other allowed domains if the requested domain is below the minimum paging
threshold. Block in fork only if all domains available to the forking
thread are below the severe threshold rather than any.
Submitted by: jeff
Reported by: mjg
Reviewed by: alc, kib, markj
Approved by: re (rgrimes)
Differential Revision: https://reviews.freebsd.org/D16191
Testing m->queue != PQ_NONE is not sufficient; see the commit log
message for r338276. As of r332974 vm_page_dequeue() handles
already-dequeued pages, so just replace vm_page_remque() calls with
vm_page_dequeue() calls.
Reviewed by: kib
Tested by: pho
Approved by: re (marius)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D17025
add support for explicitly requesting that pmap_enter() create a 1 MB page
mapping. (Essentially, this feature allows the machine-independent layer
to create superpage mappings preemptively, and not wait for automatic
promotion to occur.)
Export pmap_ps_enabled() to the machine-independent layer.
Add a flag to pmap_pv_insert_pte1() that specifies whether it should fail
or reclaim a PV entry when one is not available.
Refactor pmap_enter_pte1() into two functions, one by the same name, that
is a general-purpose function for creating pte1 mappings, and another,
pmap_enter_1mpage(), that is used to prefault 1 MB read- and/or execute-
only mappings for execve(2), mmap(2), and shmat(2).
In addition, as an optimization to pmap_enter(..., psind=0), eliminate the
use of pte2_is_managed() from pmap_enter(). Unlike the x86 pmap
implementations, armv6 does not have a managed bit defined within the PTE.
So, pte2_is_managed() is actually a call to PHYS_TO_VM_PAGE(), which is O(n)
in the number of vm_phys_segs[]. All but one call to PHYS_TO_VM_PAGE() in
pmap_enter() can be avoided.
Reviewed by: kib, markj, mmel
Tested by: mmel
MFC after: 6 weeks
Differential Revision: https://reviews.freebsd.org/D16555
See the commit log messages for r321378 and r336288 for descriptions of
this functionality.
Reviewed by: alc
Differential Revision: https://reviews.freebsd.org/D16303
multithreaded programs that was addressed by r329254 was in the
implementation of pmap_enter() on some architectures, notably, amd64.
kib@, markj@ and I have audited all of the pmap_enter() implementations,
and fixed the broken ones, specifically, amd64 (r335784, r335971), i386
(r336092), mips (r336248), and riscv (r336294).
To be clear, the reason to address the problem within pmap_enter() and
revert r329254 is not just a matter of principle. An effect of r329254
was that a copy-on-write fault actually entailed two page faults, not
one, even for single-threaded programs. Now, in the expected case for
either single- or multithreaded programs, we are back to a single page
fault to complete a copy-on-write operation. (In extremely rare
circumstances, a multithreaded program could suffer two page faults.)
Reviewed by: kib, markj
Tested by: truckman
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D16301
add support for explicitly requesting that pmap_enter() create a 2 or 4 MB
page mapping. (Essentially, this feature allows the machine-independent
layer to create superpage mappings preemptively, and not wait for automatic
promotion to occur.)
Export pmap_ps_enabled() to the machine-independent layer.
Add a flag to pmap_pv_insert_pde() that specifies whether it should fail or
reclaim a PV entry when one is not available.
Refactor pmap_enter_pde() into two functions, one by the same name, that is
a general-purpose function for creating PDE PG_PS mappings, and another,
pmap_enter_4mpage(), that is used to prefault 2 or 4 MB read- and/or
execute-only mappings for execve(2), mmap(2), and shmat(2).
Reviewed by: kib
Tested by: pho
Differential Revision: https://reviews.freebsd.org/D16246
that the map entry is wired if the caller passes the flag VM_FAULT_WIRE.
Eliminate the same assertion, but spelled differently, at the end of
vm_fault_hold() and vm_fault_populate(). Repeat the assertion only if the
map is unlocked and the map lookup must be repeated.
Reviewed by: kib
MFC after: 10 days
Differential Revision: https://reviews.freebsd.org/D15582
superpage mappings were already being created by automatic promotion in
vm_fault_populate(), this change reduces the cost of creating those
mappings. Essentially, one pmap_enter(..., psind=1) call takes the place
of 512 pmap_enter(..., psind=0) calls, and that one pmap_enter(...,
psind=1) call eliminates the allocation of a page table page.
Reviewed by: kib
MFC after: 10 days
Differential Revision: https://reviews.freebsd.org/D15572
For the vm_fault_prefault() call from vm_fault_soft_fast(), extend the
scope of the object rlock to avoid re-taking it inside
vm_fault_prefault(). It causes pmap_enter_quick() sometimes called
with shadow object lock as well as the page lock, but this looks
innocent.
