exactly the right size. Do it differently - pass a length rather than an
end-of-string+1 pointer as this is more convenient anyway. Get rid of
the bogus +1's.
to make asynchronous RPCs. This is needed to help fix ypbind, which can no
longer override the clnt_dg_call() method (formerly the clntudp_call()
method) due to all the internal descriptor locking code in TI-RPC. Turning
on this flag allows us to send an RPC request, then return immediately,
and handle a reply later, rather than being forced to do the request
and reply in a single function call.
Also fix a byte ordering bug: when clnt_dg_call() increments the XID
prior to transmitting a request, it uses the raw value, which is wrong.
The XID is stored in network byte order, i.e. big-endian. The CLSET_XID
and CLGET_XID commands in clnt_dg_control() use ntohl()/htonl() to get
the byte ordering right, but because clnt_dg_call() does not do this,
using CLSET_XID/CLGET_XID doesn't actually work, unless you're on a
big endian host, which we aren't (yet). Fix clnt_dg_call() to byte swap
properly when doing the increment.
Some of the major changes include:
- The SCSI error handling portion of cam_periph_error() has
been broken out into a number of subfunctions to better
modularize the code that handles the hierarchy of SCSI errors.
As a result, the code is now much easier to read.
- String handling and error printing has been significantly
revamped. We now use sbufs to do string formatting instead
of using printfs (for the kernel) and snprintf/strncat (for
userland) as before.
There is a new catchall error printing routine,
cam_error_print() and its string-based counterpart,
cam_error_string() that allow the kernel and userland
applications to pass in a CCB and have errors printed out
properly, whether or not they're SCSI errors. Among other
things, this helped eliminate a fair amount of duplicate code
in camcontrol.
We now print out more information than before, including
the CAM status and SCSI status and the error recovery action
taken to remedy the problem.
- sbufs are now available in userland, via libsbuf. This
change was necessary since most of the error printing code
is shared between libcam and the kernel.
- A new transfer settings interface is included in this checkin.
This code is #ifdef'ed out, and is primarily intended to aid
discussion with HBA driver authors on the final form the
interface should take. There is example code in the ahc(4)
driver that implements the HBA driver side of the new
interface. The new transfer settings code won't be enabled
until we're ready to switch all HBA drivers over to the new
interface.
src/Makefile.inc1,
lib/Makefile: Add libsbuf. It must be built before libcam,
since libcam uses sbuf routines.
libcam/Makefile: libcam now depends on libsbuf.
libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the
sbuf sources from sys/kern.
bsd.libnames.mk: Add LIBSBUF.
camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically
linked, we can't depend on the dynamic linker
to pull in libsbuf.
camcontrol.c: Use cam_error_print() instead of checking for
CAM_SCSI_STATUS_ERROR on every failed CCB.
sbuf.9: Change the prototypes for sbuf_cat() and
sbuf_cpy() so that the source string is now a
const char *. This is more in line wth the
standard system string functions, and helps
eliminate warnings when dealing with a const
source buffer.
Fix a typo.
cam.c: Add description strings for the various CAM
error status values, as well as routines to
look up those strings.
Add new cam_error_string() and
cam_error_print() routines for userland and
the kernel.
cam.h: Add a new CAM flag, CAM_RETRY_SELTO.
Add enumerated types for the various options
available with cam_error_print() and
cam_error_string().
cam_ccb.h: Add new transfer negotiation structures/types.
Change inq_len in the ccb_getdev structure to
be "reserved". This field has never been
filled in, and will be removed when we next
bump the CAM version.
cam_debug.h: Fix typo.
cam_periph.c: Modularize cam_periph_error(). The SCSI error
handling part of cam_periph_error() is now
in camperiphscsistatuserror() and
camperiphscsisenseerror().
In cam_periph_lock(), increase the reference
count on the periph while we wait for our lock
attempt to succeed so that the periph won't go
away while we're sleeping.
cam_xpt.c: Add new transfer negotiation code. (ifdefed
out)
Add a new function, xpt_path_string(). This
is a string/sbuf analog to xpt_print_path().
scsi_all.c: Revamp string handing and error printing code.
We now use sbufs for much of the string
formatting code. More of that code is shared
between userland the kernel.
scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly
useful in the first place.
