This dynamic tag contains the location of the .rld_map section relative to
the location of the dynamic tag. For PIE MIPS binaries DT_MIPS_RLD_MAP can
not be used since it contains an absolute address. Without this change
GDB can not find the function program counters in other libraries and once
I apply this change I can successfully run info sharedlibraries again.
Reviewed By: kib
Differential Revision: https://reviews.freebsd.org/D17867
Previously the combination of relro (implicit), -z now and ifunc use
resulted in a segfault when applying ifuncs after relro (test binary
here just calls amd64_get_fsbase()):
| % env LD_DEBUG=1 libexec/rtld-elf/obj/ld-elf.so.1 a.out
| ...
| enforcing main obj relro
| ...
| resolving ifuncs
| reloc_jmpslot: *0x203198 = 0x189368ea4570
| zsh: bus error (core dumped) LD_DEBUG=1 obj/ld-elf.so.1 ~/a.out
Reported by: Shawn Webb
Reviewed by: kib
Sponsored by: The FreeBSD Foundation
It is unused after r340102, and more important, I do not see how to
define textsize in both practically useful and correct way, for binaries
with more that one executable segments.
Sponsored by: The FreeBSD Foundation
Do not use textsize and do not flush everything between map base and
base + textsize, because unmapped areas cannot be flushed.
This makes Obj_Entry textsize only use go away, and I will remove it
later.
Reported by: tuexen
Tested by: Mark Millard <marklmi26-fbsd@yahoo.com>
Sponsored by: The FreeBSD Foundation
This adds new keywords to rc/service to enable/disable a service's
rc.conf(5) variable and "delete" to remove the variable.
When the "service_delete_empty" variable in rc.conf(5) is set to "YES"
(default is "NO") an rc.conf.d file (in /etc/ or /usr/local/etc) is
deleted if empty after modification using "service $foo delete".
Submitted by: lme (modified)
Reviewed by: 0mp (previous version), lme, bcr
Relnotes: yes
Sponsored by: Smule, Inc.
Differential Revision: https://reviews.freebsd.org/D17113
One less non-trivial dependency of rtld on libc. Also,
amd64_set_fsbase() is to be converted to ifunc, which I do not want to
support inside rtld.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
In particular, do it before the first call to allocate_initial_tls(),
which contains MD parts to set the initial thread' TLS pointer.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
With lld-generated binaries the first PT_LOAD will usually be a read-only
segment unless you pass --no-rosegment. For those binaries the textsize is
determined by the next PT_LOAD. To allow both LLD and bfd 2.17 binaries to
be parsed correctly use the end of the last PT_LOAD that is marked as
executable instead.
I noticed that the value was wrong while adding some debug prints for some rtld
changes for CHERI binaries. `obj->textsize` only seems to be used by PPC so the
effect is untested. However, the value before was definitely wrong and the new
result matches the phdrs.
Reviewed By: kib
Approved By: brooks (mentor)
Differential Revision: https://reviews.freebsd.org/D17117
and runs scripts containing "KEYWORD: resume" with single "resume" argument.
Working example is the port sysutils/cpupdate that defines
extra_commands="resume" to reload CPU microcode cleared
by suspend/resume sequence.
This change does nothing for a system having no scripts with KEYWORD: resume.
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D15247
Currently, rc.inidiskless assumes that local system configuration
changes are kept in some mountable file system. For example,
nanobsd uses dedicated partition mounted as /cfg for this.
However, small embedded devices like MIPS routers may have no enough flash
space to keep full-blown file system but have only one or couple
small flash blocks to keep persistent local configuration overrides.
This change extends rc.initdiskless and introduces ability to run auxiliary
command /conf/T/M/extract that is supposed to extract configuration overrides
from such local storage.
For example, the command /conf/default/etc/extract may contain something like:
cd "$1" && bsdcpio --quiet -idu < /dev/map/cfg
bsdcpio command extracts compressed archive from the storage to /etc
assuming the storage is exposed by the kernel as /dev/map/cfg to userland.
PR: 204215
MFC after: 1 month
and make previously working configuration like this work again:
gif_interfaces="gif0"
gifconfig_gif0="1.1.1.1 2.2.2.2"
ifconfig_gif0="inet 192.168.1.1 192.168.1.2 netmask 255.255.255.252"
PR: 204700
MFC after: 1 month
if a network connection is available. This is not an issue when running
'service local_unbound setup' interactively, but can be on a diskless
system where local_unbound self-configures on every boot. To address
this, add explicit dependencies on netwait and defaultroute.
Submitted by: eugen
Approved by: re (gjb)
in r339413, a current pkgbase update problem came up. For users
testing pkgbase at the moment there is no (automatic) way to pick
up new base packages (yet).
As a result rather than also moving init(8) to its own package,
back out the part of the change in r339413 that moved rc* to its
own package and defer creating new packages until the
infrastructure is in place to handle these cases.
Both init and rc* are considered too problematic to be lost by
early adaptors at this stage.
Discussed with: brd
Reviewed by: brd
Approved by: re (gjb)
The reasons for this are forward looking to pkgbase:
* /sbin/init is a special binary; try not to replace it with
every package update because an rc script was touched.
(a follow-up commit will make init its own package)
* having rc in its own place will allow more easy replacement
of the rc framework with alternatives, such as openrc.
Discussed with: brd (during BSDCam), kmoore
Requested by: cem, bz
PR: 231522
Approved by: re (gjb)
Fix the issue with subtracting the TLS_TCB_SIZE too when we are trying to get
the 'where' in the R_PPC_TPREL32 case. At allocation time we added an offset
and the TLS_TCB_SIZE. This has to be subtracted as well.
Now all the issues reported are fixed. Tests were done on G4 and G5 PowerMac's.
