The option was added only to ease the transition from GNU Binutils to
ELF Tool Chain tools, and that process is now complete (for the viable
replacements). Noting the removal in UPDATING is sufficient as we have
not shipped a release with the option.
Reviewed by: brooks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3240
ELF Tool Chain elfcopy is nearly a drop-in replacement for GNU objcopy,
but does not currently support PE output which is needed for building
x86 UEFI bits.
Add a src.conf knob to allow installing it as objcopy and set it by
default for aarch64 only, where we don't have a native binutils.
Reviewed by: bapt
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D2887
Rationale: ident(1) is useful out of RCS, lot of scripts are using ident(1) and
failing when base is built WITHOUT_RCS.
This version is:
- fully compatible with RCS 5.7 ident.
- fully compatible with RCS 5.9 ident.
- passes all ident test from GNU RCS 5.9 test suite
This version has support for: svn extension for the Keyword id (double colon and
# before last $)
Différences with GNU RCS ident:
- no long options as found in GNU RCS 5.9 (but not commented there).
- '-V' reports nothing but has been added for compatibility.
Differential Revision: https://reviews.freebsd.org/D3200
Reviewed by: pfg
macros on amd64 and i386. Move the definition to machine/param.h.
kgdb defines INKERNEL() too, the conflict is resolved by renaming kgdb
version to PINKERNEL().
On i386, correct the lowest kernel address. After the shared page was
introduced, USRSTACK no longer points to the last user address + 1 [*]
Submitted by: Oliver Pinter [*]
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Off by default, build behaves normally.
WITH_META_MODE we get auto objdir creation, the ability to
start build from anywhere in the tree.
Still need to add real targets under targets/ to build packages.
Differential Revision: D2796
Reviewed by: brooks imp
ELF toolchain readelf lacked some functionality at the time other tools
(like size, strip, nm, etc.) were switched over to the ELF toolchain
versions. That has been addressed as of the last update, so we can add
it to the list.
PR: 198950 [exp-run]
Reviewed by: bapt, imp, rpaulo
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D2156
Some users build FreeBSD as non-root in Perforce workspaces. By default,
Perforce sets files read-only unless they're explicitly being edited.
As a result, the -f argument must be used to cp in order to override the
read-only flag when copying source files to object directories. Bare use of
'cp' should be avoided in the future.
Update all current users of 'cp' in the src tree.
Reviewed by: emaste
MFC after: 1 week
Sponsored by: Spectra Logic
To be able to info pages consider installing texinfo from ports print/texinfo or
via pkg: pkg install texinfo
Differential Revision: https://reviews.freebsd.org/D1409
Reviewed by: emaste, imp (previous version)
Relnotes: yes
- Eliminate unused irqframe
- Eliminate unused saframe
- Instead of splitting r4-sp storage between the stack and switchframe,
just put all the registers in switchframe and eliminate the un_32 struct.
Submitted by: Svatopluk Kraus <onwahe@gmail.com>,
Michal Meloun <meloun@miracle.cz>
This speeds up building the directory from the bootstrap-tools stage in
buildworld as well as building from the subdirectory
Based on a patch submitted via -arch:
https://lists.freebsd.org/pipermail/freebsd-arch/2014-December/016493.html
MFC after: 1 week
Submitted by: Jia-Shiun Li <jiashiun@gmail.com>
Sponsored by: EMC / Isilon Storage Division
Prior to this change the build could fail as follows, if gperf is not
available (or fails):
- make(1) stops due to the gperf error, but an empty target file
(cfns.h) is still created
- the empty cfns.h is newer than the source cfns.gperf so it is not
regenerated on subsequent builds
- the gcc build fails (undefined reference to libc_name_p)
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Summary:
LLVM/Clang generates relocations that our binutils doesn't understand, but newer
binutils does. I got permission from the author of a series of patches to
relicense them as GPLv2 for use in FreeBSD. The upstream git hashes are:
ac2df442ac7901f00af15b272fc48b594b433713
2b95367962dc14f69d3c338c4d54195266e2e169
102890f04c44b64cf5cef4588267dd9f24086ac7
b7fcf6f6bb53b5027e111107f5416769cb9a5798
1d483afedd5a628dc84fb58d1d570f79fdfbfa7b
90aecf7a80c1cefeb45fc10a6cd02c8338e34b4c
3a71aa26df2a372a58e9c11ef9ba51fd0e83320a
727fc41e077139570ea8b8ddfd6c546b2a55627c
With the import of clang 3.5, and a few backported patches, we should be able to
move powerpc and powerpc64 to clang-as-cc soon.
