Commit Graph

51 Commits

Author SHA1 Message Date
yongari
9dbdda24ab Enable receive filter in sis_rxfilter().
While I'm here add a check for driver running state for multicast
filter handling.

Suggested by:	brad@OpenBSD.org
2015-01-12 07:37:06 +00:00
yongari
5635c91438 Fix a bug introdiced in r217548. According to NS DP83815 data
sheet, RX filter should be disabled before programming.
Previously it was clearing wrong bits so RX filter was not
disabled in RX filter configuration.

Reported by:	brad@OpenBSD.org
2014-12-16 06:13:30 +00:00
glebius
eb07b9761f Mechanically convert to if_inc_counter(). 2014-09-18 20:09:35 +00:00
glebius
9b93b159b3 Use define from if_var.h to access a field inside struct if_data,
that resides in struct ifnet.

Sponsored by:	Nginx, Inc.
2014-08-30 19:55:54 +00:00
hselasky
35b126e324 Pull in r267961 and r267973 again. Fix for issues reported will follow. 2014-06-28 03:56:17 +00:00
gjb
fc21f40567 Revert r267961, r267973:
These changes prevent sysctl(8) from returning proper output,
such as:

 1) no output from sysctl(8)
 2) erroneously returning ENOMEM with tools like truss(1)
    or uname(1)
 truss: can not get etype: Cannot allocate memory
2014-06-27 22:05:21 +00:00
hselasky
bd1ed65f0f Extend the meaning of the CTLFLAG_TUN flag to automatically check if
there is an environment variable which shall initialize the SYSCTL
during early boot. This works for all SYSCTL types both statically and
dynamically created ones, except for the SYSCTL NODE type and SYSCTLs
which belong to VNETs. A new flag, CTLFLAG_NOFETCH, has been added to
be used in the case a tunable sysctl has a custom initialisation
function allowing the sysctl to still be marked as a tunable. The
kernel SYSCTL API is mostly the same, with a few exceptions for some
special operations like iterating childrens of a static/extern SYSCTL
node. This operation should probably be made into a factored out
common macro, hence some device drivers use this. The reason for
changing the SYSCTL API was the need for a SYSCTL parent OID pointer
and not only the SYSCTL parent OID list pointer in order to quickly
generate the sysctl path. The motivation behind this patch is to avoid
parameter loading cludges inside the OFED driver subsystem. Instead of
adding special code to the OFED driver subsystem to post-load tunables
into dynamically created sysctls, we generalize this in the kernel.

Other changes:
- Corrected a possibly incorrect sysctl name from "hw.cbb.intr_mask"
to "hw.pcic.intr_mask".
- Removed redundant TUNABLE statements throughout the kernel.
- Some minor code rewrites in connection to removing not needed
TUNABLE statements.
- Added a missing SYSCTL_DECL().
- Wrapped two very long lines.
- Avoid malloc()/free() inside sysctl string handling, in case it is
called to initialize a sysctl from a tunable, hence malloc()/free() is
not ready when sysctls from the sysctl dataset are registered.
- Bumped FreeBSD version to indicate SYSCTL API change.

MFC after:	2 weeks
Sponsored by:	Mellanox Technologies
2014-06-27 16:33:43 +00:00
jhb
e8769d6be2 Fix various NIC drivers to properly cleanup static DMA resources.
In particular, don't check the value of the bus_dma map against NULL
to determine if either bus_dmamem_alloc() or bus_dmamap_load() succeeded.
Instead, assume that bus_dmamap_load() succeeeded (and thus that
bus_dmamap_unload() should be called) if the bus address for a resource
is non-zero, and assume that bus_dmamem_alloc() succeeded (and thus
that bus_dmamem_free() should be called) if the virtual address for a
resource is not NULL.

In many cases these bugs could result in leaks when a driver was detached.

