use was removed in r173592 (Nov 2007), yet Xen PV bits continued
referencing the privatespace structure, and were removed in r282274
(Apr 2015).
Discussed with: jhb
Sponsored by: The FreeBSD Foundation
use vtophys() directly instead of vtomach() and retire the no-longer-used
headers <machine/xenfunc.h> and <machine/xenvar.h>.
Reported by: bde (stale bits in <machine/xenfunc.h>)
Reviewed by: royger (earlier version)
Differential Revision: https://reviews.freebsd.org/D3266
vm_offset_t pmap_quick_enter_page(vm_page_t m)
void pmap_quick_remove_page(vm_offset_t kva)
These will create and destroy a temporary, CPU-local KVA mapping of a specified page.
Guarantees:
--Will not sleep and will not fail.
--Safe to call under a non-sleepable lock or from an ithread
Restrictions:
--Not guaranteed to be safe to call from an interrupt filter or under a spin mutex on all platforms
--Current implementation does not guarantee more than one page of mapping space across all platforms. MI code should not make nested calls to pmap_quick_enter_page.
--MI code should not perform locking while holding onto a mapping created by pmap_quick_enter_page
The idea is to use this in busdma, for bounce buffer copies as well as virtually-indexed cache maintenance on mips and arm.
NOTE: the non-i386, non-amd64 implementations of these functions still need review and testing.
Reviewed by: kib
Approved by: kib (mentor)
Differential Revision: http://reviews.freebsd.org/D3013
overflows the stack during root mount in some configurations.
Tested by: Fabian Keil <freebsd-listen@fabiankeil.de> (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
reported, on APs. We already did this on BSP.
Otherwise, the userspace software which depends on the features
reported by the high CPUID levels is misbehaving. In particular, AVX
detection is non-functional, depending on which CPU thread happens to
execute when doing CPUID. Another victim is the libthr signal
handlers interposer, which needs to save full FPU extended state.
Reported and tested by: Andre Meiser <ortadur@web.de>
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
i386/include/frame.h after a code was moved from machdep.c to frame.h
in r284925.
Use include guards style similar to other guards.
Noted by: bde
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
provide a semantic defined by the C11 fences with corresponding
memory_order.
atomic_thread_fence_acq() gives r | r, w, where r and w are read and
write accesses, and | denotes the fence itself.
atomic_thread_fence_rel() is r, w | w.
atomic_thread_fence_acq_rel() is the combination of the acquire and
release in single operation. Note that reads after the acq+rel fence
could be made visible before writes preceeding the fence.
atomic_thread_fence_seq_cst() orders all accesses before/after the
fence, and the fence itself is globally ordered against other
sequentially consistent atomic operations.
Reviewed by: alc
Discussed with: bde
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
macros on amd64 and i386. Move the definition to machine/param.h.
kgdb defines INKERNEL() too, the conflict is resolved by renaming kgdb
version to PINKERNEL().
On i386, correct the lowest kernel address. After the shared page was
introduced, USRSTACK no longer points to the last user address + 1 [*]
Submitted by: Oliver Pinter [*]
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
restore the FPU state from the format of machine FSAVE area. The
intended use is for ABI emulators to provide FSAVE-formatted FPU state
to usermode requiring it, while kernel could use FXSAVE due to
XMM/XSAVE.
The core functionality to convert from/to FXSAVE format is shared with
the fill_fpregs_xmm() and set_fpregs_xmm(). Move the later functions
to npx.c and rename them to npx_fill_fpregs_xmm() and
npx_set_fpregs_xmm(). They differ from nptx_get/set_fsave(9) since
our mcontext contains padding to be zeroed or ignored.
fill_fpregs() and set_fpregs() could be converted to use the new
interface, but there are small differences to handle.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
atomic_load_acq(9), on it source, for x86.
Right now, atomic_load_acq() on x86 is sequentially consistent with
other atomics, code ensures this by doing store/load barrier by
performing locked nop on the source. Provide separate primitive
__storeload_barrier(), which is implemented as the locked nop done on
a cpu-private variable, and put __storeload_barrier() before load, to
keep seq_cst semantic but avoid introducing false dependency on the
no-modification of the source for its later use.
