before returning. Device nodes are created via the "taste" mechanism,
so this is necessary in order to make sure that devfs entries are
created before mdconfig(8) returns.
This may be a MFC candidate for 5.3.
Suggested by: phk
allocation. Notably, in this case, the driver tries to allocate several
pieces of memory and then fails if the pieces allocated after the first
do not come after it physically, and within a specific range (8MB I
believe). Of course, this could just as easily fail for any number of
reasons, but it almost always fails now that contiguous allocations start
at the end of possible specified memory locations rather than the beginning.
Allocate all the possibly-needed memory up front, even though it's a waste,
to get around this. The least bogus solution would be to take the physical
address from the first allocation and create a new tag that specified that
further allocations must follow it within that 8MB window, then use that
when allocating new channels, but that's left for anyone else that really
feels like doing it.
Tested by: Erwin Lansing <erwin@lansing.dk>
Previously the early drop was disabled unconditionally for ALTQ-enabled
kernels.
This should give some benefit for the normal gateway + LAN-server case with
a busy LAN leg and an ALTQ managed uplink.
Reviewed and style help from: cperciva, pjd
verification of regular data when device is in complete state.
On verification error, EIO error is returned for the bio and sysctl
kern.geom.raid3.stat.parity_mismatch is increased.
Suggested by: phk
The whole problem seems to be size. Which is odd, because it is said
that size doesn't matter. Anyway... Add -Os to strategic places in the
makefile to have the final loader be as mall as possible. This seems
to be enough to make it work. For now... I think something is more
fundamentally wrong; or something more fundamental is wrong. Potato,
potaato.
be manipulated by prison root. In 4.x prison root can not manipulate
system flags, regardless of the security level. This behavior
should remain consistent to avoid any surprises which could lead
to security problems for system administrators which give out
privileged access to jails.
This commit changes suser_cred's flag argument from SUSER_ALLOWJAIL
to 0. This will prevent prison root from being able to manipulate
system flags on files.
This may be a MFC candidate for RELENG_5.
Discussed with: cperciva
Reviewed by: rwatson
Approved by: bmilekic (mentor)
PR: kern/70298
as m_len, or the pkthdr length will be inconsistent with the actual
length of data in the mbuf chain. The symptom of this occuring was
"out of data" warnings from in_cksum_skip() on large UDP packets sent
via the loopback interface.
Foot shot: green
The binutils 2.15 assembler now automaticly and non-optionally adds
the .eh_frame section for unwind information. This section appears
to wreck havoc to the final boot code. Fix this by using a special
linker script that discards the .eh_frame sections, but is otherwise
identical to the linker internal script used for -N.
Compiler used: gcc 3.3.5
Verified with: binutils 2.14 & binutils 2.15 (stock and in-tree)
Tested with: /boot/loader & /boot/netboot
the tunable or sysctl 'net.route.netisr_maxqlen'. Default the maximum
depth to 256 rather than IFQ_MAXLEN due to the downsides of dropping
routing messages.
MT5 candidate.
Discussed with: mdodd, mlaier, Vincent Jardin <jardin at 6wind.com>
rule only in place of all rules match. This is similar to how ipfw(8) works.
Provide a sysctl, mac_bsdextended_firstmatch_enabled, to enable this
feature.
Reviewed by: re (jhb)
Aprroved by: re (jhb)
manipulating a vnode, e.g., calling vput(). This reduces contention for
Giant during many copy-on-write faults, resulting in some additional
speedup on SMPs.
Note: debug_mpsafevm must be enabled for this optimization to take effect.
as well, even if device is in complete state.
I observe 40% of speed-up with this option for random read operations,
but slowdown for sequential reads.
Basically, without this option reading from a RAID3 device built from 5
components (c0-c4) looks like this:
Request no. Used components
1 c0+c1+c2+c3
2 c0+c1+c2+c3
3 c0+c1+c2+c3
With the new feature:
Request no. Used components
1 c0+c1+c2+c3
2 (c1^c2^c3^c4)+c1+c2+c3
3 c0+(c0^c2^c3^c4)+c2+c3
4 c0+c1+(c0^c1^c3^c4)+c3
5 c0+c1+c2+(c0^c1^c2^c4)
6 c0+c1+c2+c3
[...]
security.jail.allow_raw_sockets sysctl MIB is set to 1) where privileged
access to jails is given out, it is possible for prison root to manipulate
various network parameters which effect the host environment. This commit
plugs a number of security holes associated with the use of raw sockets
and prisons.
