- Read the database from /usr/share/misc (or wherever else we're pointed)
rather than compiling it in.
- Decode the class/subclass fields if requested.
- Print things in a slightly longer but more readable format.
make sure there is exactly one prototype for each function,
use K&R style definitions everywhere to match dominant style,
make flag_signal take an int to avoid problems if we have
ANSI prototypes and K&R definitions.
files. Mostly -I${.CURDIR} was needed -- especially for YACC generated
files as the new cpp does not look in the ultimate source file
(ie, the .y file)'s directory as told by the "#line" directive. Some were
misspellings of "-I${.CURDIR}" as "-I.".
/usr/obj hardwired in the code, now you can override it
with a command line option or MAKEOBJDIRPREFIX env. variable.
The above is useful to build picobsd-specific objects in some other
place than /usr/obj
While at it, fix documentation and change a few sprintf -> snprintf.
ppp descriptor and signals the terminal thread when there's something
to read on that descriptor.
This means that the main loop doesn't have to alarm() itself into
dropping out of el_gets() frequently to check the descriptor. This
dropping out was disturbing syscons (via ioctl()s from libedit) enough
to reset the screensaver timeout every .5 of a second.
PR: 20345
root's groups' permissions were being used, so a user could read up to
16 (excluding initial whitespace) bytes of e.g. a wheel-accessible file.
Also, don't allow blocking on the opening of ~/.fakeid, so replace a fopen()
with open() and fdopen(). I knew I'd be going to hell for using C file
streams instead of POSIX syscalls...
for your /usr/obj/path/to/my/files path to the kernel, then weird
things happened. make buildkernel would fail because config was
dumping core or generating bad file names (depending on the lenght of
the path).
While I was here, also use strlcpy, strlcat and snprintf (or asprintf)
as necessary. Minor format policing for the snprintf calls as well.
Address this by using getpwnam(), thus killing several birds with
the same stone. My fix is slightly more aggressive than the
originators. :)
PR: misc/22278
of the data structures to include new members that weren't defined in the
manual I have.
I opted to use Doug Ambrisko's WEP patches since David Cornejo's patches
did not include the necessary changes to ancontrol(8) to actually enable
and use WEP.
NOTE: I don't currently have access to an Aironet card, so I can't test
any of this. Everything compiles and close scrutiny doesn't reveal any
obvious problems, but Murphy's Law applies. This means I will probably
leave these changes in -current for a bit longer than usual until I'm
sure they work right.
done, so the correct directory is being checked. The mkstemp() call
is meant to create a temp file for stderrs when running filters. This
update also fixes log-file processing for remote (rm=) queues which
specify an input filter (if=). Before, filter-errs were thrown away.
Now they'll be copied to the queue's logfile (lf=).
Reviewed by: (a little) audit@FreeBSD.ORG & freebsd-print@bostonradio.org
This is based on wicontrol. Duncan updated it for raylan. I've
updated this to the latest wicontrol. In addition, to make it kinda
compatible with ifconfig, you can give the interface name w/o the -i.
Submitted by: duncan barclay
This allows build flags to be specified for a particular program from
within the crunch.conf file, eg:
prog ppp
special ppp buildopts -DNOKLDLOAD -DNOINET6 -DNONAT -DNOATM
This adds '-DNOKLDLOAD -DNOINET6 -DNONAT -DNOATM' to make targets
related to ppp when determining which object files to build and
when calculating dependencies and building the targets.
* Adjust a little whitespace
* Make the distrib-dirs/mtree on DESTDIR conditional on user
actually specifying a DESTDIR. This seemed like a safe
way to get the right directories and permissions in the
installed tree since 'make installworld' does the same
thing, but in practice too many people have custom hacks
that we should leave unmolested. Still need to find a way
to deal with 'install -d' and permissions on nonexistent
directories in the middle of the path, but this is at
least no worse that it was before.
PR: bin/22661
- acpiconf Replace include files from old acpi driver to acpica driver.
New sleep type `4b' had been added (S4BIOS) for `-s' option.
Of course this has no effect because driver doesn't
support it for now :-)
- acpidump All needed structs in sys/dev/acpi/*.h had been merged
into local header file. No changes on its usage.
MPPE session keys correctly.
I'm a bit dubious about this code. It seems that the session keys
are initialised differently based on whether you're the client or
the server. One side is the server if it issues the first challenge,
but of course you can issue a challenge from both sides.... at the
same time. Sounds like another wonderful M$ assumption...
