IGMPMSG_WHOLEPKT notifications to the userland PIM routing daemon,
as an optimization to mitigate the effects of high multicast
forwarding load.
This is an experimental change, therefore it must be explicitly enabled by
setting the sysctl/tunable net.inet.pim.squelch_wholepkt to a non-zero value.
The tunable may be set from the loader or from within the kernel environment
when loading ip_mroute.ko as a module.
Submitted by: edrt <edrt at citiz.net>
See also: http://mailman.icsi.berkeley.edu/pipermail/xorp-users/2005-June/000639.html
Make PIM dynamically loadable by using encap_attach_func().
PIM may now be loaded into a GENERIC kernel.
Tested with: ports/net/pimdd && tcpreplay && wireshark
Reviewed by: Pavlin Radoslavov
by the token bucket filter will result in EINVAL being returned.
If you want to rate-limit traffic in future, use ALTQ or dummynet; this
isn't a general purpose QoS engine.
Preserve the now unused fields in struct vif so as to avoid having to
recompile netstat(1) and other tools.
Reviewed by: Pavlin Radslavov, Bill Fenner
never used them; with mrouted, their functionality may be replaced by
explicitly configuring gif(4) instances and specifying them with the
'phyint' keyword.
Bump __FreeBSD_version to 700030, and update UPDATING.
A doc update is forthcoming.
Discussed on: net
Reviewed by: fenner
MFC after: 3 months
socket option TCP_INFO.
Note that the units used in the original Linux API are in microseconds,
so use a 64-bit mantissa to convert FreeBSD's internal measurements
from struct tcpcb from ticks.
multicast memberships, when interface is detached. Thus, when
an underlying interface is detached, we do not need to free
our multicast memberships.
Reviewed by: bms
Normally the socket buffers are static (either derived from global
defaults or set with setsockopt) and do not adapt to real network
conditions. Two things happen: a) your socket buffers are too small
and you can't reach the full potential of the network between both
hosts; b) your socket buffers are too big and you waste a lot of
kernel memory for data just sitting around.
With automatic TCP send and receive socket buffers we can start with a
small buffer and quickly grow it in parallel with the TCP congestion
window to match real network conditions.
FreeBSD has a default 32K send socket buffer. This supports a maximal
transfer rate of only slightly more than 2Mbit/s on a 100ms RTT
trans-continental link. Or at 200ms just above 1Mbit/s. With TCP send
buffer auto scaling and the default values below it supports 20Mbit/s
at 100ms and 10Mbit/s at 200ms. That's an improvement of factor 10, or
1000%. For the receive side it looks slightly better with a default of
64K buffer size.
New sysctls are:
net.inet.tcp.sendbuf_auto=1 (enabled)
net.inet.tcp.sendbuf_inc=8192 (8K, step size)
net.inet.tcp.sendbuf_max=262144 (256K, growth limit)
net.inet.tcp.recvbuf_auto=1 (enabled)
net.inet.tcp.recvbuf_inc=16384 (16K, step size)
net.inet.tcp.recvbuf_max=262144 (256K, growth limit)
Tested by: many (on HEAD and RELENG_6)
Approved by: re
MFC after: 1 month
upper-bounding it to the size of the initial socket buffer lower-bound it
to the smallest MSS we accept. Ideally we'd use the actual MSS information
here but it is not available yet.
For socket buffer auto sizing to be effective we need room to grow the
receive window. The window scale shift is determined at connection setup
and can't be changed afterwards. The previous, original, method effectively
just did a power of two roundup of the socket buffer size at connection
setup severely limiting the headroom for larger socket buffers.
Tested by: many (as part of the socket buffer auto sizing patch)
MFC after: 1 month
This is not a functional change.
IN_LINKLOCAL() tests if an address falls within the IPv4 link-local prefix.
IN_PRIVATE() tests if an address falls within an RFC 1918 private prefix.
IN_LOCAL_GROUP() tests if an address falls within the statically assigned
link-local multicast scope specified in RFC 2365.
IN_ANY_LOCAL() tests for either of IN_LINKLOCAL() or IN_LOCAL_GROUP().
As with the existing macros in the FreeBSD netinet stack, comparisons
are performed in host-byte order.
See also: RFC 1918, RFC 2365, RFC 3927
Obtained from: NetBSD (dyoung@)
MFC after: 2 weeks
carp_clone_destroy() we are on a safe side, we don't need to
unlock the cif, that can me already non-existent at this point.
Reported by: Anton Yuzhaninov <citrin rambler-co.ru>
- Finally all splxx() are removed
- Count error fixed in mapping array which might
cause a wrong cumack generation.
