to the code for translating socket and private ioctls:
- Only perform socket ioctl translation if the file descriptor is a
socket.
- Treat socket ioctls on non-sockets specially, and for now assume
that these are directed at a tap/vmnet device, so translate the
ioctl numbers as appropriate (the way if_tap abuses some socket
ioctls to pass non-ifreq data is utterly bogus, but this is how
VMware on FreeBSD has always "worked"; I will deal with this
later).
- Add (untested) support for translating SIOCSIFADDR.
- In all cases where we fail to translate an ioctl, return ENOIOCTL
so that other handlers have a chance to do the translation.
This should fix the "/dev/vmnet1: Invalid argument" errors that
users of VMware were experiencing, though I have only verified this
on RELENG_4.
Submitted by: des (mostly)
MFC after: 3 days
sysctl_req', which describes in-progress sysctl requests. This permits
sysctl handlers to have access to the current thread, permitting work
on implementing td->td_ucred, migration of suser() to using struct
thread to derive the appropriate ucred, and allowing struct thread to be
passed down to other code, such as network code where td is not currently
available (and curproc is used).
o Note: netncp and netsmb are not updated to reflect this change, as they
are not currently KSE-adapted.
Reviewed by: julian
Obtained from: TrustedBSD Project
linux_emul_path anyway. Linux_emul_find() has interesting bugs in its
prefix handling (which luckily are not currently exploitable); this
commit is preliminary to an attempt at cleaning it up.
Approved by: marcel
in bind() and connect(). Linux doesn't care if the length of the
sockaddr matches its address family; FreeBSD does. This fixes the
known issues with the resolver in linux_base-7.
Add some missing break statements in the socket ioctl switch.
Check the return value from copyin() / copyout().
Fix some disorderings and misindentations.
Support a couple more socket ioctls.
Add missing break statements.
that appeared to be very different from the MI version. These
differences were mostly bogus and caused by copying octal
definitions and write them as hexadecimal values without doing
any base conversion (ie 010 was copied to 0x10). After filtering
out these differences, any remaining (real) incompatibilities
have been merged into the MI header file to make them more visible.
While here, fix the termios <-> termio conversion WRT to the c_cc
field for Alpha. The termios values do not match the termio values
and thus prevents us from copying.
By eliminating the Alpha MD copy of linux_ioctl.h we also fixed
the recent build breakage caused by putting new bits in the MI
header and not in the MD header.
Also slightly change the name translation policy - only rename interfaces
that have the IFF_BROADCAST flag set. This is not perfect, but is closer to
how Linux names network interfaces.
to work, but haven't really due to subtle differences in structs etc.
This is still not perfect (some ioctls are still known not to work, while
others haven't been tested at all), but it's enough to get Debian's ifconfig
to produce relatively sane output.
More work will be needed to get all ioctls (or at least a reasonable subset)
working, and to support the Cisco Aironet config tool mentioned in the PR.
PR: 26546
Submitted by: Doug Ambrisko <ambrisko@ambrisko.com>
We still have to account for a copyin. Make sure the copyin will
succeed by passing the FreeBSD syscall a pointer to userspace,
albeit one that's automagically mapped into kernel space.
Reported by: mr, Mitsuru IWASAKI <iwasaki@jp.FreeBSD.org>
Tested by: Mitsuru IWASAKI <iwasaki@jp.FreeBSD.org>
macro. The commit log clearly states that the index given to the
macro is one higher than previously used to index the array. This
wasn't represented in the code and resulted in kernel page faults.
Reported by: Andrew Atrens <atrens@nortelnetworks.com>
Note ALL MODULES MUST BE RECOMPILED
make the kernel aware that there are smaller units of scheduling than the
process. (but only allow one thread per process at this time).
This is functionally equivalent to teh previousl -current except
that there is a thread associated with each process.
Sorry john! (your next MFC will be a doosie!)
Reviewed by: peter@freebsd.org, dillon@freebsd.org
X-MFC after: ha ha ha ha
o Introduce private types for use in linux syscalls for two reasons:
1. establish type independence for ease in porting and,
2. provide a visual queue as to which syscalls have proper
prototypes to further cleanup the i386/alpha split.
Linuxulator types are prefixed by 'l_'. void and char have not
been "virtualized".
o Provide dummy functions for all syscalls and remove dummy functions
or implementations of truely obsolete syscalls.
o Sanitize the shm*, sem* and msg* syscalls.
o Make a first attempt to implement the linux_sysctl syscall. At this
time it only returns one MIB (KERN_VERSION), but most importantly,
it tells us when we need to add additional sysctls :-)
o Bump the kenel version up to 2.4.2 (this is not the same as the
KERN_VERSION MIB, BTW).
o Implement new syscalls, of which most are specific to i386. Our
syscall table is now up to date with Linux 2.4.2. Some highlights:
- Implement the 32-bit uid_t and gid_t bases syscalls.
- Implement a couple of 64-bit file size/offset bases syscalls.
o Fix or improve numerous syscalls and prototypes.
o Reduce style(9) violations while I'm here. Especially indentation
inconsistencies within the same file are addressed. Re-indenting
did not obfuscate actual changes to the extend that it could not
be combined.
NOTE: I spend some time testing these changes and found that if there
were regressions, they were not caused by these changes AFAICT.