Ppp can now talk to itself correctly using encryption.
Problem solved by: Ustimenko Semen <semen@iclub.nsu.ru>
Hair torn out by: me
program to read any file which is a valid crontab file.
The fix is based on that used in NetBSD and OpenBSD - we keep the
file open while the user is editing it. This means that files must
be edited in place. Cron attempts to warn you if your editor does
not do this. The fact that the file must be edited in place is also
noted in the man page.
This patch has been confirmed to work by atleast one person on
-security and has been tested locally.
Obtained from: OpenBSD
a per program basis.
This has now been added in the following way:
* Harness the make header file that's specified with the -h argument:
- Allow the user to define $(OPTS) to specify make arguments that should
be added to every program target.
- Allow the user to define $(prog_OPTS) to specify make arguments that
should just be added to the build of 'prog'.
* Make sure that $(OPTS) and $(prog_OPTS) are defined when looking through
each program's make file to determine which object files to crunch.
* When building the crunchgen makefile add $(OPTS) and $(prog_OPTS)
to the depend and build rules for $(prog_OBJS).
try to move the file from the source to the destination (spool) directory.
If that succeeds, much time and disk-space will be saved by doing that
instead of copying the entire file only to remove the original. This
could be a big win on machines doing samba-service or CAP-based printing.
Note that this is about the fourth or fifth iteration of the patch, after
trying to address all possible security implications of the change.
PR: 16124
Reviewed by: freebsd-current or freebsd-hackers (some time ago)
in lpd. Stat.recv is useful on a printserver, as something of a network
performance-monitoring tool. Stat.send is a minimal accounting record of
sorts for jobs going to tcp/ip based printers.
Reviewed by: freebsd-print@bostonradio.org
it again and again, practically begging the Bad Man to insert his symlink
underneath it and send us down the path to oblivion.
Noticed by: David Lary <dlary@secureworks.net>
* Use a sub-section (Ss) instead of a section (Sh) for
"Sysctl MIB Entries".
* Use a tagged list (Bl, El and It) instead of sub-sections (Ss) for
the actual MIB entries.
* Mark paths up as such (Pa).
* Mark defined values up as such (Dv).
of files auto-installed during an upgrade from a really old system
can get quite long, and it's piped to the PAGER already, print
that first, then print any of the 4 two-line messages that might
apply.
which have long names. Instead of just listing '...', try to list some
reasonable subset of the name (with a "..." to indicate something missing).
Reviewed by: freebsd-print@bostonradio.org (only a little review)
standard or serial. This change needs to be done to the entire system that
depends on this. This way we don't have some code using OnVTY checks
and other doing
strcmp(variable_get(VAR_FIXIT_TTY), "standard") == 0
checks. Also we need to set VAR_FIXIT_TTY to "serial" if we come up on
a serial console.
Also fixed a dialog problem in that dialog was used when dialog was
disabled causing some troubles such as not letting the cursor keys
work when exiting the fixit mode on media (ie. not the fixit shell but
for example fixit on a floppy).
Submitted by: Doug Ambrisko <ambrisko@whistle.com>
PR: 22352
process of making the script more cross platform friendly.
* Add -i option to automatically install files that do not exist
on the system already.
* Add the ability to specify DESTDIR.
* Allow the user to specify scripts to run right before the
comparison starts, and when mm is done. This will
allow the user to specify customized local behavior, and
implement features such as automatically deleting files.
* Document the above changes in the man page.
* Switch to using 'ident' for the CVS Id comparison, which
should help with portability, and makes it faster.
* Reorder, and in one case fix some code by doing things in
ways that make more sense.
* Check to see if the file exists on the system before doing
the comparisons. This saves CPU cycles, and streamlines
the auto-install process.
I used bits and pieces of suggestions and patches from various
people, ultimately too numerous to name. Which is not to say
that they were not both appreciated, and helpful in achieving
the ultimate result.
* More whitespace
* Change read -p to echo -n/read to help support portability
* Genericize an informational message regarding /.cshrc and /.profile
for the same reason
- avoid to use freed (by freeifaddrs) data
- 1st try getifaddrs, then try SIOCGIFMTU as the last resort
Submitted by: JINMEI Tatuya <jinmei@isl.rdc.toshiba.co.jp>
Obtained from: KAME Project
mimics that of tcpdump in that for normal builds, sendmail will only be
built once. For 'make release', it is built once for the bin dist and
once for the crypto dist. This method also removes the need for two separate
Makefiles (which could become out of sync).
