The assertion would never fire without truly spectacular future
programming errors.
Reported by: Coverity
CID: 1391367, 1391368
Sponsored by: DARPA, AFRL
many excluded regions causing a buffer overflow in the early boot code if
this value is too small.
Obtained from: ABT Systems Ltd
Sponsored by: Turing Robotic Industries
This change adds a new optional console method cn_resume and a kernel
console interface cnresume. Consoles that may need to re-initialize
their hardware after suspend (e.g., because firmware does not care to do
it) will implement cn_resume. Note that it is called in rather early
environment not unlike early boot, so the same restrictions apply.
Platform specific code, for platforms that support hardware suspend,
should call cnresume early after resume, before any console output is
expected.
This change fixes a problem with a system of mine failing to resume when
a serial console is used. I found that the serial port was in a strange
configuration and an attempt to write to it likely resulted in an
infinite loop.
To avoid adding cn_resume method to every console driver, CONSOLE_DRIVER
macro has been extended to support optional methods.
Reviewed by: imp, mav
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D15552
Add USB product ID for two GENESYS LOGIC ICs, found in DELOCK
In-Desk-Hub 61991
PR: 228489
Submitted by: "Harald Schmalzbauer" <bugzilla.freebsd@omnilan.de>
MFC After: 3 weeks
The hardware rate limiting feature is enabled by the RATELIMIT kernel
option. Please refer to ifconfig(8) and the txrtlmt option and the
SO_MAX_PACING_RATE set socket option for more information. This
feature is compatible with hardware transmit send offload, TSO.
A set of sysctl(8) knobs under dev.mce.<N>.rate_limit are provided to
setup the ratelimit table and also to fine tune various rate limit
related parameters.
Sponsored by: Mellanox Technologies
lists in the EFI memory map. As such we need to reduce the mappings to
restrict them to not be the full 1G block. For now reduce this to a 2M
block, however this may be further restricted to be 4k page aligned as
other SoCs may require.
This allows ThunderX2 to boot reliably to userspace without performing
any speculative memory accesses to invalid physical memory.
This is a recommit of r334035 now that we can access the EFI Runtime data
through the DMAP region.
Tested by: tuexen
Sponsored by: DARPA, AFRL
The 64-bit atomics defined for i386 are currently only available in
the kernel space.
Found by: cy@
MFC after: 1 week
Sponsored by: Mellanox Technologies
While at it add missing _acq_ and _rel_ variants for 64-bit atomic
operations under i386.
Reviewed by: kib @
MFC after: 1 week
Sponsored by: Mellanox Technologies
Due to an oversight in r195280, auditon(A_SETCLASS, ...) would cause a tailq
element to get added to the tailq twice, resulting in a circular tailq. This
panics when INVARIANTS are on.
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D15381
The GMII control bit ETH_MAC_CR_GMII_EN_ is not documented in
LAN78xx datasheets, but from the permissively licensed header provided
by Microchip it is:
#define ETH_MAC_CR_GMII_EN (0x00080000UL ) // GMII/RGMII Selection
is that current one (mass storage device) doesn't work as it is - it
needs to be set to 0 after the LUN is configured, which is what the
cfumass rc script does. In other words: the current default does not
work, and to actually make it work it had to be set to -1 in
/boot/loader.conf.
Reviewed by: hselasky@
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
- Add support for Leadtek WinFast Tv2000 XP bktr card
- Add support for PHILIPS FI1216
PR: 94369
Submitted by: Angelescu Ovidiu <mrhsaacdoh@yahoo.com>
Submitted on: 2006-03-11 19:30 UTC
that the map entry is wired if the caller passes the flag VM_FAULT_WIRE.
Eliminate the same assertion, but spelled differently, at the end of
vm_fault_hold() and vm_fault_populate(). Repeat the assertion only if the
map is unlocked and the map lookup must be repeated.
Reviewed by: kib
MFC after: 10 days
Differential Revision: https://reviews.freebsd.org/D15582
This reduces the CPU cycle wastage on power9, which is SMT4. Any idle
thread that's spinning is simply starving working threads on the same core
of valuable resources.
This can be reduced further by taking more advantage of the PSSCR supported
states, as well as permitting state loss, as is currently done for power8.
The currently implemented stop state is the lowest latency, which may still
consume resources.
The sleep for I/O completion during an NFSv4.1 pNFS layout recall used
the wrong event value and could result in the "[nfscl]" thread hung
for the mount.
This patch fixes the event to be the correct.
This bug will only affect NFSv4.1 pnfs mounts and only when the server
does a layout recall callback, so it won't affect many. Without the patch,
a mount without the "pnfs" option will avoid the problem.
Found during testing of the pNFS server.