Test Plan: Passes make tinderbox, so no regressions. Binaries built with clang
run on powerpc64.
Reviewers: #committers, dim
Reviewed By: dim
Differential Revision: https://reviews.freebsd.org/D1297
Obtained from: Alan Modra, upstream binutils-gdb git
MFC after: 3 weeks
Relnotes: yes
Set WITH_ELFTOOLCHAIN_TOOLS in src.conf to use the elftoolchain version
of the following tools:
* addr2line
* elfcopy (strip / mcs)
* nm
* size
* strings
Reviewed by: bapt (earlier version)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D1224
comparing it with NOCPU, which became -1 recently. While here, avoid
using it for address calculations if it is negative.
Reviewed by: jhb, adrian
MFC after: 1 week
gperf is used as a build tool for g++ and is not needed for Clang
architectures. Ports and third-party software that need it can use the
up-to-date devel/gperf port.
PR: 194103 (exp-run)
Reviewed by: bapt
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D886
the oabi is still in the tree, but it is expected this will be removed
as developers work on surrounding code.
With this commit the ARM EABI is the only supported supported ABI by
FreeBSD on ARMa 32-bit processors.
X-MFC after: never
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D876
1. 50+% of NO_PIE use is fixed by adding -fPIC to INTERNALLIB and other
build-only utility libraries.
2. Another 40% is fixed by generating _pic.a variants of various libraries.
3. Some of the NO_PIE use is a bit absurd as it is disabling PIE (and ASLR)
where it never would work anyhow, such as csu or loader. This suggests
there may be better ways of adding support to the tree. Many of these
cases can be fixed such that -fPIE will work but there is really no
reason to have it in those cases.
4. Some of the uses are working around hacks done to some Makefiles that are
really building libraries but have been using bsd.prog.mk because the code
is cleaner. Had they been using bsd.lib.mk then NO_PIE would not have
been needed.
We likely do want to enable PIE by default (opt-out) for non-tree consumers
(such as ports). For in-tree though we probably want to only enable PIE
(opt-in) for common attack targets such as remote service daemons and setuid
utilities. This is also a great performance compromise since ASLR is expected
to reduce performance. As such it does not make sense to enable it in all
utilities such as ls(1) that have little benefit to having it enabled.
Reported by: kib
Make sure everything linking to a privatelib and/or an internallib does it directly
from the OBJDIR rather than DESTDIR.
Add src.libnames.mk so bsd.libnames.mk is not polluted by libraries not existsing
in final installation
Introduce the LD* variable which is what ld(1) is expecting (via LDADD) to link to
internal/privatelib
Directly link to the .so in case of private library to avoid having to complexify
LDFLAGS.
Phabric: https://phabric.freebsd.org/D553
Reviewed by: imp, emaste
variants. This allows usable file system images (i.e. those with both a
shell and an editor) to be created with only one copy of the curses library.
Exp-run: antoine
PR: 189842
Discussed with: bapt
Sponsored by: DARPA, AFRL
nothing more. Force it to be "no" when MK_CXX is "no" to simplify
usage. It no longer also means "build g++" since we no longer have a
platform where that's interesting now that pc98 no longer needs clang
and gcc, but not g++. pc98 now just uses clang after boot2 changes.
statically linked into consumers (GDB and variants) in the base
system, and the shared library is no longer installed.
That also allows ports to be able to use a modern version of readline
PR: 162948
Reviewed by: emaste
This includes:
o All directories named *ia64*
o All files named *ia64*
o All ia64-specific code guarded by __ia64__
o All ia64-specific makefile logic
o Mention of ia64 in comments and documentation
This excludes:
o Everything under contrib/
o Everything under crypto/
o sys/xen/interface
o sys/sys/elf_common.h
Discussed at: BSDcan
This is currently an opt-in build flag. Once ASLR support is ready and stable
it should changed to opt-out and be enabled by default along with ASLR.
Each application Makefile uses opt-out to ensure that ASLR will be enabled by
default in new directories when the system is compiled with PIE/ASLR. [2]
Mark known build failures as NO_PIE for now.
The only known runtime failure was rtld.
[1] http://www.bsdcan.org/2014/schedule/events/452.en.html
Submitted by: Shawn Webb <lattera@gmail.com>
Discussed between: des@ and Shawn Webb [2]
This change adds tests/ directories in the source tree to create various
subdirectories in /usr/tests/ and to install placeholder Kyuafiles for
them.
the relevant hierarchies are: cddl, etc, games, gnu and secure.