Add a new error action, SS_REQSENSE. (Send a
request sense and then retry the command.)
This is useful when the controller hasn't
performed autosense for some reason.
Change the default actions around a bit.
scsi_cd.c,
scsi_da.c,
scsi_pt.c,
scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection
timeouts shouldn't be covered by a sense flag.
scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO.
Get rid of the last vestiges of a read/write
interface.
libkern/bsearch.c,
sys/libkern.h,
conf/files: Add bsearch.c, which is needed for some of the
new table lookup routines.
aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if
CAM_NEW_TRAN_CODE is defined.
sbuf.h,
subr_sbuf.c: Add the appropriate #ifdefs so sbufs can
compile and run in userland.
Change sbuf_printf() to use vsnprintf()
instead of kvprintf(), which is only available
in the kernel.
Change the source string for sbuf_cpy() and
sbuf_cat() to be a const char *.
Add __BEGIN_DECLS and __END_DECLS around
function prototypes since they're now exported
to userland.
kdump/mkioctls: Include stdio.h before cam.h since cam.h now
includes a function with a FILE * argument.
Submitted by: gibbs (mostly)
Reviewed by: jdp, marcel (libsbuf makefile changes)
Reviewed by: des (sbuf changes)
Reviewed by: ken
o Revise description in light of commits over last month including:
- ACL editing library is now implemented
- ACLs are now implemented
Obtained from: TrustedBSD Project
because libc/rpc/key_call.c references uname(), and ps/print.c also
defines uname(), and ps is linked statically. This leads to a symbol
clash. The userland uname(3) kinda sucked anyway as the hostname
etc was too short. And since the libc rpc interface now uses
the utsname.nodename which gets truncated, I was tempted into doing
something about it. Create a new userland uname function, called
__xuname() which takes an extra argument that allows you to change
the size of the fields. uname() becomes a static inline function
in sys/utsname.h that passes the extra argument in. struct utsname
has its field members expanded by default now in userland.
We still provide a 'uname' externally linkable function for things
that either think that they ``know'' the utsname format and assume
32 character strings and bypass the include file, or objects that
are linked against old libcs. ie: just about every plausible
case that I can think of is covered. Should we ever change the
default lengths again, a libc major bump should not be required
as the size is now passed to the function.
XXX the uname(2) in the kernel is for FreeBSD 1.1 binary compatability!
All the uname(3) functions that are exported to userland are actually
implemented in libc with sysctl. uname(1) uses sysctl directly and
does not call uname(3).
PR: bin/4688
acl_add_perm, acl_clear_perms, acl_copy_entry, acl_create_entry,
acl_delete_perm, acl_get_permset, acl_get_qualifier, acl_get_tag_type,
acl_set_permset, acl_set_qualifier, acl_set_tag_type
This brings us within 4 functions of a full ACL editing library.
Reviewed by: rwatson
Make struct cmessage visible from socket.h (about 4 places were
defining it for themselves which wasn't good)
Make __rpc_get_local_uid() useable and give it prototype that's
visible.
Fix some issues with printing out usernames from rpcbind and keyserv.
changed. These were taken from the 4.2-RELEASE dist on ftp.freebsd.org.
This will be MFC'd shortly as it is required in RELENG_4 to maintain
compatability with binaries linked against these libraries.
should have been repo-copied from it in the first place.
Apply all of our fixes up to and including revision 1.14 to
the original rpc.3 manpage, including conversion to mdoc(7).
number of paths which glob(3) will return. Remove the hardcoded limit
from the last commit, which restores the previous unbounded behavior.
Document the new flag in the manual page.
associated changes that had to happen to make this possible as well as
bugs fixed along the way.
Bring in required TLI library routines to support this.
Since we don't support TLI we've essentially copied what NetBSD
has done, adding a thin layer to emulate direct the TLI calls
into BSD socket calls.
This is mostly from Sun's tirpc release that was made in 1994,
however some fixes were backported from the 1999 release (supposedly
only made available after this porting effort was underway).
The submitter has agreed to continue on and bring us up to the
1999 release.
Several key features are introduced with this update:
Client calls are thread safe. (1999 code has server side thread
safe)
Updated, a more modern interface.
Many userland updates were done to bring the code up to par with
the recent RPC API.
