Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
No functional change intended.
Mainly focus on files that use BSD 3-Clause license.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
Renumber cluase 4 to 3, per what everybody else did when BSD granted
them permission to remove clause 3. My insistance on keeping the same
numbering for legal reasons is too pedantic, so give up on that point.
Submitted by: Jan Schaumann <jschauma@stevens.edu>
Pull Request: https://github.com/freebsd/freebsd/pull/96
(it takes a long time on systems with many interfaces)
without reason and without checking its return value.
Reviewed by: cem
Obtained from: Maryse Levavasseur <maryse.levavasseur@stormshield.eu>
MFC after: 1 month
Sponsored by: Stormshield
Differential Revision: https://reviews.freebsd.org/D6979
cm_send() closes 'fd' on error. In that case, bail out early without trying to
recv from or close 'fd' again.
Reported by: Coverity
CID: 1006078
Sponsored by: EMC / Isilon Storage Division
This whole block of code as committed fully formed in r224144. I'm not really
sure what the intent was, but it seems plausible that !persist ifis could need
other member cleanup. Don't free the object until after we've finished
cleaning its members.
Reported by: Coverity
CID: 1006079
Sponsored by: EMC / Isilon Storage Division
Check against the size of the struct, not the pointer. Previously, a message
with a cm_len between 9 and 23 (inclusive) could cause int msglen to underflow
and read(2) to be invoked with msglen size (implicitly cast to signed),
overrunning the caller-provided buffer.
All users of cm_recv() supply a stack buffer.
On the other hand, the rtadvd control socket appears to only be writable by the
owner, who is probably root.
While here, correct some types to be size_t or ssize_t.
Reported by: Coverity
CID: 1008477
Security: unix socket remotes may overflow stack in rtadvd
Sponsored by: EMC / Isilon Storage Division
working.
- Fix a pointer calculation for padding when multiple dnssl[0-9]
parameters are specified [*].
Reported by: http://bugs.dragonflybsd.org/issues/2847 [*]
Off by default, build behaves normally.
WITH_META_MODE we get auto objdir creation, the ability to
start build from anywhere in the tree.
Still need to add real targets under targets/ to build packages.
Differential Revision: D2796
Reviewed by: brooks imp
usr.sbin/rtadvd:
usr.sbin/rtadvd/rtadvd.c:1291:7: error: taking the absolute value of unsigned type 'unsigned int' has no effect [-Werror,-Wabsolute-value]
abs(preferred_time - pfx->pfx_pltimeexpire) > rai->rai_clockskew) {
^
usr.sbin/rtadvd/rtadvd.c:1291:7: note: remove the call to 'abs' since unsigned values cannot be negative
abs(preferred_time - pfx->pfx_pltimeexpire) > rai->rai_clockskew) {
^~~
usr.sbin/rtadvd/rtadvd.c:1324:7: error: taking the absolute value of unsigned type 'unsigned int' has no effect [-Werror,-Wabsolute-value]
abs(valid_time - pfx->pfx_vltimeexpire) > rai->rai_clockskew) {
^
usr.sbin/rtadvd/rtadvd.c:1324:7: note: remove the call to 'abs' since unsigned values cannot be negative
abs(valid_time - pfx->pfx_vltimeexpire) > rai->rai_clockskew) {
^~~
2 errors generated.
These warnings occur because both preferred_time and pfx_pltimeexpire
are uint32_t's, so the subtraction expression is also unsigned, and
calling abs() is a no-op.
However, the intention was to look at the absolute difference between
the two unsigned quantities. Introduce a small static function to
clarify what we're doing, and call that instead.
Reviewed by: hrs
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D1197
the prefix to the interface's prefix list. This shouldn't make a
difference, since rtadvd(8) is single-threaded, but I've seen it crash
in delete_prefix() with pfx_rainfo == NULL, and this is the only place
where a prefix can be added to the list with a NULL pfx_rainfo.
MFC after: 3 days
PF_INET6 in kernel. This fixes various malfunction when the wall time
clock is changed. Bump __FreeBSD_version to 1000041.
- Use clock_gettime(CLOCK_MONOTONIC_FAST) in userland utilities.
MFC after: 1 month
clean-up RA messages for shutting down. The RA timers could prevent the rtadvd
daemon from shutting down because ra_output() just ignored !IFF_UP interfaces
and TRANSITIVE->UNCONFIGURED state transition never happened due to it.
Spotted by: kib
Approved by: re (bz)
- Fix an abnormal termination caused by twice of "rtadvctl disable". (r224303)
- Use poll() to wait for the control message socket instead of a spin loop.
(r224304)
- s/cmsg_/cm_/ to avoid conflict with CMSG_* symbols for struct cmsghdr.
(r224619)
- Ignore an interface that never sent RAs for graceful shut-down. (r224620)
- Refine log messages. (r225148)
- Fix SIGSEGV when receiving RAs that contain RDNSS and/or DNSSL options.
(r225149)
Approved by: re (kib)
added/removed interfaces in a more consistent manner and reloading the
configuration file.
- Implement burst unsolicited RA sending into the internal RA timer framework
when AdvSendAdvertisements and/or configuration entries are changed as
described in RFC 4861 6.2.4. This fixes issues that make termination of the
rtadvd(8) daemon take very long time.
An interface now has three internal states, UNCONFIGURED, TRANSITIVE, or
CONFIGURED, and the burst unsolicited sending happens in TRANSITIVE.
See rtadvd.h for the details.
- rtadvd(8) now accepts non-existent interfaces as well in the command line.
- Add control socket support and rtadvctl(8) utility to show the RA information
in rtadvd(8). Dumping by SIGUSR1 has been removed in favor of it.
added/removed interfaces in a more consistent manner and reloading
the configuration file.
- Add initial support for control socket. RA information in the
daemon can be obtained by rtadvctl(8) instead of SIGUSR1 in a similar
manner to ifconfig(8). The information dump has been removed in favor of it.
(reload the configuration file)
# rtadvctl reload
(show RA messages being sent on each interfaces)
# rtadvctl show
em0: flags=<UP,CONFIGURED,PERSIST> status=<RA_SEND> mtu 1280
DefaultLifetime: 30m
MinAdvInterval/MaxAdvInterval: 3m20s/3m20s
AdvLinkMTU: <none>, Flags: O, Preference: medium
ReachableTime: 0s, RetransTimer: 0s, CurHopLimit: 64
AdvIfPrefixes: yes
(show RA messages being sent only on em0)
# rtadvctl show em0
(rtadvctl -v show provides additional information)
# rtadvctl -v show em0
em0: flags=<UP,CONFIGURED,PERSIST> status=<RA_SEND> mtu 1280
DefaultLifetime: 30m
MinAdvInterval/MaxAdvInterval: 3m20s/3m20s
AdvLinkMTU: <none>, Flags: O, Preference: medium
ReachableTime: 0s, RetransTimer: 0s, CurHopLimit: 64
AdvIfPrefixes: yes
Prefixes (1):
2001:db8:1::/64 (CONFIG, vltime=30d, pltime=7d, flags=LA)
RDNSS entries:
2001:db8:1::128 (ltime=2m40s)
(stop rtadvd)
# rtadvctl shutdown
A remaining issue when reloading the configuration file is that
during that period rtadvd cannot communicate with rtadvctl due to some
additional RA sending for graceful shutdown. This will be fixed later.
