Do not assume that all uart drivers use uart_softc structure as is.
Some do a sensible thing and do declare their uart class and driver
properly and arrive into uart_bus_attach with suitably sized softc.
Submitted by: kan
Sponsored by: DARPA, AFRL
The gpiobus driver is attached explicitly and generally should be
at the same pass as its parent. Making it use BUS_PAS_BUS ensures
that it attaches immediately after parent adds it (assuming the
parent itself attached at BUS_PAS_BUS and above).
Submitted by: kan
Sponsored by: DARPA, AFRL
An example problem case is 163.1.0.0 (University of Oxford)
which is in an APNIC ERX address range. Previously we assumed
that ARIN has the correct information for all ERX allocations,
but in this case ARIN refers back to APNIC, rather than referring
to RIPE. This caused whois to loop.
Whois will no longer loop back and forth forever between two RIRs
that don't have an answer, but instead try the other RIRs in turn.
contiguous memory but in one path we did not always guarantee this,
thus do a m_pullup() there.
PR: 214385
Submitted by: Joe Jones (joeknockando googlemail.com)
MFC after: 3 days
either in the CLOSING or LAST-ACK state.
Reviewed by: hiren
MFC after: 3 weeks
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D8371
This is Infineon ADM6996FC/M/MX driver code on etherswitch framework.
Support PORT and DOT1Q VLAN.
This code suppose ADM6996FC SDC/SDIO connect to SOC network interface
MDC/MDIO.
This code tested on Netgear WGR614Cv7.
Submitted by: Hiroki Mori <yamori813@yahoo.co.jp>
Reviewed by: adrian, mizhka
Approved by: adrian(mentor)
Differential Revision: https://reviews.freebsd.org/D8495
Allow -B to mean -K -W.
There are times when fixing non-base elementes of the build that you
don't want to wait to get a completely clean world install. This
allows that at the cost of a little danger.
Submitted by: gallatin@
Sponsored by: Netflix, Inc
Hardfloat is now default (use riscv64sf as TARGET_ARCH
for softfloat).
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D8529
The feature enables us to pass through physical PCIe devices to FreeBSD VM
running on Hyper-V (Windows Server 2016) to get near-native performance with
low CPU utilization.
The patch implements a PCI bridge driver to support the feature:
1) The pcib driver talks to the host to discover device(s) and presents
the device(s) to FreeBSD's pci driver via PCI configuration space (note:
to access the configuration space, we don't use the standard I/O port
0xCF8/CFC method; instead, we use an MMIO-based method supplied by Hyper-V,
which is very similar to the 0xCF8/CFC method).
2) The pcib driver allocates resources for the device(s) and initialize
the related BARs, when the device driver's attach method is invoked;
3) The pcib driver talks to the host to create MSI/MSI-X interrupt
remapping between the guest and the host;
4) The pcib driver supports device hot add/remove.
Reviewed by: sephe
Approved by: sephe (mentor)
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D8332
The new methods will be used by the coming pcib driver.
Reviewed by: sephe
Approved by: sephe (mentor)
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D8409
vcpu_id is host's representation of guest CPU.
We get the mapping between vcpu_id and FreeBSD kernel's cpu id when VMBus
driver is loaded. Later, when a driver, like the coming pcib driver, talks
to the host and needs to refer to a guest CPU, the driver must use the
vcpu_id.
Reviewed by: jhb, sephe
Approved by: sephe (mentor)
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D8410
Drop the tracking down to the pmap layer, with optimizations to only track
necessary pages. This should give a (slight) performance improvement, as well
as a stability improvement, as the tracking is already mostly handled by the
pmap layer.
Core kernel is always compiled with -msoft-float on all of our platforms,
make sure we follow the suit with trampoline as well.
Reviewed by: adrian, br, imp
Differential Revision: https://reviews.freebsd.org/D8507
This allows these files to be used with hard and softfloat targets
with no special flags passed to the compiler.
Reviewed by: adrian, br, imp
Differential Revision: https://reviews.freebsd.org/D8506
The tree can be build with an external toolchain that will not
necessarily default to desired settings, so we have to specify
the required flags explicitly to force the required compilation
mode.
Reviewed by: adrian, br
Sponsored by: https://reviews.freebsd.org/D8505
Summary:
This implements part of the gpio-poweroff and gpio-restart device tree
bindings. Optional properties are not handled currently. It also currently
only supports level-triggered reset.
Reviewed By: gonzo
Differential Revision: https://reviews.freebsd.org/D8521
Rather than printing a warning for every time we receive a fileid > 2^32
from the NFS server, count warnings and print at most one of each warning
type per minute, e.g.,
Nov 15 05:17:34 ip-172-30-1-221 kernel: NFSv4 fileid > 32bits (24730 occurrences)
Nov 15 05:17:56 ip-172-30-1-221 kernel: NFSv4 mounted on fileid > 32bits (178 occurrences)
Nov 15 05:18:53 ip-172-30-1-221 kernel: NFSv4 fileid > 32bits (7582 occurrences)
Nov 15 05:18:58 ip-172-30-1-221 kernel: NFSv4 mounted on fileid > 32bits (23 occurrences)
A buildworld with an NFS mounted /usr/obj can otherwise result in
hundreds of thousands of lines being printed, which seems unnecessarily
verbose.
When ino_t becomes a 64-bit type, these printfs will no longer be needed
(and the problems associated with truncating 64-bit fileids to generate
32-bit inode numbers will also go away).
Reviewed by: rmacklem
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D8523
If MII1 interface is disabled, then enable phy4/mac4.
Submitted by: Hiroki Mori <yamori813@yahoo.co.jp>
Reviewed by: mizhka, adrian
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D6832
Use "ti,am33xx" instead of "ti,am335x", which gives an exact match in every
DTS we support.
This fixes the boot on TI SoCs after r308533.
Suggested by: gonzo
Sponsored by: Rubicon Communications, LLC (Netgate)
Bit identifier of printf %b is octal integer, but not decimal. ULRI bit is
13-th bit (starting with 0) according to MIPS Architecture Volume III v.6.
In this case the bit identifier (starts with 1) should be \16.
Reviewed by: gonzo
Approved by: adrian(mentor)
Differential Revision: https://reviews.freebsd.org/D8516
This commit is part of D6920 review. One of macro had wrong prefix:
BMCA => BCMA
Reviewed by: landonf, adrian (mentor)
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D6920
the aintc driver for Allwinner A10.
This fixes the boot of the GENERIC ARM kernel on TI/AM335x SoCs.
Sponsored by: Rubicon Communications, LLC (Netgate)
not remove user-space visible fields from vm_cnt or all of the references to
cached pages from comments. Those changes will come later.)
Reviewed by: kib, markj
Tested by: pho
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D8497