MFC after: 1 week
vendor provided pmu-events tables and sundry cleanups.
The vendor pmu-events tables provide counter descriptions, default
sample rates, event, umask, and flag values for all the counter
configuration permutations. Using this gives us:
- much simpler kernel code for the MD component
- helpful long and short event descriptions
- simpler user code
- sample rates that won't overload the system
Update man page with newer sample types and remove unused sample type.
vendor provided pmu-events tables and sundry cleanups.
The vendor pmu-events tables provide counter descriptions, default
sample rates, event, umask, and flag values for all the counter
configuration permutations. Using this gives us:
- much simpler kernel code for the MD component
- helpful long and short event descriptions
- simpler user code
- sample rates that won't overload the system
Update man page with newer sample types and remove unused sample type.
Squashed commit of the following:
commit 4459d43eff815bec08ccc5533dbe5de846f03128
Author: Matt Macy <mmacy@mattmacy.io>
Date: Sat May 26 00:06:31 2018 -0700
libpmc: fix pmu function signatures for non amd64
commit a2cb8bbc586c65d41f9b291430a2261ec67b59fe
Author: Matt Macy <mmacy@mattmacy.io>
Date: Fri May 25 22:38:11 2018 -0700
pmcstat: fix indentation of usage
commit f686954b15ff56a833ac80404898977cb80a265b
Author: Matt Macy <mmacy@mattmacy.io>
Date: Fri May 25 22:19:49 2018 -0700
pmclog(3): add callchain and pmcallocatedyn, remove pcsample
commit 73e13a0d2e9498c81c150d14d022050cee7511bb
Author: Matt Macy <mmacy@mattmacy.io>
Date: Fri May 25 22:19:00 2018 -0700
pmclog.h: GC pcsample field
commit 3e93ffd65da641fa657539dad3c48e281f8b5798
Author: Matt Macy <mmacy@mattmacy.io>
Date: Fri May 25 22:05:57 2018 -0700
hwpmc: make Intel core CPUs use external event tables
commit 634f5fae1e1644ac324003136c66cd9c619d1c93
Author: Matt Macy <mmacy@mattmacy.io>
Date: Fri May 25 22:00:06 2018 -0700
pmclog: update log record types, bump PMC_MAJOR
- explicitly make log record types a multiple of 8 bytes
- hook in pmu event types for pmc_allocate records
- remove references to no longer PCSAMPLE record
commit 83d84fcd2d65bdf6ddcb2e155a22f0cfa2a9c225
Author: Matt Macy <mmacy@mattmacy.io>
Date: Fri May 25 21:52:10 2018 -0700
libpmc: add support for having vendor table driven pmc_allocate
commit 9e6ad63c40c2fce8404847ace5078ca6cb33a736
Author: Matt Macy <mmacy@mattmacy.io>
Date: Fri May 25 19:11:33 2018 -0700
hwpmc_core: add accessors for EVSEL & UMASK, make IAP_UMASK useful to user
commit 859dceb93daa6419a48c794db99b6758e5b041c9
Author: Matt Macy <mmacy@mattmacy.io>
Date: Fri May 25 19:09:45 2018 -0700
pmcstat: update usage and man page as well as make -L consistent with pmccontrol
commit 79c7d8597e28c2eb13f5f9113e65ec2792ca57b1
Author: Matt Macy <mmacy@mattmacy.io>
Date: Fri May 25 18:07:03 2018 -0700
pmu_util: add support for all current intel event keywords
commit d8089c7f6a6c8527f38324252b1ffb47004694c6
Author: Matt Macy <mmacy@mattmacy.io>
Date: Fri May 25 17:45:00 2018 -0700
add description for new arguments
commit 058336740bab53c62ec88a3a026ea848cf3878c6
Author: Matt Macy <mmacy@mattmacy.io>
Date: Fri May 25 17:38:15 2018 -0700
libpmc: move pmu_events table and pmu_utils out of libpmcstat so that they can be used by pmc_allocate
commit 049b66b382e2f833c3f47bc8df9e750cb265709f
Author: Matt Macy <mmacy@mattmacy.io>
Date: Fri May 25 16:12:41 2018 -0700
pmcstat: hook pmu_events counter description utility routines in
commit f5e01e7b37a691dc045e1aa16b3ebdd162515de8
Author: Matt Macy <mmacy@mattmacy.io>
Date: Fri May 25 16:11:59 2018 -0700
pmu_events: add utility routines for listing counters and their descriptions
commit cba4d4f8907f772279f86f18f915e0d74d33ac56
Author: Matt Macy <mmacy@mattmacy.io>
Date: Fri May 25 16:09:50 2018 -0700
pmu-events: expand out skylake regex to simplify string matches
omcast was used without being initialized in the non-multicast case.