There is an update to the pthreads library, a function
pthread_main_np() was added to emulate a function of Sun's threads
library.
While we're at it, bring in NetBSD's lockd, it's been far too
long of a wait.
New rpcbind(8) replaces portmap(8) (supporting communication over
an authenticated Unix-domain socket, and by default only allowing
set and unset requests over that channel). It's much more secure
than the old portmapper.
Umount(8), mountd(8), mount_nfs(8), nfsd(8) have also been upgraded
to support TI-RPC and to support IPV6.
Umount(8) is also fixed to unmount pathnames longer than 80 chars,
which are currently truncated by the Kernel statfs structure.
Submitted by: Martin Blapp <mb@imp.ch>
Manpage review: ru
Secure RPC implemented by: wpaul
- lowercase Nd argument
- mark function arguments with Fa
- mark defined values with Dv
- simply copying POSIX text for RETURN VALUES and ERRORS sections is not
always a good idea. POSIX uses the word "shall" indicating the behavior
the correct implementation should follow.
reserved word, causing breakage when a C++ program included libutil.h
This change will be propagated elsewhere shortly.
Submitted by: jkh
Obtained from: TrustedBSD Project
o acl_calc_mask(): calculates the ACL mask entry associated with
the given ACL.
o acl_delete_entry(): remove a specified ACL entry from the given
ACL.
Approved by: rwatson
`err()'). libdisk does! and additionally libdisk gets confused on Alpha
disks with foreign disklabels, throws up its hands and exits. This is
the cause of the "going no where without my init" install bug on the Alpha.
So now on the Alpha, rather than call err(), we print the error string and
continue processing.
Submitted by: jkh
since they not allows POSIXly legal locale data. Currently, if relaxed form
POSIXly legal locale data will be used right now, some programs will be broken,
but it means that either locale data or programs must be fixed, not the library.
Introduce non-standard md_order (month/day order) locale field to be used later
via nl_langinfo(). Currently %EF and %Ef emulated using this field, but they
planned for remove in future in favour of nl_langinfo() test field.
Implement %F per POSIX
char *
FooFileChunk(const char *filename, char *buf, off_t offset, off_t length)
Which only hashes part of a file.
Implement FooFile() in terms of this function.
Submitted by: roam
is currently set to 10000. This is intended to prevent glob from running
amok when a highly recursive path is provided (such as "../*/../*/../*/...")
Reviewed by: Diane Bruce <db@db.net>, jhb
utility functions which convert between string namespace names and
numeric constants used by the interface. Right now, two namespaces
are supported, EXTATTR_NAMESPACE_SYSTEM ("system") and
EXTATTR_NAMESPACE_USER ("user"). These functions are used by
various userland EA utilities, rather than hard coding the routines
all over the place.
Obtained from: TrustedBSD Project
o Rename internal library functions so that they are prefixed with
_posix1e or _POSIX1E, removing them from the application namespace (and
potential conflict with other ACL functions elsewhere in the system).
Obtained from: TrustedBSD Project
gratuitous difference between us and our sister project.
This was given to me _ages_ ago. May apologies to Paul for the length
of time its taken me to commit.
Obtained from: Niels Provos <provos@physnet.uni-hamburg.de>/OpenBSD
Submitted by: Paul Herman <pherman@frenchfries.net>
Reviewed by: David Cross <dec@freebsd.org>, jkh <jkh@freebsd.org>
Approved by: jkh <jkh@freebsd.org>
Obtained from: Ian Dowse <iedowse@maths.tcd.ie>, David Cross <dec@freebsd.org>
We have been running this patch on a production NIS server for 2.5 weeks now.
Normally we would have ypserv die at least once a week, and often many times
a day.
This patch treats and error from select as zeroing out the FD_SET to indicate
that no fds are ready for reading. This is safe because the rpc code
always re-inits the FDSET before calling select.
The below text is quoted from the latest POSIX draft:
: The values of locale categories shall be determined by a precedence
: order; the first condition met below determines the value:
:
: 1. If the LC_ALL environment variable is defined and is not null,
: the value of LC_ALL shall be used.
: 2. If the LC_* environment variable (LC_COLLATE, LC_CTYPE, LC_MESSAGES,
: LC_MONETARY, LC_NUMERIC, LC_TIME) is defined and is not null, the
: value of the environment variable shall be used to initialize the
: category that corresponds to the environment variable.