Additionally I ran the tls tests from the gcc test suite and made sure the
results are as good as pre 338486.
Thanks to tuexen for reporting the malfunction and for patient testing.
Also testing thanks goes to jhibbits.
Reported by: tuexen
Discussed with: jhibbits, nwhitehorn
Approved by: re (gjb)
Pointyhat to: andreast
This is based on the amd64 implementation. Support for both PLT and
non-PLT (e.g. a global variable initilised with a pointer to an ifunc)
cases are supported.
We don't pass anything to the resolver as it is expected they will read
the ID registers directly, with the number of registers with CPU info
likely to increase in the future.
Reviewed by: kib
Approved by: re (gjb)
Differential Revision: https://reviews.freebsd.org/D17341
search_library_path().
This corrects the scope of libmap matches.
Reported and tested by: Andreas Longwitz <longwitz@incore.de>
Sponsored by: The FreeBSD Foundation
Approved by: re (gjb)
MFC after: 1 week
This is useful when lm_find() moves the match to the global mapping,
since lm_find() could be called with a same path more than once.
Reported and tested by: Andreas Longwitz <longwitz@incore.de>
Sponsored by: The FreeBSD Foundation
Approved by: re (gjb)
MFC after: 1 week
some TLS bits. This broke operation on the PowerMac. Namely one could not login.
At login the screen/shell was giving back lots of backslashes and the login
shell dumped core.
The fix to this issue is to revert the powerpc commit from 338486 and to
increase the TLS_TCB_SIZE to 16.
Reverting only did not help, login was possible but userland applications
aborted with strange messages.
I tested this patch with world/kernel builds and with port upgrades.
Additionally a full gcc8 bootstrap was successfully completed.
Reviewed by: jhibbits@
Approved by: re (Glen)
The above commit fixed handling overaligned TLS segments in libc's
TLS Variant I implementation, but rtld provides its own implementation
for dynamically-linked executables which lacks these fixes. Thus,
port these changes to rtld.
This was previously commited as r337978 and reverted in r338149 due to
exposing a bug the ARM rtld. This bug was fixed in r338317 by mmel.
Submitted by: James Clarke
Approved by: re (kib)
Reviewed by: kbowling
Testing by: kbowling (powerpc64), br (riscv), kevans (armv7)
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D16510
TLS_TCB_SIZE is already accounted in defobj-> tlsoffset so all these symbols
were incorrectly relocated by +8.
Note:
The only consumer (for all binaries on my ARM board) of R_ARM_TLS_TPOFF32
relocation is _ThreadRuneLocale variable. And the incorrectly relocated
ThreadRuneLocale accidentally pointed to zeroed memory before memory layout
change from D16510 had changed status quo.
MFC after: 3 weeks
Reviewed by: imp, jhb
Approved by: re (marius)
Transferring files in netascii format requires, among other things,
translating all CR characters to a CR,NUL pair. tftpd does this correctly
except when the CR occurs as the last octet of a packet. In that case, it
erroneously drops the NUL which should be part of the following packet. The
bug was caused by using 0 as a sentinel value in a variable that could
legitimately hold 0. Fix it by switching the sentinel value to -1.
PR: 178055
Reported by: Richard <rsitze@gmail.com>
Reviewed by: cem
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D16853
Michal Meloun reports that it breaks ctype (isspace()..) related
functions on armv7 so back out while we diagnose the issue.
Reported by: Michal Meloun <melounmichal@gmail.com>
Thsi helps with pkgbase by switching to CONFS so that ftpusers will be
properly tagged as a config file.
Approved by: will (mentor)
Differential Revision: https://reviews.freebsd.org/D16787
The above commit fixed handling overaligned TLS segments in libc's
TLS Variant I implementation, but rtld provides its own implementation
for dynamically-linked executables which lacks these fixes. Thus,
port these changes to rtld.
Submitted by: James Clarke
Reviewed by: kbowling
Testing byL kbowling (powerpc64), br (riscv), kevans (armv7)
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D16510
While here fix capitalization of a few nearby strings, add the
rtld's file name prefix so it's obvious where the message come
from, and return zero when "-h" is used.
Reviewed by: kib
MFC after: 2 weeks
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D16530
Some of the changes are in the libexec/tftpd directory, but to functions that
are only used by tftp(1) (they share some code).
* strcpy => strlcpy (1006793, 1006794, 1006796, 1006741)
* Unchecked return value and TOCTTOU (1009314)
* NULL pointer dereference (1018035, 1018036)
Reported by: Coverity
CID: 1006793, 1006794, 1006796, 1006741, 1009314, 1018035
CID: 1018036
MFC after: 2 weeks
tftpd(8) should flush a newly written file to disk before ACKing the final DATA
packet. Otherwise there is a narrow race window when a subsequent read may not
see the file. This is somewhat related to r330710, but the race window is much
smaller. Hopefully this will fix the intermittent tests in Jenkins.
Reported by: Jenkins
MFC after: 2 weeks
quatactl(2) mechanism. (Read-only at this point, however.)
In particular, this is to allow rpc.rquotad query quotas
for NFS mounts, allowing users to see their quotas on the
hosts using the datasets.
The changes specifically:
* Add new RPC entry points for querying quotas.
* Changes the library routines to allow non-UFS quotas.
* Changes rquotad to check for quotas on mounted filesystems,
rather than being limited to entries in /etc/fstab
* Lastly, adds a VFS entry-point for ZFS to query quotas.
Note that this makes one unavoidable behavioural change: if quotas
are enabled, then they can be queried, as opposed to the current
method of checking for quotas being specified in fstab. (With
ZFS, if there are user or group quotas, they're used, always.)
Reviewed by: delphij, mav
Approved by: mav
Sponsored by: iXsystems Inc
Differential Revision: https://reviews.freebsd.org/D15886