Note that seq_cst property of x86 atomic_load_acq() is not documented
and not carried by atomics implementations on other architectures,
although some kernel code relies on the behaviour. This commit does
not intend to change this.
Reviewed by: alc
Discussed with: bde
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
While here, also report %eflags from the i386 trapframe.
Differential Revision: https://reviews.freebsd.org/D2743
Reviewed by: kib
Obtained from: 1 month
trapframes are cleared by explicitly pushing a zero and then moving
the segment register into the low 16 bits. Certain Intel processors
treat a push of a segment register as a move of the segment register
into the low 16 bits leaving the upper 16 bits of the word in the
stack unchanged.
Reviewed by: kib
MFC after: 1 month
rev. 55. The modern CPUs cache and TLB descriptions looked quite
questionable without the update, e.g. Haswell i7 4770S reported:
Data TLB: 4 KB pages, 4-way set associative, 64 entries
L2 cache: 256 kbytes, 8-way associative, 64 bytes/line
After the update, the report is:
Data TLB: 1 GByte pages, 4-way set associative, 4 entries
Data TLB: 4 KB pages, 4-way set associative, 64 entries
Instruction TLB: 2M/4M pages, fully associative, 8 entries
Instruction TLB: 4KByte pages, 8-way set associative, 64 entries
64-Byte prefetching
Shared 2nd-Level TLB: 4 KByte/2MByte pages, 8-way associative, 1024 entries
L2 cache: 256 kbytes, 8-way associative, 64 bytes/line
Some tags were apparently removed from the table 3-21, Vol. 2A. Keep
them around, but add a comment stating the removal.
Update the format line for cpu_stdext_feature according to the bits
from the SDM rev.55. It appears that Haswells do not store %cs and
%ds values in the FPU save area.
Store content of the %ecx register from the CPUID leaf 0x7
subleaf 0 as cpu_stdext_feature2 and print defined bits from it,
again acording to SDM rev. 55.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
interacts with interrupts, query ACPI and use MWAIT for entrance into
Cx sleep states. Support C1 "I/O then halt" mode. See Intel'
document 302223-007 "Intelб╝ Processor Vendor-Specific ACPI Interface
Specification" for description.
Move the acpi_cpu_c1() function into x86/cpu_machdep.c and use
it instead of inlining "sti; hlt" sequence in several places.
In the acpi(4) man page, besides documenting the dev.cpu.N.cx_methods
sysctl, correct the names for dev.cpu.N.{cx_usage,cx_lowest,cx_supported}
sysctls.
Both jkim and avg have some other patches implementing the mwait
functionality; this work is unrelated. Linux does not rely on the
ACPI to provide correct tables describing Cx modes. Instead, the
driver has pre-defined knowledge of the CPU models, it was supplied by
Intel.
Tested by: pho (previous versions)
Sponsored by: The FreeBSD Foundation
remains. Xen is planning to phase out support for PV upstream since it
is harder to maintain and has more overhead. Modern x86 CPUs include
virtualization extensions that support HVM guests instead of PV guests.
In addition, the PV code was i386 only and not as well maintained recently
as the HVM code.
- Remove the i386-only NATIVE option that was used to disable certain
components for PV kernels. These components are now standard as they
are on amd64.
- Remove !XENHVM bits from PV drivers.
- Remove various shims required for XEN (e.g. PT_UPDATES_FLUSH, LOAD_CR3,
etc.)
- Remove duplicate copy of <xen/features.h>.
- Remove unused, i386-only xenstored.h.
Differential Revision: https://reviews.freebsd.org/D2362
Reviewed by: royger
Tested by: royger (i386/amd64 HVM domU and amd64 PVH dom0)
Relnotes: yes
sys/amd64/amd64/mp_machdep.c, to the new common x86 source
sys/x86/x86/mp_x86.c.
