The default 80MHz clock speed returned by bhnd_pmu_si_clock() was already
correct; this just prevents the "No backplane clock specified" warning
printf from being emitted when querying backplane clock speed.
Sponsored by: The FreeBSD Foundation
Consolidate the regions covered by the process lock.
Combine similar conditions tests into one, e.g. all process flags can
be test with one logical operation.
Add check for in-exec state, since p_vmspace is dererenced.
Remove labels and goto by explicitly tracking state.
Update comments.
Reviewed by: alc, markj (previous version)
Tested by: pho (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D13693
its per-thread kernel stack pages by making them pass through the inactive
queue first. Instead, immediately place them in the laundry so that they
might be cleaned and made available for reclamation sooner.
Reviewed by: kib, markj
MFC after: 1 week
The data segement was too big.
Add a fix-up function like on ia32 for MAXDSIZ.
While here, bring also the MAXSSIZ closer to amd64 and add an equal fix-up
function for MAXSSIZ.
Reviewed by: jhibbits@
Obtained from: jhibbits@
Differential Revision: https://reviews.freebsd.org/D13753
SDM editions 64 and below stated that it is enough to use MFENCe or
LFENCE to serialize x2APIC register writes. New edition 65 requires
either full serialization instruction or MFENCE;LFENCE sequence. Use
the later, FreeBSD needs serialization to ensure that writes done
before IPI request are visible to the target IPI CPU.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Enable the hardclock-based watchdog previously conditional on the
SW_WATCHDOG option whenever hardware watchdogs are not found, and
watchdogd attempts to enable the watchdog. The SW_WATCHDOG option
still causes the sofware watchdog to be enabled even if there is a
hardware watchdog. This does not change the other software-based
watchdog enabled by the --softtimeout option to watchdogd.
Note that the code to reprime the watchdog during kernel core dumps is
no longer conditional on SW_WATCHDOG. I think this was previously a bug.
Reviewed by: imp alfred bjk
MFC after: 1 week
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D13713
Apply the fix from r327499 to additional ioctl handlers.
Reported by: Ilja van Sprundel <ivansprundel@ioactive.com>
MFC after: 1 week
MFC with: r327499
Sponsored by: The FreeBSD Foundation
The ath_btcoex_ioctl handler allocated a buffer without M_ZERO and
returned it to userland without writing to it.
The device has permissions only for root so this is not urgent, and the
fix can be MFCd and considered for a future EN.
Reported by: Ilja van Sprundel <ivansprundel@ioactive.com>
Submitted by: Domagoj Stolfa <domagoj.stolfa@gmail.com>
Reviewed by: adrian
MFC after: 1 week
The hpt{nr,rr} ioctl handler allocates a buffer without M_ZERO and calls
hpt_do_ioctl(), which might not overwrite the entire buffer.
Also zero bytesReturned in case it is not written by hpt_do_ioctl().
The hpt27{nr,rr} device has permissions only for root so this is not urgent,
and the fix can be MFCd and considered for a future EN.
The same issue was reported in the hpt27xx driver by Ilja Van Sprundel.
Reviewed by: jhb, kib
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
The hpt27xx ioctl handler allocates a buffer without M_ZERO and calls
hpt_do_ioctl(), which might not overwrite the entire buffer.
Also zero bytesReturned in case it is not written by hpt_do_ioctl().
The hpt27xx device has permissions only for root so this is not urgent,
and the fix can be MFCd and considered for a future EN.
Reported by: Ilja van Sprundel <ivansprundel@ioactive.com>
Submitted by: Domagoj Stolfa <domagoj.stolfa@gmail.com> (M_ZERO)
Reviewed by: jhb, kib
MFC after: 3 days
Security: info leak in root-only ioctl
Sponsored by: The FreeBSD Foundation
- BIO_FLUSH requests were dispatched to the disks directly from
g_mirror_start() rather than going through the mirror's I/O request
queue, so they could have been reordered with preceding writes.
Address this by processing such requests from the queue, avoiding
direct dispatch.
- Handling for collisions with synchronization requests was too
fine-grained and could cause reordering of writes. In particular,
BIO_ORDERED was not being honoured. Address this by effectively
freezing the request queue any time a collision with a synchronization
request occurs. The queue is unfrozen once the collision with the
first frozen request is over.
- The above-mentioned collision handling allowed reads to jump ahead
of writes to the same offset. Address this by freezing all request
types when a collision occurs, not just BIO_WRITEs and BIO_DELETEs.
Also add some more fail points for use in testing error handling.
Reviewed by: imp
MFC after: 3 weeks
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D13559
rather than kmem arena size to determine available memory.
Initialize the UMA limit to LONG_MAX to avoid spurious wakeups on boot before
the real limit is set.
PR: 224330 (partial), 224080
Reviewed by: markj, avg
Sponsored by: Netflix / Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D13494
This removes the direct WME info access in the ieee80211com struct and instead
provides a method of fetching the data. Right now it's a no-op but eventually
it'll turn into a per-VAP method for drivers that support it (eg iwn, iwm,
upcoming ath10k work) as things like p2p support require this kind of behaviour.
Tested:
* ath(4), STA and AP mode
TODO:
* yes, this is slightly stack size-y, but it is an important first step
to get drivers migrated over to a sensible WME API. A lot of per-phy things
need to be converted to per-VAP before P2P, 11ac firmware, etc stuff shows up.
