netbsd-tests.test.mk (r289151)
- Eliminate explicit OBJTOP/SRCTOP setting
- Convert all ad hoc NetBSD test integration over to netbsd-tests.test.mk
- Remove unnecessary TESTSDIR setting
- Use SRCTOP where possible for clarity
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Divison
- Always set td_dbg_sc_* when P_TRACED is set on system call entry
even if the debugger is not tracing system call entries. This
ensures the fields are valid when reporting other stops that
occur at system call boundaries such as for PT_FOLLOW_FORKS or
when only tracing system call exits.
- Set TDB_SCX when reporting the stop for a new child process in
fork_return(). This causes the event to be reported as a system
call exit.
- Report a system call exit event in fork_return() for new threads in
a traced process.
- Copy td_dbg_sc_* to new threads instead of zeroing. This ensures
that td_dbg_sc_code in particular will report the system call that
created the new thread or process when it reports a system call
exit event in fork_return().
- Add new ptrace tests to verify that new child processes and threads
report system call exit events with a valid pl_syscall_code via
PT_LWPINFO.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D3822
getppid() after a debugger process that is not the parent has attached.
Reviewed by: kib (earlier version)
Differential Revision: https://reviews.freebsd.org/D3615
- Add cdev-related tests for bad args.
- Add two simple tests cases for mapping /dev/zero that test for
MAP_ANON-like behavior.
Reviewed by: alc, kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D3323
original parent. Otherwise the debugee will be set as an orphan of
the debugger.
Add tests for tracing forks via PT_FOLLOW_FORK.
Reviewed by: kib
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D2809
cleanup routines can be executed at any point during the execution of the
body, including even before the body has done any real work. In those
cases, cleanup routines should be careful to not raise spurious errors so
as to not "override" the actual result of the test case.
This is just general good coding style but is not a problem in practice
for these specific tests. (The way I discovered the issue, though, was
due to a regression I introduced in Kyua itself while refactoring some
internals.)
MFC after: 1 week
processes and do not rely on EOF due to a close() in the debugger.
PR: 200489
Differential Revision: https://reviews.freebsd.org/D2674
Reviewed by: kib, ngie, rodrigc
traced by another process such as a debugger). The parent process does
need to check for matching orphan pids to avoid returning ECHILD if an
orphan has exited, but it should not return the exited status for the
child until after the debugger has detached from the orphan process
either explicitly or implicitly via wait().
Add two tests for for this case: one where the debugger is the direct
child (thus the parent has a non-empty children list) and one where
the debugger is not a direct child (so the only "child" of the parent
is the orphan).
Differential Revision: https://reviews.freebsd.org/D2644
Reviewed by: kib
MFC after: 2 weeks
not the old parent. Otherwise, proc_reap() will leave the zombie in place
resulting in the process' status being returned twice to its parent.
Add test cases for PT_TRACE_ME and PT_ATTACH which are fixed by
this change.
Differential Revision: https://reviews.freebsd.org/D2594
Reviewed by: kib
MFC after: 2 weeks
This is being done to fix breakage with make distribution with read-only
source trees as make distribution doesn't use make obj like building
tests/ does in all cases
Reported by: Wolfgang Zenker <wolfgang@lyxys.ka.sub.org>
Suggested by: jhb
X-MFC with: r282059
MFC after: 1 week
no longer bombs out
PLAIN_REQUIRE_KERNEL_MODULE: use printf + _exit, no err so the testcase no
longer bombs out if it prints to stderr
MFC after: 5 days
As jhb noted, the actual mmap(2) implementation is under sys/vm, not
sys/kern/, so the correct logical place is tests/sys/vm/, not
tests/sys/kern/
X-MFC with: r282076
MFC after: 6 days
for counter mode), and AES-GCM. Both of these modes have been added to
the aesni module.
Included is a set of tests to validate that the software and aesni
module calculate the correct values. These use the NIST KAT test
vectors. To run the test, you will need to install a soon to be
committed port, nist-kat that will install the vectors. Using a port
is necessary as the test vectors are around 25MB.
All the man pages were updated. I have added a new man page, crypto.7,
which includes a description of how to use each mode. All the new modes
and some other AES modes are present. It would be good for someone
else to go through and document the other modes.
A new ioctl was added to support AEAD modes which AES-GCM is one of them.
Without this ioctl, it is not possible to test AEAD modes from userland.
Add a timing safe bcmp for use to compare MACs. Previously we were using
bcmp which could leak timing info and result in the ability to forge
messages.
