Add a title "DOS" to the X window.
Submitted by: Parag Patel <parag@cgt.com>
PR: bin/8486
Note: The pr was closed a long time ago when the original patch was
applied, rather than the amended one.
It appears that make fails to read the global symbol table of the archive file,
making it think that the library needs to be rebuilt.
fix supplied in PR:
PR: bin/14167
Submitted by: Sebastian Lederer <lederer@bonn-online.com>
Reviewed by: gallatin@FreeBSD.ORG
doscmd heavily depends on struct sigcontext which luckily is mostly passed
between functions as usion regcontext_t. By redefining union regcontext_t in
terms of mcontext_t almost all bases are covered.
It also seems to me that doscmd was in a transitional state. The redundant
definitions made it difficult to get a clear overview and could easily cause
oversight. To make sure my changes were ok, I went as far as to complete the
transition. It was not exactly necessary, but I expect to have to come back
here some more ("whistle" if I'm wrong :-).
-----------------------------
Most of the userland changes are in libc. For both the alpha
and the i386 setjmp has been changed to accomodate for the
new sigset_t. Internally, libc is mostly rewritten to use the
new syscalls. The exception is in compat-43/sigcompat.c
The POSIX thread library has also been rewritten to use the
new sigset_t. Except, that it currently only handles NSIG
signals instead of the maximum _SIG_MAXSIG. This should not
be a problem because current applications don't use any
signals higher than NSIG.
There are version bumps for the following libraries:
libdialog
libreadline
libc
libc_r
libedit
libftpio
libss
These libraries either a) have one of the modified structures
visible in the interface, or b) use sigset_t internally and
may cause breakage if new binaries are used against libraries
that don't have the sigset_t change. This not an immediate
issue, but will be as soon as applications start using the
new range to its fullest.
NOTE: libncurses already had an version bump and has not been
given one now.
NOTE: doscmd is a real casualty and has been disconnected for
the moment. Reconnection will eventually happen after
doscmd has been fixed. I'm aware that being the last one
to touch it, I'm automaticly promoted to being maintainer.
According to good taste this means that I will receive a
badge which either will be glued or mechanically stapled,
drilled or otherwise violently forced onto me :-)
NOTE: pcvt/vttest cannot be compiled with -traditional. The
change cause sys/types to be included along the way which
contains the const and volatile modifiers. I don't consider
this a solution, but more a workaround.
commit and those which cause ugly nroff output have been fixed, since
the purpose of the style guideline which they contravene is to reduce
the sizes of deltas.
Reported by: bde
of VPATH to be a little sexier. I'd say it looks a bit like Claudia
Schiffer now, which I consider a definate improvement. We're also a little
more subtle about saying that VPATH is for backward(s) compatibility.
Submitted-by: chris, bde, and myself
[although none of their descriptions were as sexy
M(|is|r)s Schiffer, of course].
for BSD less than 4.4 where sys/cdefs.h DNE but can be simulated with
param.h. Unfortunately, the additional include did little to actually
improve portability since we've lost portability in several other chunks
of make code (err(), sysctlbyname(), probable more).
Partly submitted by: bde
"Make no longer properly parses archive files, so using archive members
as make targets, as described in PSD:12 section 4.2, does not work."
Really should be merged into 3.3 before we ship if we can..
it's a trivial fix.
PR: bin/13039, bin/10274
Submitted by: Mikko Tyolajarvi mikko@dynas.se
* Consistently misspell built-in as builtin.
* Add a builtin(1) manpage and create builtin(1) MLINKS for all shell
builtin commands for which no standalone utility exists. These MLINKS
replace those that were created for csh(1).
* Add appropriate xrefs for builtin(1) to the csh(1) and sh(1) manpages,
as well as to the manpages of standalone utilities which are supported
as shell builtin commands in at least one of the shells. In such
manpages, explain that similar functionality may be provided as a
shell builtin command.
* Improve sh(1)'s description of the cd builtin command. Csh(1) already
describes it adequately. Replace the cd(1) manpage with a builtin(1)
MLINKS link.
* Clean up some mdoc problems: use Xr instead of literal "foo(n)"; use
Ic instead of Xr for shell builtin commands.
* Undo English contractions.
