is actually the opposite of that stated in the comment.
Remove an unnecessary assignment. Use an assertion to document the fact
that no assignment is needed.
Rewrite another comment to clarify that the page is not completely valid.
Reviewed by: kib
the current offset (spelled: "fs.pindex") until it is known whether a
backing object exists. In fact, if not for the fact that the backing
object offset is zero when there is no backing object, this update would
produce a broken offset.
Reviewed by: kib
cleanup consists of fixes to comments. However, there is one change to
code: Remove special-case handling of errors involving the kernel map.
We do not perform I/O on the kernel map, so there is no need for this
special case.
Reviewed by: kib (an earlier version)
for limiting disk (actually filesystem) IO.
Note that in some cases these limits are not quite precise. It's ok,
as long as it's within some reasonable bounds.
Testing - and review of the code, in particular the VFS and VM parts - is
very welcome.
MFC after: 1 month
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D5080
o With new KPI consumers can request contiguous ranges of pages, and
unlike before, all pages will be kept busied on return, like it was
done before with the 'reqpage' only. Now the reqpage goes away. With
new interface it is easier to implement code protected from race
conditions.
Such arrayed requests for now should be preceeded by a call to
vm_pager_haspage() to make sure that request is possible. This
could be improved later, making vm_pager_haspage() obsolete.
Strenghtening the promises on the business of the array of pages
allows us to remove such hacks as swp_pager_free_nrpage() and
vm_pager_free_nonreq().
o New KPI accepts two integer pointers that may optionally point at
values for read ahead and read behind, that a pager may do, if it
can. These pages are completely owned by pager, and not controlled
by the caller.
This shifts the UFS-specific readahead logic from vm_fault.c, which
should be file system agnostic, into vnode_pager.c. It also removes
one VOP_BMAP() request per hard fault.
Discussed with: kib, alc, jeff, scottl
Sponsored by: Nginx, Inc.
Sponsored by: Netflix
On vm_page_rename failure, fix a missing object unlock and a double free of
a page.
First remove the old page, then rename into other page into first_object,
then free the old page. This avoids the problem on rename failure. This is
a little ugly but seems to be the most straightforward solution.
Tested with:
$ sysctl debug.fail_point.uma_zalloc_arg="1%return"
$ kyua test -k /usr/tests/sys/Kyuafile
Submitted by: Ryan Libby <rlibby@gmail.com>
Reviewed by: kib
Seen by: alc
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D4326
which constitute the majority of the pages that are processed by
vm_fault_dontneed(), are already near the tail of the inactive queue. Only
the pages at faulting virtual addresses are actually moved by
vm_page_advise(..., MADV_DONTNEED). However, vm_page_advise(...,
MADV_DONTNEED) is simultaneously too aggressive and passive for the moved
pages. It makes most of these pages too easily reclaimable, and at the same
time it leaves enough pages in the active queue to trigger pageouts by the
page daemon. Instead, with this change, the pages at faulting virtual
addresses are moved to the tail of the inactive queue, where they are
relatively close to the pages prefetched by the same page fault.
Discussed with: jeff
Sponsored by: EMC / Isilon Storage Division
the VM_FAULT_CHANGE_WIRING flag to VM_FAULT_WIRE. Assert that the
flag is only passed when faulting on the wired map entry. Remove the
vm_page_unwire() call, which should be never reachable.
Since VM_FAULT_WIRE flag implies wired map entry, the TRYPAGER() macro
is reduced to the testing of the fs.object having a default pager.
Inline the check.
Suggested and reviewed by: alc
Tested by: pho (previous version)
MFC after: 1 week
in the requested array, then it is responsible for disposition of previous
page and is responsible for updating the entry in the requested array.
Now consumers of KPI do not need to re-lookup the pages after call to
vm_pager_get_pages().
Reviewed by: kib
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
that performs the equivalent of an automatic madvise(..., MADV_DONTNEED).
The current heuristic, even with the improvements that I made a few years
ago, is a good example of making the wrong trade-off, or optimizing for
the infrequent case. The infrequent case being reading a single file that
is much larger than memory using mmap(2). And, in this case, the page
daemon isn't the bottleneck; it's the I/O.
In all other cases, the current heuristic has too many false positives,
i.e., it caches too many pages that are later reused. To give one
example, thousands of pages are cached by the current heuristic during a
buildworld and all of them are reactivated before the buildworld
completes. In particular, clang reads source files using mmap(2) and
there are some relatively large source files in our source tree, e.g.,
sqlite, that are read multiple times. With the new heuristic, I see fewer
false positives and they have a much lower cost.
