o improves understandability by replacing numerous relative address
calculations with fixed addresses; everything should now match up
more easily with the vm layout shown at the top of the file
o move the expansion bus chip select regions to be contiguous with
the expansion bus configuration area; this is not exploited right
now but allows map consolidation in the future
o leave a gap between the expansion bus regions and the pci config
space in case we want to map more exp bus cs regions
Reviewed by: imp, thompsa
poll_no_poll().
Return a poll_no_poll() result from devfs_poll_f() when
filedescriptor does not reference the live cdev, instead of ENXIO.
Noted and tested by: hps
MFC after: 1 week
1) WP should never be marked unless flight size is 0
2) When recovering from wp if the peer ack's it we don't mark for retran
3) When recovering, we must assure a timer is still running.
ABIs:
- Store the FPU initial control word in the pcb for each thread.
- When first using the FPU, load the initial control word after restoring
the clean state if it is not the standard control word.
- Provide a correct control word for Linux/i386 binaries under
FreeBSD/amd64.
- Adjust the control word returned for fpugetregs()/npxgetregs() when a
thread hasn't used the FPU yet to reflect the real initial control
word for the current ABI.
- The Linux/i386 ABI for FreeBSD/i386 now properly sets the right control
word instead of trashing whatever the current state of the FPU is.
Reviewed by: bde
- Enable keyboard autodetection by default for ISA syscons attachments.
- If there are no syscons hints at all, assume there is a single sc0 device
anyway. The console probe will still fail unless a VGA adapter is found.
MFC after: 2 weeks
- Remove the control word parameter to npxinit(). It was always set
to __INITIAL_NPXCW__.
- Remove npx_cleanstate_ready as the cleanstate is always initalized
when it is used.
- Improve the handling of the case when the FPU isn't present. Now
the npx0 device no longer succeeds in its probe so all of npx_attach()
is skipped. Also, we allow this case with SMP (though that shouldn't
actually occur as all i386 systems that support SMP have FPUs) now.
SMP was only an issue back when we had an FPU emulator which was not
per-CPU.
- MFamd64: Clear some of the state in npx_cleanstate rather than leaving
it as garbage.
- MFamd64: When a user thread first uses the FPU, use npx_cleanstate for
the initial FPU state.
Reviewed by: bde
- fpudna() always returned 1 since amd64 CPUs always have FPUs. Change
the function to return void and adjust the calling code in trap() to
assume the return 1 case is the only case.
- Remove fpu_cleanstate_ready as it is always true when it is tested.
Also, only initialize fpu_cleanstate when fpuinit() is called on the BSP.
Reviewed by: bde
entry is a specific entry to override the generic NetMos entry so that
puc(4) will leave this device alone and let uart(4) claim it.
Submitted by: Navdeep Parhar nparhar @ gmail
Reviewed by: marcel
MFC after: 1 week
bogus entries have a starting IRQ that is invalid (> 255, so won't fit
into a PCI intline config register). It had the side effect of breaking
MSI by "claiming" several IRQs in the MSI range. Fix this by ignoring such
I/O APICs.
MFC after: 2 weeks
when determining the size of a BAR by writing all 1's to the BAR and
reading back the result, always operate on the full 64-bit size.
Reviewed by: imp
MFC after: 1 month
flag when calling bus_alloc_resource() to allocate resources from a parent
PCI bridge. For PCI-PCI bridges this asks the bridge to satisfy the
request using the prefetchable memory range rather than the normal
memory range.
Reviewed by: imp
Reported by: scottl
MFC after: 1 week
Do not overload the local variable size in kern_shmat() due to vm_size_t
change.
Fix style bug by adding explicit comparision with 0.
Discussed with: bde
MFC after: 1 week
BAR could be allocated twice by different children of a vgapci0 device.
To fix this, change the vgapci0 device to track references on its associated
resources so that they are only allocated once from the parent PCI bus and
released when no children are using them. Previously this leaked a small
amount of KVA on at least some architectures.
into the advance_peer_ack point so we would incorrectly
send a wrong value in the FWD-TSN
- PR-SCTP bug, where an PR packet is used for a window
probe which could incorrectly get the packet moved
back into the send_queue, which will cause major issues and
should not happen.
- Fix a trace to use the proper macro.
We now explicitly enable INTx during bus_setup_intr() if it is needed.
Several of the ata drivers were managing this bit internally. This is
better handled in pci and it should work for all drivers now.
We also mask INTx during bus_teardown_intr() by setting this bit.
Reviewed by: jhb
MFC after: 3 days
We fail mapping for any udf_bmap_internal error and there can be
different reasons for it, so no need to (over-)emphasize files with
data in fentry.
Submitted by: bde
Approved by: jhb
are used by glibc. This silents the message "2.4+ kernel w/o ELF notes?"
from some programs at start, among them are top and pkill.
Do the assignment of the vector entries in elf_linux_fixup()
as it is done in glibc.
Fix some minor style issues.
Submitted by: Marcin Cieslak <saper at SYSTEM PL>
Approved by: kib (mentor)
MFC after: 1 week
and do not attempt to perform a group lookup.
This is a socket layer lock, and the bottom half of IP
really has no business taking it.
Use the value of the in_mcast_loop sysctl to determine
if we should loop back by default, in the absence of
any multicast socket options. Because the check on
group membership is now deferred to the input path,
an m_copym() is now required.
This should increase multicast send performance where the
source has not requested loopback, although this has not been
benchmarked or measured.
It is also a necessary change for IN_MULTI_LOCK to become
non-recursive, which is required in order to implement IGMPv3
in a thread-safe way.
IPv4 multicast sends are looped back to senders by default
on a stack-wide basis, rather than relying on the socket option.
Note that the sysctl only applies to newly created multicast sockets.
