to what other arches (all except riscv and armv4/5) do.
Submitted by: Hyun Hwang <hyun@caffeinated.codes>
Differential Revision: https://reviews.freebsd.org/D14465
After the auth key is copied into the ipad[] array, any remaining bytes
are cleared to zero (in case the key is shorter than one block size).
The full block size was used as the length of the zero rather than the
size of the remaining ipad[]. In practice this overflow was harmless as
it could only clear bytes in the following opad[] array which is
initialized with a copy of ipad[] in the next statement.
Sponsored by: Chelsio Communications
The parameters describe how much of the adapter's memory is reserved for
storing TLS keys. The 'meminfo' sysctl now lists this region of adapter
memory as 'TLS keys' if present.
Sponsored by: Chelsio Communications
* If compiled with EXT_RESOURCES look up the "biu" and "ciu" clocks in
the DT
* Don't use custom property "bus-frequency" but the standard one
"clock-frequency"
* Use the DT property max-frequency and fall back to 200Mhz if it don't exists
* Add more mmc caps suported by the controller
* Always ack all interrupts
* Subclassed driver can supply an update_ios so they can handle update
the clocks accordingly
* Take care of the DDR bit in update_ios (no functional change since we
do not support voltage change for now)
* Make use of the FDT bus-width property
* rk_cru is a cru driver that needs to be subclassed by
the real CRU driver
* rk_clk_pll handle the pll type clock on RockChip SoC, it's only read
only for now.
* rk_clk_composite handle the different composite clock types (with gate,
with mux etc ...)
* rk_clk_gate handle the RockChip gates
* rk_clk_mux handle the RockChip muxes (unused for now)
* Only clocks for supported devices are supported for now, the rest will be
added when driver support comes
* The assigned-clock* property are not handled for now so we rely a lot on the
bootloader to setup some initial values for some clocks.
A memory leak in syslogd for processing of forward actions was
reported. This modification adapts the patch submitted with that bug
to fix the leak. While testing the modification, another leak was also
found and fixed.
PR: 198385
Submitted by: Sreeram <sreeramabs@yahoo.com>
Reported by: Sreeram <sreeramabs@yahoo.com>
Reviewed by: hrs
MFC after: 1 week
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D14510
providing more space for a local buildworld to succeed without
attaching separate disks for /usr/src and /usr/obj.
Reported by: mckusick
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Unlike the existing GLA2GPA ioctl, GLA2GPA_NOFAULT does not modify
the guest. In particular, it does not inject any faults or modify
PTEs in the guest when performing an address space translation.
This is used by bhyve's debug server to read and write memory for
the remote debugger.
Reviewed by: grehan
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D14075
`iconv_sysctl_add` from `sys/libkern/iconv.c` incorrectly limits the
size of user strings, such that several out of bounds reads could have
been possible.
static int
iconv_sysctl_add(SYSCTL_HANDLER_ARGS)
{
struct iconv_converter_class *dcp;
struct iconv_cspair *csp;
struct iconv_add_in din;
struct iconv_add_out dout;
int error;
error = SYSCTL_IN(req, &din, sizeof(din));
if (error)
return error;
if (din.ia_version != ICONV_ADD_VER)
return EINVAL;
if (din.ia_datalen > ICONV_CSMAXDATALEN)
return EINVAL;
if (strlen(din.ia_from) >= ICONV_CSNMAXLEN)
return EINVAL;
if (strlen(din.ia_to) >= ICONV_CSNMAXLEN)
return EINVAL;
if (strlen(din.ia_converter) >= ICONV_CNVNMAXLEN)
return EINVAL;
...
Since the `din` struct is directly copied from userland, there is no
guarantee that the strings supplied will be NULL terminated. The
`strlen` calls could continue reading past the designated buffer
sizes.
Declaration of `struct iconv_add_in` is found in `sys/sys/iconv.h`:
struct iconv_add_in {
int ia_version;
char ia_converter[ICONV_CNVNMAXLEN];
char ia_to[ICONV_CSNMAXLEN];
char ia_from[ICONV_CSNMAXLEN];
int ia_datalen;
const void *ia_data;
};
Our strings are followed by the `ia_datalen` member, which is checked
before the `strlen` calls:
if (din.ia_datalen > ICONV_CSMAXDATALEN)
Since `ICONV_CSMAXDATALEN` has value `0x41000` (and is `unsigned`),
this ensures that `din.ia_datalen` contains at least 1 byte of 0, so
it is not possible to trigger a read out of bounds of the `struct`
however, this code is fragile and could introduce subtle bugs in the
future if the `struct` is ever modified.
PR: 207302
Submitted by: CTurt <cturt@hardenedbsd.org>
Reported by: CTurt <cturt@hardenedbsd.org>
Reviewed by: jhb, vangyzen
MFC after: 1 week
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D14521
Current timeout behavior is to progress in timeout values from MINTMO to
MAXTMO in MINTMO steps before finally timing out. This results in a fairly
long time before operations finally timeout, which may not be ideal for some
use-cases.
Add MAXWAIT that may be configured along with MINTMO/MAXTMO. If we attempt
to start our send/recv cycle over again but MAXWAIT > 0 and MAXWAIT seconds
have already passed, then go ahead and timeout.
This is intended for those that just want to say "timeout after 180 seconds"
rather than calculate and tweak MINTMO/MAXTMO to get their desired timeout.
The default is 0, or "progress from MINTMO to MAXTMO with no exception."