The reason for this is to simplify the addition of new test programs for
utilities or libraries under any of these directories. Doing so on a
case by case basis is unnecessary and is quite an obscure process.
and finish the job. ncurses is now the only Makefile in the tree that
uses it since it wasn't a simple mechanical change, and will be
addressed in a future commit.
This targets the existing ARMv6 and ARMv7 SoCs that contain a VFP unit.
This is an optional coprocessors may not be present in all devices, however
it appears to be in all current SoCs we support.
armv6hf targets the VFP variant of the ARM EABI and our copy of gcc is too
old to support this. Because of this there are a number of WITH/WITHOUT
options that are unsupported and must be left as the default value. The
options and their required value are:
* WITH_ARM_EABI
* WITHOUT_GCC
* WITHOUT_GNUCXX
In addition, without an external toolchain, the following need to be left
as their default:
* WITH_CLANG
* WITH_CLANG_IS_CC
As there is a different method of passing float and double values to
functions the ABI is incompatible with existing armv6 binaries. To use
this a full rebuild of world is required. Because no floating point values
are passed into the kernel an armv6 kernel with VFP enabled will work with
an armv6hf userland and vice versa.
IPX was a network transport protocol in Novell's NetWare network operating
system from late 80s and then 90s. The NetWare itself switched to TCP/IP
as default transport in 1998. Later, in this century the Novell Open
Enterprise Server became successor of Novell NetWare. The last release
that claimed to still support IPX was OES 2 in 2007. Routing equipment
vendors (e.g. Cisco) discontinued support for IPX in 2011.
Thus, IPX won't be supported in FreeBSD 11.0-RELEASE.
commit c1acf022c533c5ae27e0cd556977eafe3f5959eb
Author: Brooks Davis <brooks@one-eyed-alien.net>
Date: Fri Jan 17 21:46:44 2014 +0000
Add an option WITHOUT_NCURSESW to suppress building and linking to
libncursesw. While wide character support it useful we'd like to
only need one ncurses library on embedded systems.
MFC after: 4 weeks
Sponsored by: DARPA, AFRL
standard core target by declaring coreops_suppress_target with
initializer. This is also happening for non-cross kgdb, by
virtue of having fbsd-threads.c in libgdb and having it do the
exact same thing. Since fbsd-threads.c is not included in in
libgdb when building a cross debugger, we ended up with more
than 1 core file targets (the standard gdb core file target and
kgdb's libkvm based core file target) and this behaves the same
as not having a core target at all.
implementation. This fixes the toolchain and kernel-toolchain targets
when building from older FreeBSD versions where make is fmake.
Reported by: luigi
Sponsored by: DARPA/AFRL
MFC after: 3 days
- Update FreeBSD version in:
- UPDATING
- sys/conf/newvers.sh
- Add 11.0 FreeBSD version for manual pages
- Bump __FreeBSD_version to 1100000
Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation
r256095:
- Add gnu/usr.bin/rcs back to the base system.
r256120:
- Add WITHOUT_RCS back to src.conf.5.
r256121:
- Remove UPDATING entry regarding gnu/usr.bin/rcs removal.
Requested by: many
Approved by: re (marius)
Discussed with: core
The libarchive-based replacements have been used since 2009; the GNU
ones were kept to support source upgrades from FreeBSD 6.
Approved by: re@ (delphij)
To enable them, set WITH_GCC and WITH_GNUCXX in src.conf.
Make clang default to using libc++ on FreeBSD 10.
Bumped __FreeBSD_version for the change.
GCC is still enabled on PC98, because the PC98 bootloader requires GCC to build
(or, at least, hard-codes the use of gcc into its build).
Thanks to everyone who helped make the ports tree ready for this (and bapt
for coordinating them all). Also to imp for reviewing this and working on the
forward-porting of the changes in our gcc so that we're getting to a much
better place with regard to external toolchains.
Sorry to all of the people who helped who I forgot to mention by name.
Reviewed by: bapt, imp, dim, ...
The old (2.1) GNU patch has outlived its days. The major
local changes have been moved into the less restrictedly
licensed patch(1) we adopted in usr.bin/ .
A much newer version of GNU patch is available in the
ports tree (devel/patch).
Disconnect from the build and remove.
-maes option, but not the -mpclmul option as I ran out of bits in
the 32 bit flags field... You can -D__PCLMUL__ to get this, but it
won't be compatible w/ clang and modern gcc...