Proposed and reviewed by: jhb
Review: https://reviews.freebsd.org/D2347
Sponsored by: The FreeBSD Foundation
sys/i386/i386/machdep.c to new file sys/x86/x86/cpu_machdep.c. Most
of the code is related to the idle handling.
Discussed with: pluknet
Sponsored by: The FreeBSD Foundation
shows no difference with the code removed.
On both amd64 and i386, assert that a released pmap is not active.
Proposed and reviewed by: alc
Discussed with: Svatopluk Kraus <onwahe@gmail.com>, peter
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
use PAE format for the page tables, but does not incur other
consequences of the full PAE config. In particular, vm_paddr_t and
bus_addr_t are left 32bit, and max supported memory is still limited
by 4GB.
The option allows to have nx permissions for memory mappings on i386
kernel, while keeping the usual i386 KBI and avoiding the kernel data
sizing problems typical for the PAE config.
Intel documented that the PAE format for page tables is available
starting with the Pentium Pro, but it is possible that the plain
Pentium CPUs have the required support (Appendix H). The goal is to
enable the option and non-exec mappings on i386 for the GENERIC
kernel. Anybody wanting a useful system on 486, have to reconfigure
the modern i386 kernel anyway.
Discussed with: alc, jhb
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
memory itself. Provide the formula to calculate the number of
required page tables. Correct the size of the struct vm_page for
non-PAE case.
Reviewed by: alc, jhb (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
translation. In particular, despite IO-APICs only take 8bit apic id,
IR translation structures accept 32bit APIC Id, which allows x2APIC
mode to function properly. Extend msi_cpu of struct msi_intrsrc and
io_cpu of ioapic_intsrc to full int from one byte.
KPI of IR is isolated into the x86/iommu/iommu_intrmap.h, to avoid
bringing all dmar headers into interrupt code. The non-PCI(e) devices
which generate message interrupts on FSB require special handling. The
HPET FSB interrupts are remapped, while DMAR interrupts are not.
For each msi and ioapic interrupt source, the iommu cookie is added,
which is in fact index of the IRE (interrupt remap entry) in the IR
table. Cookie is made at the source allocation time, and then used at
the map time to fill both IRE and device registers. The MSI
address/data registers and IO-APIC redirection registers are
programmed with the special values which are recognized by IR and used
to restore the IRE index, to find proper delivery mode and target.
Map all MSI interrupts in the block when msi_map() is called.
Since an interrupt source setup and dismantle code are done in the
non-sleepable context, flushing interrupt entries cache in the IR
hardware, which is done async and ideally waits for the interrupt,
requires busy-wait for queue to drain. The dmar_qi_wait_for_seq() is
modified to take a boolean argument requesting busy-wait for the
written sequence number instead of waiting for interrupt.
Some interrupts are configured before IR is initialized, e.g. ACPI
SCI. Add intr_reprogram() function to reprogram all already
configured interrupts, and call it immediately before an IR unit is
enabled. There is still a small window after the IO-APIC redirection
entry is reprogrammed with cookie but before the unit is enabled, but
to fix this properly, IR must be started much earlier.
Add workarounds for 5500 and X58 northbridges, some revisions of which
have severe flaws in handling IR. Use the same identification methods
as employed by Linux.
Review: https://reviews.freebsd.org/D1892
Reviewed by: neel
Discussed with: jhb
Tested by: glebius, pho (previous versions)
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
hw.x2apic_enable tunable allows disabling it from the loader prompt.
To closely repeat effects of the uncached memory ops when accessing
registers in the xAPIC mode, the x2APIC writes to MSRs are preceeded
by mfence, except for the EOI notifications. This is probably too
strict, only ICR writes to send IPI require serialization to ensure
that other CPUs see the previous actions when IPI is delivered. This
may be changed later.
In vmm justreturn IPI handler, call doreti_iret instead of doing iretd
inline, to handle corner conditions.
Note that the patch only switches LAPICs into x2APIC mode. It does not
enables FreeBSD to support > 255 CPUs, which requires parsing x2APIC
MADT entries and doing interrupts remapping, but is the required step
on the way.