I actually tried something like this more than two years ago and it
didn't perform as well as the cache behind heuristic. However, that was
before the changes to the page daemon in late summer of 2013 and the
existence of pmap_advise(). In particular, with the page daemon doing
its work more frequently and in smaller batches, it now completes its
work while the application accessing the file is blocked on I/O.
Whereas previously, the page daemon appeared to hog the CPU for so long
that it caused "hiccups" in the application's execution.
Finally, I'll add that the elimination of cache pages is a prerequisite
for NUMA support.
Reviewed by: jeff, kib
Sponsored by: EMC / Isilon Storage Division
named objects to zero before the virtual address is selected. Previously,
the color setting was delayed until after the virtual address was
selected. In rtld, this delay effectively prevented the mapping of a
shared library's code section using superpages. Now, for example, we see
the first 1 MB of libc's code on armv6 mapped by a superpage after we've
gotten through the initial cold misses that bring the first 1 MB of code
into memory. (With the page clustering that we perform on read faults,
this happens quickly.)
Differential Revision: https://reviews.freebsd.org/D2013
Reviewed by: jhb, kib
Tested by: Svatopluk Kraus (armv6)
MFC after: 6 weeks
promoted" panics. The sequence of events that leads to a panic is rather
long and circuitous. First, suppose that process P has a promoted
superpage S within vm object O that it can write to. Then, suppose that P
forks, which leads to S being write protected. Now, before P's child
exits, suppose that P writes to another virtual page within O. Since the
pages within O are copy on write, a shadow object for O is created to
house the new physical copy of the faulted on virtual page. Then, before
P can fault on S, P's child exists. Now, when P faults on S, it will
follow the "optimized" path for copy-on-write faults in vm_fault(),
wherein the underlying physical page is moved from O to its shadow object
rather than allocating a new page and copying the new page's contents from
the old page. Moreover, suppose that every 4 KB physical page making up S
is moved to the shadow object in this way. However, the optimized path
does not move the underlying superpage reservation, which is the root
cause of the panics! Ultimately, P performs vm_object_collapse() on O's
shadow object, which destroys O and in doing so breaks any reservations
still belonging to O. This leaves the reservation underlying S in an
inconsistent state: It's simultaneously not in use and promoted. Breaking
a reservation does not demote it because I never intended for a promoted
reservation to be broken. It makes little sense. Finally, this
inconsistency leads to an assertion failure the next time that the
reservation is used.
The failing assertion does not (currently) exist in FreeBSD 10.x or
earlier. There, we will quietly break the promoted reservation. While
illogical and unintended, breaking the reservation is essentially
harmless.
PR: 198163
Reviewed by: kib
Tested by: pho
X-MFC after: r267213
Sponsored by: EMC / Isilon Storage Division
to UFS, perform updates during syncer scans, which in particular means
that tmpfs now performs scan on sync. Also, this means that a mtime
update may be delayed up to 30 seconds after the write.
The vm_object' OBJ_TMPFS_DIRTY flag for tmpfs swap object is similar
to the OBJ_MIGHTBEDIRTY flag for the vnode object, it indicates that
object could have been dirtied. Adapt fast page fault handler and
vm_object_set_writeable_dirty() to handle OBJ_TMPFS_NODE same as
OBJT_VNODE.
Reported by: Ronald Klop <ronald-lists@klop.ws>
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
handler. For roughly twenty years, the page fault handler has used the
same basic strategy: Fetch a fixed number of non-resident pages both ahead
and behind the virtual page that was faulted on. Over the years,
alternative strategies have been implemented for optimizing the handling
of random and sequential access patterns, but the only change to the
default strategy has been to increase the number of pages read ahead to 7
and behind to 8.
The problem with the default page clustering strategy becomes apparent
when you look at how it behaves on the code section of an executable or
shared library. (To simplify the following explanation, I'm going to
ignore the read that is performed to obtain the header and assume that no
pages are resident at the start of execution.) Suppose that we have a
code section consisting of 32 pages. Further, suppose that we access
pages 4, 28, and 16 in that order. Under the default page clustering
strategy, we page fault three times and perform three I/O operations,
because the first and second page faults only read a truncated cluster of
12 pages. In contrast, if we access pages 8, 24, and 16 in that order, we
only fault twice and perform two I/O operations, because the first and
second page faults read a full cluster of 16 pages. In general, truncated
clusters are more common than full clusters.