Add a minor optimization to the aesni module so that single segment
mbufs don't get copied and instead are updated in place. The aesni
module needs to be updated to support blocked IO so segmented mbufs
don't have to be copied.
We require that the IV be specified for all calls for both GCM and ICM.
This is to ensure proper use of these functions.
Obtained from: p4: //depot/projects/opencrypto
Relnotes: yes
Sponsored by: FreeBSD Foundation
Sponsored by: NetGate
Using PROG instead of PROGS will in cases of high -j with -DNO_ROOT cause
the PROG to show up more than once as it's handling the SCRIPTS install case
in a recursive manner, separate from the non-recursive case
After the recent batch of commits to bsd.progs.mk to fix behavior with how
variables are defaulted to, explicitly setting SRCS for a PROG is no longer
required
MFC after: 1 week
Reviewed by: asomers
Phabric: D1130
Sponsored by: EMC / Isilon Storage Division
This causes the directory traversing Kyuafile to be installed, which in turn
causes tests/sys/pjdfstest to always be run from /usr/tests/sys
Let KYUAFILE default to auto, so the file generated by suite.test.mk gets
installed instead
MFC after: 1 week
pjdfstest execution is opt-in and must be done as root due to some of the
assumptions made by the test suite and lack of error checking in the non-root
case
A description of how to execute pjdfstest with kyua is provided in
share/pjdfstest/README
Phabric: D824 (an earlier prototype patch)
MFC after: 1 month
Relnotes: yes
Sponsored by: EMC / Isilon Storage Division
fibs. Use the mbuf's or the socket's fib instead of RT_ALL_FIBS. Fixes PR
187553. Also fixes netperf's UDP_STREAM test on a nondefault fib.
sys/netinet/ip_output.c
In ip_output, lookup the source address using the mbuf's fib instead
of RT_ALL_FIBS.
sys/netinet/in_pcb.c
in in_pcbladdr, lookup the source address using the socket's fib,
because we don't seem to have the mbuf fib. They should be the same,
though.
tests/sys/net/fibs_test.sh
Clear the expected failure on udp_dontroute.
PR: 187553
CR: https://reviews.freebsd.org/D772
MFC after: 3 weeks
Sponsored by: Spectra Logic
tests/sys/kern/unix_seqpacket_test.c
* Remove a duplicate error check in mk_pair_of_sockets
* Always close sockets in the success path of ATF test cases. Don't
bother with the error paths, because those are mostly assertions
anyway. Most of these socket leaks were reported by Coverity.
All of them are harmless, because each ATF test case runs in its
own process.
* Fix the len argument to send in shutdown_send and
shutdown_send_sigpipe. The old version was using sizeof a pointer
instead of sizeof the char array. Reported by Coverity.
* Change a few ATF_CHECK to ATF_REQUIRE if the test can't reasonably
continue past a failure.
Reported by: Coverity Scan
CID: 1229995, 1229991, 1229988, 1229994, 1229989, 1229992
CID: 1229993, 1229990, 1229984, 1229967, 1230005, 1229977
CID: 1229966, 1230004, 1229976
MFC after: 1 week
Sponsored by: Spectra Logic
ifa_ifwithnet() and ifa_ifwithdstaddr() The legacy functions will call the
_fib() versions with RT_ALL_FIBS, preserving legacy behavior.
sys/net/if_var.h
sys/net/if.c
Add legacy-compatible functions as described above. Ensure legacy
behavior when RT_ALL_FIBS is passed as fibnum.
sys/netinet/in_pcb.c
sys/netinet/ip_output.c
sys/netinet/ip_options.c
sys/net/route.c
sys/net/rtsock.c
sys/netinet6/nd6.c
Call with _fib() functions if we must use a specific fib, or the
legacy functions otherwise.
tests/sys/netinet/fibs_test.sh
tests/sys/netinet/udp_dontroute.c
Improve the udp_dontroute test. The bug that this test exercises is
that ifa_ifwithnet() will return the wrong address, if multiple
interfaces have addresses on the same subnet but with different
fibs. The previous version of the test only considered one possible
failure mode: that ifa_ifwithnet_fib() might fail to find any
suitable address at all. The new version also checks whether
ifa_ifwithnet_fib() finds the correct address by checking where the
ARP request goes.
Reported by: bz, hrs
Reviewed by: hrs
MFC after: 1 week
X-MFC-with: 264905
Sponsored by: Spectra Logic
