This is an extended version of ipv4_addr_IF which supports both IPv4 and
IPv6, and multiple range specifications. To avoid to generate too many
addresses, the maximum number of the generated addresses is currently
limited to 31.
- Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable.
- ipv6_prefix_IF now supports !/64 prefix length. In addition to the old
64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64
is supported.
- Replace ifconfig command with $IFCONFIG_CMD variable to support
a dry-run mode in the future.
- Remove IP aliases before removing all of IPv4 addresses when doing
"rc.d/netif down".
- Add a DAD wait to network6_getladdr() because it is possible to fail to
configure an EUI64 address when ipv6_prefix_IF is specified.
A summary of the supported ifconfig_* variables is as follows:
# IPv4 configuration.
ifconfig_em0="inet 192.168.0.1"
# IPv6 configuration.
ifconfig_em0_ipv6="inet6 2001:db8::1/64"
# IPv4 address range spec. Now deprecated.
ipv4_addr_em0="10.2.1.1-10"
# IPv6 alias.
ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70"
# IPv4 alias.
ifconfig_em0_alias1="inet 10.2.2.1/24"
# IPv4 alias with range spec w/o AF keyword (backward compat).
ifconfig_em0_alias2="10.3.1.1-10/32"
# IPv6 alias with range spec.
ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64"
# ifconfig_IF_aliases is just like ifconfig_IF_aliasN.
ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24"
# IPv6 alias (backward compat)
ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64"
# IPv6 alias w/o AF keyword (backward compat)
ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64"
# IPv6 prefix.
ipv6_prefix_em0="2001:db8::/64"
Tested by: Kimmo Paasiala
optionally start the traversal from a previously found element by passing the
element in as "var". Passing a NULL "var" retains the same semantics as the
regular FOREACH macros.
Kudos to phk for suggesting the "FROM" suffix instead of my original proposal.
Reviewed by: jhb (previous version), rpaulo
MFC after: 1 week
This is actually a fully functional build except:
* All internal shared libraries are static linked to make sure there
is no interference with ports (and to reduce build time).
* It does not have the python/perl/etc plugin or API support.
* By default, it installs as "svnlite" rather than "svn".
* If WITH_SVN added in make.conf, you get "svn".
* If WITHOUT_SVNLITE is in make.conf, this is completely disabled.
To be absolutely clear, this is not intended for any use other than
checking out freebsd source and committing, like we once did with cvs.
It should be usable for small scale local repositories that don't
need the python/perl plugin architecture.
But we don't want to set it to + for bmake since it breaks make -N
which is used to supress the normal handling of targets marked with .MAKE
(which seems broken in fmake and might be why _+_ was introduced).
Add some comments to explain what's gong on.
Reviewed by: obrien
- remove return statements from void function [1]
- include missing header
- use O_CLOEXEC instead of separate fcntl() calls
PR: docs/179459 [1]
MFC after: 1 week
This adds some new NetBSD releases and makes some simple formatting changes.
With this commit NetBSD and FreeBSD should have identical files.
DragonflyFBSD has the version immediately prior to this commit.
When committing to this file please try to coordinate with all three groups.
Submitted by: Alan Barrett <apb@cequrux.com>
{,ipv6_}static_routes and rc.d/routing. For example:
static_routes="foo bar:em0"
route_foo="-net 10.0.0.0/24 -gateway 192.168.2.1"
route_bar="-net 192.168.1.0/24 -gateway 192.168.0.2"
At boot time, all of the static routes are installed as before.
The differences are:
- "/etc/rc.d/netif start/stop <if>" now configures static routes
with :<if> if any.
- "/etc/rc.d/routing start/stop <af> <if>" works as well. <af> cannot be
omitted when <if> is specified, but a keyword "any" or "all" can be used
for <af> and <if>.
Realtek RTL8188CU/RTL8192CU USB IEEE 802.11b/g/n wireless cards.
This driver requires microcode which is available in FreeBSD ports:
net/urtwn-firmware-kmod.
Hiren ported the urtwn(4) man page from OpenBSD and Glen just commited a port
for the firmware.
TODO:
- 802.11n support
- Stability fixes - the driver can sustain lots of traffic but has trouble
coping with simultaneous iperf sessions.
- fix debugging
MFC after: 2 months
Tested by: kevlo, hiren, gjb
debug files for userland programs and libraries. The "-g" debug flag
is automatically applied when WITH_DEBUG_FILES is set.
The debug files are now named ${prog}.debug and ${shlib}.debug for
consistency with other systems and documentation. In addition they are
installed under /usr/lib/debug, to simplify the process of installing
them if needed after a crash. Users of bsd.{prog,lib}.mk outside of the
base system place the standalone debug files in a .debug subdirectory.
GDB automatically searches both of these directories for standalone
debug files.
Thanks to everyone who contributed changes, review, and testing during
development.
The build system is really intricate and I had a hard time to remind the
whole picture even when reading my own words. This one will hopefully
be better.
QLogic 8300 Series Adapters
Submitted by: David C Somayajulu (davidcs@freebsd.org) QLogic Corporation
Approved by: George Neville-Neil (gnn@freebsd.org)
specified by passing the XCC, XCXX, and XCPP variables (corresponding to
CC, CXX, and CPP) to buildworld/buildkernel. The compiler must be clang
or be configured to target the appropriate architecture.
To speed build times, if XCC is an absolute path or
WITHOUT_CROSS_COMPILER is defined then no cross compiler will be built
during the cross-tools stage.
Limited documentation of this feature can currently be found at:
https://wiki.freebsd.org/ExternalToolchain
This functionality should be considered experimental and is subject to
change without notice.
Sponsored by: DARPA, AFRL
Discussed with: imp, sjg