To address this problem, this revision changes the default page clustering
strategy to align the start of the cluster to a page offset within the vm
object that is a multiple of the cluster size. This results in many fewer
truncated clusters. Returning to our example, if we now access pages 4,
28, and 16 in that order, the cluster that is read to satisfy the page
fault on page 28 will now include page 16. So, the access to page 16 will
no longer page fault and perform an I/O operation.
Since the revised default page clustering strategy is typically reading
more pages at a time, we are likely to read a few more pages that are
never accessed. However, for the various programs that we looked at,
including clang, emacs, firefox, and openjdk, the reduction in the number
of page faults and I/O operations far outweighed the increase in the
number of pages that are never accessed. Moreover, the extra resident
pages allowed for many more superpage mappings. For example, if we look
at the execution of clang during a buildworld, the number of (hard) page
faults on the code section drops by 26%, the number of superpage mappings
increases by about 29,000, but the number of never accessed pages only
increases from 30.38% to 33.66%. Finally, this leads to a small but
measureable reduction in execution time.
In collaboration with: Emily Pettigrew <ejp1@rice.edu>
Differential Revision: https://reviews.freebsd.org/D1500
Reviewed by: jhb, kib
MFC after: 6 weeks
compatible with write-locked path. Test for MAP_ENTRY_NOSYNC and set
VPO_NOSYNC for pages with dirty mask zero (this does not exclude a
possibility that the page is dirty, e.g. due to read fault on
writeable mapping and consequent write; the same issue exists in the
slow path).
Use helper vm_fault_dirty() to unify fast and slow path handling of
VPO_NOSYNC and setting the dirty mask.
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
called a scalable path. When several preconditions hold, the vm
object lock for the object containing the faulted page is taken in
read mode, instead of write, which allows parallel faults processing
in the region.
Namely, the fast path is taken when the faulted page already exists
and does not need copy on write, is already fully valid, and not busy.
For technical reasons, fast path is avoided when the fault is the
first write on the vnode object, or when the fault is for wiring or
debugger read or write.
On the fast path, pmap_enter(9) is passed the PMAP_ENTER_NOSLEEP flag,
since object lock is kept. Pmap might fail to create the entry, in
which case the fallback to slow path is performed.
Reviewed by: alc
Tested by: pho (previous version)
Hardware provided and hosted by: The FreeBSD Foundation and
Sentex Data Communications
Sponsored by: The FreeBSD Foundation
MFC after: 2 week
mapping size (currently unused). The flags includes the fault access
bits, wired flag as PMAP_ENTER_WIRED, and a new flag
PMAP_ENTER_NOSLEEP to indicate that pmap should not sleep.
For powerpc aim both 32 and 64 bit, fix implementation to ensure that
the requested mapping is created when PMAP_ENTER_NOSLEEP is not
specified, in particular, wait for the available memory required to
proceed.
In collaboration with: alc
Tested by: nwhitehorn (ppc aim32 and booke)
Sponsored by: The FreeBSD Foundation and EMC / Isilon Storage Division
MFC after: 2 weeks
pmap_unwire() and vm_object_unwire().
Retire vm_fault_{un,}wire(), since they are no longer used.
(See r268327 and r269134 for the motivation behind this change.)
Reviewed by: kib
Sponsored by: EMC / Isilon Storage Division
underlying physical pages are mapped by the pmap. If, for example, the
application has performed an mprotect(..., PROT_NONE) on any part of the
wired region, then those pages will no longer be mapped by the pmap.
So, using the pmap to lookup the wired pages in order to unwire them
doesn't always work, and when it doesn't work wired pages are leaked.
To avoid the leak, introduce and use a new function vm_object_unwire()
that locates the wired pages by traversing the object and its backing
objects.
At the same time, switch from using pmap_change_wiring() to the recently
introduced function pmap_unwire() for unwiring the region's mappings.
pmap_unwire() is faster, because it operates a range of virtual addresses
rather than a single virtual page at a time. Moreover, by operating on
a range, it is superpage friendly. It doesn't waste time performing
unnecessary demotions.
Reported by: markj
Reviewed by: kib
Tested by: pho, jmg (arm)
Sponsored by: EMC / Isilon Storage Division
the queue where to enqueue pages that are going to be unwired.
- Add stronger checks to the enqueue/dequeue for the pagequeues when
adding and removing pages to them.
Of course, for unmanaged pages the queue parameter of vm_page_unwire() will
be ignored, just as the active parameter today.
This makes adding new pagequeues quicker.
This change effectively modifies the KPI. __FreeBSD_version will be,
however, bumped just when the full cache of free pages will be
evicted.