: 3. If the LANG environment variable is defined and is not null, the
: value of the LANG environment variable shall be used.
: 4. If the LANG environment variable is not set or is set to the empty
: string, the implementation-defined default locale shall be used.
The conditions 1 and 2 were interchanged, i.e., LC_* were looked first,
then LC_ALL, then LANG (note that LC_ALL and LANG were essentially the
same, providing the default, with LC_ALL taking precedence over LANG).
Now, LC_ALL and LANG serve the different purposes. LC_ALL overrides
any LC_*, and LANG provides the default fallback.
Testcase:
/usr/bin/env LC_ALL=C LC_TIME=de_DE.ISO_8859-1 /bin/date
Should return date in the "C" locale format.
Inspired by: date(1) reference page in the Draft
lock definitions to it. flockfile state is now allocated
along with the rest of FILE. This eliminates the need for a
separate allocation of flockfile state as well as eliminating
the mutex/lock used to serialize its allocation.
Even better formula from random() could not be intetgrated because rand_r()
supposed to store its state in the single variable (but table needed for
random() algorithm integration).
- new EV_SET macro,
- NOTE_LOWAT option for low water marks on read/write filters,
- NOTE_REVOKE for filesystem unmounting (and revoke() calls)
- improved API for EVFILT_AIO
sysctls exporting swap information. When running on a live kernel,
the sysctl's will now be used instead of kvm_read, allowing consumers of
this interface to run without privilege (setgid kmem). Retain the
ability to run on coredumps, or on a kernel using kmem if explicitly
pointed at one.
A side effect of this change is that kvm_getswapinfo() is faster now in
the general case. If the SWIF_DUMP_TREE flag is given (pstat -ss does
this), the radix tree walker, which still uses kvm_read in any case, is
invoked, and therefore does require privilege.
Submitted by: Thomas Moestl <tmoestl@gmx.net>
Reviewed by: freebsd-audit
This is about to be replaced anyway by initialization explicitly
instead of lazily, and reducing the complexity of it. As it is
now, this will work fine, however.
while with threaded software in -CURRENT acting very "weird". It has
seemed, for example, in Mozilla that threads attempting to do host
lookups have been locking up. That's exactly the case.
There was a race condition in the implementation of the initialization
of the mutex used to protect FILE operations, first of all: multiple
instances of FLOCKFILE() in libc could occur on the same FILE at
the same time and cause strange behavior by overwriting eachothers'
creation of the mutex and the rest of the file lock.
Secondly, it's not appropriate to test the "validity" of the file
descriptor referenced by the FILE; if the code is calling FLOCKFILE()
or FUNLOCKFILE(), it wants the FILE to be locked or unlocked, not
to be locked or unlocked on the condition that _file is >= 0. This
also could quite easily cause leaks by failing to perform the lock or
unlock operation when it actually is needed.
Mozilla now works again on -CURRENT when linked to libc_r.so.5 and
libc.so.5.
ABI change. There is some serious evilness here to work around some
gcc weaknesses. We need to know the sizeof(FILE) manually until __sF
goes away in the next major bump. We have the size for Alpha and i386,
missing is ia64, ppc and sparc* (and i386 with 64 bit longs).
At some point down the track we can change the stdin etc #defines to
stop hard coding the size of FILE into application binaries.
Lots of head scratching and ideas and testing by: green, imp
causing some versions of as to dump core. This survived make
buildworld/installworld and the building gettext port afterwards.
Submitted by: <nnd@mail.nsk.ru> "N.Dudorov"
Reviewed by: "Daniel M. Eischen" <eischen@vigrid.com>
o Back out the __std* stuff. Can't figure out how to do this right now,
so we'll save it for late.
o use _up as a pointer for extra fields that we need to access.
o back out the libc major version bump.
Submitted by: green
reviewed by: peter, imp, green, obrien (to varying degrees).
We'll fix the "how do we stop encoding sizeof(FILE) in binaries" part
later.
Change __dtoa to not free the string it allocated the previous time it was
called. The caller now frees the string after usage if appropiate.
