- pkg(8) cannot be removed before subsequent reinvocations
- The PKG_CACHEDIR cannot be cleaned after the repo*.sqlite
has been removed
- pkg(8) cannot be removed as a precursor to any of the other
steps involved here
MFC after: 3 days
X-MFC-With: r285722
X-MFC-Before: 10.2-{BETA3,RC1} (whichever happens next)
Sponsored by: The FreeBSD Foundation
The true cause of the missing UFS/MSDOSFS labels has been
identified, and only affects stable/10 at the moment.
An request for commit to stable/10 will be pending RE approval
after this commit.
MFC after: 1 day
X-MFC-Note: never
X-MFC-Never: r285018, r285019, r285076, r285078, r285082
Sponsored by: The FreeBSD Foundation
the symlink from loader.rc.sample.
Fix paths relative to the CHROOTDIR.
MFC after: 3 days
X-MFC-With: r285076, r285078
X-MFC-Before: 10.2-BETA1
Sponsored by: The FreeBSD Foundation
UFS/MSDOSFS label issues on FreeBSD/arm builds, however
the real problem was addressed in r285076, which is due
to two separate issues, unrelated to md(4) stale device
existence.
MFC after: 3 days
X-MFC-With: r285076
X-MFC-Before: 10.2-BETA1
Sponsored by: The FreeBSD Foundation
FreeBSD/arm builds. The problem stems from the loader.rc file
not existing, as well as geom_label not being loaded at boot.
For now, add the geom_label_load entry to loader.conf, and
symlink loader.rc.sample to loader.rc, both of which allowed
my BeagleBone Black to boot fine with a UFS label reference in
fstab(5).
MFC after: 3 days
X-MFC-Before: 10.2-BETA1
Sponsored by: The FreeBSD Foundation
cannot possibly exist within the chroot(8) before the target
filesystem actually exists.
MFC after: 3 days
X-MFC-With: r285018
Sponsored by: The FreeBSD Foundation
written to disk with newfs(8) and newfs_msdosfs(8).
When iterating through snapshot builds in serial, it is possible for
a build failure to leave stale md(4) devices behind, in some cases, they
could have a UFS or MSDOS filesystem label assigned.
If the md(4) is not destroyed (or not able to be destroyed, as has
happened recently due to my own fault), the filesystem label that
already exists can interfere with a new md(4) device that is targeted to
have the same label.
This behavior, although admittedly a logic error in the wrapper build
scripts, has caused intermittent reports (in particular with the armv6
builds) of missing UFS/MSDOSFS labels, causing the image to fallback to
the mountroot prompt. This appears to only happen when the backing
md(4) device is destroyed before the calling umount(8) on the target
mount, after which the UFS/MSDOSFS label persists.
The workaround is this: If EVERYTHINGISFINE is set to non-empty value,
check for an existing ufs/rootfs and msdosfs/MSDOSBOOT filesystem label
in arm_create_disk(), and rm(1) them if they exist.
The EVERYTHINGISFINE variable is chosen because it is used in exactly
one other place - release/Makefile.mirrors - and there are big scary
warnings at the top of that file as well that it should *not* be used
under normal circumstances. This should not destroy a build machine
that also uses '/dev/ufs/rootfs' as the UFS label, and I have verified
in extensive local testing that the destroyed label is recreated when
the md(4) is unmounted/mounted, but this really should not be enabled
by anyone.
Having said all that, I absolutely *do* plan MFC this to stable/10 for
the 10.2-RELEASE cycle, as so far, I have only observed this behavior
on stable/10, but this is a temporary solution until I can unravel all
of the failure paths to properly trap them.
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
It was useful when working out several kinks when
testing automated image uploading when retrying was
necessary, but now it is making things much too messy.
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
not set, which expands to '11.0-CURRENT', for example.
If the branch is -CURRENT, -STABLE, or -PRERELEASE, suffix
the VAGRANT_VERSION with the snapshot date.
MFC after: 3 days
X-MFC-Needs: r284893, r284895, r284896, r284897, r284942
Tested with: head@r284961 (patched)
Sponsored by: The FreeBSD Foundation
VAGRANT_PROVIDERS variable. Right now, it defaults to only
vmware_desktop, virtualbox support is to follow at some point.
While here, fix the hashicorp URL: s/vagrant/atlas/, which
was result of a sed(1) replace (and my fault).
Sponsored by: The FreeBSD Foundation
VAGRANT_${VAR} variables extracted from VAGRANT_UPLOAD_CONF.
Set ATLAS_${VAR} to VAGRANT_${VAR} if VAGRANT_UPLOAD_CONF
is set. There is intent to intentionally have separate
variants of configuration entries, but the defaults do not
yet have any reason to be different.
Sponsored by: The FreeBSD Foundation
machine images to the Google Compute Engine platform.
By default, gcutil/gsutil requires an Oauth2 login generated
from a URL that must be opened in a browser, a verification
code copied back to the terminal from which it was invoked,
etc., etc., making it near impossible for automation.
I've hacked together an evil solution to work around this,
so unless GCE_LOGIN_SKIP is set to a non-empty value, this
Makefile will not do anything useful.
As a result of this commit, remove the gce-package.sh script
that was never, nor will ever be, used.