- Invariants around panic for case D + printf when no invariants.
- one-to-one model race condition fixed by using
a pre-formed connection and then completing the
work so accept won't happen on a non-formed
association.
- Some additional paranoia checks in sctp_output.
- Locks that were missing in the accept code.
Approved by: gnn
- Added a short time wait (not used yet) constant
- Corrected the type of the crc32c table (it was
unsigned long and really is a uint32_t
- Got rid of the user of MHeaders until they
are truely needed by lower layers.
- Fixed an initialization problem in the readq structure
(ordering was off).
- Found yet another collision bug when the random number
generator returns two numbers on one side (during a collision)
that are the same. Also added some tracking of cookies
that will go away when we know that we have the last collision
bug gone.
- Fixed an init bug for book_size_scale, that was causing
Early FR code to run when it should not.
- Fixed a flight size tracking bug that was associated with
Early FR but due to above bug also effected all FR's
- Fixed it so Max Burst also will apply to Fast Retransmit.
- Fixed a bug in the temporary logging code that allowed a
static log array overflow
- hashinit_flags is now used.
- Two last mcopym's were converted to the macro sctp_m_copym that
has always been used by all other places
- macro sctp_m_copym was converted to upper case.
- We now validate sinfo_flags on input (we did not before).
- Fixed a bug that prevented a user from sending data and immediately
shuting down with one send operation.
- Moved to use hashdestroy instead of free() in our macros.
- Fixed an init problem in our timed_wait vtag where we
did not fully initialize our time-wait blocks.
- Timer stops were re-positioned.
- A pcb cleanup method was added, however this probably will
not be used in BSD.. unless we make module loadable protocols
- I think this fixes the mysterious timer bug.. it was a
ordering of locks problem in the way we did timers. It
now conforms to the timeout(9) manual (except for the
_drain part, we had to do this a different way due
to locks).
- Fixed error return code so we get either CONNREUSED or CONNRESET
depending on where one is in progression
- Purged an unused clone macro.
- Fixed a read erro code issue where we were NOT getting the proper
error when the connection was reset.
- Purged an unused clone macro.
- Fixed a read erro code issue where we were NOT getting the proper
error when the connection was reset.
Approved by: gnn
members right. However, it also said it was aligned(1), which meant
that gcc generated really bad code. Mark this as aligned(4). This
makes things a little faster on arm (a couple percent), but also saves
about 30k on the size of the kernel for arm.
I talked about doing this with bde, but didn't check with him before
the commit, so I'm hesitant say 'reviewed by: bde'.
mbuf. First moves toward being able to cope better with having layer 2 (or
other encapsulation data) before the IP header in the packet being examined.
More commits to come to round out this functionality. This commit should
have no practical effect but clears the way for what is coming.
Revirewed by: luigi, yar
MFC After: 2 weeks
With the second (and last) part of my previous Summer of Code work, we get:
-ipfw's in kernel nat
-redirect_* and LSNAT support
General information about nat syntax and some examples are available
in the ipfw (8) man page. The redirect and LSNAT syntax are identical
to natd, so please refer to natd (8) man page.
To enable in kernel nat in rc.conf, two options were added:
o firewall_nat_enable: equivalent to natd_enable
o firewall_nat_interface: equivalent to natd_interface
Remember to set net.inet.ip.fw.one_pass to 0, if you want the packet
to continue being checked by the firewall ruleset after being
(de)aliased.
NOTA BENE: due to some problems with libalias architecture, in kernel
nat won't work with TSO enabled nic, thus you have to disable TSO via
ifconfig (ifconfig foo0 -tso).
Approved by: glebius (mentor)
access plus timers. This makes the code
more portable and able to change out the
mbuf or timer system used more easily ;-)
b) removal of all use of pkt-hdr's until only
the places we need them (before ip_output routines).
c) remove a bunch of code not needed due to <b> aka
worrying about pkthdr's :-)
d) There was one last reorder problem it looks where
if a restart occur's and we release and relock (at
the point where we setup our alias vtag) we would
end up possibly getting the wrong TSN in place. The
code that fixed the TSN's just needed to be shifted
around BEFORE the release of the lock.. also code that
set the state (since this also could contribute).
Approved by: gnn
o fixed a comment
o made in kernel libalias a bit less verbose (disabled automatic
logging everytime a new link is added or deleted)
Approved by: glebius (mentor)
2) Fix all "magic numbers" to be constants.
3) A collision case that would generate two associations to
the same peer due to a missing lock is fixed.
4) Added tracking of where timers are stopped.
