcwu csie org
MFC after: 1 month
* Since r257190 the kernel must actually be loaded at a 64MB boundary, not 16MB.
* Don't program HID1 register on e500mc or e5500, they don't have this SPR.
* Set proper HID0 defaults for these new architectures.
There is still more work to be done for the various SoCs, and the PMAP code
still needs to be extended to 36-bit paddr, coming soon.
Obtained from: Semihalf
Sponsored by: Alex Perez/Inertial Computing
Rather than special casing on PCIC_BRIDGE || PCIC_PROCESSOR, allow all
HDRTYPE_BRIDGE types.
Obtained from: Semihalf
Sponsored by: Alex Perez/Intertial Computing
having some children, the children' reaper is not reset to the parent.
This allows for the situation where reaper has children but not
descendands and the too strict asserts in the reap_status() fire.
Remove the wrong asserts, add some clarification for the situation to
the procctl(2) REAP_STATUS.
Reported and tested by: feld
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Currently vm_pageout_scan() uses a ticks-based scheme to rate-limit
the number of times that the vm_lowmem event will happen. However
if no events happen for long enough for ticks to roll over, this
leaves us in a long window in which vm_lowmem events will not
happen.
Replace the use of ticks with time_t to prevent rollover from ever
being an issue.
Reviewed by: ian
MFC after: 3 weeks
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D3439
operations always had to be aligned and sized to cache lines. On armv6
and later, cache maintenance operates on a cache line if any part of
the line is referenced in the operation, so we don't need extra code to
align the edges of the sync range.
The significant changes and bugs fixed here are:
1. Fixed a bug in the progress display code:
When the user's filename is too big, or his terminal width is too
small, the progress code could wind up using a negative number for
the length of the "stars" that it uses to indicate progress.
This negative value was assigned to an unsigned variable, resulting
in a very large positive value.
The result is that we wound up writing garbage from memory to the
user's terminal.
With an 80 column terminal, a file name length of more than 35
characters would generate this problem.
To address this, we now set a minimum progress bar length, and
truncate the user's file name as needed.
This has been tested with large filenames and small terminals, and
at least produces reasonable results. If the terminal is too
narrow, the progress display takes up an additional line with each
update, but this is more user friendly than writing garbage to the
tty.
2. SATA drives connected via a SATA controller didn't have SCSI Inquiry
data populated in struct cam_device. This meant that the code in
fw_get_vendor() in fwdownload.c would try to match a zero-length
vendor ID, and so return the first entry in the vendor table. (Which
used to be HITACHI.) Fixed by grabbing identify data, passing the
identify buffer into fw_get_vendor(), and matching against the model
name.
3. SATA drives connected via a SAS controller do have Inquiry data
populated. The table included a couple of entries -- "ATA ST" and
"ATA HDS", intended to handle Seagate and Hitachi SATA drives attached
via a SAS controller. SCSI to ATA translation layers use a vendor
ID of "ATA" (which is standard), and then the model name from the ATA
identify data as the SCSI product name when they are returning data on
SATA disks. The cam_strmatch code will match the first part of the
string (because the length it is given is the length of the vendor,
"ATA"), and return 0 (i.e. a match). So all SATA drives attached to
a SAS controller would be programmed using the Seagate method
(WRITE BUFFER mode 7) of SCSI firmware downloading.
4. Issue #2 above covered up a bug in fw_download_img() -- if the
maximum packet size in the vendor table was 0, it tried to default
to a packet size of 32K. But then it didn't actually succeed in
doing that, because it set the packet size to the value that was
in the vendor table (0). Now that we actually have ATA attached
drives fall use the VENDOR_ATA case, we need a reasonable default
packet size. So this is fixed to properly set the default packet size.
5. Add support for downloading firmware to IBM LTO drives, and add a
firmware file validation method to make sure that the firmware
file matches the drive type. IBM tape drives include a Load ID and
RU name in their vendor-specific VPD page 0x3. Those should match
the IDs in the header of the firmware file to insure that the
proper firmware file is loaded.
6. This also adds a new -q option to the camcontrol fwdownload
subcommand to suppress informational output. When -q is used in
combination with -y, the firmware upgrade will happen without
prompting and without output except if an error condition occurs.
7. Re-add support for printing out SCSI inquiry information when
asking the user to confirm that they want to download firmware, and
add printing of ATA Identify data if it is a SATA disk. This was
removed in r237281 when support for flashing ATA disks was added.
8. Add a new camcontrol(8) "opcodes" subcommand, and use the
underlying code to get recommended timeout values for drive
firmware downloads.
Many SCSI devices support the REPORT SUPPORTED OPERATION CODES
command, and some support the optional timeout descriptor that
specifies nominal and recommended timeouts for the commands
supported by the device.
The new camcontrol opcodes subcommand allows displaying all
opcodes supported by a drive, information about which fields
in a SCSI CDB are actually used by a given SCSI device, and the
nominal and recommended timeout values for each command.
Since firmware downloads can take a long time in some devices, and
the time varies greatly between different types of devices, take
advantage of the infrastructure used by the camcontrol opcodes
subcommand to determine the best timeout to use for the WRITE
BUFFER command in SCSI device firmware downloads.
If the device recommends a timeout, it is likely to be more
accurate than the default 50 second timeout used by the firmware
download code. If the user specifies a timeout, it will override
the default or device recommended timeout. If the device doesn't
support timeout descriptors, we fall back to the default.