It was observed that installing a RH 7.1 runtime environment
did make matters worse. Hangs and/or reboots have been observed
with and without these changes, so when it failed to make life
better in cases it doesn't look like it made it worse.
to make it emulate Linux kernel version 2.4.2, which is required
in order to upgrade the linux_base port to RH 7.1.
Note that this file is only needed for 32-bit architectures. To
us this means i386 (for now?)
the cwd is looked up inside the kernel. The native getcwd() in libc
handles this in userland if __getcwd() fails.
Obtained from: NetBSD via OpenBSD
Tested by: Chris Casey <chriss@phys.ksu.edu>, Markus Holmberg <markush@acc.umu.se>
Reviewed by: Darrell Anderson <anderson@cs.duke.edu>
PR: kern/24315
Replace the a.out emulation of 'struct linker_set' with something
a little more flexible. <sys/linker_set.h> now provides macros for
accessing elements and completely hides the implementation.
The linker_set.h macros have been on the back burner in various
forms since 1998 and has ideas and code from Mike Smith (SET_FOREACH()),
John Polstra (ELF clue) and myself (cleaned up API and the conversion
of the rest of the kernel to use it).
The macros declare a strongly typed set. They return elements with the
type that you declare the set with, rather than a generic void *.
For ELF, we use the magic ld symbols (__start_<setname> and
__stop_<setname>). Thanks to Richard Henderson <rth@redhat.com> for the
trick about how to force ld to provide them for kld's.
For a.out, we use the old linker_set struct.
NOTE: the item lists are no longer null terminated. This is why
the code impact is high in certain areas.
The runtime linker has a new method to find the linker set
boundaries depending on which backend format is in use.
linker sets are still module/kld unfriendly and should never be used
for anything that may be modular one day.
Reviewed by: eivind
real uid, saved uid, real gid, and saved gid to ucred, as well as the
pcred->pc_uidinfo, which was associated with the real uid, only rename
it to cr_ruidinfo so as not to conflict with cr_uidinfo, which
corresponds to the effective uid.
o Remove p_cred from struct proc; add p_ucred to struct proc, replacing
original macro that pointed.
p->p_ucred to p->p_cred->pc_ucred.
o Universally update code so that it makes use of ucred instead of pcred,
p->p_ucred instead of p->p_pcred, cr_ruidinfo instead of p_uidinfo,
cr_{r,sv}{u,g}id instead of p_*, etc.
o Remove pcred0 and its initialization from init_main.c; initialize
cr_ruidinfo there.
o Restruction many credential modification chunks to always crdup while
we figure out locking and optimizations; generally speaking, this
means moving to a structure like this:
newcred = crdup(oldcred);
...
p->p_ucred = newcred;
crfree(oldcred);
It's not race-free, but better than nothing. There are also races
in sys_process.c, all inter-process authorization, fork, exec, and
exit.
o Remove sigio->sio_ruid since sigio->sio_ucred now contains the ruid;
remove comments indicating that the old arrangement was a problem.
o Restructure exec1() a little to use newcred/oldcred arrangement, and
use improved uid management primitives.
o Clean up exit1() so as to do less work in credential cleanup due to
pcred removal.
o Clean up fork1() so as to do less work in credential cleanup and
allocation.
o Clean up ktrcanset() to take into account changes, and move to using
suser_xxx() instead of performing a direct uid==0 comparision.
o Improve commenting in various kern_prot.c credential modification
calls to better document current behavior. In a couple of places,
current behavior is a little questionable and we need to check
POSIX.1 to make sure it's "right". More commenting work still
remains to be done.
o Update credential management calls, such as crfree(), to take into
account new ruidinfo reference.
o Modify or add the following uid and gid helper routines:
change_euid()
change_egid()
change_ruid()
change_rgid()
change_svuid()
change_svgid()
In each case, the call now acts on a credential not a process, and as
such no longer requires more complicated process locking/etc. They
now assume the caller will do any necessary allocation of an
exclusive credential reference. Each is commented to document its
reference requirements.
o CANSIGIO() is simplified to require only credentials, not processes
and pcreds.
o Remove lots of (p_pcred==NULL) checks.
o Add an XXX to authorization code in nfs_lock.c, since it's
questionable, and needs to be considered carefully.
o Simplify posix4 authorization code to require only credentials, not
processes and pcreds. Note that this authorization, as well as
CANSIGIO(), needs to be updated to use the p_cansignal() and
p_cansched() centralized authorization routines, as they currently
do not take into account some desirable restrictions that are handled
by the centralized routines, as well as being inconsistent with other
similar authorization instances.
o Update libkvm to take these changes into account.
Obtained from: TrustedBSD Project
Reviewed by: green, bde, jhb, freebsd-arch, freebsd-audit
other "system" header files.
Also help the deprecation of lockmgr.h by making it a sub-include of
sys/lock.h and removing sys/lockmgr.h form kernel .c files.
Sort sys/*.h includes where possible in affected files.
OK'ed by: bde (with reservations)
linuxulator so as to allow privileged processes within a jail() to
invoke the Linux initgroups() system call. This allows the Linux
"su" to work properly (better) when running a complete Linux
environment under jail(). This problem was reported by Attila
Nagy <bra@fsn.hu>.
Reviewed by: marcel
is to return EINPROGRESS, EALREADY, (so_error ONCE), EISCONN. Certain
linux applications rely on the so_error (normally 0) being returned in
order to operate properly.
Tested by: Thomas Moestl <tmoestl@gmx.net>