PR: 15070
Reviewed by: deischen
bikeshed in -arch. It isn't quite over, but it has been well established
that this can be adjusted or refined. But we do seem to have consensis
on a major bump of some sort. After this, it should reasonably safe
to build world again.
This change is to get rid of __sF[] and use seperate __stdin/out/err
handles. This means we can pad on extra bits onto the end of FILE
at will without going through this all over again. __sF[] was evil
because it compiled the sizeof(FILE) into every stdio using program.
Asbestos suit on: check!
Peril sensitive sunglasses on: check!
*gulp!*
try a hopefully more robust stdin/stdout/stderr. This costs an indirect
pointer fetch, but saves us from changes in 'FILE'. The __stdin stuff
is there to not pollute application name space if the application does
not use <stdio.h> and also in case something depended on the current
behavior where stdin etc was a #define.
Reviewed by: eischen, dillon
application to provide locking for I/O operations. This doesn't
break any of my tests, but the old behavior can be restored by
compiling with _FDLOCKS_ENABLED. This will eventually be removed
when it is obvious it does not cause any problems.
Remove most of flockfile implementation, with the exception of
flockfile_debug.
Make error messages more informational (submitted by Mike Heffner
<spock@techfour.net>, who's now known as mikeh@FreeBSD.org).
Add a lock to FILE. flockfile and friends are now implemented
(for the most part) in libc. flockfile_debug is implemented in
libc_r; I suppose it's about time to kill it but will do it in
a future commit.
Fix a potential deadlock in _fwalk in a threaded environment.
A file flag (__SIGN) was added to stdio.h that, when set, tells
_fwalk to ignore it in its walk. This seemed to be needed in
refill.c because each file needs to be locked when flushing.
Add a stub for pthread_self in libc. This is needed by flockfile
which is allowed by POSIX to be recursive.
Make fgetpos() error return value (-1) match man page.
Remove recursive calls to locked functions (stdio); I think I've
got them all, but I may have missed a couple.
A few K&R -> ANSI conversions along with removal of a few instances
of "register".
$Id$ -> $FreeBSD$ in libc/stdio/rget.c
Not objected to: -arch, a few months ago
it in.
Some review from -hackers (some time ago), and I think the best way to
get this improved (if it needs improving) or updating, is to bring it in.
PR: docs/12557
Submitted by: Tim Singletary <tsingle@triana.gsfc.nasa.gov>
LC_NUMERIC::grouping) values.
. Always set __XXX_changed flags then loading numeric & monetary locale
categories to allow localeconv() to use C locale also.
LC_NUMERIC fields, but only for *grouping fields - other fields are converted
to a chars in localeconv(), so final change is:
"-1" -> "127"
127 here is because CHAR_MAX supposed, which is _positive_ (SUSv2 requirement),
not negative as 255. It is still a bit of hack. To find real CHAR_MAX will be
better to sprintf() it once somewhere in static buffer. *grouping parsing
still broken and missing and needs to be implemented.
LC_MONETARY, LC_NUMERIC are byte-arrays, not ASCII strings!
Fix "C" locale, change "-1" to {CHAR_MAX, '\0'} according to standards.
This is only partial fix - locale loading procedure remains broken as before
and load too big values for all locales. All numeric strings there should be
converted with something like atoi() and placed into bytes. Maybe I do it
later, if someone will not fix it faster.
Change __dtoa to not free the string it allocated the previous time it was
called. The caller now frees the string after usage if appropiate.
PR: 15070
to be the same as -ragged in the current implementation) to
-ragged. With mdocNG, -filled displays produce the correct
output, formatted and justified to both margins.
Add another check for thread library initialization (jdp, we
really need a way to get _thread_init called at program start
before any constructors are run).
and treating (almost) all system calls the same way:
__sys_foo - actual syscall
foo, _foo - weak definitions to __sys_foo
Change PSEUDO syscalls (currently only _exit and _getlogin) to
be __sys_foo (T) and _foo (W).
Add $FreeBSD$ to a few files to satisfy commitprep.
Suggested by: bde
_foo - wrapped system call
foo - weak definition to _foo
and for cancellation points:
_foo - wrapped system call
__foo - enter cancellation point, call _foo(), leave
cancellation point
foo - weak definition to __foo
Change use of global _thread_run to call a function to get the
currently running thread.