9. Instead of downloading firmware to SATA drives behind a SAS controller
using WRITE BUFFER, use the SCSI ATA PASS-THROUGH command to compose
an ATA DOWNLOAD MICROCODE command and it to the drive. The previous
version of this code attempted to send a SCSI WRITE BUFFER command to
SATA drives behind a SAS controller. Although that is part of the
SAT-3 spec, it doesn't work with the parameters used with LSI
controllers at least.
10.Add a new mechanism for making common ATA passthrough and
ATA-behind-SCSI passthrough commands.
The existing camcontrol(8) ATA command mechanism checks the device
type on every command executed. That works fine for individual
commands, but is cumbersome for things like a firmware download
that send a number of commands.
The fwdownload code detects the device type up front, and then
sends the appropriate commands.
11.In simulation mode (-s), if the user specifies the -v flag, print out
the SCSI CDB or ATA registers that would be sent to the drive. This will
aid in debugging any firmware download issues.
sbin/camcontrol/fwdownload.c:
Add a device type to the fw_vendor structure, so that we can
specify different download methods for different devices from the
same vendor. In this case, IBM hard drives (from when they
still made hard drives) and tape drives.
Add a tur_status field to the fw_vendor structure so that we can
specify whether the drive to be upgraded should be ready, not
ready, or whether it doesn't matter. Add the corresponding
capability in fw_download_img().
Add comments describing each of the vendor table fields.
Add HGST and SmrtStor to the supported SCSI vendors list.
In fw_get_vendor(), look at ATA identify data if we have a SATA
device to try to identify what the drive vendor is.
Add IBM firmware file validation. This gets VPD page 0x3, and
compares the Load ID and RU name in the page to the values
included in the header. The validation code will refuse to load
a firmware file if the values don't match. This does allow the
user to attempt a downgrade; whether or not it succeeds will
likely depend on the drive settings.
Add a -q option, and disable all informative output
(progress bars, etc.) when this is enabled.
Re-add the inquiry in the confirmation dialog so the user has
a better idea of which device he is talking to. Add support for
displaying ATA identify data.
Don't automatically disable confirmation in simulation (-s) mode.
This allows the user to see the inquiry or identify data in the
dialog, and see exactly what they would see when the command
actually runs. Also, in simulation mode, if the user specifies
the -v flag, print out the SCSI CDB or ATA registers that would
be sent to the drive. This will aid in debugging any firmware
download issues.
Add a timeout field and timeout type to the firmware download
vendor table. This allows specifying a default timeout and allows
specifying whether we should attempt to probe for a recommended
timeout from the drive.
Add a new fuction, fw_get_timeout(), that will determine
which timeout to use for the WRITE BUFFER command. If the
user specifies a timeout, we always use that. Otherwise,
we will use the drive recommended timeout, if available,
and fall back to the default when a drive recommended
timeout isn't available.
When we prompt the user, tell him what timeout we're going
to use, and the source of the timeout.
Revamp the way SATA devices are handled.
In fwdownload(), use the new get_device_type() function to
determine what kind of device we're talking to.
Allow firmware downloads to any SATA device, but restrict
SCSI downloads to known devices. (The latter is not a
change in behavior.)
Break out the "ready" check from fw_download_img() into a
new subfunction, fw_check_device_ready(). This sends the
appropriate command to the device in question -- a TEST
UNIT READY or an IDENTIFY. The IDENTIFY for SATA devices
a SAT layer is done using the SCSI ATA PASS-THROUGH
command.
Use the new build_ata_cmd() function to build either a SCSI or
ATA I/O CCB to issue the DOWNLOAD MICROCODE command to SATA
devices. build_ata_cmd() figures looks at the devtype argument
and fills in the correct CCB type and CDB or ATA registers.
Revamp the vendor table to remove the previous
vendor-specific ATA entries and use a generic ATA vendor
placeholder. We currently use the same method for all ATA
drives, although we may have to add vendor-specific
behavior once we test this with more drives.
sbin/camcontrol/progress.c:
In progress_draw(), make barlength a signed value so that
we can easily detect a negative value.
If barlength (the length of the progress bar) would wind up
negative due to a small TTY width or a large filename,
set the bar length to the new minimum (10 stars) and
truncate the user's filename. We will truncate it down to
0 characters if necessary.
Calculate a new prefix_len variable (user's filename length)
and use it as the precision when printing the filename.
sbin/camcontrol/camcontrol.c:
Implement a new camcontrol(8) subcommand, "opcodes". The
opcodes subcommand allows displaying the entire list of
SCSI commands supported by a device, or details on an
individual command. In either case, it can display
nominal and recommended timeout values.
Add the scsiopcodes() function, which calls the new
scsigetopcodes() function to fetch opcode data from a
drive.
Add two new functions, scsiprintoneopcode() and
scsiprintopcodes(), which print information about one
opcode or all opcodes, respectively.
Remove the get_disk_type() function. It is no longer used.
Add a new function, dev_has_vpd_page(), that fetches the
supported INQUIRY VPD list from a device and tells the
caller whether the requested VPD page is available.
Add a new function, get_device_type(), that returns a more
precise device type than the old get_disk_type() function.
The get_disk_type() function only distinguished between
SCSI and ATA devices, and SATA devices behind a SCSI to ATA
translation layer were considered to be "SCSI".
get_device_type() offers a third type, CC_DT_ATA_BEHIND_SCSI.