Suggested by: bde
Assisted by: kris
a path of the port from which package has been created within FreeBSD Ports
Collection and will be used to improve pkg_version(1) and similar tools.
Reviewed by: ports@FreeBSD.org, jkh
Approved by: jkh
concerning where they're taking place.
Switch from [r]index() to str[r]chr() functions, which are more ISO
compliant.
Prompted by: Edward Welbourne <eddy@vortigen.demon.co.uk>
IRQs from kernel.''..
With IBM ThinkPad600. ``sio1'' was disabled in BIOS
and irq 3 was free (also not listed in dmesg), I think.
But I could not use irq 3 for PC-Card with new(PIOCSRESOURCE
ioctl enabled) pccardd.
user unless they come directly from the kernel. Document this and
add a flag to syslogd which prevents this conversion.
Sort getopt args while I'm at it.
PR: 21788
Submitted by: Andre Albsmeier <andre.albsmeier@mchp.siemens.de>
rename the previous one to indicate that it's not just high, it's
extreme (everything off, secure level raised).
Submitted mostly by: Tony Finch <dot@dotat.at>
Replace all in-tree uses with <sys/mouse.h> which repo-copied a few
moments ago from src/sys/i386/include/mouse.h by peter.
This is also the appropriate fix for exo-tree sources.
Put warnings in <machine/mouse.h> to discourage use.
November 15th 2000 the warnings will be converted to errors.
January 15th 2001 the <machine/mouse.h> files will be removed.
remotely, but they would be if e.g. it happened to call the logging
function using a DNS hostname.
Also replace random() by arc4random() - only one of these is arguably
required since it's directly used in the protocol, but we might as
well replace both to avoid using two different PRNGs.
Reviewed by: green, alex
Replace all in-tree uses with necessary subset of <sys/{fb,kb,cons}io.h>.
This is also the appropriate fix for exo-tree sources.
Put warnings in <machine/console.h> to discourage use.
November 15th 2000 the warnings will be converted to errors.
January 15th 2001 the <machine/console.h> files will be removed.
Approved by: jkh
Write kern_securelevel_enable variable to rc.conf if user selects
medium or low security in sysinstall. This overrides the case where a
user selects fascist security and then tries to go back to a lower
setting.
a default. This should prevent people from whacking return at
the Distributions menu and getting nothing selected as a result
(a minimal "standard" system will at least install).
Flagged as big tech support headache by: Chris Shumway <cshumway@osd.bsdi.com>
The new format is:
filename {changed,missing,extra}
$field expected $foo found $bar
...
Fix various bugs along the way:
Don't complain about directory sizes differing.
Correctly check flags.
support which use National Semiconductor DP8393X (SONIC) as ethernet
controller. Currently, this driver is used on only PC-98.
Submitted by: Motomichi Matsuzaki <mzaki@e-mail.ne.jp>
Obtained from: NetBSD/pc98
OsdSleepUsec(), SleepOp corresponds to OsdSleep() by reading ACPICA
source code.
- Add OsdSleepUsec() which uses DELAY() simply.
- Change unit of acpi_sleep() argument; microseconds to milliseconds.
#include <sys/mbuf.h>. (which #include's <machine/mutex.h> and then
<sys/proc.h> and then <sys/callout.h>, leading to the collision).
<sys/mbuf.h> is really one of those 'no user servicable parts inside'
things.
- If resource which was allocated for pcic was
requested via this ioctl, bus_alloc_resource
would be succeeded and that resource was
returned as free resource. So check whether
requested resource was used for pcic or not
before bus_alloc_resource test.
- merge SYS_RES_IRQ routine into other SYS_RES_*
routine and clean up.
problem reported by: Yohei Terada <terada@jiro.c.u-tokyo.ac.jp>
that it's enabled in acpireg.h only if DIAGNOSTIC option is specified.
ACPICA OSD functions will be compiled in machine/acpi_machdep.c again
tentatively (if DIAGNOSTIC option is specified).
# Should we have acpica_osd.c ?
avoid power on again problem after acpi_soft_off() calling.
- Implement SleepOp/StallOp in AML interpreter. Also provide ACPICA
compatibility.
- Minor changes on __inline function declaration in acpica_osd.h
(obtained from NetBSD porting).