Noted and measured by: mjg
Reviewed by: alc, markj (as part of the larger patch)
Tested by: pho (as part of the larger patch)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D15122
should be honored.
We must not sleep or acquire any MI VM locks if TDP_NOFAULTING is
specified. On the other hand, there were some callers in the tree
which set TDP_NOFAULTING for larger scope than needed, I fixed the
code which I wrote, but I suspect that linuxkpi and out of tree drm
drivers might abuse this still.
So only enable the mode for vm_fault_quick_hold_pages() where
vm_fault_hold() is not called when specifically asked by user. I
decided to use vm_prot_t flag to not change KPI. Since number of
flags in vm_prot_t is limited, I reused the same flag which was
already consumed for vm_map_lookup().
Reported and tested by: pho (as part of the larger patch)
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D14825
Such pages are re-enqueued at the end of the fault handler, preserving
LRU. Rather than performing two separate operations per fault, simply
requeue the page at the end of the fault (or bump its activation count
if it resides in PQ_ACTIVE, avoiding the page queue lock entirely).
This elides some page lock and page queue lock operations in common
cases, e.g., CoW faults.
Note that we must still dequeue the source page for "optimized" CoW
faults since the page may not remain enqueued while it is moved to
another object.
Reviewed by: alc, kib
Tested by: pho
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D14625
In many cases the page is not enqueued so the change will have no
effect. However, the change is needed to support an optimization in
the fault handler and in some cases (sendfile, the buffer cache) it
was being emulated by the caller anyway.
Reviewed by: alc
Tested by: pho
MFC after: 2 weeks
X-Differential Revision: https://reviews.freebsd.org/D14625
Make vm_wait() take the vm_object argument which specifies the domain
set to wait for the min condition pass. If there is no object
associated with the wait, use curthread' policy domainset. The
mechanics of the wait in vm_wait() and vm_wait_domain() is supplied by
the new helper vm_wait_doms(), which directly takes the bitmask of the
domains to wait for passing min condition.
Eliminate pagedaemon_wait(). vm_domain_clear() handles the same
operations.
Eliminate VM_WAIT and VM_WAITPFAULT macros, the direct functions calls
are enough.
Eliminate several control state variables from vm_domain, unneeded
after the vm_wait() conversion.
Scetched and reviewed by: jeff
Tested by: pho
Sponsored by: The FreeBSD Foundation, Mellanox Technologies
Differential revision: https://reviews.freebsd.org/D14384
From the submitter description:
The process is forked transitioning a map entry to COW
Thread A writes to a page on the map entry, faults, updates the pmap to
writable at a new phys addr, and starts TLB invalidations...
Thread B acquires a lock, writes to a location on the new phys addr, and
releases the lock
Thread C acquires the lock, reads from the location on the old phys addr...
Thread A ...continues the TLB invalidations which are completed
Thread C ...reads from the location on the new phys addr, and releases
the lock
In this example Thread B and C [lock, use and unlock] properly and
neither own the lock at the same time. Thread A was writing somewhere
else on the page and so never had/needed the lock. Thread C sees a
location that is only ever read|modified under a lock change beneath
it while it is the lock owner.
To fix this, perform the two-stage update of the copied PTE. First,
the PTE is updated with the address of the new physical page with
copied content, but in read-only mode. The pmap locking and the page
busy state during PTE update and TLB invalidation IPIs ensure that any
writer to the page cannot upgrade the PTE to the writable state until
all CPUs updated their TLB to not cache old mapping. Then, after the
busy state of the page is lifted, the faults for write can proceed and
do not violate the consistency of the reads.
The change is done in vm_fault because most architectures do need IPIs
to invalidate remote TLBs. More, I think that hardware guarantees of
atomicity of the remote TLB invalidation are not enough to prevent the
inconsistent reads of non-atomic reads, like multi-word accesses
protected by a lock. So instead of modifying each pmap invalidation
code, I did it there.
Discovered and analyzed by: Elliott.Rabe@dell.com
Reviewed by: markj
PR: 225584 (appeared to have the same cause)
Tested by: Elliott.Rabe@dell.com, emaste, Mike Tancsa <mike@sentex.net>, truckman
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D14347
If the map entry elookup was performed due to the mapping changes, we
need to ensure that there is still some access permission bit
requested which is compatible with the current vm_map_entry mode. If
not, restart the handler from scratch instead of trying to save the
current progress.
Also adjust fault_type to not include cleared permission bits.
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D14347
userspace to control NUMA policy administratively and programmatically.
Implement domainset based iterators in the page layer.
Remove the now legacy numa_* syscalls.
Cleanup some header polution created by having seq.h in proc.h.