Reviewed by: mpp, rgrimes
of user keys (documentation pending). The only key whose semantics have
changed is the capital 'N' key, which now performs a repeat-search in the
opposite direction (just like in vi).
This commit is a little bulkier than what I had originally planned. I'm not
completely happy with the direction it went, but it's definately an
improvement, and the alternative is to continue becoming irrelevant compared
to GNU less. (Does anyone even _use_ /usr/bin/more these days?)
Judge: TN3270, you are charged with being superfluous to
requirement, and have been found guilty.
Defence, do you have any final words?
Defence lawyer: Yes,..
*!BLAM!*
Judge: Contempt of court!! That blood is disgusting! Sergeant?
Sergeant: Sah!?
Judge: Get that mess out of here.
Sergeant: Sah!!
Judge: Anyone else have anything else to say?
...
Judge: Executioner!
Executioner: My lord?
Judge: Carry out the sentence, forthwith!
Executioner: As my lord wishes...
*!BLAM!* *!BLAM!* *!BLAM!*
Judge: Any more matters for the court today?
...
`opaque', fix reversed description of `nodump', and don't use
`nodump' as an example of adding a `no' prefix since the double
negative would be confusing (it's still confusing -- the implicitly
documented `nonodump' flag doesn't exist).)
recommended option in the manpage, but the - option remains for
backward compatibility and is documented as such.
PR: 13363
Reported by: James Howard <howardjp@wam.umd.edu>
Reviewed by: bde
(emulate the 'd' linker (?)). This was most harmful for the NOSHARED=yes
case since libskey.o isn't linked to libmd.a.
Fixed the usual disorder of DPADD and LDADD, and some tab lossage.
- Sort xrefs
- Be consistent with section names as outlines in mdoc(7).
- Other misc mdoc cleanup.
PR: doc/13144
Submitted by: Alexey M. Zelkin <phantom@cris.net>
u_quad_int instead of u_long for counters. (NetBSD's rev 1.15 - 1.18)
Deprecate register. (NetBSD's rev 1.13)
The diffs from NetBSD were not applied verbatim, because we don't care
about NO_QUAD right now.
PR: 12959
Reported by: Nicholas Barnes <nb@ravenbrook.com>
Obtained from: NetBSD
February.
If you do a web search for "lionheart crowned" you'll get lots of
conflicting information. Some sites say 3rd September, while others
say 27th February. Most of the "27th February" crowd seem to take their
information from other incarnations of this file on other operating
systems.
After a very pleasant afternoon spent lunching with my girlfriend's
parents, I availed myself of their extensive reference library.
You'd be surprised how hard it is to get concrete information about this.
The _Encyclopedia Brittanica_ doesn't mention the date, only the year, as
does _Brewer's Dictionary of Phrase and Fable_, as do all the other printed
sources I tried. One of them even said July 7th 1189! Microsoft's (yeah,
so sue me) Encarta '95 has quite a comprehensive entry, but again, no
day and month information
In desperation, I tried the web once more, and finally stumbled upon
http://www.btinternet.com/~timeref/hsttime2.htm. This revealed that
Henry II died on 6th July 1189 (presumably the source of the 7th July
entry in another reference), and that Richard was crowned on 3rd
September.
Best of all, this site gives references. So if any of you have a copy of
_The Life and Times of Richard I_, John Gillingham, pub. George Weidenfeld
and Nicholson Limited, 1974, then you can confirm this for yourselves.
For completenesses sake, I tried to find an ISBN number for the above
book. But Amazon and Barnes and Noble don't appear to stock it (although
it looks like a revised version, by the same author, is due out in October
1999, in case anyone's interested).
PR: docs/10488
Submitted by: solon@macaulay.demon.co.uk
that -E only operates for a specified variable. Useful since the -e option
will often pull-in many unwanted variable overrides (esp. in a make world
situation). Uses include overriding BINOWN (which cannot be done by normal
methods or through abuses of MAKEFLAGS) or likely for ports to honour CFLAGS
(provided they're running on a system whose make(1) has this option).
I originally coded this myself, and now I realize {Net,Open}BSD had already
coded this. I have tossed my version to reduce diffs between the projects.
Obtained from: OpenBSD 2.5
match with all of them, rather than only supporting a single user.
