Add basic support for A33/R16 that is enough to boot a kernel.
This adds the platform code, padconf data and the new clocks strings.
MFC after: 2 weeks
dangerous. Those wanting data from an mbuf should use DTrace itself to get
the data.
PR: 203409
Reviewed by: hiren
MFC after: 1 week
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D9035
* CID 1198994: Don't run the speed disk on a disk with no sectors
* CID 1011442: Don't call close(2) if open(2) fails
* CID 1011161: Use snprintf instead of sprintf
* CID 1009825: Check the return value of lseek
Reported by: Coverity
CID: 1198994 1011442 1011161 1009825
MFC after: 4 weeks
Sponsored by: Spectra Logic Corp
Although it increases the size of the bsnmp{get,set,walk} binaries by
four on my [amd64] system, it removes the need for producing .debug
files, profiled libraries, and for installing the library itself,
reducing the overall size use on disk by the utilities noted
previously.
Plus, it guards against ABI/API compatibility issues with the library
as it's only used internal to the tools themselves.
MFC after: 3 weeks
all public firmwares for all chips since the last release (1.15.37.0)
follows (it's a straight copy-paste from the Release Notes for the
12/30/2016 Unified Wire release on Chelsio's website).
T6 Firmware
++++++++++++
Version : 1.16.26.0
Date : 12/28/2016
Fixes
-----
BASE:
- Max number of egress and control queues adjusted to accomodate
co-processor mode queues.
- Fixed intermittent DDR3/4 ECC errors.
- Fixed a traffic stall when ETS BW is configured as 0%.
- Max number of ethctrl queue in VF set to 1.
ETH:
- Added a new config file option 'speed' under port section to set the
port speed. Use only when auto negotiation is off.
- FEC option removed from firmware config file. cxgbtool can be used to
change the fec setting.
- CPL_TX_TNL_LSO cpl handling added in ETH_TX_PKT_VM handler. This fixes
large tunnel tcp packet support for VxLAN.
Version : 1.16.22.0
Date : 12/05/2016
Fixes
-----
BASE:
- fw_port_type updated in fw API to match kernel.org definitions.
- Saved power by disaling unused MAC lanes.
- Configures correct power bin.
- Enhanced DDR4 performance.
- Enabled interrupts.
- Fixed an issue where filter rule for 'unicast hash' is not working.
ETH:
- Disabled auto negotiation by default because most of 100G switches do
not support AN as of today.
- Fixed flow control not getting disabled problem.
- Fixed an issue where port0 doesn't come up sometimes.
- Fixed 10G link not coming up issue.
- Fixed an issue with promiscuous mode when dcbx disabled.
OFLD:
- Fixed a connection stuck issue when abort is received during out of tx
pages backpressure.
ENHANCEMENTS
------------
BASE:
- Added inline TLS mode support.
Version : 1.16.12.0
Date : 11/11/2016
ENHANCEMENTS
------------
BASE:
- Added T6 support.
- Added T6 1G/10G/25G/40G/100G link speeds.
- Added T6 co-processor mode crypto support.
- Added facility to increase link AN+AEC timeout.
OFLD:
- Added support for all T5 offload protocols except FCoE.
iSCSI:
- iscsi completion moderation enabled.
=======================================================================
T5 Firmware
++++++++++++
Version : 1.16.26.0
Date : 12/28/2016
FIXES
-----
BASE:
- Max number of ethctrl queue in VF set to 1.
Version : 1.16.22.0
Date : 12/05/2016
FIXES
-----
BASE:
- Fixed an issue where filter rule for 'unicast hash' is not working.
ETH:
- Fixed an issue with promiscuous mode when dcbx disabled.
ENHANCEMENTS
------------
ETH:
- Added 40G-KR support.
Version : 1.16.12.0
Date : 11/11/2016
FIXES
-----
BASE:
- Fixed multiple issues related with VFs FLR processing.
- Fixed channel assignment based on number of ports in adapter.
- Fixed a crash when VM having PF assigned as passthrough mode is
rebooted.
- Handled 2nd HELLO command from the same PF without seeing BYE from the
same PF and if that is the only PF.
- A warning is printed in firmware log if PCI-E cookie generation is
enabled in serial initialization file.
- Fixed multiple issues related with Filtering.
- Enabled DSGL memory write for iscsi and rdma.
- Added new FW_PARAMS_CMD[DEV] options to retrieve Serial Configuration
and VPD version numbers.
- Fixed an issue where LVDS output was not getting enabled using vpd.
DCBX:
- Fixed DCBX CEE Incorrect class to pririty mapping.
- Fixed incorrect interpretation of DCBX IEEE PFC.
ETH:
- Adjusted the link related delay timings according to the QSFP spec.
- Improved 40G link bringup time with few switches.
OFLD:
- Do not reserve qp/cq if rdma capability is not enabled.
- Fixed an issue where approx 1600+ TOE connections were causing a
firmware fatal error.
FOiSCSI:
- Fixed an issue where unloading foiscsi driver causes mailbox timeout.
ENHANCEMENTS
------------
BASE:
- Added 10G KR/KX support.
- Added T540-BT adapter support.
- Added 4 new rss key modes for PFs and VFs.
OFLD:
- Added new WR FW_RI_FR_NSMR_TPTE_WR to improve fast MR write
performance in RDMA.
Version : 1.16.5.0
Date : 10/26/2016
FIXES
-----
BASE:
- Fixed multiple issues where FLR from multiple VFs can cause firmware
crash.
- Fixed channel assignment based on number of ports in adapter.