This has been modified since review to allow for it to be defined via CFLAGS
and doing appropriate error checking. Future work may add some Makefile foo
to respect LOADER_NET_MAXWAIT if it's specified in the environment and pass
it in as MAXWAIT accordingly.
Reviewed by: imp, sbruno, tsoome (all previous version)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D14389
This is motivated by a want to reduce heap usage if the menu is being
skipped. Currently, the menu module must be loaded regardless of whether
it's being skipped or not, which adds a cool ~50-100KB worth of memory
usage.
Move the menu skip logic out to core (and remove a debug print), then check
in loader.lua if we should be skipping the menu and avoid loading the menu
module entirely if so. This keeps our memory usage below ~115KB for a boot
with the menu stripped.
Also worth noting: with this change, we no longer explicitly invoke autoboot
if we're skipping the menu. Instead, we let the standard loader behavior
apply: try to autoboot if we need to, then drop to a loader prompt if not or
if the autoboot sequence is interrupted. The only thing we still handle
before dropping to the loader autoboot sequence is loadelf(), so that we can
still apply any of our kernel loading behavior.
libfdt now provides methods to iterate through subnodes and properties in a
convenient fashion.
Replace our ofw_fdt_{peer,child} searches with calls to their corresponding
libfdt methods. Rework ofw_fdt_nextprop to use the
fdt_for_each_property_offset macro, making it even more obvious what it's
doing.
No functional change intended.
Reviewed by: nwhitehorn
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D14225
We can reach that point with IRQs disabled, and calling ast() with IRQs
disabled can lead to a deadlock.
This should fix the freezes on arm64 under load.
Reviewed by: andrew
camelCase tends to be preferred for function identifiers, while
internal_underscores are preferred for variable identifiers. This convention
makes it a little bit easier to eyeball whether variable/function usage is
correct.
The optional commas for final table values are preferred to reduce chances
for error.
While it's a work in progress, at least, I would like a chance to review any
lua that goes into the tree for lualoader. I am also willing to help others
get started writing features or fixing any bugs wandered across.
screen was also guilty of not-so-great argument names, but it was also
guilty of handling color sequences on its own. Change those bits to using
the color module instead.
As a side note, between color and screen, I'm not 100% sure that returning
the color_value is the right thing to do if we won't generate the escape
sequences. This should be re-evaluated at a later time, and they should
likely return nil instead.
Instead of a single-letter parameter ('m'), use something a little more
descriptive and meaningful: 'menudef' ("menu definition") -- these functions
expect to be passed a menudef, so call it what it is.
While here, throw an assertion in that we have a handler for the selected
menu item. This is more of a debugging aide so that it's more obvious when
one is testing a menudef that they've added an entry item that we don't
handle.
This is an improvement over the past behavior of ignoring the unknown menu
entry.
Remove almost all of the _load=XXX options (kept only those relevant
to splash screens, since there were other settings).
Remove the excessively cutesy comment blocks.
Remove excessive comments and replace with similar content
Remove gratuitous blank lines (while leaving some)
We have too many modules to list them all here. There's no purpose in
doing so and it's a giant hassle to maintain. In addition the extra
~500 lines slow this down on small platforms. It slowed it down
so much small platforms forked, which caused other issues...
This is a compromise between those two extremes.
We really only need one loader.conf. The other loader.conf was created
because the current one took forever to parse in FORTH. That will be
fixed in the next commit.
For directories that don't many anything, add NO_OBJ=t just before we
include bsd.init.mk. This prevents them from creating an OBJ
directory. In addition, prevent defs.mk from creating the machine
related links in these cases. They aren't needed and break, at least
on stable, the read-only src tree build.
The conditional compilation support is now centralized in
tcp_fastopen.h and tcp_var.h. This doesn't provide the minimum
theoretical code/data footprint when TCP_RFC7413 is disabled, but
nearly all the TFO code should wind up being removed by the optimizer,
the additional footprint in the syncache entries is a single pointer,
and the additional overhead in the tcpcb is at the end of the
structure.
This enables the TCP_RFC7413 kernel option by default in amd64 and
arm64 GENERIC.
Reviewed by: hiren
MFC after: 1 month
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D14048
[RFC7413]. It also includes a pre-shared key mode of operation in
which the server requires the client to be in possession of a shared
secret in order to successfully open TFO connections with that server.
The names of some existing fastopen sysctls have changed (e.g.,
net.inet.tcp.fastopen.enabled -> net.inet.tcp.fastopen.server_enable).
Reviewed by: tuexen
MFC after: 1 month
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D14047
The keylist lock was not being acquired early enough. The only side
effect of this bug is that the effective add time of a new key could
be slightly later than it would have been otherwise, as seen by a TFO
client.
Reviewed by: tuexen
MFC after: 1 month
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D14046
+ Add missing signals SIGTHR (32) and SIGLIBRT (33)
+ Add inline for converting SIG* int to string
+ Add inline for converting CLD_* int to string
Reviewed by: markj
Sponsored by: Smule, Inc.
Differential Revision: https://reviews.freebsd.org/D14497
This allows working with custom cross toolchains without the need to
create files in /usr/local/share/toolchains.
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14178
exist. This behaviour makes no sense for eg USB serial adapters, or
USB device-side serial templates.
This mostly reverts to pre-r135941 behaviour.
Reviewed by: imp@
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D14198
the Server Base System Architecture to be a subset of the pl011 r1p5. As
we don't use the removed features it is safe to just attach to the existing
driver as is.
Sponsored by: DARPA, AFRL