Reviewed by:	yongari
MFC after:	2 weeks
2014-06-11 14:53:58 +00:00
brueffer
572e8e160e Remove some unused variables.
Found with:	Clang Static Analyzer
MFC after:	2 weeks
2014-05-16 21:19:17 +00:00
glebius
ff6e113f1b The r48589 promised to remove implicit inclusion of if_var.h soon. Prepare
to this event, adding if_var.h to files that do need it. Also, include
all includes that now are included due to implicit pollution via if_var.h

Sponsored by:	Netflix
Sponsored by:	Nginx, Inc.
2013-10-26 17:58:36 +00:00
yongari
c1c3be94b5 r119712 introduced SIS_TYPE_83816 but it was not actually set in
driver such that checking against the type was always false.
To detect NS DP83816, driver should have checked silicon revision
register for NS controllers. While here, remove SIS_TYPE_83816 to
not make the similar mistake again.

Reported by:	Brad Smith ( brad@openbsd )
2013-03-18 04:46:17 +00:00
glebius
a69aaa7721 Mechanically substitute flags from historic mbuf allocator with
malloc(9) flags in sys/dev.
2012-12-04 09:32:43 +00:00
dim
373133f0ad Remove duplicate const specifiers in many drivers (I hope I got all of
them, please let me know if not).  Most of these are of the form:

static const struct bzzt_type {
	[...list of members...]
} const bzzt_devs[] = {
	[...list of initializers...]
};

The second const is unnecessary, as arrays cannot be modified anyway,
and if the elements are const, the whole thing is const automatically
(e.g. it is placed in .rodata).

I have verified this does not change the binary output of a full kernel
build (except for build timestamps embedded in the object files).

Reviewed by:	yongari, marius
MFC after:	1 week
2012-11-05 19:16:27 +00:00
kevlo
41b065b8d4 ether_ifattach() sets if_mtu to ETHERMTU, don't bother set it again
Reviewed by:	yongari
2012-01-07 09:41:57 +00:00
marius
17e14c6132 - There's no need to overwrite the default device method with the default
one. Interestingly, these are actually the default for quite some time
  (bus_generic_driver_added(9) since r52045 and bus_generic_print_child(9)
  since r52045) but even recently added device drivers do this unnecessarily.
  Discussed with: jhb, marcel
- While at it, use DEVMETHOD_END.
  Discussed with: jhb
- Also while at it, use __FBSDID.
2011-11-22 21:28:20 +00:00
marius
b4610d98b0 - Import the common MII bitbang'ing code from NetBSD and convert drivers to
take advantage of it instead of duplicating it. This reduces the size of
  the i386 GENERIC kernel by about 4k. The only potential in-tree user left
  unconverted is xe(4), which generally should be changed to use miibus(4)
  instead of implementing PHY handling on its own, as otherwise it makes not
  much sense to add a dependency on miibus(4)/mii_bitbang(4) to xe(4) just
  for the MII bitbang'ing code. The common MII bitbang'ing code also is
  useful in the embedded space for using GPIO pins to implement MII access.
- Based on lessons learnt with dc(4) (see r185750), add bus barriers to the
  MII bitbang read and write functions of the other drivers converted in
  order to ensure the intended ordering. Given that register access via an
  index register as well as register bank/window switching is subject to the
  same problem, also add bus barriers to the respective functions of smc(4),
  tl(4) and xl(4).
- Sprinkle some const.

Thanks to the following testers:
Andrew Bliznak (nge(4)), nwhitehorn@ (bm(4)), yongari@ (sis(4) and ste(4))
Thanks to Hans-Joerg Sirtl for supplying hardware to test stge(4).

Reviewed by:	yongari (subset of drivers)
Obtained from:	NetBSD (partially)
2011-11-01 16:13:59 +00:00
yongari
4c371e596b Close a race where SIOCGIFMEDIA ioctl get inconsistent link status.
Because driver is accessing a common MII structure in
mii_pollstat(), updating user supplied structure should be done
before dropping a driver lock.