Reviewed by: -current, -toolchain
As promised, drop the option to make the older GNU patch
the default.
GNU patch is still being built but something drastic may
happen to it to it before Release.
echo xxx | grep -D skip xxx
returns nothing. Instead of just removing added S_ISFIFO condition
(originally absent in this version of grep), make it work as latest
GNU version does: don't skip directories and devices if fd == STDIN_FILENO.
The BSD-licensed patch(1) command has matured and it's behaviour
can be considered equivalent to the older version of GNU patch
in the tree.
The switch has been extensively tested [1] and only two ports
presented regressions, which have since been fixed.
For convenience a new WITH_GNU_PATCH option is available,
but it will likely be removed in the near future.
PR: 176313
Approved by: portmgr
accurately fills the read buffer.
Callers of pgets() still mis-process the buffer contents if the read line
contains NUL characters, but this at least makes pgets() accurate.
The former makes a copy of stdin, but was not accurately putting the
content of stdin into a temp file. This lead to the undercounting
the number of lines in hunks containing NUL characters when reading
from stdin. Thus resulting in "unexpected end of file in patch" errors.
debug files for userland programs and libraries. The "-g" debug flag
is automatically applied when WITH_DEBUG_FILES is set.
The debug files are now named ${prog}.debug and ${shlib}.debug for
consistency with other systems and documentation. In addition they are
installed under /usr/lib/debug, to simplify the process of installing
them if needed after a crash. Users of bsd.{prog,lib}.mk outside of the
base system place the standalone debug files in a .debug subdirectory.
GDB automatically searches both of these directories for standalone
debug files.
Thanks to everyone who contributed changes, review, and testing during
development.
Change several int variables to size_t, ssize_t, or ptrdiff_t.
This should fix the bug described in CVE-2012-5667 when an input
line is so long that its length cannot be stored in an int
variable.
This is based on NetBSD's revision which says:
This change to NetBSD's version of GNU grep 2.5.1 (licenced under
GPLv2) was made without direct reference to any code licenced
under GPLv3.
Obtained from: NetBSD
MFC after: 3 days
When looking up the absolute path for a kld, call find_kld_path() first.
This enables locating the module in a different directory than the one
stored in kernel memory.
With this change, kgdb can now be run on a kernel & vmcore whose associated
modules are located in the same directory as the kernel. This makes
independent triaging of problems much easier.
This change also does not break the normal kgdb use case where no arguments
are specified; in that case kgdb loads the running kernel and its modules.
Reviewed by: adrian
Approved by: ken (mentor)
Sponsored by: Spectra Logic
MFC after: 1 month
* document the kgdb -b flag
* better verify what's valid with -b
* add more comprehensive command line help
PR: kern/175743
Submitted by: Christoph Mallon <christoph.mallon@gmx.de>
on a core, when the core was stopped, by calling kgdb_trgt_core_pcb().
This has 2 advantages:
1. We don't need to include a machine-specific header anymore and as
such kthr.c is truly machine independent. This allows the code to
be used in a cross-debugger.
2. We don't need to lookup stoppcbs in generic code when it's an
inherently target-spicific symbol. It does not exist for ia64.
Implement kgdb_trgt_core_pcb() for all architectures, except ia64, by
calling a common function called kgdb_trgt_stop_pcb(). This function
differs from kgdb_trgt_core_pcb() in that it gets the size of the PCB
structure as an argument and as such remains machine independent.
On ia64 the PCB for stopped cores is in the PCPU structure itself.
This for better scaling. The implementation of kgdb_trgt_core_pcb()
for ia64 uses the cpuid_to_pcpu[] array to to obtain the address of
the PCB structure.
DragonflyBSD and install it as bsdpatch. WITH_BSD_PATCH makes it
default and installs GNU patch as gnupatch.
Submitted by: pfg
Obtained from: The DragonflyBSD Project
be used on the host system (and not installed on the device, if required). The
GPL'd one is still available if there are any devices that need it (make
universe passes with it, including kernels that use fdt, but there may be some
out-of-tree ones). WITH_GPL_DTC can be used to select the old one, for now.
Probably won't be MFC'd, but we'll remove the GPL'd version in head after the
new one has had a lot more testing and ship it in 10.0.
This allows a remote session to be specified with '-r' as well as a
non-default baudrate setting using '-b'.
TODO: add to the kgdb manpage.
MFC after: 2 weeks
ARM EABI support is disabled by default and can be enabled by setting
WITH_ARM_EABI when building, however only the kernel-toolchain target will
work with this flag until the rest of the support is added.