Reviewed by: markj, kib
Discussed with: alc
Tested by: pho
Sponsored by: Netflix, Dell/EMC Isilon
Differential Revision: https://reviews.freebsd.org/D13403
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
Initially, only tag files that use BSD 4-Clause "Original" license.
RelNotes: yes
Differential Revision: https://reviews.freebsd.org/D13133
vm_object page indices to on-disk swap space (r322913) has changed the
synchronization requirements for a couple swap pager functions. Whereas
before a read lock on the vm object sufficed because of the global mutex
on the hash table, a write lock on the vm object may now be required. In
particular, calls to vm_pager_page_unswapped() now require a write lock on
the vm_object. Consequently, vm_fault()'s fast path cannot call
vm_pager_page_unswapped(). The swap space will have to be released at a
later point.
Reviewed by: kib, markj
X-MFC with: r322913
Differential Revision: https://reviews.freebsd.org/D12134
Differential Revision discusses the benefits of this change.)
Add a function, vm_reserv_to_superpage(), that returns the superpage
containing the specified base page.
Reviewed by: kib, markj
Tested by: pho
MFC after: 10 days
Differential Revision: https://reviews.freebsd.org/D11556
Guard, requested by the MAP_GUARD mmap(2) flag, prevents the reuse of
the allocated address space, but does not allow instantiation of the
pages in the range. It is useful for more explicit support for usual
two-stage reserve then commit allocators, since it prevents accidental
instantiation of the mapping, e.g. by mprotect(2).
Use guards to reimplement stack grow code. Explicitely track stack
grow area with the guard, including the stack guard page. On stack
grow, trivial shift of the guard map entry and stack map entry limits
makes the stack expansion. Move the code to detect stack grow and
call vm_map_growstack(), from vm_fault() into vm_map_lookup().
As result, it is impossible to get random mapping to occur in the
stack grow area, or to overlap the stack guard page.
Enable stack guard page by default.
Reviewed by: alc, markj
Man page update reviewed by: alc, bjk, emaste, markj, pho
Tested by: pho, Qualys
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D11306 (man pages)
in place. To do per-cpu stats, convert all fields that previously were
maintained in the vmmeters that sit in pcpus to counter(9).
- Since some vmmeter stats may be touched at very early stages of boot,
before we have set up UMA and we can do counter_u64_alloc(), provide an
early counter mechanism:
o Leave one spare uint64_t in struct pcpu, named pc_early_dummy_counter.
o Point counter(9) fields of vmmeter to pcpu[0].pc_early_dummy_counter,
so that at early stages of boot, before counters are allocated we already
point to a counter that can be safely written to.
o For sparc64 that required a whole dummy pcpu[MAXCPU] array.
Further related changes:
- Don't include vmmeter.h into pcpu.h.
- vm.stats.vm.v_swappgsout and vm.stats.vm.v_swappgsin changed to 64-bit,
to match kernel representation.
- struct vmmeter hidden under _KERNEL, and only vmstat(1) is an exclusion.
This is based on benno@'s 4-year old patch:
https://lists.freebsd.org/pipermail/freebsd-arch/2013-July/014471.html
Reviewed by: kib, gallatin, marius, lidl
Differential Revision: https://reviews.freebsd.org/D10156
Simplify the logic for clipping the range returned by the pager to fit
within the map entry.
Use atop() rather than OFF_TO_IDX() on addresses.
Reviewed by: kib
MFC after: 1 week
When re-calculating the last inclusive page index after the pager
call, -1 was erronously ommitted. If the pager extended the run
(unlikely), the result would be insertion of the valid page mapping
outside the current map entry range.
Found by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
In vm_fault_prefault(), if backward count causes underflow in
calculation of
starta = addra - backward * PAGE_SIZE;
then starta must be clipped to entry->start, instead of zero.
Clipping to zero allowed mapping outside of the map entries address
ranges, in particular, map at zero.
Submitted by: Yanko Yankulov <yanko.yankulov@gmail.com>
Reviewed by: alc
MFC after: 1 week
If pager' populate method succeeded, but other thread raced with us
and modified vm_map, we must unbusy all pages busied by the pager,
before we retry the whole fault handling. If pager instantiated more
pages than fit into the current map entry, we must unbusy the pages
which are clipped.
Also do some refactoring, clarify comments and use more clear local
variable names.
Reported and tested by: kargl, subbsd@gmail.com (previous version)
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
with cdev_pg_populate() to provide device drivers access to it. It
gives drivers fine control of the pages ownership and allows drivers
to implement arbitrary prefault policies.
The populate method is called on a page fault and is supposed to
populate the vm object with the page at the fault location and some
amount of pages around it, at pager's discretion. VM provides the
pager with the hints about current range of the object mapping, to
avoid instantiation of immediately unused pages, if pager decides so.