Reviewed by: neel
Tested by: pho (real hardware), neel (on bhyve)
Discussed with: jhb, grehan
Sponsored by: The FreeBSD Foundation
MFC after: 2 months
KVM clock shares the same data structures between the guest and the host
as Xen so it makes sense to just have a single copy of this code.
Differential Revision: https://reviews.freebsd.org/D1429
Reviewed by: royger (eariler version)
MFC after: 1 month
Implement a subset of the multiboot specification in order to boot Xen
and a FreeBSD Dom0 from the FreeBSD bootloader. This multiboot
implementation is tailored to boot Xen and FreeBSD Dom0, and it will
most surely fail to boot any other multiboot compilant kernel.
In order to detect and boot the Xen microkernel, two new file formats
are added to the bootloader, multiboot and multiboot_obj. Multiboot
support must be tested before regular ELF support, since Xen is a
multiboot kernel that also uses ELF. After a multiboot kernel is
detected, all the other loaded kernels/modules are parsed by the
multiboot_obj format.
The layout of the loaded objects in memory is the following; first the
Xen kernel is loaded as a 32bit ELF into memory (Xen will switch to
long mode by itself), after that the FreeBSD kernel is loaded as a RAW
file (Xen will parse and load it using it's internal ELF loader), and
finally the metadata and the modules are loaded using the native
FreeBSD way. After everything is loaded we jump into Xen's entry point
using a small trampoline. The order of the multiboot modules passed to
Xen is the following, the first module is the RAW FreeBSD kernel, and
the second module is the metadata and the FreeBSD modules.
Since Xen will relocate the memory position of the second
multiboot module (the one that contains the metadata and native
FreeBSD modules), we need to stash the original modulep address inside
of the metadata itself in order to recalculate its position once
booted. This also means the metadata must come before the loaded
modules, so after loading the FreeBSD kernel a portion of memory is
reserved in order to place the metadata before booting.
In order to tell the loader to boot Xen and then the FreeBSD kernel the
following has to be added to the /boot/loader.conf file:
xen_cmdline="dom0_mem=1024M dom0_max_vcpus=2 dom0pvh=1 console=com1,vga"
xen_kernel="/boot/xen"
The first argument contains the command line that will be passed to the Xen
kernel, while the second argument is the path to the Xen kernel itself. This
can also be done manually from the loader command line, by for example
typing the following set of commands:
OK unload
OK load /boot/xen dom0_mem=1024M dom0_max_vcpus=2 dom0pvh=1 console=com1,vga
OK load kernel
OK load zfs
OK load if_tap
OK load ...
OK boot
Sponsored by: Citrix Systems R&D
Reviewed by: jhb
Differential Revision: https://reviews.freebsd.org/D517
For the Forth bits:
Submitted by: Julien Grall <julien.grall AT citrix.com>
Features by CPUID as CPUID.80000008H:EAX[7:0], into variable cpu_maxphyaddr.
Reviewed by: alc
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
code in sys/kern/kern_dump.c. Most dumpsys() implementations are nearly
identical and simply redefine a number of constants and helper subroutines;
a generic implementation will make it easier to implement features around
kernel core dumps. This change does not alter any minidump code and should
have no functional impact.
PR: 193873
Differential Revision: https://reviews.freebsd.org/D904
Submitted by: Conrad Meyer <conrad.meyer@isilon.com>
Reviewed by: jhibbits (earlier version)
Sponsored by: EMC / Isilon Storage Division
It is automatically set when -fPIC is passed to the compiler.
Reviewed by: dim, kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D1179
on i386 PAE. Previously, VM_PHYSSEG_SPARSE could not be used on amd64 and
i386 because vm_page_startup() would not create vm_page structures for the
kernel page table pages allocated during pmap_bootstrap() but those vm_page
structures are needed when the kernel attempts to promote the corresponding
kernel virtual addresses to superpage mappings. To address this problem, a
new public function, vm_phys_add_seg(), is introduced and vm_phys_init() is
updated to reflect the creation of vm_phys_seg structures by calls to
vm_phys_add_seg().