The only effect was that the interface's multicast output counter could be
incorrect.
Reported by: Coverity
CID: 1379662
MFC after: 3 days
Sponsored by: Dell EMC
POWER9 supports Radix page tables in addition to Hashed page tables. When
Radix page tables are in use, the TLB is cut in half, so that half of the
TLB is used for the page walk cache. This is the default behavior, however
FreeBSD currently does not support Radix tables. Clear this bit so that we
can use the full TLB. Do this in the MMU logic so that configuration can be
localized to the specific translation format. Once we do support Radix
tables, the setup for that will be localized to the Radix MMU kobj.
superpage mappings were already being created by automatic promotion in
vm_fault_populate(), this change reduces the cost of creating those
mappings. Essentially, one pmap_enter(..., psind=1) call takes the place
of 512 pmap_enter(..., psind=0) calls, and that one pmap_enter(...,
psind=1) call eliminates the allocation of a page table page.
Reviewed by: kib
MFC after: 10 days
Differential Revision: https://reviews.freebsd.org/D15572
ixl(4)'s nvmupdate utility expects the nvmupdate process to run
while the interface is down; these nvm update commands use the
admin queue, so the admin queue needs to be able to generate
interrupts and be processed while the interface is down.
So add a flag that ixl(4) sets that lets the entire admin task
run even when the interface is marked down/IFF_DRV_RUNNING isn't set.
With this change, nvmupdate should function like it did pre-iflib.
Reviewed by: gallatin@, sbruno@
MFC after: 1 week
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D15575
Summary:
PowerISA 2.03 and later require bits 14:65 in the RB register argument,
which is the full value of the vpn argument post-shift. Only POWER4, POWER4+,
and PPC970* need the upper 16 bits cropped.
With this change FreeBSD can boot to multi-user on POWER9.
Reviewed by: nwhitehorn
Differential Revision: https://reviews.freebsd.org/D15581
The vadvise syscall (aka ovadvise) is undocumented and has always been
implmented as returning EINVAL. Put the syscall under COMPAT11 and
provide a userspace implementation.
Reviewed by: kib
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D15557
an rtentry. r334118 introduced a case when this was not done.
While we're here make the intent more obvious by moving the refcount
bump down to when we know we'll actually need it.
Reported by: markj
Since GENERIC includes quite a few drivers now, all MMC drivers should have
appropriate MMCCAM-related ifdefs and include opt_mmccam.h so that
those ifdefs are actually processed correctly.
Reviewed by: manu
Approved by: imp (mentor)
Differential Revision: https://reviews.freebsd.org/D15569
Previously lan78xx_chip_init locked the driver's mutex if not already
locked, but unlocked it only in the case of error. This provided a
fairly clear indication that the function is already called with the
lock held, so just replace it with a lock assertion.
Sponsored by: The FreeBSD Foundation
Supported Microchip devices:
- LAN7515 USB 2 hub and gigabit Ethernet controller w/ PHY
- LAN7800 USB 3.0 gigabit Ethernet controller w/ PHY
The LAN7515 is the Ethernet controller on the Raspberry Pi 3 B+.
This driver has some TODO items outstanding, but basic functionality
works.
Sponsored by: The FreeBSD Foundation
In particular, stop using pmap_pte() to read non-promoted pte while
walking the page table. pmap_pte() needs to shoot down the kernel
mapping globally which causes IPI broadcast. Since
pmap_extract_and_hold() is used for slow copyin(9), it is very
significant hit for the 4/4 kernels.
Instead, create single purpose per-processor page frame and use it to
locally map page table page inside the critical section, to avoid
reuse of the frame by other thread if context switched.
Measurement demostrated very significant improvements in any load that
utilizes copyin/copyout.
Found and benchmarked by: bde
Sponsored by: The FreeBSD Foundation
This code was left over when it was imported from Linux. The original
committer thought that those functions would be implemented, so the
prototypes where left in place. Delete them at once.
Submitted by: pratyush
Reviewed by: royger
Differential Review: https://reviews.freebsd.org/D15553
The TSC-s are checked and synchronized only if they were good
originally. That is, invariant, synchronized, etc.
This is necessary on an AMD-based system where after a wakeup from STR I
see that BSP clock differs from AP clocks by a count that roughly
corresponds to one second. The APs are in sync with each other. Not
sure if this is a hardware quirk or a firmware bug.
This is what I see after a resume with this change:
SMP: passed TSC synchronization test after adjustment
acpi_timer0: restoring timecounter, ACPI-fast -> TSC-low
Reviewed by: kib
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D15551
It turns out that sendfile_swapin() has an optimization where it may
insert pointers to bogus_page into the page array that it passes to
VOP_GETPAGES. That happens to work with buffer cache, because it
extensively uses bogus_page internally, so it has the necessary checks.