PR: 11121
Kinda submitted by: James Howard <howardjp@byzantine.student.umd.edu>
Reviewed by: DES
Remove some whitespace
Fix a problem where any event on the Last whatever of the month
was duplicated after the last day of the month (e.g. 32oct.)
PR: 4907
Submitted by: Mikhail Teterin mi@aldan.algebra.com
it also fixes that fact that this file badly needed to be regenerated due
to changes in yacc.
Not done by: pst (in misc/1380)
Almost done by: danny (in ftp.y)
aren't allowed and the right casts can be used for printf() statements.
Document the conversion specifier limitations and the fact that
arithmetic overflow causes a fatal error.
PR: 12611
Reported by: Frode Vatvedt Fjeld <frodef@acm.org>
Reviewed by: bde
the expected size of the magic(5) database agree with the
real world. Also, improve the behavior of the realloc
mechanism when the magic database does exceed expectations.
Reviewed by: Peter Jeremy, Matt Dillon
Obtained from: Peter Edwards <peter.edwards@isocor.ie>
procfs map file when object IDs were eliminated in the mega-commit
that included procfs_map.c revision 1.19.
The map file is a terrible hodge-podge. The fields that are used
mainly for kernel debugging should be moved out of it into a
separate file, so that the interface presented by the map file to
applications can remain stable in the face of VM system changes.
track.
The $Id$ line is normally at the bottom of the main comment block in the
man page, separated from the rest of the manpage by an empty comment,
like so;
.\" $Id$
.\"
If the immediately preceding comment is a @(#) format ID marker than the
the $Id$ will line up underneath it with no intervening blank lines.
Otherwise, an additional blank line is inserted.
Approved by: bde
doscmd that was affected by the SA_SIGINFO changes (which made many
lines longer).
This application is in need for general code reformatting and warning
fixes.
Submitted by: Warner Losh <imp@village.org>
support. I've been building world with these changes for months w/o
ill effect. I've also managed to build the cross tool chain for MIPS
with these patches.
Please note that the extent to which these patches work is largely
dictated by how well our tool chains support the cross compilation.
Building alpha binaries on i386 doesn't work. Supposedly building
i386 binaries on alpha does work, but I've not verified it with these
patches, however.
EGCS assign weak symbols to inline functions it couldn't inline (e.g. virtual
inline functions), template functions, etc. Omitting them result in quite bogus
profile.
Weak symbols created by __weak_reference are not really problem.
Caught by: Ilya Segalovich <iseg@comptek.ru>
set to `YES' for passive mode to be used by default.
Just setting FTP_PASSIVE_MODE is not sufficient, as
it was before.
Noted by: eivind
Reviewed by: des
(2) Die when there is a problem opening at.allow other then it not existing.
An error other then it not existing might be a trick to somehow
circumvent system security.
Mostly Reviewed By: msmith
intentional, this behaviour is far too obnoxious given the number of
filenames such as rpc.statd we have.
Submitted by: Chris Costello [3]chris@calldei.com (bin/11303)
PR: bin/12070
Submitted by: Dominic Mitchell <Dom.Mitchell@palmerharvey.co.uk>
Specifically check that FTP_PASSIVE_MODE is set to YES, rather than
just checking if it is defined.
Discussed on: freebsd-current
two characters of $EDITOR. This allows things like "vim" and "vi -G"
(although nvi would fail...oh well).
- Avoid certain cases where the editor is passed an invalid line number.
the new -i option were missing.
Fixed style bugs in previous commit:
(1) initialisation of a local variable in its declaration.
(2) inconsistency of (1) with style of nearby code.
(3) disorder of declaration for (1).
(4) a line longer than 80 characters.
(5) bitrot in the printf() -> err() cleanups to help bloat the line in (4).
local "login" name for rcmd(3). This is particularly useful for things
like portslave and other packages with terminal server functionality
where a login can either run ppp locally or get shunted off to another
box via rlogin depending on radius authentication etc. Quite often the
local box doesn't even have accounts, so a flag such as this is needed.
Obviously this is restricted to callers with uid == 0.
and was also a bit inconsistent: leading blanks, or any double blanks
generated empty arguments, but a trailing blank did not.
PR: bin/2630, bin/10914
Submitted by: Arne Henrik Juul <arnej@imf.unit.no>