We need to know this to know whether to attempt to send ATA
passthrough commands. If the device has the ATA
Information VPD page (0x89), then it is an ATA device
behind a SCSI to ATA translation layer.
Remove the type argument from the fwdownload() subcommand.
Add a new function, build_ata_cmd(), that will take one set
of common arguments and build either a SCSI or ATA I/O CCB,
depending on the device type passed in.
sbin/camcontrol/camcontrol.h:
Add a prototype for scsigetopcodes().
Add a new enumeration, camcontrol_devtype.
Add prototypes for dev_has_vpd_page(), get_device_type()
and build_ata_cmd().
Remove the type argument from the fwdownload() subcommand.
sbin/camcontrol/camcontrol.8
Explain that the fwdownload subcommand will use the drive
recommended timeout if available, and that the user can
override the timeout.
Document the new opcodes subcommand.
Explain that we will attempt to download firmware to any
SATA device.
Document supported SCSI vendors, and models tested if known.
Explain the commands used to download firmware for the
three different drive and controller combinations.
Document that the -v flag in simulation mode for the fwdownload
subcommand will print out the SCSI CDBs or ATA registers that would
be used.
sys/cam/scsi/scsi_all.h:
Add new bit definitions for the one opcode descriptor for
the REPORT SUPPORTED OPCODES command.
Add a function prototype for scsi_report_supported_opcodes().
sys/cam/scsi/scsi_all.c:
Add a new CDB building function, scsi_report_supported_opcodes().
Sponsored by: Spectra Logic
MFC after: 1 week
Before that, the logic besides lle_create() was the following:
return existing if found, create if not. This behaviour was error-prone
since we had to deal with 'sudden' static<>dynamic lle changes.
This commit fixes bunch of different issues like:
- refcount leak when lle is converted to static.
Simple check case:
console 1:
while true;
do for i in `arp -an|awk '$4~/incomp/{print$2}'|tr -d '()'`;
do arp -s $i 00:22:44:66:88:00 ; arp -d $i;
done;
done
console 2:
ping -f any-dead-host-in-L2
console 3:
# watch for memory consumption:
vmstat -m | awk '$1~/lltable/{print$2}'
- possible problems in arptimer() / nd6_timer() when dropping/reacquiring
lock.
New logic explicitly handles use-or-create cases in every lla_create
user. Basically, most of the changes are purely mechanical. However,
we explicitly avoid using existing lle's for interface/static LLE records.
* While here, call lle_event handlers on all real table lle change.
* Create lltable_free_entry() calling existing per-lltable
lle_free_t callback for entry deletion
Also, follow the rules from watchdog(9) about what values to return in
various situations (especially, don't touch *error when asked to set a
non-zero timeout that isn't achievable on the hardware).
Also, move the READ/WRITE bus space access macros from the header into the
source file, and rename them to RD2/WR2 to make it clear they're 16-bit
accessors. (READ/WRITE just don't seem like good names to be in a public
header file.)
Increase MAXCPU number to the maximum known value the existing
hardware can support.
Obtained from: Semihalf
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3405
zero. The file_zone if no-free, but r284861 added trashing of the
freed memory. Most visible manifestation of the issue were 'memory
modified after free' panics for the file zone, triggered from
falloc_noinstall().
Add UMA_ZONE_ZINIT flag to turn off trashing. Mjg noted that it makes
sense to not trash freed memory for any non-free zone, which will be
done later.
Reported and tested by: pho
Discussed with: mjg
Sponsored by: The FreeBSD Foundation
The global variable has been only used for CPU startup ordering
which is not needed anyway.
Obtained from: Semihalf
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3296
Introduce supprot for SMP to GICv3 and ITS drivers.
Obtained from: Semihalf
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3299
This driver allows read the software reset switch state and control the
status LEDs.
The GPIO pins have their direction (input/output) locked down to prevent
possible short circuits.
Note that most people get a reset button that is a hardware reset. The
software reset button is available on boards from Netgate.
Sponsored by: Rubicon Communications (Netgate)
Though there is no direct midi_uninit() caller amongst existing drivers
at this moment, a quick experiment indicates that EBUSY gives users more
precise error message once drivers start to honour this result. For example,
emu_midi_detach() should check the result of mpu401_uninit() and block
module unloading if there is any MIDI I/O in progress.
MFC after: 2 weeks
being serviced and indeed unstoppable.
A scenario to reproduce this case is:
- the callout is being serviced and at same time,
- callout_reset() is called on this callout that sets
the CALLOUT_PENDING flag and at same time,
- callout_stop() is called on this callout and returns 1 (success)
even if the callout is indeed currently running and unstoppable.
This issue was caught up while making r284245 (D2763) workaround, and
was discussed at BSDCan 2015. Once applied the r284245 workaround
is not needed anymore and will be reverted.
Differential Revision: https://reviews.freebsd.org/D3078
Reviewed by: jhb
Sponsored by: Verisign, Inc.
An exception with an unknown reasion is the expected result of the
attempted execution of an instruction bit pattern that has no allocated
instruction.
Sponsored by: The FreeBSD Foundation
is a little tight in and by itself, but severily insufficient
when one needs to map a large frame buffer as part of console
initialization. 64MB slop should be enough for a while. As an
example: a 15" MacBook Pro with retina display needs ~28MB of
KVA for the frame buffer.