However, ZFS did not expect bogus_page as VOP_GETPAGES(9) does not
document such a (ab)use of bogus_page.
So, this commit adds checks and handling of bogus_page.
I expect that use of bogus_page with VOP_GETPAGES will get documented
sooner rather than later.
Reported by: Andrew Reilly <areilly@bigpond.net.au>, delphij
Tested by: Andrew Reilly <areilly@bigpond.net.au>
Requested by: many
MFC after: 1 week
- Remove layering violation, when NVMe SIM code accessed CAM internal
device structures to set pointers on controller and namespace data.
Instead make NVMe XPT probe fetch the data directly from hardware.
- Cleanup NVMe SIM code, fixing support for multiple namespaces per
controller (reporting them as LUNs) and adding controller detach support
and run-time namespace change notifications.
- Add initial support for namespace change async events. So far only
in CAM mode, but it allows run-time namespace arrival and departure.
- Add missing nvme_notify_fail_consumers() call on controller detach.
Together with previous changes this allows NVMe device detach/unplug.
Non-CAM mode still requires a lot of love to stay on par, but at least
CAM mode code should not stay in the way so much, becoming much more
self-sufficient.
Reviewed by: imp
MFC after: 1 month
Sponsored by: iXsystems, Inc.
I'm in the process of reworking how the reset path works with an eye
to better recovery when the chips hang and/or go RF/PHY deaf.
This is the first step in a lot of unification and API changes.
Shortly, we'll be moving to defining bzero and memset in terms of
__builting_memset. To do that, we can't have macro calls to bzero in
the fallback impelmentation of memset. Normal calls to bzero are fine.
All 4 architectures that use this have their own copies of bzero, so
there's no mutual recursion issue between memset and bcopy.
to themselves. The updated code assumed that that could not happen
and would try to lock the unp mutex twice.
There may be a lingering issue here but this fixes it for the
reporter.
PR: 228458
Reported by: marieheleneka at gmail.com
Make memmove the primary interface, but have bcopy be an alternative
entry point that jumps into memmove. This will slightly pessimize
bcopy calls, but those are about to get much rarer. Return dst always,
but it will be ignored by bcopy callers. We can remove just the alt
entry point if we ever remove bcopy entirely.
Differential Revision: https://reviews.freebsd.org/D15374
Make a memmove entry point just before bcopy and have it swap its args
before continuing into the body of bcopy. Adjust the returns to return
dst (original %o0 swapped to %o1) from both entry points. bcopy users
will ignore them. Since these are in the branch delay slot, it should
take no additional time. I use %o6 for this rather than just move %o1
back to %o2 at the end since my sparc64 assembler knowledge is weak.
Also eliminate wrapper call from memmove to bcopy.
Differential Revision: https://reviews.freebsd.org/D15374
memcpy was an alias for bcopy with arg swap. This code handles
overlapping copies, so making memmove an alias is safe. We can
eliminate the call from libkern's memmove to this bcopy as a result.
Differential Revision: https://reviews.freebsd.org/D15374
It was introduced to the tree in r169320 and r169321 in May 2007.
It never got much use and never became a kernel default. The code
duplicates the default path quite a bit, with slight modifications. Just
yank out the cruft. Whatever goals were being aimed for can probably be met
within the existing framework, without a flag day option.
Mostly mechanical change: 'unifdef -m -UINTR_FILTER'.
Reviewed by: mmacy
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D15546
This should have been done when they were removed from libc, but was
overlooked in the runup to 11.0. No users should exist.
Approved by: andrew
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D15539
This driver was developed for the LAN7800 and the register-compatible
LAN7515 and has only been tested on those devices. Adding support for
other members of the family should be straightforward, once we have
devices to test.
With this change the driver will probe but fail to attach due to the
Chip ID check, but will leave a hint leading to the driver that needs
work.
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D15537
We're dropping the periph lock then dropping the refcount. However,
that violates the locking protocol and is racy. This seems to be
the cause of weird occasional panics with a bogus assert.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D15517
Instead, construct an auxargs array and copy it out all at once.
Use an array of Elf_Auxinfo rather than pairs of Elf_Addr * to represent
the array. This is the correct type where pairs of words just happend
to work. To reduce the size of the diff, AUXARGS_ENTRY is altered to act
on this array rather than introducing a new macro.
Return errors on copyout() and suword() failures and handle them in the
caller.
Incidentally fixes AT_RANDOM and AT_EXECFN in 32-bit linux on amd64
which incorrectly used AUXARG_ENTRY instead of AUXARGS_ENTRY_32
(now removed due to the use of proper types).
Reviewed by: kib
Comments from: emaste, jhb
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D15485