Discussed with: Svatopluk Kraus
MFC after: 3 weeks
Sponsored by: EMC / Isilon Storage Division
support for AVX on i386.
- Similar to amd64, move the FPU save area out of the PCB and instead
store saved FPU state in a variable-sized buffer after the PCB on the
stack.
- To support the variable PCB location, alter the locore code to only use
the bottom-most page of proc0stack for init386(). init386() returns
the correct stack pointer to locore which adjusts the stack for thread0
before calling mi_startup().
- Don't bother setting cr3 in thread0's pcb in locore before calling
init386(). It wasn't used (init386() overwrote it at the end) and
it doesn't work with the variable-sized FPU save area.
- Remove the new-bus attachment from npx. This was only ever useful for
external co-processors using IRQ13, but those have not been supported
for several years. npxinit() is now called much earlier during boot
(init386()) similar to amd64.
- Implement PT_{GET,SET}XSTATE and I386_GET_XFPUSTATE.
- npxsave() is now only called from context switch contexts so it can
use XSAVEOPT.
Differential Revision: https://reviews.freebsd.org/D1058
Reviewed by: kib
Tested on: FreeBSD/i386 VM under bhyve on Intel i5-2520
- Move the existing code to x86/x86/identcpu.c since it is x86-specific.
- If the CPUID2_HV flag is set, assume a hypervisor is present and query
the 0x40000000 leaf to determine the hypervisor vendor ID. Export the
vendor ID and the highest supported hypervisor CPUID leaf via
hv_vendor[] and hv_high variables, respectively. The hv_vendor[]
array is also exported via the hw.hv_vendor sysctl.
- Merge the VMWare detection code from tsc.c into the new probe in
identcpu.c. Add a VM_GUEST_VMWARE to identify vmware and use that in
the TSC code to identify VMWare.
Differential Revision: https://reviews.freebsd.org/D1010
Reviewed by: delphij, jkim, neel
This device is only attached to priviledged domains, and allows the
toolstack to interact with Xen. The two functions of the privcmd
interface is to allow the execution of hypercalls from user-space, and
the mapping of foreign domain memory.
Sponsored by: Citrix Systems R&D
i386/include/xen/hypercall.h:
amd64/include/xen/hypercall.h:
- Introduce a function to make generic hypercalls into Xen.
xen/interface/xen.h:
xen/interface/memory.h:
- Import the new hypercall XENMEM_add_to_physmap_range used by
auto-translated guests to map memory from foreign domains.
dev/xen/privcmd/privcmd.c:
- This device has the following functions:
- Allow user-space applications to make hypercalls into Xen.
- Allow user-space applications to map memory from foreign domains,
this is accomplished using the newly introduced hypercall
(XENMEM_add_to_physmap_range).
xen/privcmd.h:
- Public ioctl interface for the privcmd device.
x86/xen/hvm.c:
- Remove declaration of hypercall_page, now it's declared in
hypercall.h.
conf/files:
- Add the privcmd device to the build process.
forced invalidation of the cache range regardless of the presence of
self-snoop feature. Some recent Intel GPUs in some modes are not
coherent, and dirty lines in CPU cache must be flushed before the
pages are transferred to GPU domain.
Reviewed by: alc (previous version)
Tested by: pho (amd64)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
AP startup and AP resume (it was already used for BSP startup and BSP
resume).
- Split code to do one-time probing of cache properties out of
initializecpu() and into initializecpucache(). This is called once on
the BSP during boot.
- Move enable_sse() into initializecpu().
- Call initializecpu() for AP startup instead of enable_sse() and
manually frobbing MSR_EFER to enable PG_NX.
- Call initializecpu() when an AP resumes. In theory this will now
properly re-enable PG_NX in MSR_EFER when resuming a PAE kernel on
APs.
the local APIC in initializecpu() and re-enables it if the APIC code
decides to use the local APIC after all. Rework this workaround
slightly so that initializecpu() won't re-disable the local APIC if
it is called after the APIC code re-enables the local APIC.