PR: 193745
size as defined by VT_FB_DEFAULT_WIDTH and VT_FB_DEFAULT_HEIGHT
(at this time 2048x1200). The default is really a max. We cap
the height and width to those defaults and position the screen
in the center of the frame buffer.
Ideally we use a bigger font to utility the entire real estate
that is the frame buffer, but that's seen as an improvement over
making it work first.
PR: 193745
The size2 is the maximum userland buffer size (used when the addresses are
copied back to userland).
Obtained from: pfSense
MFC after: 3 days
Sponsored by: Rubicon Communications (Netgate)
map. Handle busdma bouncing and ata PIO accesses by using global
frame used by the current CPU locally for the duration of
pmap_quick_enter/remove_page(). A spin mutex protects the concurent
frame use and prevents thread migration.
Noted by: royger
Reviewed by: alc, jah, royger (previous version)
Sponsored by: The FreeBSD Foundation
- Detach the gpiobus and the gpioc devices from the GPIO controller.
- Fix the leak of gpiobus IRQ rman(9) region descriptor.
- Fix the leak of child ivars and IRQ resource list.
While here return NULL (instead of 0) for a device_t that fails to allocate
the ivar memory.
Tested with gpiobus built as a module.
Sponsored by: Rubicon Communications (Netgate)
if desired.
Retire randomdev_none.c and introduce random_infra.c for resident
infrastructure. Completely stub out random(4) calls in the "without
DEV_RANDOM" case.
Add RANDOM_LOADABLE option to allow loadable Yarrow/Fortuna/LocallyWritten
algorithm. Add a skeleton "other" algorithm framework for folks
to add their own processing code. NIST, anyone?
Retire the RANDOM_DUMMY option.
Build modules for Yarrow, Fortuna and "other".
Use atomics for the live entropy rate-tracking.
Convert ints to bools for the 'seeded' logic.
Move _write() function from the algorithm-specific areas to randomdev.c
Get rid of reseed() function - it is unused.
Tidy up the opt_*.h includes.
Update documentation for random(4) modules.
Fix test program (reviewers, please leave this).
Differential Revision: https://reviews.freebsd.org/D3354
Reviewed by: wblock,delphij,jmg,bjk
Approved by: so (/dev/random blanket)
doesn't get overrun by things like NFS that can and do shove more than 32 segs when
being used with em(4) and TSO4.
Update tso handling code in em_xmit() with update from jhb@ in email thread:
https://lists.freebsd.org/pipermail/freebsd-net/2014-July/039306.html
set ifp->if_hw_tsomax, ifp->if_hw_tsomaxsegcount & ifp->if_hw_tsomaxsegsize
to appropriate values.
Define a TSO workaround "magic" number of 4 that is used to avoid an
alignment issue in hardware.
Change a couple of integer values that were used as booleans to actual
bool types.
Ensure that em_enable_intr() enables the appropriate mask of interrupts
and not just a hardcoded define of values.
PR: 200221 199174 195078
Differential Revision: https://reviews.freebsd.org/D3192
Reviewed by: erj jhb hiren
MFC after: 2 weeks
Sponsored by: Limelight Networks
to vm_page_try_to_cache() from vm_pageout_flush(). Other changes, most
recently r286814, have made this call unnecessary.
Reviewed by: kib
Discussed with: jeff
Tested by: pho
Sponsored by: EMC / Isilon Storage Division
The fix that I applied in r286798 is already good, but it assumes that
sizeof(int) > sizeof(short). Express the upperbound in terms of
UINT_MAX. By dividing that by 100, we're sure that the resulting value
is never larger than approximately UINT_MAX / 10, which is safe.
PR: 202326
Discussed with: kcwu csie org
MFC after: 1 month
This change isolates the most common case (e.g. successful lookup)
from more complicates scenarios. It also (tries to) make code
more simple by avoiding retry: cycle.
The actual goal is to prepare code to the upcoming change that will
allow LL address retrieval without acquiring LLE lock at all.
Reviewed by: ae
Differential Revision: https://reviews.freebsd.org/D3383
"fdt_file" and "fdtfile" U-Boot variables. Add one more check for
"fdt_file" loader(8) variable.
loader(8) variable takes precedence over u-boot env one
After CAM replaced old ATA stack, this driver processes no more then one
request at a time per channel. Using UMA after that is overkill, so
replace it with simple preallocation of one request per channel.
MFC after: 2 weeks
horizonal resolution (width). In those cases fb_bpp ended up
completely wrong -- as in 6 bytes per pixel or something like
that. Since we already have a way to calculate fb_depth given
the masks and fb_bpp is effectively the same as fb_depth, all
we need to do is make sure fb_bpp is rounded to the next
multiple of the number of bits in a byte -- we assume we can
divide by the number of bits in a byte throughout vt(4).
While here:
- simplify how we calculate fb_depth.
- use fb_bpp instead of fb_depth to calculate fb_stride;
we know we can divide fb_bpp.
- don't limit fb_width and fb_height by VT_FB_DEFAULT_WIDTH
and VT_FB_DEFAULT_HEIGHT (resp.). Those constants have
not relation to the size of the frame buffer.
This at least fixes "lower-resolution" Macs. We're talking
1280x1024 or so. There still is a problem with 27" Macs,
which typically have a horizontal resolution over 2K.
PR: 193745 (partial)
Ok'd by: emaste@
It has nothing to share with too huge ctl.c other then device descriptor,
but even that may be counted as design error that may be fixed later.
