block sizes.
This orginally worked in PAO-3 and worked on their r330 branch but got
broken in PAO-3 around December 1998!
Approved by: imp
Obtained from: PAO-3
IRQs from kernel.''..
With IBM ThinkPad600. ``sio1'' was disabled in BIOS
and irq 3 was free (also not listed in dmesg), I think.
But I could not use irq 3 for PC-Card with new(PIOCSRESOURCE
ioctl enabled) pccardd.
- If resource which was allocated for pcic was
requested via this ioctl, bus_alloc_resource
would be succeeded and that resource was
returned as free resource. So check whether
requested resource was used for pcic or not
before bus_alloc_resource test.
- merge SYS_RES_IRQ routine into other SYS_RES_*
routine and clean up.
problem reported by: Yohei Terada <terada@jiro.c.u-tokyo.ac.jp>
log insert/remove events using the logstr, if specified for that card,
or the manufacturer + version strings from the cis if not. This
eliminates the need to have logger in the pccard.conf file which makes
it easier to move pcardd to /sbin later if we need to. This also
reduces the pccard.conf file size from 53k to 28k, which will help the
install disk a little.
Also, minor cleanup of free usage (if (x != NULL) free(x); is
identical to free(x); for all versions of C that we care about).
Reviewed by: iwasaki (who proposed the logstr keyword).
Documentation and fixes to pccard.conf to follow.
- This feature will be enabled only if the string is
enclosed by '/' something like;
card "SunDisk" "/.*/"
- Also added matching additional information strings
followed by version string. This is for the card which is
difficult to idendentify by only the manufacturer and
card version strings matching.
card "MACNICA" "MIRACLE SCSI" "mPS100" "D.0"
Reviewed by: imp
Obtained from: PAO
This should solve tentatively the pccardd core dump problem when
there's no CIS (likely CardBus cards).
Later, this function will have regex CIS string comparison capability
too.
Obtained from: PAO
- Fixed bogus CIS tuple dumping (Network node ID, IRQ modes and etc.)
- Include telling drivers ethernet address if Network node ID
tuple is available. This is usefull for some bogus ehter cards which
can't get correct ethernet address from CIS tupple.
Obtained from: PAO3
(resource and card configuration being used) is to be maintained for
consistency. Part of resource pool re-initialization would be rewrite
later using on Warner-san's hints driver API :-)
Reviewed by: nate, imp and -nomads ML in Japan.
Obtained from: http://www.freebsd.org/~iwasaki/pccard/pccardd-signal.diff
Commited at: BSD HANAMI Party 2000 in Japan
/etc/defaults/pccard.conf in pccardd. But system default pccardd
config file is still /etc/pccard.conf.sample specified in /etc/rc.conf
for the testing this changes.
- improved `include' keyword function for error handling.
- now that resource pool (io, irq, mem) can be overridden.
- pccard config entries is searched following the first match rule if
there are more than two entries which have the same card identifier.
Note that the /etc/defaults/pccard.conf related files is not committed
at this time, will come a week later. I'll prepare the test version
of /etc/defaults/pccard.conf, /etc/pccard.conf and other files soon.
Reviewed by: imp and nomads in Japan.
member variable to find the configuration on new driver allocation.
Correct condition is that card_config and driver are not in use. Both
of them are cleared in card_removed() (conf->driver->card never be
cleared).
This fix problems `No free configuration for card' on insertion, and
pccardd core dump on removal in condition of the same driver but
different card.
Also this might be emergency measures, complete solution would be made
after Hosokawa-san come back.
Consulted with: imp
Waiting for: hosokawa
For example, when /etc/pccard.conf had ed0 in config line, but kernel
refused this name and said
devclass_alloc_unit: ed0 already exists, using next availale unit
number
Kernel used ed1 as device name and it did not match with config and
insert/remove lines. Fortunately, dhclient was called without args,
and it works, but if we wanted to use static IP address for PC-card,
it did not work.
This modification makes pccardd to execute insert/remove lines with
the true device name that returns from kernel. (Last change to
etc/pccard.conf.sample eliminated all hardwired device name from
insert/remove lines in /etc/pccard.conf)
is a race here that the old code didn't deal with, and I'm not
completely sure this is the right way to solve it, but it works here.
Should get rid of the dreaded "No free configuration for card" message.
section we take them from to be up to 255 bytes long, so that's the
max size for the string. They can't all be this big, but I don't have
a better number and better to be a little long than a little short.
Also only consume len characters of the cis buffer so we don't run off
the end into the next buffer and get garbage. This second patch
shouldn't impact anything, but I'll hold off back porting this to
-stable until I get more reports on the stability before/after this
fix.
individual slots at one's whim. Useful for turning the slots into
card carrying cases, etc. Patch was originally from mihira-san in
message to freebsd-mobile. He ported the code originally from PAO.
Submitted by: MIHIRA Sanpei Yoshiro <sanpei@sanpei.org>
o Document debug level keyword
o Implement debug level:
o For most of the diagnostic messages, change them from #ifdef DEBUG
to if (debuglevel > 0).
o Add a couple more diagnostic messages that weren't present before
o Fix a couple of excessively long lines.
Reviewed by: hosokawa-san
o Start to implement the stopgap kludge for -current's pccard code by passing
the length of the i/o range. If DEV_DESC_HAS_SIZE is defined, we'll set
the size. This is done as an ifdef so that I can generate patches
against the kernel more easily.
o Add preliminary support for tweaking sleep times, but leave it
disabled until a good range of values can be established.
Didn't fix: logmsg problem noted by Nate.
Allocate free I/O window with given size to card.
(example)
# IBM PCMCIA Ethernet I/II
card "IBM Corp." "Ethernet"
config 0x1 "ed0" ?
iosize 32
ether 0xff0
(it's currently only useful for externalizing hacks for broken CIS cards,
but it will play an important role with "function" directive I'm planninng
to merge)
Reviewed by: freebsd-mobile list
Obtained from: PAO3's "cardio" directive
track.
The Id line is normally at the bottom of the main comment block in the
man page, separated from the rest of the manpage by an empty comment,
like so;
.\" $Id$
.\"
If the immediately preceding comment is a @(#) format ID marker than the
the $Id$ will line up underneath it with no intervening blank lines.
Otherwise, an additional blank line is inserted.
Approved by: bde
Obtained from: PAO (written in Japanese)
Reviewed by: bsd-nomads@clave.gr.jpfreebsd-mobile@freebsd.org
Randy Bush <randy@psg.com>
Bill Trost <trost@grey.cloud.rain.com>
Bruce Campbell <bc@apnic.net>
before printing it. Terminate when we come to a 0xff byte. This
allows there to be zero or more additional info fields printed
correctly. Before, the old code would print bogons or dump core when
presented with this case.
I don't know what the spec says about this, exactly, but this allows
me to do a dumpcis of my non-ATA AMP 4M FLASH cards w/o pccardc
dumping core.
change it w/out informing the program. Instead, use the (now available)
previous state returned by the kernel to make intelligent card
removal/insertion decisions.
pccard claims that the driver is already allocated.
It works around a race when pccardd gets woken up too late after a resume.
This is a 2.2.6 candidate.
Reviewed by: nate@freebsd.org
since we only store CIS_MAXSTR data, and the users may stick the
'entire' CIS string returned from the card in /etc/pccard.conf and
cause the comparison to (bogusly) fail.
Submitted by: Brad Karp <karp@eecs.harvard.edu>
instead Do The Right Thing when the kernel states a card was
inserted/removed. This isn't a complete fix, but better than nothing.
Reviewed by: Guido van Rooij <guido@gvr.org>