Reported by:	Karim (fodillemlinkarimi <> gmail dot com)
2011-10-17 19:49:00 +00:00
kevlo
6e85d84e2d Remove duplicate header includes 2011-06-28 08:36:48 +00:00
marius
d0f32374e6 - Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP
(reporting IFM_LOOP based on BMCR_LOOP is left in place though as
  it might provide useful for debugging). For most mii(4) drivers it
  was unclear whether the PHYs driven by them actually support
  loopback or not. Moreover, typically loopback mode also needs to
  be activated on the MAC, which none of the Ethernet drivers using
  mii(4) implements. Given that loopback media has no real use (and
  obviously hardly had a chance to actually work) besides for driver
  development (which just loopback mode should be sufficient for
  though, i.e one doesn't necessary need support for loopback media)
  support for it is just dropped as both NetBSD and OpenBSD already
  did quite some time ago.
- Let mii_phy_add_media() also announce the support of IFM_NONE.
- Restructure the PHY entry points to use a structure of entry points
  instead of discrete function pointers, and extend this to include
  a "reset" entry point. Make sure any PHY-specific reset routine is
  always used, and provide one for lxtphy(4) which disables MII
  interrupts (as is done for a few other PHYs we have drivers for).
  This includes changing NIC drivers which previously just called the
  generic mii_phy_reset() to now actually call the PHY-specific reset
  routine, which might be crucial in some cases. While at it, the
  redundant checks in these NIC drivers for mii->mii_instance not being
  zero before calling the reset routines were removed because as soon
  as one PHY driver attaches mii->mii_instance is incremented and we
  hardly can end up in their media change callbacks etc if no PHY driver
  has attached as mii_attach() would have failed in that case and not
  attach a miibus(4) instance.
  Consequently, NIC drivers now no longer should call mii_phy_reset()
  directly, so it was removed from EXPORT_SYMS.
- Add a mii_phy_dev_attach() as a companion helper to mii_phy_dev_probe().
  The purpose of that function is to perform the common steps to attach
  a PHY driver instance and to hook it up to the miibus(4) instance and to
  optionally also handle the probing, addition and initialization of the
  supported media. So all a PHY driver without any special requirements
  has to do in its bus attach method is to call mii_phy_dev_attach()
  along with PHY-specific MIIF_* flags, a pointer to its PHY functions
  and the add_media set to one. All PHY drivers were updated to take
  advantage of mii_phy_dev_attach() as appropriate. Along with these
  changes the capability mask was added to the mii_softc structure so
  PHY drivers taking advantage of mii_phy_dev_attach() but still
  handling media on their own do not need to fiddle with the MII attach
  arguments anyway.
- Keep track of the PHY offset in the mii_softc structure. This is done
  for compatibility with NetBSD/OpenBSD.
- Keep track of the PHY's OUI, model and revision in the mii_softc
  structure. Several PHY drivers require this information also after
  attaching and previously had to wrap their own softc around mii_softc.
  NetBSD/OpenBSD also keep track of the model and revision on their
  mii_softc structure. All PHY drivers were updated to take advantage
  as appropriate.
- Convert the mebers of the MII data structure to unsigned where
  appropriate. This is partly inspired by NetBSD/OpenBSD.
- According to IEEE 802.3-2002 the bits actually have to be reversed
  when mapping an OUI to the MII ID registers. All PHY drivers and
  miidevs where changed as necessary. Actually this now again allows to
  largely share miidevs with NetBSD, which fixed this problem already
  9 years ago. Consequently miidevs was synced as far as possible.
- Add MIIF_NOMANPAUSE and mii_phy_flowstatus() calls to drivers that
  weren't explicitly converted to support flow control before. It's
  unclear whether flow control actually works with these but typically
  it should and their net behavior should be more correct with these
  changes in place than without if the MAC driver sets MIIF_DOPAUSE.