It does not change anything in the behavior of trap_pfault(), while
eliminating obfuscation of jumping to the code which checks for the
condition reversed of the goto cause. Also avoid force initialize the
rv variable, since it is now only accessed after storing vm_fault()
return value.
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D13725
On a load where single anonymous object consumes almost all memory on
the large system, swapout code executes the iteration over the
corresponding object page queue for long time, owning the map and
object locks. This blocks pagedaemon which tries to lock the object,
and blocks other threads in the process in vm_fault() waiting for the
map lock.
Handle the issue by terminating the deactivation loop if we executed
too long and by yielding at the top level in vm_daemon.
Reported by: peterj, pho
Reviewed by: alc
Tested by: pho (as part of the larger patch)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D13671
is now unobtanium. It's only had API changes in the last 7 years, and
is responsible for a very large number of them. In addition, there's a
lot of code that reimplements base FreeBSD functionality, diminishing
the chances it still works. Without hardware to teset it on, or
prospects of obtaining such hardware and without vendor support, it's
time to move on.
Suggested by: kan@ in mips@ retirement discussion
it's at least 5 years out of production. I couldn't find a used one on
ebay and other secondary markets just now, nor when I tried 4 years
ago. It dates from the initial project/mips2 merge 8 years ago, and
hasn't been updated since.
Discussed on: mips@ (with some dissent)
It came into the tree with the project/mips merge 8 years ago. At the
time, it was hard to find a board with enough RAM to run. Now FreeBSD
requires at least 2x the RAM it did then. No changes have happened to
this port apart from API churn and license tagging since then. It ran
OK at the time it was committed, but no sightings in the wild have
happened since shortly after it was committed.
https://www.linux-mips.org/wiki/Adm5120_devices lists a bunch of
boards that were available 5 years ago (but are no longer
available). The beefiest one had only 64MB of RAM which is too
small. The Mirktik RB1xx never had more than 32MB.
Also remove confusing QEMU config file that never ever worked in QEMU
for mips. MALTA is used for that. Another of my past mistakes, false
starts that never amounted to anything.
Discussed on: mips@ (with some dissent)
never got better. It never worked on real hardware and is still mostly
stubs after 8 years when I added it. It has had no real update in that
time apart from API churn. It was added just so it didn't get lost in
the project/mips merge, but maybe it should have been lost as nothing
has come of it. It is time to give up the ghost on this one.
Approved by: me, shooting my own dog
Discussed on: mips@
bool indicating whether the input value represents a valid BCD byte.
The existing bcd2bin() routine will KASSERT if asked to convert a bad value,
but sometimes the kernel has to handle BCD data from untrusted sources, so
this will provide a mechanism to validate data before attempting conversion.
This would be have easier/cleaner if the bcd2bin_data[] array contained an
out-of-range value (such as 0xff) in the infill locations that aren't valid,
but it's a global symbol that might be referenced by out-of-tree code
relying on the current scheme, so I'm leaving that alone.
Newer Allwinner SoCs have nearly identical SID controllers with efuse space
starting at 0x200 into their register space and thermal data available at
0x234, making all of these fairly trivial additions.
The h3 will be added at a later time after some testing, due to a silicon
bug that causes the rootkey (at least) to be read incorrectly unless first
read via the control register.
introduction in r83366. (At that time, this code appeared in vm/vm_glue.c,
because vm/vm_swapout.c did not exist.) When the FOREACH_THREAD loop
completes, we know that the sleep time for every thread is above whichever
threshold is being applied.
Reviewed by: kib
X-MFC with: r327354
During review iterations function signature has changed in definition
but not in actual call. Fix call to match the definition.
Reported by: Herbert J. Skuhra
Pointyhat to: gonzo
MFC after: 2 weeks
This is necessary because some non-kernel code #defines _KERNEL and then
includes kernel headers; as a result, it was getting conflicting versions
of curthread and curproc. Non-kernel code should probably refrain from
defining _KERNEL, but for now hiding these indirect inclusions fixes the
build.
Reported by: Michael Butler, Herbert J. Skuhra
is of limited utility outside of platform-specific code and can vary
at runtime when running as a hypervisor guest, so does not even have the
virtue of being a static identifier.
Reviewed by: jhibbits
Introduce new set of loader tunables kern.vt.color.N.rgb, where N is a
number from 0 to 15. The value is either comma-separated list decimal
numbers ranging from 0 to 255 that represent values of red, green, and
blue components respectively (i.e. "128,128,128") or 6-digit hex triplet
commonly used to represent colors in HTML or xterm settings (i.e. #808080)
Each tunable overrides one of the 16 hardcoded palette codes and can be set
in loader.conf(5)
Reviewed by: bcr(docs), jilles, manu, ray
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D13645
are places where the "main thread" of the booting kernel (either the
thread which later becomes swapper or the thread which later becomes
init) has to stop and wait for action to take place in another thread
before continuing.
There are currently three such holds:
1. The intr_config_hooks SYSINIT waits for hooks registered via the
config_intrhook_establish function; this allows (typically) devices
which need interrupts enabled to complete their initialization to do
so before root is mounted.
2. The g_waitidle function waits for the GEOM event queue to be empty;
this ensures that all of the disks which have been attached have been
tasted before we attempt to mount root.
3. The vfs_mountroot_wait function (in addition to calling g_waitidle)
waits for holds registered via root_mount_hold; among other things, this
is used by the USB subsystem to ensure that we don't fail to mount root
if it's located on a USB disk which takes a while to probe.
