interrupts. This is a bit harder than it needs to be because there's
more than one way to generate link attentions, at least one of which
does not work on the BCM5700, but does on the 5701.
For the 5701, we can safely use the 'link changed' bit in the status
block, and we enable link change attentions in the mac event register.
For the 5700, we have to use MII interrupts, which require checking
the MAC status register rather than the status block. This requires
doing an extra register access on each interrupt which I'd prefer to
avoid, but them's the breaks. Testing with both a 3c996-T and 3c996B-T
shows that we do in fact detect the link going up and down properly
on cable insertions/disconnections.
Also, avoid twiddling the autopoll enable bit in the MI mode register
when doing a PHY read. I think this coupled with the other changes
will stop the interrupt storms Paul Saab has been harassing me about.
Manually setting the link to 100baseTX full duplex seems to work ok
for me. (I'm typing over the 3c996B-T right now.)
Lastly, teach the driver how to recognize a 3c996B-SX by checking
the hardware config word in the EEPROM in order to detect the media.
We attach 5701 fiber cards correctly now, but I haven't verified that
they send/receive packets yet since I don't have a second fiber
interface at home. (I know that fiber 5700 cards work, so I'm
keeping my fingers crossed.)
This driver was written by Myson and is made available
by their courtesy.
The 5.x version is not fully tested (I will be testing) but
the 4.x version has been tested by many.
I will commit it soon.
Myson have their own chip design based on the DEC 214xx family but
with several differences. Myson sells this chip to several
EOMs in teh Chinese area so there may be many noname brand cards
that respond to this driver. Myson will be supplying a list
of some of these.
We get enough protection from the lock on the individual lists that we
aquire later.
Noticed/Tested by: Steven G. Kargl <kargl@troutmask.apl.washington.edu>
Submitted by: Jonathan Mini <mini@haikugeek.com>
1) Properly detect the Symbol based cards (The 3Com Airconnect and their
ilk) and only reset them *ONCE* ever. This appears to make them work,
but more testing is needed. The tests that would wedge up my machine
completely now appear to work, but I have not real access points
handy.
2) Report both the Station firmware and the Primary firmware on Prism
based cards. On Lucent based cards, only report the station firmware
since that's all it supports. On symbol cards, report the symbol
specific firmware name as its station firmware.
3) Better Prism 2.5 and 3 family names. We really need to go table
driven for this.
4) Workaround for bugs in Intersil's firmware is only needed for at most
0.8.2 and earlier, since 0.8.3 and later appear to work.
Obtained from: NetBSD
securelevel_*() to be NULL for a while now.
- Use KASSERT() instead of if (foo) panic(); to optimize the
!INVARIANTS case.
Submitted by: Martin Faxer <gmh003532@brfmasthugget.se>
Unfortunately, this level doesn't really provide enough granularity. We
probably need several MI NOTES type files for things that are shared by
several architectures but not by all. For example, the PCI options could
live in a NOTES.pci.
This also updates the Makefile for i386 to generate LINT. The only changes
in the generated LINT are the order of various options.
Suggestions for improvement welcome.
in dump byte order (=network byte order). Swap blocksize and dumptime
to avoid extraneous padding on 64-bit architectures. Use CTASSERT
instead of runtime checks to make sure the header is 512 bytes large.
Various style(9) fixes.
Reviewed by: phk, bde, mike
memory in phys_avail will fit in 'int', use vm_size_t. This fixes booting
on sparc64 machines with more than 2 gigs of ram.
Thanks to Jan Chrillesen for providing me with access to a 4 gig machine.
emitted the total number of pages it still had to dump prior to
dumping a block of up to 16 pages. For a 128MB region this would
result in 8M number of printf()s. Barf!
The problem in general is that memory typically has one really
big region and a number of "scattered" smaller regions. Some may
even be just a few pages. The twiddle works best for now, but
it doesn't really give a good progress indication for the large
regions. Those are the cases where you definitely want good PI
to avoid having the user turn into a twiddle :-)
without removing the buffer from the vnode's dirty buffer list, which
can result in a panic in NFS. Replaced the code with a call to bundirty()
which deals with it properly.
PR: kern/36108, kern/36174
Submitted by: various people
Special mention: to Danny Schales <dan@coes.LaTech.edu> for providing a core dump that helped me track this down.
MFC after: 1 day
stuff was right, but the busdma stuff was massively not right.
Didn't really test on ia64 or i386- don't have the former h/w and my
FreeBSD-current disk is unwell right now. Hope that this is okay.
MFC after: 1 week
even when the number of records approaches the size of the hash table.
Besides, the previous implementation (using linear probing) was broken :)
Also, use the newly introduced MTX_SYSINIT.
various machdep.c's to being declared in kern_mutex.c.
- Add a new function mutex_init() used to perform early initialization
needed for mutexes such as setting up thread0's contested lock list
and initializing MI mutexes. Change the various MD startup routines
to call this function instead of duplicating all the code themselves.
Tested on: alpha, i386
"raw partition" of any kind since the floppy driver doesn't support
UFS-style partitions at all.
Reported by: "Crist J. Clark" <crist.clark@attbi.com>
Reviewed by: bde
MFC after: 3 days
hold the kernel text, data and loader metadata by not using a fixed slot
to store the TSB page(s) into. Enter fake 8k page entries into the kernel
TSB that cover the 4M kernel page(s), sot that pmap_kenter() will work
without having to treat these pages as a special case.
Problem reported by: mjacob, obrien
Problem spotted and 4M page handling proposed by: jake
special-case make rule
2.) Cleanups, remove superfluous expicit rules, add -nostdlib to LDFLAGS,
remove -X and -g, remove -g from CFLAGS
3.) Add BINDIR
4.) Build install the loader help file, add an empty help.sparc64
5.) Change the default configuration to only support booting from disk
6.) Get libofw.a from a path relative ${.OBJDIR}, not ${.CURDIR}
Submitted by: jake (1 - 5), obrien (6)
locks to be able to setup a SYSINIT call. This helps in places where
a lock is needed to protect some data, but the data is not truly
associated with a subsystem that can properly initialize it's lock.
The macros use the mtx_sysinit() and sx_sysinit() functions,
respectively, as the handler argument to SYSINIT().
Reviewed by: alfred, jhb, smp@
release times. Measurements are made and stored in nanoseconds but
presented in microseconds, which should be sufficient for the locks for
which we actually want this (those that are held long and / or often).
Also, rename some variables and structure members to unit-agnostic names.
date: 2001/08/15 00:04:59; author: augustss;
Add a little infrastructure so that individual drivers can easily check
if thee was a vendor+product locator match.