Obtained from:	NetBSD (partially)
Reviewed by:	yongari (earlier version), silence on arch@ and net@
2011-05-03 19:51:29 +00:00
jhb
00c3c01f4f Do a sweep of the tree replacing calls to pci_find_extcap() with calls to
pci_find_cap() instead.
2011-03-23 13:10:15 +00:00
yongari
402820de72 Make sure changing ownership of RX descriptor to be done as last
operation.  Previously ownership was transferred to hardware before
setting address of new RX buffer such that it was possible for
hardware to use wrong RX buffer address.
While here keep compiler from re-ordering instructions by declaring
descriptor members volatile. Memory barriers would do the same job
but volatile is supposed to be cheaper than using memory barriers,
especially on MP systems.

Submitted by:	marius
MFC after:	1 week
2011-02-28 20:37:48 +00:00
yongari
c611bd5688 Rework RX filter programming by providing separate handler for
DP8381[56] and SiS 900/7016 controllers.  After r212119, sis(4) no
longer reinitializes controller if ALLMULTI/PROMISC was changed.
However, RX filter handling code assumed some bits of the RX filter
is programmed by driver initialization. This caused ALLMULTI/PROMISC
configuration is ignored under certain conditions.
Fix that issue by reprogramming all bits of RX filter register.
While I'm here follow recommended RX filter programming steps
recommended by National DP8381[56] data sheet(RX filter should be
is disabled before programming).

Reported by:	Paul Schenkeveld < freebsd () psconsult dot nl >
Tested by:	Paul Schenkeveld < freebsd () psconsult dot nl >
MFC after:	3 days
2011-01-18 17:50:14 +00:00
tijl
0f810ef0a2 Merge amd64 and i386 bus.h and move the resulting header to x86. Replace
the original amd64 and i386 headers with stubs.

Rename (AMD64|I386)_BUS_SPACE_* to X86_BUS_SPACE_* everywhere.

Reviewed by:	imp (previous version), jhb
Approved by:	kib (mentor)
2010-12-20 16:39:43 +00:00
yongari
5c504190d0 Correct handling of shared interrupt in sis_intr(). r212116 incorrectly
released a drver lock for shared interrupt case such that it caused
panic. While I'm here check whether driver is still running before
serving TX/RX handler.

Reported by:	Jerahmy Pocott < QUAKENET1 <> optusnet dot com dot au >
Tested by:	Jerahmy Pocott < QUAKENET1 <> optusnet dot com dot au >
MFC after:	3 days
2010-10-20 00:19:25 +00:00
marius
ac757f20dd Converted the remainder of the NIC drivers to use the mii_attach()
introduced in r213878 instead of mii_phy_probe(). Unlike r213893 these
are only straight forward conversions though.

Reviewed by:	yongari
2010-10-15 15:00:30 +00:00
yongari
da8f4a1650 Fix another bug introduced in r212109. We should unload DMA maps
only after sending the last fragment of a frame so the mbuf pointer
also should be stored in the last descriptor index.
2010-09-03 18:00:17 +00:00
yongari
bb4f975c36 Initial WOL support. NS DP8315 was tested but SiS900/SiS7016 was
not tested.
While I'm here, clean up SIOCSIFCAP handler.
2010-09-03 00:34:45 +00:00
yongari
f6865f86d4 Implement initial device suspend/resume method. 2010-09-02 22:37:13 +00:00
yongari
8d816531d8 Unlike most other controllers, NS DP83815/DP83816 controllers seem
to pad with 0xFF when it encounter short frames.  According to RFC
1042 the pad bytes should be 0x00.
Because manual padding consumes extra CPU cycles, introduce a new
tunable which controls the padding behavior. Turning this tunable
on will have driver pad manually but it's disabled by default. Users
can enable software padding by setting the following tunable to
non-zero value.

dev.sis.%d.manual_pad="1"

PR:	kern/35422 (patch not used)
2010-09-02 18:10:11 +00:00
yongari
90104df639 Fix the last endianness issue on handling station address which
prevented driver from working on big-endian machines. Also rewrite
station address programming to make it work on strict-alignment
architectures. With this change, sis(4) now works on sparc64 and
performance number looks good even though sis(4) have to apply
fixup code to align received frames on 2 bytes boundary on sparc64.
2010-09-02 17:51:41 +00:00
yongari
1fcf36ca19 Fix stupid error in r212109 which didn't swap DMA maps. This caused
IOMMU panic on sparc64 under high TX load.
2010-09-02 00:44:05 +00:00
yongari
bbb8b57633 Move sis_reset() to sis_initl(). This ensures driver starts with
known good state of controller.
2010-09-01 22:50:11 +00:00
yongari
3d51d3dedf Avoid controller reinitialization which could be triggered by
dhclient(8) or alias addresses are added.