- Fixed the HELLO command master force api to handle the 2nd HELLO
correctly without getting BYE from the PF driver.
- Added facility to retrieve Serial configuration and VPD version. Two
new FW_PARAMS_CMD[DEV] options added to retrieve these values.
- Fixed multiple issues where FLR from multiple VFs are not completing.
- Added new RSS hash secret key modes.
- Fixed an issue where LVDS output was not getting enabled using vpd.
DCBX:
- Fixed an issue where iscsi tlv is sent incorrectly to host (DCBX CEE).
- Fixed an issue where app priority values are not handled correctly
in fw (DCBX IEEE).
ETH:
- Adjusts the link related delay timings according to the QSFP spec.
- Changed 2.5G mac speed bit to 25G mac speed bit in fw API.
- Improvement in 40G link bringup time with few switches.
OFLD:
- Do not reserve qp/cq if rdma capability is not enabled.
- Fixed an issue where approx 1600+ TOE connections were causing a
firmware fatal error.
- Fixed DSGL memory write in T5. Now iwarp and iscsi can use DSGL to do
memory write.
- Fixed multiple issues in hash filter mode where incorrect protocol
mask was getting used and affecting hash filter functionality.
- New fastpath WR FW_RI_FR_NSMR_TPTE_WR (with fully populated TPTE) is
added for small REG_MR operations.
FOiSCSI:
- Fixed an issue in foiscsi recovery path.
- Fixed an issue where foiscsi (in VM in PCIE passthrough mode) didn't
come up after VM FLR.
ENHANCEMENTS
------------
ETH:
- Implemented 1G/10G KR/KX ability.
- Implemented T540-BT adapter support.
=======================================================================
T4 Firmware
+++++++++++
Version : 1.16.12.0
Date : 11/11/2016
FIXES
-----
BASE:
- Fixed an issue where reading temperature sesors using ldst command
causes mailbox timeout.
- Added new FW_PARAMS_CMD[DEV] options to retrieve Serial Configuration
and VPD version numbers.
ETH:
- Fixed DCBX CEE Incorrect class to pririty mapping.
FOiSCSI:
- Fixed an issue where unloading foiscsi driver causes mailbox timeout.
MFC after: 3 days
Sponsored by: Chelsio Communications
Instead of spuriously re-reading the lock value, read it once.
This change also has a side effect of fixing a performance bug:
on failed _mtx_obtain_lock, it was possible that re-read would find
the lock is unowned, but in this case the primitive would make a trip
through turnstile code.
This is diff reduction to a variant which uses atomic_fcmpset.
Discussed with: jhb (previous version)
Tested by: pho (previous version)
It was a temporary change to ease an import of native atomic_cas primitives.
Instead, atomic_fcmpset was devised with different semantics. See r311168.
These primitives give the caller the read value if the exchange attempt
failed which saves an explicit reload for cmpset loops.
The man page was partially submitted by kib.
Reviewed by: kib (previous version), jhb (previous version)
The micro-Firewall DTS is now a single BSD licensed file.
Reported by: manu
Obtained from: pfSense
MFC after: 2 weeks
Sponsored by: Rubicon Communications, LLC (Netgate)
Original log:
Do not initialize the adapter on MTU change when adapter status is down.
This fixes long-standing problems when changing settings of the adapter.
Discussed in:
https://lists.freebsd.org/pipermail/freebsd-net/2016-June/045509.html
Reported by: Franco Fichtner <franco@opnsense.org>
MFH: 2 days
As a followup to r310638, update libsysdecode (and kdump) to decode the
'mode' argument to getfsstat(). sysdecode_getfsstat_flags() has been
renamed to sysdecode_getfsstat_mode() and now treats the argument as an
enumerated value rather than a mask of flags.
On systems without a configured swap device, an attempt to launder pages
from a swap object will always fail and result in the page being
reactivated. This means that the page daemon will continuously scan pages
that can never be evicted. With this change, anonymous pages are instead
moved to PQ_UNSWAPPABLE after a failed laundering attempt when no swap
devices are configured. PQ_UNSWAPPABLE is not scanned unless a swap device
is configured, so unreferenced unswappable pages are excluded from the page
daemon's workload.
Reviewed by: alc
MK_KERBEROS_SUPPORT != no
This fixes the odd case where someone specified MK_GSSAPI=no and
MK_KERBEROS_SUPPORT=yes (which admittedly, probably doesn't make sense,
but the build system doesn't prevent this case today, and it didn't when
I filed the bug back in 2011 either).
MFC after: 2 weeks
PR: 159745
Without this change, indent(1) would only look to load options from ~/.indent.pro if it's there and -npro wasn't used on the command line. This option lets the user set their own path to the file.
Approved by: pfg (mentor)
Differential Revision: https://reviews.freebsd.org/D9010
For the case that someone set WITHOUT_GSSAPI=, now WITHOUT_KERBEROS_SUPPORT
will be properly set.
This will likely fix the issue for the default case noted in the PR I filed
back in 2011. I am trying to fix the less obvious case documented in the PR
still.
MFC after: 2 weeks
PR: 159745
During the clang/llvm 3.9.0 import, the build structure for it was
completely revamped. This broke the native-xtools target.
It first attempts to build libllvmminimal, then the llvm-tblgen and
clang-tblgen executables, but these fail to link because they are linked
to the 'full' libllvm by default, as they normally are during the
'world' stage.
To make these link against libllvmminimal instead, define TOOLS_PREFIX,
similarly as during the bootstrap-tools phase. The value itself is
empty, as we don't really want to use a prefix.
Reviewed by: imp
PR: 215684
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D9026
