under way to move the remnants of the a.out toolchain to ports. As the
comment in src/Makefile said, this stuff is deprecated and one should not
expect this to remain beyond 4.0-REL. It has already lasted WAY beyond
that.
Notable exceptions:
gcc - I have not touched the a.out generation stuff there.
ldd/ldconfig - still have some code to interface with a.out rtld.
old as/ld/etc - I have not removed these yet, pending their move to ports.
some includes - necessary for ldd/ldconfig for now.
Tested on: i386 (extensively), alpha
KAME did the modification only to _dns_getaddrinfo(). However,
it is not sufficient, and res_queryN() should be modified, too.
So, I did same modification to res_queryN().
Obtained from: KAME
insure enough space is available for the response, or be prepared
to resize the buffer and retry as necessary.
Do the conservative thing and make sure enough space is available.
Reviewed by: silence on freebsd-audit
When it is called directly, gcc is smart enough to generate inline
code for it, which is why it wasn't noticed before that it was missing.
fabs() would probably better fit into libm, but it has traditionally been
in libc on FreeBSD, so there is probably software around that makes
assumptions about this by now.
of pointers to strings. These two arrays were fixed to the same size, but one
had an implicit zeroed trailer element, which was unused because the size was
used up by the ones before said zeroed trailer element. So the unused limb was
chopped off the over-sized-but-not-over-sized array, and everyone lived happily
ever after.
instead of on startup. This fixes binary compatibility of dynamically
linked binaries from before the signal code move.
Suggested by: wollman (a long time ago)
than 32 bits. It was trying to figure out things like the day of week
of when time_t is roughly 2^62 etc. Make a better guess for the starting
point for the binary search that works on both 32 and 64 bit types. I have
been using this for a while now.
bcopy(3) functions are prototyped in <strings.h> and not in
<string.h> anymore.
- Add a sentence about that to the respective HISTORY sections.
In the C source files:
- Include <string.h> or <strings.h> depending on what function
is to be compiled.
- Use ANSI-C function definitions.
.In string.h
with
.In strings.h
and adding a sentence to the HISTORY section.
- Use an ANSI-C function definition.
- Include <strings.h> instead of <string.h>.
- Apply style(9): Put a space after return keywords.
in the ANSI-C format.
- Change the code a bit to hopefully save some cycles.
I.e. (simplified) change
a = b + 1;
while (--b & 0x7)
/* ... */
to
a = b;
for (; b & 0x7; b--)
/* ... */
and
while (--a >= 0)
/* ... */
to
for (; a > 0; a--)
/* ... */
- Equip two function arguments of swab() with the 'restrict'
type qualifier in form of the '__restrict' macro. This is
specified by POSIX.1-2001.
<strings.h> as the associated header file.
The prototypes have been moved there from <string.h> because
POSIX.1-2001 said so.
- Conditionally include either <strings.h> or <string.h> based
on whether the [r]index() or str[r]chr() functions are
compiled, respectively.
- Style(9) tells us to
- put a space after the return keyword
- to check for a NUL character without using the ! operator.
- use NULL instead of (type *)NULL where the compiler knows
the type.
Apply these rules.
- Rather use ANSI-C function definitions than K&R ones.
- For index(3), correct second function argument's type; it was
declared to be a `const char' before and is now an `int'.
is <strings.h> and not <string.h> anymore.
- Tell the reader about this change in the HISTORY section.
- Switch to use an ANSI-C function definition.
- Include <strings.h> instead of <string.h> in the source file.
the prototypes for both functions are now in the <strings.h>
header, as required by IEEE Std 1003.1-2001.
- Add one sentence about that in the HISTORY section.
- Include <strings.h> in the source file to have the prototypes
in scope when the _ANSI_SOURCE macro is defined.
to fail needlessly if a reverse DNS lookup of the IP address didn't
come up with a hostname. As a comment in the code clearly stated,
the "damn hostname" was looked up only for the purpose of netgroup
matching. But if that lookup failed, the function bailed out
immediately even though in many cases netgroup matching would not
be used.
This change marks the hostname as unknown but continues. Where
netgroup matching is performed, an unknown hostname is handled
conservatively. I.e., for "+@netgroup" (accept) entries an unknown
hostname never matches, and for "-@netgroup" (reject) entries an
unknown hostname always matches.
In the lines affected (only), I also fixed a few bogus casts. There
are others, and in fact this entire file would be a good candidate
for a cleanup sweep.
Reviewed by: imp (wearing his flourescent yellow Security Team cap)
MFC after: 2 days
called <machine/_types.h>.
o <machine/ansi.h> will continue to live so it can define MD clock
macros, which are only MD because of gratuitous differences between
architectures.
o Change all headers to make use of this. This mainly involves
changing:
#ifdef _BSD_FOO_T_
typedef _BSD_FOO_T_ foo_t;
#undef _BSD_FOO_T_
#endif
to:
#ifndef _FOO_T_DECLARED
typedef __foo_t foo_t;
#define _FOO_T_DECLARED
#endif
Concept by: bde
Reviewed by: jake, obrien
disklabel.h; broken originally by 1.87 of sys/disklabel.h, which
made the split between DKTYPENAMES and FSTYPENAMES.
Someone who knows disklabel.c: do we still need DKTYPENAMES to be
defined here now?
supplied buffer in case the size of it was equal to
the number of characters the converted address consumed.
The bug occurred when converting an AF_INET address.
- Remove the SPRINTF macro and use sprintf instead.
- Do not do string formatting using sprintf(3) and a
temporary buffer which is copied when the supplied
buffer provides enough space. Instead, use snprintf(3)
and the real destination buffer, thus avoid the copy.
Reported by: Stefan Farfeleder <e0026813@stud3.tuwien.ac.at> (1)
PR: misc/41289
definitions of the functions that convert strings to numbers
and are defined by IEEE Std 1003-1.2001.
- Use ANSI-C function definitions for all of the functions
mentioned above plus strtouq and strtoq.
- Update the prototypes in the manual pages.
public prototypes of setbuf(3) and setvbuf(3) using the
'__restrict' macro from <sys/cdefs.h> to be compliant with
IEEE Std 1003.1-2001.
- Replace the K&R with ANSI-C function definitions.
- Bring the manual page up-to-date.
strftime(3) for IEEE Std 1003.1-2001 compliance and remove
excessive usage of the 'const' qualifier that was neither
present in the prototype in the publice header, nor in the
local prototype just above the function definition.
- Replace the K&R function definition with a ANSI-C one.
- Update the prototype of strftime(3) in its manual page.
concatenation and copy functions using the '__restrict' macro.
This is to satisfy IEEE Std 1003-1.2001.
- Use ANSI-C function definitions.
- Add the 'restrict' keyword to the manual pages, too.
to the function definition of strxfrm(3) in form of our
'__restrict' macro.
- Use an ANSI-C function definition for strxfrm(3).
- Change the manual page accordingly.
of our __restrict macro to the prototypes and function
definitions of inet_pton and inet_ntop.
- Use ANSI-C function argument lists.
- Adjust the prototypes in the manual page.