This commit makes the following changes:
- Add a comment to rtioctl warning developers that if they add
any ioctl commands, they should use super-user checks where necessary,
as it is possible for PRISON root to make it this far in execution.
- Add super-user checks for the execution of the SIOCGETVIFCNT
and SIOCGETSGCNT IP multicast ioctl commands.
- Add a super-user check to rip_ctloutput(). If the calling cred
is PRISON root, make sure the socket option name is IP_HDRINCL,
otherwise deny the request.
Although this patch corrects a number of security problems associated
with raw sockets and prisons, the warning in jail(8) should still
apply, and by default we should keep the default value of
security.jail.allow_raw_sockets MIB to 0 (or disabled) until
we are certain that we have tracked down all the problems.
Looking forward, we will probably want to eliminate the
references to curthread.
This may be a MFC candidate for RELENG_5.
Reviewed by: rwatson
Approved by: bmilekic (mentor)
result of the notify() function to decide if we need to unlock the
in6pcb or not, rather than always unlocking. Otherwise, we may unlock
and already unlocked in6pcb.
Reported by: kuriyama, Gordon Bergling <gbergling at 0xfce3.net>
Tested by: kuriyama, Gordon Bergling <gbergling at 0xfce3.net>
Discussed with: mdodd
UDP/IP header, make sure that space is also allocated for the link
layer header. If an mbuf must be allocated to hold the UDP/IP header
(very likely), then this will avoid an additional mbuf allocation at
the link layer. This trick is also used by TCP and other protocols to
avoid extra calls to the mbuf allocator in the ethernet (and related)
output routines.
to check aperture size, avoiding hangs. Maintain the rest of the bits when
setting/unsetting ATTBASE. This essentially matches Linux's AGP driver as well.
PR: kern/70037
Submitted by: Mark Tinguely <tinguely at casselton dot net>
Obtained from: NetBSD
in the shutdown_final state if the RB_NOSYNC flag is set.
The specific motivation in this case is that a system panic in an
interrupt context results in a call to module_shutdown(), which
calls g_modevent(), which calls g_malloc(..., M_WAITOK), which
results in a second panic. While g_modevent() could be fixed to
not call malloc() for MOD_SHUTDOWN events (which it doesn't handle
in any case), it is probably also a good idea to entirely skip the
execution of the module shutdown handlers after a panic.
This may be a MFC candidate for RELENG_5.
shutdown_pre_sync state if the RB_NOSYNC flag is set. This is the
likely cause of hangs after a system panic that are keeping crash
dumps from being done.
This is a MFC candidate for RELENG_5.
MFC after: 3 days
systems that have overlapping regions specified in their sysresource
objects. This patch fixes ATA DMA and acpi_timer allocation for such
sysctems. It should eventually be moved to resource_list_add() if it is
a valid generalized approach. The minimal approach for 5.3 is:
"Loop through all current resources to see if the new one overlaps
any existing ones. If so, the old one always takes precedence and
the new one is adjusted (or rejected). We check for three cases:
1. Tail of new resource overlaps head of old resource: truncate the
new resource so it is contiguous with the start of the old.
2. New resource wholly contained within the old resource: error.
3. Head of new resource overlaps tail of old resource: truncate the
new resource so it is contiguous, following the old."
Tested by: Radek Kozlowski <radek_at_raadradd.com>
Discussed with: imp
MFC after: 4 days
of 0x3f2-0x3f5,0x3f7 the ports are not 7 bytes apart. This should fix
floppy probing on such systems. (We handle the case of adjusting for
a start of 0x3f2 -> 0x3f0 separately, although that code should still be
checked if there are still floppy problems for others.)
Tested by: Sarunas Vancevicius <vsarunas_at_eircom.net>
MFC after: 3 days
sockets are connection-oriented for the purposes of kqueue
registration. Since UDP sockets aren't connection-oriented, this
appeared to break a great many things, such as RPC-based
applications and services (i.e., NFS). Since jmg isn't around I'm
backing this out before too many more feet are shot, but intend to
investigate the right solution with him once he's available.
Apologies to: jmg
Discussed with: imp, scottl