MFC after: 3 days
X-MFC-Note: (hopefully)
Sponsored by: The FreeBSD Foundation
AMIs and Azure VM images. This is particularly helpful for
testing to avoid name collisions, but also useful for cases
where a necessary rebuild is done before the date changes.
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Remove the Azure-local vm_extra_create_disk(), since we no longer
need qemu-img to convert the final VHD image to an Azure-compatible
format.
Although the waagent utility is installed from ports, create the
symlink to /usr/sbin, pending investigation on where this is
hard-coded, so it can be reported upstream. In the meantime, this
is good enough.
MFC after: 3 days
X-MFC-Needs: r284269, r284270, r284271, r284655,
r284656, r284657, r284658, r284659
X-MFC-Note: Required for 10.2-RELEASE, marcel@ has
implicit approval for the required changes
Sponsored by: The FreeBSD Foundation
While 480M is sufficient for 10-STABLE, 11-CURRENT images at
this size fail due to insufficient space.
This commit is solely for the sake of getting updated snapshot
builds out, after which I'll analyze the resulting images to
figure out what a more sane value is, even if the image size
for 11-CURRENT needs to differ from 10-STABLE.
Sponsored by: The FreeBSD Foundation
Since the images are effectively mostly zeros at 1G,
reduce the size to allow installation on smaller SD
cards, such as 512Mb.
While here, stop writing the /boot.txt file on the
WANDBOARD, which isn't used anyway.
Discussed with: imp
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
According to the manual page, '-m' should create the user home
directory, however rigorous testing suggests it does not, and
it is unclear if this is an implementation or expectation issue.
Sponsored by: The FreeBSD Foundation
Disabling soft updates journaling appears to resolve issues
with kernel panics, and may also be generally bad to have
enabled for SD cards.
Requested by: ian
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
pw(8) to set the correct /etc directory for the user/group
files.
Provided by: ian (thanks!)
MFC after: 3 days
X-MFC-with: r283894
Sponsored by: The FreeBSD Foundation
user in the userland for the target image, but creates the
user in the build chroot.
Before this is re-enabled, I want to figure out a clean way
to do this without requiring the overhead of third-party
utilities (such as qemu).
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Reduce a number of duplicated logic.
As of this commit, this file does exactly what it is needed to do.
MFC after: 3 days
X-MFC-Note: needs all previous changes
Sponsored by: The FreeBSD Foundation
which helps control some of the arm-specific bits a bit more
cleanly (but not really 'clean').
If BOARDNAME is defined (as is in the WANDBOARD configuration
RE uses), do some magic to work with the KERNCONF and BOARDNAME
to rename the file, making it a bit more intuitive for the
consumer to determine which they need.
Yes, it is ugly, that is why there is a big warning at the top.
It is, however, still much cleaner than the now 474-line shell
script, and this Makefile produces the hierarchy needed without
much evil.
MFC after: 1 week
X-MFC-Note: needs all previous Makefile.mirror commits
Sponsored by: The FreeBSD Foundation
to sh(1).
Include xz(1)-compressed images when renaming snapshot
builds.
Use OSRELEASE in place of REVISION-BRANCH for checksum
filenames.
Sponsored by: The FreeBSD Foundation
Without this, AWS rejects subsequent image uploads of a different
architecture because the name conflicts.
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
For RE purposes, we use the default (/R within the chroot), so
this helps avoid copying files multiple times and xz(1)-compressing
additional times when not needed.
Again, this Makefile is not for general consumption.
Sponsored by: The FreeBSD Foundation
a 474-line kludge of a shell script to pre-create the directory
hierarchy on ftp-master.
This is not in any way connected to the build, and there is no
intention to do so. This only intent here is to try to make
things a little bit easier for me. But I've probably just made
things worse.
Sponsored by: The FreeBSD Foundation
Of note:
- This commit adds native FreeBSD/arm release build support without
requiring out-of-tree utilities.
- Part of this merge removes the WANDBOARD-{SOLO,DUAL,QUAD} kernel
configuration files, for which the IMX6 kernel configuration file
should be used instead.
- The resulting images have a 'freebsd' user (password 'freebsd'),
to allow ssh(1) access when console access is not available (VGA
or serial). The default 'root' user password is set to 'root'.
- The /etc/ttys file for arm images now enable both ttyv0 and ttyu0
by default.
Help from: many (boot testing, feedback, etc.)
Sponsored by: The FreeBSD Foundation
since it supports all of these board variants.
While here, remove the WANDBOARD-{QUAD,SOLO,DUAL} kernel
configuration files.
Discussed with: ian
Sponsored by: The FreeBSD Foundation
error:
root@releng2:/ # mount_msdosfs /dev/md5s1 /usr/obj/usr/src/release/WANDBOARD-QUAD/fat
mount_msdosfs: /dev/md5s1: File name too long
Sponsored by: The FreeBSD Foundation
Ian informed me a few months ago that the WANDBOARD-* kernels will
eventually be combined into one that will work across all these
boards, but for now, build them individually.
Sponsored by: The FreeBSD Foundation
standard 'install' location for other architectures), then
compress the image with xz(1), and generate the CHECKSUM
files.
Sponsored by: The FreeBSD Foundation