PR:	kern/87506
2010-09-01 22:16:25 +00:00
yongari
7e669b1d63 Do not reinitialize controller whenever promiscuous mode or
allmulti is toggled. Controller does not require reinitialization.
This removes unnecessary controller reinitialization whenever
tcpdump is used.
While I'm here remove unnecessary variable reinitialization.
2010-09-01 22:08:23 +00:00
yongari
481f78e425 Report result of link state change to caller. Previously it always
returned success.
2010-09-01 21:44:36 +00:00
yongari
4d98740d79 Overhaul link state change handling. Previously sis(4) blindly
configured TX/RX MACs before getting a valid link. After that, when
link state change callback is called, it called device
initialization again to reconfigure TX/RX MACs depending on
resolved link state. This hack created several bad side effects and
it required more hacks to not collide with sis_tick callback as
well as disabling switching to currently selected media in device
initialization. Also it seems sis(4) was used to be a template
driver for long time so other drivers which was modeled after
sis(4) also should be changed.

TX/RX MACs are now reconfigured after getting a valid link. Fix for
short cable error is also applied after getting a link because it's
only valid when the resolved speed is 100Mbps.

While I'm here slightly reorganize interrupt handler such that
sis(4) always read SIS_ISR register to see whether the interrupt is
ours or not. This change removes another hack and make it possible
to nuke sis_stopped variable in softc.
2010-09-01 21:42:19 +00:00
yongari
4525889ed3 s/u_intXX_t/uintXX_t/g 2010-09-01 19:53:15 +00:00
yongari
0b65f62811 bus_dma(9) cleanup.
o Enforce TX/RX descriptor ring alignment. NS data sheet says the
   controller needs 4 bytes alignment but use 16 to cover both SiS
   and NS controllers. I don't have SiS data sheet so I'm not sure
   what is alignment restriction of SiS controller but 16 would be
   enough because it's larger than the size of a TX/RX descriptor.
   Previously sis(4) ignored the alignment restriction.
 o Enforce RX buffer alignment, 4.
   Previously sis(4) ignored RX buffer alignment restriction.
 o Limit number of TX DMA segment to be used to 16. It seems
   controller has no restriction on number of DMA segments but
   using more than 16 looks resource waste.
 o Collapse long mbuf chains with m_collapse(9) instead of calling
   expensive m_defrag(9).
 o TX/RX side bus_dmamap_load_mbuf_sg(9) support and remove
   unnecessary callbacks.
 o Initial endianness support.
 o Prefer local alignment fixup code to m_devget(9).
 o Pre-allocate TX/RX mbuf DMA maps instead of creating/destroying
   these maps in fast TX/RX path. On non-x86 architectures, this is
   very expensive operation and there is no need to do that.
 o Add missing bus_dmamap_sync(9) in TX/RX path.
 o watchdog is now unarmed only when there are no pending frames
   on controller. Previously sis(4) blindly unarmed watchdog
   without checking the number of queued frames.
 o For efficiency, loaded DMA map is reused for error frames.
 o DMA map loading failure is now gracefully handled. Previously
   sis(4) ignored any DMA map loading errors.
 o Nuke unused macros which are not appropriate for endianness
   operation.
 o Stop embedding driver maintained structures into descriptor
   rings. Because TX/RX descriptor structures are shared between
   host and controller, frequent bus_dmamap_sync(9) operations are
   required in fast path. Embedding driver structures will increase
   the size of DMA map which in turn will slow down performance.
2010-09-01 19:33:40 +00:00
yongari
7c4a1c6ffa Nuke unnecessary return at the end of function. 2010-09-01 18:41:59 +00:00
yongari
6dbf203b91 style(9) - space after keywords. 2010-09-01 18:39:35 +00:00
yongari
888a1feebb Remove leading and trailing white spaces.
No functional changes.
2010-09-01 18:28:08 +00:00
brucec
659eae4cbc It's not necessary to reset the chip every time an input overflow event
occurs. In addition, the delay when programming the short cable fix
should be 100us, not 100ms.