Also, VM passes the fault type and map entry protection to the pager,
allowing it to force the optimal required ownership of the mapped
pages.
Installed pages must contiguously fill the returned region, be fully
valid and exclusively busied. Of course, the pages must be compatible
with the object' type.
After populate() successfully returned, VM fault handler installs as
many instantiated pages into the process page tables as it sees
reasonable, while still obeying the correct semantic for COW and vm
map locking.
The method is opt-in, pager sets OBJ_POPULATE flag to indicate that
the method can be called. If pager' vm objects can be shadowed, pager
must implement the traditional getpages() method in addition to the
populate(). Populate() might fall back to the getpages() on per-call
basis as well, by returning VM_PAGER_BAD error code.
For now for device pagers, the populate() method is only allowed to be
used by the managed device pagers, but the limitation is only made
because there is no unmanaged fault handlers which could use it right
now.
KPI designed together with, and reviewed by: alc
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
not remove user-space visible fields from vm_cnt or all of the references to
cached pages from comments. Those changes will come later.)
Reviewed by: kib, markj
Tested by: pho
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D8497
pages, specificially, dirty pages that have passed once through the inactive
queue. A new, dedicated thread is responsible for both deciding when to
launder pages and actually laundering them. The new policy uses the
relative sizes of the inactive and laundry queues to determine whether to
launder pages at a given point in time. In general, this leads to more
intelligent swapping behavior, since the laundry thread will avoid pageouts
when the marginal benefit of doing so is low. Previously, without a
dedicated queue for dirty pages, the page daemon didn't have the information
to determine whether pageout provides any benefit to the system. Thus, the
previous policy often resulted in small but steadily increasing amounts of
swap usage when the system is under memory pressure, even when the inactive
queue consisted mostly of clean pages. This change addresses that issue,
and also paves the way for some future virtual memory system improvements by
removing the last source of object-cached clean pages, i.e., PG_CACHE pages.
The new laundry thread sleeps while waiting for a request from the page
daemon thread(s). A request is raised by setting the variable
vm_laundry_request and waking the laundry thread. We request launderings
for two reasons: to try and balance the inactive and laundry queue sizes
("background laundering"), and to quickly make up for a shortage of free
pages and clean inactive pages ("shortfall laundering"). When background
laundering is requested, the laundry thread computes the number of page
daemon wakeups that have taken place since the last laundering. If this
number is large enough relative to the ratio of the laundry and (global)
inactive queue sizes, we will launder vm_background_launder_target pages at
vm_background_launder_rate KB/s. Otherwise, the laundry thread goes back
to sleep without doing any work. When scanning the laundry queue during
background laundering, reactivated pages are counted towards the laundry
thread's target.
In contrast, shortfall laundering is requested when an inactive queue scan
fails to meet its target. In this case, the laundry thread attempts to
launder enough pages to meet v_free_target within 0.5s, which is the
inactive queue scan period.
A laundry request can be latched while another is currently being
serviced. In particular, a shortfall request will immediately preempt a
background laundering.
This change also redefines the meaning of vm_cnt.v_reactivated and removes
the functions vm_page_cache() and vm_page_try_to_cache(). The new meaning
of vm_cnt.v_reactivated now better reflects its name. It represents the
number of inactive or laundry pages that are returned to the active queue
on account of a reference.
In collaboration with: markj
Reviewed by: kib
Tested by: pho
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D8302
in-progress count and the vnode. Prior to r188331, we always acquired
the vnode lock before incrementing the object's paging-in-progress count.
Now, we increment it before attempting to acquire the vnode lock with
LK_NOWAIT, but we never sleep acquiring the vnode lock while we have the
count incremented.
Reviewed by: kib
MFC after: 3 days
Convert vm_fault_hold()'s Boolean variables that are only used
internally to "bool". Add a comment describing why the one
remaining "boolean_t" was not converted.
Reviewed by: kib
MFC after: 8 days
pager error, leave the page to the wire owner. E.g. the page might be
a part of the invalidated buffer.
Reported and tested by: pho
Reviewed by: alc, markj
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D8197
optimizations into two distinct pieces. The first piece consists of the
code that should only be performed once per page fault and requires the map
to be locked. The second piece consists of the code that should be
performed each time a pager is called on an object in the shadow chain.
(This second piece expects the map to be unlocked.)
Previously, the entire implementation could be executed multiple times.
Moreover, the second and subsequent executions would occur with the map
unlocked. Usually, the ensuing unsynchronized accesses to the map were
harmless because the map was not changing. Nonetheless, it was possible for
a use-after-free error to occur, where vm_fault() wrote to a freed map
entry. This change corrects that problem.
Reported by: avg
Reviewed by: kib
MFC after: 3 days
Sponsored by: EMC / Isilon Storage Division