At some point we may even want to have several ioctl ports.
Its idea was to be a simple initiator and execute several commands from
kernel level, but FreeBSD never had consumer for that functionality,
while its implementation polluted many unrelated places..
intervals less than 250us was not handled properly. Add support for
high-bandwidth ISOCHRONOUS packets. USB webcams, USB audio and USB DVB
devices are expected to work better. High-bandwidth INTERRUPT
endpoints is not yet supported.
MFC after: 2 weeks
the kernel is tapping an USB transfer. This leads to a NULL pointer
access. The solution is to only trace while the USB bus lock is
locked.
MFC after: 2 weeks
There is no need for us to support parsing values that are larger than
the maximum terminal window size. In this case that would be the maximum
of unsigned short.
The problem with parsing larger values is that they can cause integer
overflows when adjusting the cursor position, leading to all sorts of
failing assertions.
PR: 202326
Reported by: kcwu csie org
MFC after: 1 month
- Add
nvlist_{add,get,take,move,exists,free}_{number,bool,string,nvlist,
descriptor} functions.
- Add support for (un)packing arrays.
- Add the nvl_array_next field to the nvlist structure.
If an array is added by the nvlist_{move,add}_nvlist_array function
this field will contains next element in the array.
- Add the nitems field to the nvpair and nvpair_header structure.
This field contains number of elements in the array.
- Add special flag (NV_FLAG_IN_ARRAY) which is set if nvlist is a part of
an array.
- Add special type (NV_TYPE_NVLIST_ARRAY_NEXT).This type is used only
on packing/unpacking.
- Add new API for traversing arrays (nvlist_get_array_next).
- Add the nvlist_get_pararr function which combines the
nvlist_get_array_next and nvlist_get_parent functions. If nvlist is in
the array it will return next element from array. If nvlist is last
element in array or it isn't in array it will return his
container (parent). This function should simplify traveling over nvlist.
- Add tests for new features.
- Add documentation for new functions.
- Add my copyright.
- Regenerate the sys/cddl/compat/opensolaris/sys/nvpair.h file.
PR: 191083
Reviewed by: allanjude (doc)
Approved by: pjd (mentor)
that already has a confirmed ClientID, the nfsrv_setclient() function would
not fill in the clientidp being returned. As such, the value of ClientID
returned would be whatever garbage was on the stack.
An NFSv4.1 client would not normally do this, but it appears that it can
happen for certain Linux clients. When it happens, the client persistently
retries the ExchangeID and Create_session after Create_session fails when
it uses the bogus clientid. With this patch, the correct clientid is replied.
This problem was identified in a packet trace supplied by
Ahmed Kamal via email.
Reported by: email.ahmedkamal@googlemail.com
MFC after: 2 weeks
This allows two things:
1. Sync'ing bounced maps in non-sleepable contexts. The physcopy* calls previously used could sleep on sf_buf operations in some cases.
2. Sync'ing user buffers outside the context of the owning process
Approved by: kib (mentor)
Reviewed by: Jason King <jason.brian.king@gmail.com>
Reviewed by: Josef Sipek <jeffpc@josefsipek.net>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Bart Coddens <bart.coddens@gmail.com>
illumos/illumos-gate@fc98fea58e
like RPI-B and RPI-2.
Description of problem:
USB transfers can process data in their callbacks sometimes causing
unacceptable latency for other USB transfers. Separate BULK completion
callbacks from CONTROL, INTERRUPT and ISOCHRONOUS callbacks, and give
BULK completion callbacks lesser execution priority than the
others. This way USB audio won't be interfered by heavy USB ethernet
usage for example.
Further serve USB transfer completion in a round robin fashion,
instead of only serving the most CPU hungry. This has been done by
adding a third flag to USB transfer queue structure which keeps track
of looping callbacks. The "command" callback function then decides
what to do when looping.
MFC after: 2 weeks
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <paul.dagnelie@delphix.com>
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Alex Reece <alex@delphix.com>
Reviewed by: Richard Elling <richard.elling@richardelling.com>
Approved by: Garrett D'Amore <garrett@damore.org>
Author: Prakash Surya <prakash.surya@delphix.com>
illumos/illumos-gate@2fd872a734
As a way to make it more difficult to introduce bugs into the ARC, and to
make it easier to diagnose issues when bugs do creep in, it would be
beneficial to change the type of the arc_state_t's arcs_size field to be
a refcount_t instead of a uint64_t. This would allow us to make stricter
checks when incrementing and decrementing the value with debugging enabled,
but still fallback to simple, fast atomic operations when debugging is
disabled.
when adjusting MFU size.
illumos/illumos-gate@31c46cf23chttps://www.illumos.org/issues/6033
When we're looking for the list containing oldest buffer we never
actually look at the MFU lists even when we try to evict from MFU.
looks like a copy paste error, the fix is here:
Reviewed by: Saso Kiselkov <saso.kiselkov@nexenta.com>
Reviewed by: Xin Li <delphij@delphij.net>
Reviewed by: Prakash Surya <me@prakashsurya.com>
Approved by: Matthew Ahrens <mahrens@delphix.com>
Author: Alek Pinchuk <alek@nexenta.com>
Obtained from: illumos
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Richard Elling <richard.elling@richardelling.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Prakash Surya <prakash.surya@delphix.com>
illumos/illumos-gate@244781f10d
This patch attempts to reduce lock contention on the current arc_state_t
mutexes. These mutexes are used liberally to protect the number of LRU
lists within the ARC (e.g. ARC_mru, ARC_mfu, etc). The granularity at
which these locks are acquired has been shown to greatly affect the
performance of highly concurrent, cached workloads.
root disk. The embedded image is linked into the kernel in the .mfs
section.