Make all pthread_foo functions weak definitions to _pthread_foo,
where _pthread_foo is the implementation. This allows an application
to provide its own pthread functions.
Provide slightly different versions of pthread_mutex_lock and
pthread_mutex_init so that we can tell the difference between
a libc mutex and an application mutex. Threads holding mutexes
internal to libc should never be allowed to exit, call signal
handlers, or cancel.
Approved by: -arch
adding (weak definitions to) stubs for some of the pthread
functions. If the threads library is linked in, the real
pthread functions will pulled in.
Use the following convention for system calls wrapped by the
threads library:
__sys_foo - actual system call
_foo - weak definition to __sys_foo
foo - weak definition to __sys_foo
Change all libc uses of system calls wrapped by the threads
library from foo to _foo. In order to define the prototypes
for _foo(), we introduce namespace.h and un-namespace.h
(suggested by bde). All files that need to reference these
system calls, should include namespace.h before any standard
includes, then include un-namespace.h after the standard
includes and before any local includes. <db.h> is an exception
and shouldn't be included in between namespace.h and
un-namespace.h namespace.h will define foo to _foo, and
un-namespace.h will undefine foo.
Try to eliminate some of the recursive calls to MT-safe
functions in libc/stdio in preparation for adding a mutex
to FILE. We have recursive mutexes, but would like to avoid
using them if possible.
Remove uneeded includes of <errno.h> from a few files.
Add $FreeBSD$ to a few files in order to pass commitprep.
Approved by: -arch
- Use "OPOST | ONLCR" as a c_oflag in the raw mode instead of 0, which should
make debug output mode readable;
- flush input buffer when switching to/from raw mode. This should prevent
leaking raw scancodes into your shell prompt when program called
VGLKeyboardEnd() w/o processing all scancodes in the buffer.
attempt to read memory when siz is 0
- Clarify comments referring to strlcat() usage
PR: 24278, 24295
Submitted by: Tony Finch <dot@dotat.at>
Richard Kettlewell <rjk@greenend.org.uk>
Reviewed by: -audit
single manual page, appropriately linked, since this removes the
decision of which page the (previously non-existent) sigmask.2
MLINK should point at.
Submitted by: will
supported since it's not easy to put 3 bytes accross 64Kb windows
of memory. This should not be such a problem with linear framebuffers.
There is no major interface modification except that the color type
becomes u_long instead of byte. So one just need to recompile his
application.
Approved by: Soren Schmidt <sos@freebsd.dk>
- errno is already set to ENOMEM (as appropriate) when asprintf(),
strdup(), or acl_init() fails
o acl_to_text.c:
- the return value of the initial strdup() is not checked
- errno is already set to ENOMEM (as appropriate) when asprintf
and acl_init() fails
- let the the default: case use 'goto error_label' for consistency
Submitted by: jedgar
Rather than have a separate (misnamed) FTP_ANONYMOUS_PASSWORD constant, use
FTP_ANONYMOUS_USER (i.e. "anonymous") to construct the anonymous ftp password
if getlogin() fails.
- The stack was getting smashed by __grow_type_table()
- reallocf() was being called with the wrong pointer
- The maximum argument number was being incorrectly computed
PR: misc/23521
non-threaded programs. This provides threaded programs with the
needed exception frame symbols.
parts submitted by: Max Khon <fjoe@iclub.nsu.ru>
PR: 23252
non-threaded programs. This provides threaded programs with the
needed exception frame symbols.
parts submitted by: Max Khon <fjoe@iclub.nsu.ru>
PR: 23252
referenced to by libgcc.a.
This is needed when linking statically as SVR4 (ie, ELF) behavior is to only
link in a module if it satisfies an undefined strong reference from somewhere.
(this surprises a lot of people) Things are different when using shared libs,
the entire library and its modules and their symbols are available at run-time
(when the weak reference is seen to still be unsatisfied and is satisfied on
the spot), this is not the case with static libs.
Thus one can have a static binary with unresolved week references, and at
run-time dereference a NULL pointer.
Submitted by: eischen
interface was based on a draft version of POSIX whereas the final
(1996) version of POSIX specified that the error is returned.
While I'm here, fix getlogin_r so that it works for more than just
the first time it's called.