Approved by: gnn
kernel. This LOR snuck in with some of the recent syncache changes. To
fix this, the inpcb handling was changed:
- Hang a MAC label off the syncache object
- When the syncache entry is initially created, we pickup the PCB lock
is held because we extract information from it while initializing the
syncache entry. While we do this, copy the MAC label associated with
the PCB and use it for the syncache entry.
- When the packet is transmitted, copy the label from the syncache entry
to the mbuf so it can be processed by security policies which analyze
mbuf labels.
This change required that the MAC framework be extended to support the
label copy operations from the PCB to the syncache entry, and then from
the syncache entry to the mbuf.
These functions really should be referencing the syncache structure instead
of the label. However, due to some of the complexities associated with
exposing this syncache structure we operate directly on it's label pointer.
This should be OK since we aren't making any access control decisions within
this code directly, we are merely allocating and copying label storage so
we can properly initialize mbuf labels for any packets the syncache code
might create.
This also has a nice side effect of caching. Prior to this change, the
PCB would be looked up/locked for each packet transmitted. Now the label
is cached at the time the syncache entry is initialized.
Submitted by: andre [1]
Discussed with: rwatson
[1] andre submitted the tcp_syncache.c changes
for printing/logging ipv6 addresses.
The caller now has to hand in a sufficiently large buffer as first
argument.
This is the "+ one more change" missed in the original commit.
Noticed by: tinderbox
Pointy hat to: me (#1)
In ip6_sprintf no longer use and return one of eight static buffers
for printing/logging ipv6 addresses.
The caller now has to hand in a sufficiently large buffer as first
argument.
Fixing the IP accounting issue, if we plan to do so, needs to be better
thought out; the 'fix' introduces a hash lookup and a possible kernel panic.
Reported by: Mark Tinguely
marked INP_DROPPED or INP_TIMEWAIT:
o return ECONNRESET instead of EINVAL for close, disconnect, shutdown,
rcvd, rcvoob, and send operations
o return ECONNABORTED instead of EINVAL for accept
These changes should reduce confusion in applications since EINVAL is
normally interpreted to mean an invalid file descriptor. This change
does not conflict with POSIX or other standards I checked. The return
of EINVAL has always been possible but rare; it's become more common
with recent changes to the socket/inpcb handling and with finer-grained
locking and preemption.
Note: there are other instances of EINVAL for this state that were
left unchanged; they should be reviewed.
Reviewed by: rwatson, andre, ru
MFC after: 1 month
We are not yet aware of the protocol internals but this way
SCTP traffic over v6 will not be discarded.
Reported by: Peter Lei via rrs
Tested by: Peter Lei <peterlei cisco.com>
not being aquired. This meant that when we cleanup
the outbound we may have one in transit to be
added with the old sequence number. This is bad
since then we loose a message :(
Also the report_outbound needed to have the right
lock when its called which it did not.. I added
the lock with of course a flag since we want to
have the lock before we call it in the restart
case.
This also fixed the FIX ME case where, in the cookie
collision case, we mark for retransmit any that
were bundled with the cookie that was dropped.
This also means changes to the output routine
so we can assure getting the COOKIE-ACK sent
BEFORE we retransmit the Data.
Approved by: gnn
a colliding INIT. This if fine except when we have
data outstanding... we basically reset it to the
previous value it was.. so then we end up assigning
the same TSN to two different data chunks.
This patch:
1) Finds a missing lock for when we change the stream
numbers during COOKIE and INIT-ACK processing.. we
were NOT locking the send_buffer.. which COULD cause
problems (found by inspection looking for <2>)
2) Fixes a case during a colliding INIT where we incorrectly
reset the sending Sequence thus in some cases duplicately
assigning a TSN.
3) Additional enhancments to logging so we can see strm/tsn in
the receiver AND new tracking to watch what the sender
is doing with TSN and STRM seq's.
Approved by: gnn
We were calling select_a_tag() inside sctp_send_initate_ack().
During collision cases we have a stcb and thus a SCTP_LOCK. When
we call select_a_tag it (below it) locks the INFO lock. We now
1) pre-select the nonce-tie-tags in sctputil.c during setup of
a tcb.
2) In the other case where we have to select tags, we unlock after
incr the ref cnt (so assoc won't go away0 and then do the
tag selection followed by a relock and decr the refcnt.
Approved by: gnn
reset comes in we need to calculate the length and
therefore the number of listed streams (if any) based
on the TLV type. Otherwise if we get a retran we could
in theory panic by sending a notification to a user with
a incorrect list and thus no memory listing the streams.
Found in IOS by devtest :-)
Approved by: gnn