Add rules and variables to kern.pre.mk and kern.post.mk that handle the
linking of the image. First objcopy is used to generate an object file.
Then, the object file is linked into the kernel.
Submitted by: Steve Kiernan <stevek@juniper.net>
Reviewed by: brooks@
Obtained from: Juniper Networks, Inc.
Differential Revision: https://reviews.freebsd.org/D2903
ARM_ARCH >= 7, use the dmb() macro defined in machine/atomic.h
Submitted by: Steve Kiernan <stevek@juniper.net>
Reviewed by: imp@
Differential Revision: https://reviews.freebsd.org/D3355
The need for this appears as soon as you try to set the names to something
that isn't a "quoted literal". (I'm actually confused why quoted strings
aren't a problem as well, we must have some warning disabled.)
We first map 64KB at 0xA0000 and then determine whether to work
in text or graphics mode. When graphics mode, the mapping is
precisely what we need and everything is fine. But text mode,
has the frame buffer relocated to 0xB8000. We didn't map that
much to safely add 0x18000 bytes to the base address.
Now we first check whether to work in text or graphics mode and
then map the frame buffer at the right address and with the
right size (0xA0000+64KB for graphics, 0xB8000+32KB for text).
PR: 202276
Tested by: ed@
separate bunch of functions. The goal is to isolate actual lle
updates to permit more fine-grained locking.
Do all lle link-level update under AFDATA wlock.
Sponsored by: Yandex LLC
It seems we get EXCP_UNKNOWN from QEMU when executing zeroed memory.
Print a register dump here and signal illegal instruction. Also print
a register dump for other invalid exceptions, before panic.
Reviewed by: andrew
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3370
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Gordon Ross <gordon.w.ross@gmail.com>
Reviewed by: George Wilson <gwilson@zfsmail.com>
Approved by: Robert Mustacchi <rm@joyent.com>
illumos/illumos-gate@8f5190a540
6093 zfsctl_shares_lookup should only VN_RELE() on zfs_zget() success
Reviewed by: Gordon Ross <gwr@nexenta.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Dan McDonald <danmcd@omniti.com>
illumos/illumos-gate@0f92170f1e
Reviewed by: Toomas Soome <tsoome@me.com>
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Alex Reece <alex@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Matthew Ahrens <mahrens@delphix.com>
illumos/illumos-gate@ca0cc3918a
A ZFS feature flags (large blocks) tracks its refcounts as the number of
datasets that have ever used the feature. Several features of this type
are planned to be added (new checksum functions). This code should be made
common infrastructure rather than duplicating the code for each feature.
5925 zfs receive -o origin=
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Author: Paul Dagnelie <pcd@delphix.com>
While running 'zfs recv' we noticed that every 128th 8K block required a
read. We were seeing that restore_write() was calling dmu_tx_hold_write()
and the indirect block was not cached. We should prefetch upcoming indirect
blocks to avoid having to go to disk and blocking the restore_write().
Allow an incremental send stream to be received as a clone, even if the
stream does not mark it as a clone.
the last OFED update (r278886).
iWARP on FreeBSD is properly integrated with the network stack and the
iWARP drivers _never_ operate out of any private TCP port-space that is
invisible to the kernel. Instead, an iWARP connection shows up as a TCP
socket (which is what it is) fully visible to the kernel and standard
tools like netstat, sockstat, etc.
with higher quality registers (presumably in a module that has just been
loaded), do not undo the user's choice by switching to the new timecounter.
Document that behavior, and also the fact that there is no way to unregister
a timecounter (and thus no way to unload a module containing one).
redoing it as a separate driver. Now that each hardware timer is handled by
a separate instance of the timer driver, it no longer makes sense to bundle
the pps driver with the regular timecounter code. (When all 8 timers were
handled by one driver there was no choice about this.)
Split the hardware register definitions out to their own file, so that the
new pps driver (coming in a separate commit later) can share them.
With the PPS driver gone, the question of which hardware timer to use for
what purpose becomes much easier (some instances can't do the PPS capture).
Now we can just hardcore timer2 for eventtimer and timer3 for timecounter.
This also now only instantiates devices for the 2 hardware timers actually
used to implement eventtimer and timecounter. This is required so that
other drivers can come along and attach to other hardware timers to provide
other functionality. (In addition to PPS, this hardware can also do PWM
stuff, general pulse width and frequency measurements, etc. Maybe some
day we'll have drivers for those things.)
illumos/illumos-gate@1d3f896f54https://www.illumos.org/issues/5981
When dmu_objset_find_dp gets called with a read lock held, it fans out
the work to the task queue. Each task in turn acquires its own read
lock before calling the callback. If during this process anyone tries
to a acquire a write lock, it will stall all read lock requests.Thus
the tasks will never finish, the read lock of the caller will never
get freed and the write lock never acquired. deadlock.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Arne Jansen <jansen@webgods.de>
illumos/illumos-gate@12380e1e70https://www.illumos.org/issues/5269
When importing a pool (at boot or with zpool import) with many
filesystem, the process can take minutes. It doesn't matter whether
the pool has been exported cleanly or uncleanly. The problem is that
each dataset has its own log chain. On import, all datasets have to be
checked if there are logs to replay. The idea is to speed up this
process by paralellizing it.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Arne Jansen <jansen@webgods.de>
lzc_send_space when source is a bookmark
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Steven Hartland <killing@multiplay.co.uk>
Reviewed by: Bayard Bell <buffer.g.overflow@gmail.com>
Approved by: Albert Lee <trisk@nexenta.com>
Author: Max Grossman <max.grossman@delphix.com>
illumos/illumos-gate@643da460c8
- Document the kern_kevent_anonymous() function.