Reviewed by: wes, wollman (man page)
Submitted by: "Peter Avalos" <pavalos@theshell.com>
Reviewed by: /sbin/md5 [*]
[*] This line appears courtesy of Mr. Warner Losch, all rights reversed.
quitting every time. The way to free a CIRCLEQ was to loop until
the current == current->head, but the way to free a TAILQ is to loop
until current->head == NULL.
In any case, the CORRECT way to do it is a loop of TAILQ_EMPTY() checks
and TAILQ_REMOVE()al of TAILQ_FIRST(). This bug wouldn't have happened
if the loop wasn't hard-coded...
There may be more bugs of this type from the conversion.
so I am backing it out for now. The problem is that some random program
calling crypt() could be passing a DES salt and the crypt(3) library
would encrypt it in md5 mode and there would be a password mismatch as a
result. I wrote a validater function for the DES code to verify that
a salt is valid for DES, but I realized there were too many strange things
to go wrong. passwd(1), pw(8) etc still generate md5 passwords by default
for /etc/master.passwd, so this is almost academic. It is a big deal for
things that have their own crypt(3)-ed password strings (.htaccess,
etc etc). Those are the things I do not want to break.
My DES salt recognizer basically checked if the salt was either 2 or
13 characters long, or began with '_' (_PASSWORD_EFMT1). I think it
would have worked but I have seen way too much crypt() mishandling
in the past.
one-way hash functions for authentication purposes. There is no more
"set the libcrypt->libXXXcrypt" nightmare.
- Undo the libmd.so hack, use -D to hide the md5c.c internals.
- Remove the symlink hacks in release/Makefile
- the algorthm is set by set_crypt_format() as before. If this is
not called, it tries to heuristically figure out the hash format, and
if all else fails, it uses the optional auth.conf entry to chose the
overall default hash.
- Since source has non-hidden crypto in it there may be some issues with
having the source it in some countries, so preserve the "secure/*"
division. You can still build a des-free libcrypt library if you want
to badly enough. This should not be a problem in the US or exporting
from the US as freebsd.org had notified BXA some time ago. That makes
this stuff re-exportable by anyone.
- For consistancy, the default in absence of any other clues is md5. This
is to try and minimize POLA across buildworld where folk may suddenly
be activating des-crypt()-hash support. Since the des hash may not
always be present, it seemed sensible to make the stronger md5 algorithm
the default.
All things being equal, no functionality is lost.
Reviewed-by: jkh
(flame-proof suit on)
global time of day. This costs us nothing, but is a bit of a hack
to work around a process blocking and not having the time updated
by an ITIMER_PROF signal.
PR: 23679
present, this is limited to turning on the packet option if any of
disk slices begin above cylinder 1023. The effect of this change
should therefore be to automatically enable LBA support, as needed,
when installing FreeBSD.
Something-of-the-kind-requested-by: peter
no longer contains kernel specific data structures, but rather
only scalar values and structures that are already part of the
kernel/user interface, specifically rusage and rtprio. It no
longer contains proc, session, pcred, ucred, procsig, vmspace,
pstats, mtx, sigiolst, klist, callout, pasleep, or mdproc. If
any of these changed in size, ps, w, fstat, gcore, systat, and
top would all stop working. The new structure has over 200 bytes
of unassigned space for future values to be added, yet is nearly
100 bytes smaller per entry than the structure that it replaced.
identification and descriptions of most capabilities, current inheritence
rules, etc. More to follow.
Reviewed by: sheldonh
Obtained from: TrustedBSD Project
member f_devdata to be a pointer to a socket number. When currdev
is "pxe", that assumption is correct. When currdev is "disk*", that
assumption is incorrect.
Submitted by: Jim Browne <jbrowne@jbrowne.com>
and had libfetch selecting passive mode even when FTP_PASSIVE_MODE was not
set at all, which is really quite surprising unless you know about it. So
change it to the agreed default behaviour of selecting passive mode if
FTP_PASSIVE_MODE is set, but not "no".
telldir positions. This will allow (future) locking on a
per-DIR basis (for MT-safety). For now, this change does
the following:
o Remove the hash table from telldir.c. Recode to use queue
macros.
o Remove 'const' from 'telldir(const DIR *)'.
o Remove 'register' variables as suggested in a recent
thread.
No response from: -current
