options into kern.opts.mk and change all the places where we use
src.opts.mk to pull in the options. Conditionally define SYSDIR and
use SYSDIR/conf/kern.opts.mk instead of a CURDIR path. Replace all
instances of CURDIR/../../etc with STSDIR, but only in the affected
files.
As a special compatibility hack, include bsd.owm.mk at the top of
kern.opts.mk to allow the bare build of sys/modules to work on older
systems. If the defaults ever change between 9.x, 10.x and current for
these options, however, you'll wind up with the host OS' defaults
rather than the -current defaults. This hack will be removed when
we no longer need to support this build scenario.
Reviewed by: jhb
Differential Revision: https://phabric.freebsd.org/D529
1) " ext" length should be included into OPIE_CHALLENGE_MAX (as all places
of opie code expects that).
2) Overflow check in challenge.c is off by 1 even with corrected
OPIE_CHALLENGE_MAX
3) When fallback to randomchallenge() happens and rval is 0 (i.e.
challenge is too long), its value should be set to error state too.
To demonstrate the bug, run opiepasswd with valid seed:
opiepasswd -s 1234567890123456
and notice that it falls back to randomchallenge() (i.e. no
1234567890123456 in the prompt).
PR: 191511
Submitted by: mitsururike@gmail.com (partially)
MFC after: 1 week
Rename vt_generate_vga_palette() to vt_generate_cons_palette() and
change it to build a palette where the color index is the same than in
terminal escape codes, not the VGA index. That's what TCHAR_CREATE()
uses and passes to vt(4).
The main differences between both orders are:
o Blue and red are swapped (1 <-> 4)
o Yellow and cyan are swapped (3 <-> 6)
The problem remained unnoticed, because the RGB bit indexes passed to
vt_generate_vga_palette() were reversed. This inversion was cancelled
by the colors inversions in the generated palette. For instance, red
(0xff0000) and blue (0x0000ff) have bytes in opposite order, but were
swapped in the palette. But after changing the value of blue (see last
paragraph), the modified color was in fact the red one.
This commit includes a fix to creator_vt.c, submitted by Nathan
Whitehorn: fb_cmsize is set to 16. Before this, the generated palette
would be overwritte. This fixes colors on sparc64 with a Creator3D
adapter.
While here, tune the palette to better match console colors and improve
the readability (especially the dark blue).
Submitted by: nwhitehorn (fix to creator_vt.c)
MFC after: 1 week
pmap, unlike i386, and similar to i386/xen pv, does not tolerate
abandoned mappings for the freed pages.
Reported and tested by: dumbbell
Diagnosed and reviewed by: alc
Sponsored by: The FreeBSD Foundation
In several functions, vtbuf_putchar() in particular, the lock on vtbuf
is acquired twice:
1. once by the said functions;
2. once in vtbuf_dirty().
Now, vtbuf_dirty_locked() and vtbuf_dirty_cell_locked() allow to
acquire that lock only once.
This improves the input speed of vt(4). To measure the gain, a
50,000-lines file was displayed on the console using cat(1). The time
taken by cat(1) is reported below:
o On amd64, with vt_vga:
- before: 1.0"
- after: 0.5"
o On sparc64, with creator_vt:
- before: 13.6"
- after: 10.5"
MFC after: 1 week
vt_fb_attach() currently always returns 0, but it could return a code
defined in errno.h. However, it doesn't return a CN_* code. So checking
its return value against CN_DEAD (which is 0) is incorrect, and in this
case, a success becomes a failure.
The consequence was unimportant, because the caller (drm_fb_helper.c)
would only log an error message in this case. The console would still
work.
Approved by: nwhitehorn
The original commit was supposed to stop the ability to do raw frame
injection in monitor mode to arbitrary channels (whether supported
by regulatory or not) however it doesn't seem to have been followed
by any useful way of doing it.
Apparently AHDEMO is supposed to be that way, but it seems to require
too much fiddly things (disable scanning, set a garbage SSID, etc)
for it to actually be useful for spoofing things.
So for now let's just disable it and instead look to filter transmit
in the output path if the channel isn't allowed by regulatory.