PR:	kern/64556
Submitted by:	Thomas Hurst <tom at hur.st>
Approved by:	rrs (mentor)
MFC after:	1 week
2010-04-20 19:30:12 +00:00
rwatson
be5740a255 Use if_maddr_rlock()/if_maddr_runlock() rather than IF_ADDR_LOCK()/
IF_ADDR_UNLOCK() across network device drivers when accessing the
per-interface multicast address list, if_multiaddrs.  This will
allow us to change the locking strategy without affecting our driver
programming interface or binary interface.

For two wireless drivers, remove unnecessary locking, since they
don't actually access the multicast address list.

Approved by:	re (kib)
MFC after:	6 weeks
2009-06-26 11:45:06 +00:00
attilio
b523608331 When user_frac in the polling subsystem is low it is going to busy the
CPU for too long period than necessary.  Additively, interfaces are kept
polled (in the tick) even if no more packets are available.
In order to avoid such situations a new generic mechanism can be
implemented in proactive way, keeping track of the time spent on any
packet and fragmenting the time for any tick, stopping the processing
as soon as possible.

In order to implement such mechanism, the polling handler needs to
change, returning the number of packets processed.
While the intended logic is not part of this patch, the polling KPI is
broken by this commit, adding an int return value and the new flag
IFCAP_POLLING_NOCOUNT (which will signal that the return value is
meaningless for the installed handler and checking should be skipped).

Bump __FreeBSD_version in order to signal such situation.

Reviewed by:	emaste
Sponsored by:	Sandvine Incorporated
2009-05-30 15:14:44 +00:00
yongari
a018b9ee88 Receving VLAN oversized frames raise SIS_ISR_RX_ERR interrupt, so
make sis_rxeof() handle that too. Previously it used to receive the
frame and reset controller.

PR:	kern/131414
2009-02-13 02:08:20 +00:00
imp
556b4fb046 Fix shutdown prototypes. 2009-02-10 23:17:20 +00:00
yongari
fe87e41d4b Fix a long standing VLAN tagged frame handling bug.
When VLAN tagged frame is received the hardware sets 'LONG' bit of
Rx status word. It is always set when the size of received frame
exceeded 1518 bytes, including CRC. This VLAN tagged frame clears
'OK' bit of Rx status word such that driver should not rely on 'OK'
bit of Rx status word to pass the VLAN tagged frame to upper stack.

To fix the bug, don't use SIS_CMDSTS_PKT_OK for Rx error check and
introduce SIS_RXSTAT_ERROR macro that checks Rx errors. If we are
configured to accept VLAN tagged frames and the received frame size
is less than or equal to maximum allowed length of VLAN tagged
frame, clear 'LONG' bit of Rx status word before checking Rx
errors.

Reported by:	Vladimir Ermako	< samflanker <> gmail DOT com >
Tested by:	Vladimir Ermako	< samflanker <> gmail DOT com >
2008-12-09 04:30:47 +00:00
imp
4115689c51 There actually were bugs in the original handling that I missed last
night.

Free the children after each pci bus that is searched.  Otherwise we
leak them.  With free in the new place, we also have to free children
before going to done when we find the device we're looking for.

Also, if we can't get the children of a device, just ignore that bus.
2008-08-23 15:34:31 +00:00
imp
b06e92ed28 Actually revert last... Upon closer inspection the code works in the
face of errors already...  A bit unorthodox, but none-the-less valid.
2008-08-23 07:43:03 +00:00
imp
8d9d4a6dea Handle errors in device_get_children gracefully. 2008-08-23 07:41:21 +00:00