- Add assertions to ensure that we don't silently leave the kqueue
linked from a file descriptor table.
Reviewed by: jmg
Differential Revision: https://reviews.freebsd.org/D3364
There is still one TODO item for these calls: add file descriptor
passing. The data structures are already prepared for this. It's just
the translation that's missing.
Obtained from: http://github.com/NuxiNL/freebsd
given the hardware name.
The ti,hwmods property is used (among other things) to associate an fdt node
with a specific instance of some hardware. For example given a device node
that contains the property ti,hwmods = "timer3", if you call this passing
"timer" as the hwmod string to look for it would return 3.
illumos/illumos-gate@70163ac57ehttps://www.illumos.org/issues/5695
In dmu_sync_ready(), a hole block pointer will have it's logical size
explicitly set as it's necessary for replay purposes. To "undo" this,
dmu_sync_done() will zero out any hole that it finds. This becomes a
problem when using the "hole_birth" feature, as this will also wipe out
any birth time that might have happened to be set on the hole.
...
As a fix, the logic to zero out a hole is only applied to old style
holes with a birth time of zero. Holes created with the "hole_birth"
feature enabled will have a non-zero birth time, and will be skipped
(thus preserving the ltime, type, and level information as well).
In addition, zdb was updated to also print the ltime, type, and level
information for these new style holes. Previously, only the logical
birth time would be printed.
Author: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Bayard Bell <buffer.g.overflow@gmail.com>
Approved by: Dan McDonald <danmcd@omniti.com>
changes to prevent the 'rescue: not found' errors from happening.
Bump FreeBSD_version to 1100078 since there's been no version bumps
since this change was made. Only people that installed since r284356
really need to do this bootstrapping, but since crunchgen needs to
bootstrap for other reasons, bumping the number was the simplest.
We already properly return ENOTDIR when calling *at() on a non-directory
vnode, but it turns out that if you call it on a socket, we see EINVAL.
Patch up namei to properly translate this to ENOTDIR.
frame buffers and memory mapped UARTs.
1. Delay calling cninit() until after pmap_bootstrap(). This makes
sure we have PMAP initialized enough to add translations. Keep
kdb_init() after cninit() so that we have console when we need
to break into the debugger on boot.
2. Unfortunately, the ATPIC code had be moved as well so as to
avoid a spurious trap #30. The reason for which is not known
at this time.
3. In pmap_mapdev_attr(), when we need to map a device prior to the
VM system being initialized, use virtual_avail as the KVA to map
the device at. In particular, avoid using the direct map on amd64
because we can't demote by virtue of not being able to allocate
yet. Keep track of the translation.
Re-use the translation after the VM has been initialized to not
waste KVA and to satisfy the assumption in uart(4) that the handle
returned for the low-level console is the same as later returned
when the device is probed and attached.
4. In pmap_unmapdev() remove the mapping from the table when called
pre-init. Otherwise keep the mapping. During bus probe and attach
device resources are mapped and unmapped multiple times, which
would have us destroy the mapping used by the low-level console.
5. In pmap_init(), set pmap_initialized to signal that we're not
pre-init anymore. On amd64, bring the direct map in sync with the
translations created at that time.
6. Implement bus_space_map() and bus_space_unmap() for real: when
the tag corresponds to memory space, call the corresponding
pmap_mapdev() and pmap_unmapdev() functions to construct and
actual handle.
7. In efifb.c and vt_vga.c, remove the crutches and hacks and simply
call pmap_mapdev_attr() or bus_space_map() as desired.
Notes:
1. uart(4) already used bus_space_map() during low-level console
setup but since serial ports have traditionally been I/O port
based, the lack of a proper implementation for said function
was not a problem. It has always supported memory mapped UARTs
for low-level consoles by setting hw.uart.console accordingly.
2. The use of the direct map on amd64 without setting caching
attributes has been a bigger problem than previously thought.
This change has the fortunate (and unexpected) side-effect of
fixing various EFI frame buffer problems (though not all).
PR: 191564, 194952
Special thanks to:
1. XipLink, Inc -- generously donated an Intel Bay Trail E3800
based eval board (ADLE3800PC).
2. The FreeBSD Foundation, in particular emaste@ -- for UEFI
support in general and testing.
3. Everyone who tested the proposed for PR 191564.
4. jhb@ and kib@ for being a soundboard and applying a clue bat
if so needed.
As CloudABI processes cannot adjust their signal handlers, we need to
make sure that we start up CloudABI processes with consistent signal
masks. Though the POSIx standard signal behavior is all right, we do
need to make sure that we ignore SIGPIPE, as it would otherwise be
hard to interact with pipes and sockets.
Extend execsigs() to iterate over ps_sigignore and call sigdflt() for
each of the ignored signals.
