Now that BCM283x source are buildable with SMP option it cam be moved to
GENERIC SMP config. SMP itself does not work on RPi3 yet due to lack of
PSCI monitor which is work in progress at the moment
FDT attachment to a new file. A separate ACPI attachment will then be added
to allow arm64 servers with ACPI to use it over FDT.
This should also help with merging this with the ofwpci driver, with
further work needed to remove restrictions this driver places on resource
allocation.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D7319
them. Previously this would walk past the end of the array and print
whatever happened to be after the trapframe struct.
MFC after: 1 week
Sponsored by: DARPA, AFRL
these show a 9-10% reduction in user and system time for a buildworld -j48.
Obtained from: ABT Systems Ltd
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
VFP code to store the old context, with lazy loading of the new context
when needed.
FPU_KERN_NOCTX is missing as this is unused in the crypto code this has
been tested with, and I am unsure on the requirements of the UEFI
Runtime Services.
Reviewed by: kib
Obtained from: ABT Systeems Ltd
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8276
Policy for FreeBSD/arm64 kernel config is the same one as for x86
architectures: provide GENERIC kernel bootable on as many systems
as possible. Since there is no SMP support for RPi 3 yet new kernel
config was introduced: GENERIC-UP, which is effectively GENERIC with
SMP option disabled
not be sent to userspace, for example the future flag to tell when we are
using floating point in the kernel.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
- Rename SOC_BCM2837 to SOC_BRCM_BCM2837, put it to opt_soc.h
- do not use files.XXX files, just move required sources to
conf/files.arm64 and make them depend on soc_brcm_bcm2837
Suggested by: andrew
Using the device pager with /dev/kmem is not stable since KVA mappings
are transient, but the device pager caches the PA associated with a
given offset forever. Interestingly, mips' implementation of
memmap() already refused requests for /dev/kmem.
Note that kvm_read/kvm_write do not use mmap, but use read and write on
/dev/kmem, so this should not affect libkvm users.
Reviewed by: kib
MFC after: 2 months
RPI3 kernel config builds kernel compatible with latest upstream device
tree and firmware: https://github.com/raspberrypi/firmware/tree/master/boot
As of today it's 597c662a613df1144a6bc43e5f4505d83bd748ca
Default console is PL01x, so pi3-disable-bt dt overlay should be configured
in config.txt and stock U-Boot should be patched to use proper serial port.
Yet unsupported: SMP, VCHIQ, RNG driver. RNG requires some work due to
upstream device tree incompatibility.
Multiple people contributed to this work over time: db@, loos@, manu@
with no creative content. Include "lost" changes from git:
o Use /dev/efi instead of /dev/efidev
o Remove redundant NULL checks.
Submitted by: kib@, dim@, zbb@, emaste@
Keep resource state consistent with INTRNG state - if intr_activate_irq
fails - deactivate resource and propagate error to calling function
Reviewed by: mmel
to add actions that run when a TCP frame is sent or received on a TCP
session in the ESTABLISHED state. In the base tree, this functionality is
only used for the h_ertt module, which is used by the cc_cdg, cc_chd, cc_hd,
and cc_vegas congestion control modules.
Presently, we incur overhead to check for hooks each time a TCP frame is
sent or received on an ESTABLISHED TCP session.
This change adds a new compile-time option (TCP_HHOOK) to determine whether
to include the hhook(9) framework for TCP. To retain backwards
compatibility, I added the TCP_HHOOK option to every configuration file that
already defined "options INET". (Therefore, this patch introduces no
functional change. In order to see a functional difference, you need to
compile a custom kernel without the TCP_HHOOK option.) This change will
allow users to easily exclude this functionality from their kernel, should
they wish to do so.
Note that any users who use a custom kernel configuration and use one of the
congestion control modules listed above will need to add the TCP_HHOOK
option to their kernel configuration.
Reviewed by: rrs, lstewart, hiren (previous version), sjg (makefiles only)
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D8185
PIC_SETUP_INTR implementation in GICv3 did not allow
for setting up interrupts without included FDT
description. GICv2m-like MSI interrupts, which map
MSI messages to SPI interrupt lines, may not have
a description in FDT. Add support for such interrupts
by setting the trigger and polarity to the appropriate
values for MSI (edge, high) and get the hardware
IRQ number from the corresponding ISRC.
Obtained from: Semihalf
Submitted by: Michal Stanek <mst@semihalf.com>
Sponsored by: Annapurna Labs
Reviewed by: wma
Differential Revision: https://reviews.freebsd.org/D7662
As this is evaluation hardware with only a few users, and there is a lack
of information add a warning when booting on this hardware.
Reported by: cognet
Obtained from: ABT Systems Ltd
MFC after: Instant
Sponsored by: The FreeBSD Foundation
Move PMAP_TS_REFERENCED_MAX out of the various pmap implementations and
into vm/pmap.h, and describe what its purpose is. Eliminate the archaic
"XXX" comment about its value. I don't believe that its exact value, e.g.,
5 versus 6, matters.
Update the arm64 and riscv pmap implementations of pmap_ts_referenced()
to opportunistically update the page's dirty field.
On amd64, use the PDE value already cached in a local variable rather than
dereferencing a pointer again and again.
Reviewed by: kib, markj
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D7836
the data cache to the point of unification. This is the point where the
two caches are unified to a single unified cache so cleaning past here
is just extra unneeded work.
This was noticed when investigating r305545.
Reported by: bz
Obtained from: ABT Systems Ltd
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
page is non-executable the contents of the i-cache are unimportant so this
call is just adding unneeded overhead when inserting pages.
While doing research using gem5 with an O3 pipeline and 1k/32k/1M iTLB/L1
iCache/L2 Bjoern Zeeb (bz@) observed a fairly high rate of calls into
arm64_icache_sync_range() from pmap_enter() along with a high number of
instruction fetches and iTLB/iCache hits.
Limiting the calls to arm64_icache_sync_range() to only executable pages,
we observe the iTLB and iCache Hit going down by about 43%. These numbers
are quite misleading when looked at alone as at the same time instructions
retired were reduced by 19.2% and instruction fetches were reduced by 38.8%.
Overall this reduced the runtime of the test program by 22.4%.
On Juno hardware, in steady-state, running the same test, using the cycle
count to determine runtime, we do see a reduction of up to 28.9% in runtime.
While these numbers certainly depend on the program executed, we expect an
overall performance improvement.
Reported by: bz
Obtained from: ABT Systems Ltd
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
This commit adds drivers for Alpine Cache Coherency Unit
and North Bridge Service whose task is to configure
the system fabric and enable cache coherency.
Obtained from: Semihalf
Submitted by: Michal Stanek <mst@semihalf.com>
Sponsored by: Annapurna Labs
Reviewed by: wma
Differential Revision: https://reviews.freebsd.org/D7565
survived multiple world and kernel builds, and of poudriere building full
package sets.
I have observed a 3% reduction in buildworld times with superpages enabled,
however further testing is needed to see if this is observed in other
workloads.
Obtained from: ABT Systems Ltd
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