That way monitor RX works fine but TX will be blocked.
I don't plan on MFC'ing this to -10 until the regulatory enforcement
bits are written.
* Include OBJDIR to make sure the generated file is found;
* Simplify the definition of OBJS;
* Add targets for shared objects and for profiled objects.
MFC after: 3 days
The AR9380 and later chips have a 128KiB register window, so the register
read diag api needs changing.
The tools are about to be updated as well. No, they're not backwards
compatible.
and tgammal in libm. These functions are part of ISO/IEC 9899:1999
and their prototypes should have been moved into the appropriate
__ISO_C_VISIBLE >= 1999 section. After moving the prototypes,
remnants of r236148 can be removed.
PR: standards/191754
Reviewed by: bde
erroneously skip symbols that were not mangled at all. Fix this by
moving the return into the preceding if block.
While here, simplify the code by letting __cxa_demangle() allocate the
needed space for the demangled symbol. This also fixes a memory leak,
which would occur whenever __cxa_demangle() failed.
Reported by: pgj
MFC after: 3 days
If powersave is enabled and there are any transitions to network
or full sleep - even if they're pretty damned brief - eventually
something messes up somewhere and the bus glue between the AR9331
SoC and the AR9331 wifi stops working. It shows up as stuck DMA
and LOCAL_TIMEOUT interrupts.
Both ath9k and the reference driver does a full chip reset if things
get stuck.
So:
* teach the AR9330 HAL about the force_full_reset option I added a
couple of years ago;
* if the chip is currently in full-sleep, do a full-reset;
* if TX DMA and/or RX DMA are still enabled (eg, they did get
stuck during reset) then do a full-reset.
Tested:
* AR9331 SoC, STA mode
pmap_enter(PMAP_ENTER_NOSLEEP). The PGA_WRITEABLE flag can be set
when either the page is busied, or the owner object is locked.
Update comments, move all assertions about page state when
PGA_WRITEABLE flag is set, into new helper
vm_page_assert_pga_writeable().
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
cheating by assigning the same sector offset to both directories,
but it seems that VirtualBox doesn't like that. Neither does
qemu from the looks of it. We now actually write the directory
and table twice.
MFC after: 3 days
Fix PR#20520 - predicate called too many times in list::remove_if.
Add tests for list, forward_list, and the std::remove_if algorithm
This fixes an issue where std::list<>::remove_if() and remove() could
erroneously visit elements twice.
Reported by: Dominic Fandrey <kamikaze@bsdforen.de>
PR: 192303
MFC after: 3 days
While here, change how we check if the current line is the last one.
Before, we just checked if there were more files after the current one.
Now, we check the actual content of those files: they files may not have
a line at all. This matches the definition of the "last line" by the
Open Group.
The new behavior is closer to GNU sed.
PR: 160745
Phabric: https://phabric.freebsd.org/D431
Reviewed by: jilles
Approved by: jilles
Exp-run by: antoine
mapping size (currently unused). The flags includes the fault access
bits, wired flag as PMAP_ENTER_WIRED, and a new flag
PMAP_ENTER_NOSLEEP to indicate that pmap should not sleep.
For powerpc aim both 32 and 64 bit, fix implementation to ensure that
the requested mapping is created when PMAP_ENTER_NOSLEEP is not
specified, in particular, wait for the available memory required to
proceed.
In collaboration with: alc
Tested by: nwhitehorn (ppc aim32 and booke)
Sponsored by: The FreeBSD Foundation and EMC / Isilon Storage Division
MFC after: 2 weeks
Correct the usage in both the manpage and in usage() to indicate
that the wait interval and repetition count may be given either
with the respective -w/-c arguments, or as the final positional
arguments. [0]
The corresponding code to implement the positional arguments has
been conditional on the (always-enabled) BACKWARD_COMPATIBILITY
macro since the original 4.4-lite import. It's no longer reasonable
to remove the functionality, so remove the macro and conditional
instead.
Note that multiple disks may be given on the command line.
While here, sort arguments and apply minor mdoc fixes.
PR: 184755 [0]
Approved by: hrs (mentor, src committer)