Reviewed by: kib
Obtained from: https://github.com/NuxiNL/freebsd
Differential Revision: https://reviews.freebsd.org/D3365
The cloudlibc pdwait() function ends up using FreeBSD's kqueue() in
combination with EVFILT_PROCDESC. This depends on CAP_EVENT -- not
CAP_PDWAIT.
Obtained from: https://github.com/NuxiNL/freebsd
single ICR MSR write. This is in contrast with the xAPIC mode, where
we must read current ICR value, do bit fiddling and perform two 32-bit
register writes. As a consequence, there is no need to disable
interrupts around ICR value calculation and write.
Note that typical users of ipi_raw() and ipi_vectored() take spinlock,
which already disables interrupts. For them, the change removes
unneeded CLI and POPFL/Q instructions.
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
data is synchronized by store/load to the variable. The
lapic_write_icr() function ensures that store buffers are flushed
before IPI command is issued.
Discussed with: bde
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
the SMP structures, synchronized with the load by release store in
release_aps().
The change is formal, x86 strong memory model implicitely provided
the guarantees.
Discussed with: bde
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Blocking on locks and condition variables can be accomplished by polling
and using the special filters CONDVAR, LOCK_RDLOCK and LOCK_WRLOCK.
For now it wouldn't make sense to implement this functionality into
kqueue() itself, for the reason that they are CloudABI specific and
would require us to resize 'struct kevent' to hold all of the parameters
of interest.
Add a bandaid to the CloudABI poll system call to call into the futex
code directly if it detects specific combinations of events that are
used by the C library.
Obtained from: https://github.com/NuxiNL/freebsd
This change implements two functions, cloudabi64_kevent_copyin() and
cloudabi64_kevent_copyout(), that convert CloudABI structures to
FreeBSD's struct kevent. CloudABI uses two structures: subscription_t
and event_t. The former is used for input, whereas the latter is used
for output. Unlike struct kevent, fields aren't overloaded for multiple
purposes or for separate event types.
For poll() we call into the newly introduced kern_kevent_anonymous()
function that allows us to poll without a file descriptor. This function
is not only used by poll(), but also by functions such as
sleep() and clock_nanosleep().
Reviewed by: jmg
Obtained from: https://github.com/NuxiNL/freebsd
Differential Revision: https://reviews.freebsd.org/D3308
- the nvlist error is set, or
- the nvlist case ignore flag is not set and there is attend to
add element with duplicated name.
In both cases the nvlist_move_nvpair() function free nvpair structure.
If library will try to unpack a binary blob which contains duplicated
names it will end up with using memory after free.
To prevent that, the nvlist_move_nvpair() function interface is changed
to report about failure and checks are added to the nvpair_xunpack()
function.
Discovered thanks to the american fuzzy lop.
Approved by: pjd (mentor)
define GID_VIDEO in sys/conf.h, and use it together with UID_ROOT
to define DRM_DEV_UID and DRM_DEV_GID in the drmP.h files.
So there is one place where the UID's and GID's are defined.
Submitted by: ed@
Reviewed by: ed@, dumbbell@
Differential Revision: https://reviews.freebsd.org/D3360
If CloudABI processes open files with a set of requested rights that do
not match any of the privileges granted by O_RDONLY, O_WRONLY or O_RDWR,
we'd better fall back to O_RDONLY -- not O_WRONLY.
CloudABI's polling system calls merge the concept of one-shot polling
(poll, select) and stateful polling (kqueue). They share the same data
structures.
Extend FreeBSD's kqueue to provide support for waiting for events on an
anonymous kqueue. Unlike stateful polling, there is no need to support
timeouts, as an additional timer event could be used instead.
Furthermore, it makes no sense to use a different number of input and
output kevents. Merge this into a single argument.
Obtained from: https://github.com/NuxiNL/freebsd
Differential Revision: https://reviews.freebsd.org/D3307
can be seen as the same as 0.2. There are changes with the data passed to
CPU_SUSPEND, however we don't yet use this call.
Sponsored by: ABT Systems Ltd
5376 arc_kmem_reap_now() should not result in clearing arc_no_grow
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Steven Hartland <killing@multiplay.co.uk>
Reviewed by: Richard Elling <richard.elling@richardelling.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Matthew Ahrens <mahrens@delphix.com>
illumos/illumos-gate@2ec99e3e98
This permits us having all (not fully true yet) all the info
needed in lookup process in first 64 bytes of 'struct llentry'.
struct llentry layout:
BEFORE:
[rwlock .. state .. state .. MAC ] (lle+1) [sockaddr_in[6]]
AFTER
[ in[6]_addr MAC .. state .. rwlock ]
Currently, address part of struct llentry has only 16 bytes for the key.
However, lltable does not restrict any custom lltable consumers with long
keys use the previous approach (store key at (lle+1)).
Sponsored by: Yandex LLC
The existing sys_cap_rights_limit() expects that a cap_rights_t object
lives in userspace. It is therefore hard to call into it from
kernelspace.
Move the interesting bits of sys_cap_rights_limit() into
kern_cap_rights_limit(), so that we can call into it from the CloudABI
compatibility layer.
Obtained from: https://github.com/NuxiNL/freebsd
Differential Revision: https://reviews.freebsd.org/D3314
* Split lltable_init() into lltable_allocate_htbl() (alloc
hash table with default callbacks) and lltable_link() (
links any lltable to the list).
* Switch from LLTBL_HASHTBL_SIZE to per-lltable hash size field.
* Move lltable setup to separate functions in in[6]_domifattach.