Sponsored by: EMC / Isilon storage division
Reviewed by: alc
Tested by: pho
need COW and is writeable (i.e. becoming writeable due to the
mprotect(2) operation), do not create a new backing object for the
entry. The caller of the function is vm_map_protect(), the call is
made to ensure that wired entry has all pages resident and wired in
the top level object and to enable the write. We might need to copy
read-only page from some backing objects into the top object or remap
the page with the write allowed.
This fixes the issue with mishandling of the swap accounting when
read-only wired mapping is upgraded to write-enabled after fork. The
previous code path did not accounted the new object, but it creation
is redundand anyway and the change provides an optimization for the
non-common situation.
Reported by: markj
Suggested and reviewed by: alc (previous version)
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
entry and performs the upgrade of the entry permissions from read-only
to read-write, we must allow to search for the source pages in the
backing object, like we do in the case of forking the read-only wired
entry. For the fork case, the behaviour is allowed by src_readonly
boolean, which in fact is only used to assert that read-write case
provides all source pages in the top-level object.
Eliminate the src_readonly variable. Allow for the copy loop to look
into the backing objects, add explicit asserts to ensure that only
read-only and upgrade case actually does.
Expand comments. Change the panic call into assert.
Reported by: markj
Tested by: markj, pho (previous version)
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
faults.
First, for accesses to direct map region should check for the limit by
which direct map is instantiated.
Second, for accesses to the kernel map, success returned from the
kernacc(9) does not guarantee that consequent attempt to read or write
to the checked address succeed, since other thread might invalidate
the address meantime. Add a new thread private flag TDP_DEVMEMIO,
which instructs vm_fault() to return error when fault happens on the
MAP_ENTRY_NOFAULT entry, instead of panicing. The trap handler would
then see a page fault from access, and recover in normal way, making
/dev/mem access safer.
Remove GIANT_REQUIRED from the amd64 memrw(), since it is not needed
and having Giant locked does not solve issues for amd64.
Note that at least the second issue exists on other architectures, and
requires similar patching for md code.
Reported and tested by: clusteradm (gjb, sbruno)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
map a fraction of the pages that were fetched by vm_pager_get_pages() from
secondary storage. Now, we map them all in order to avoid future soft
faults. This effect is most evident when a memory-mapped file is accessed
sequentially. Previously, there were 6 soft faults for every hard fault.
Now, these soft faults are eliminated.
Sponsored by: EMC / Isilon Storage Division
is chunked to pieces limited by integer io_hold_cnt tunable, while
vm_fault_quick_hold_pages() takes integer max_count as the upper bound.
Rearrange the checks to correctly handle overflowing address arithmetic.
Submitted by: bde
Tested by: pho
Discussed with: alc
MFC after: 1 week
and the equivalent functionality is now provided by sendfile(2) over
posix shared memory filedescriptor.
Remove the cow member of struct vm_page, and rearrange the remaining
members. While there, make hold_count unsigned.
Requested and reviewed by: alc
Tested by: pho
Sponsored by: The FreeBSD Foundation
Approved by: re (delphij)
for nodes used in vm_radix.
On architectures supporting direct mapping, also avoid to pre-allocate
the KVA for such nodes.
In order to do so make the operations derived from vm_radix_insert()
to fail and handle all the deriving failure of those.
vm_radix-wise introduce a new function called vm_radix_replace(),
which can replace a leaf node, already present, with a new one,
and take into account the possibility, during vm_radix_insert()
allocation, that the operations on the radix trie can recurse.
This means that if operations in vm_radix_insert() recursed
vm_radix_insert() will start from scratch again.
Sponsored by: EMC / Isilon storage division
Reviewed by: alc (older version)
Reviewed by: jeff
Tested by: pho, scottl
Unify the 2 concept into a real, minimal, sxlock where the shared
acquisition represent the soft busy and the exclusive acquisition
represent the hard busy.
The old VPO_WANTED mechanism becames the hard-path for this new lock
and it becomes per-page rather than per-object.
The vm_object lock becames an interlock for this functionality:
it can be held in both read or write mode.
However, if the vm_object lock is held in read mode while acquiring
or releasing the busy state, the thread owner cannot make any
assumption on the busy state unless it is also busying it.
Also:
- Add a new flag to directly shared busy pages while vm_page_alloc
and vm_page_grab are being executed. This will be very helpful
once these functions happen under a read object lock.
- Move the swapping sleep into its own per-object flag
The KPI is heavilly changed this is why the version is bumped.
It is very likely that some VM ports users will need to change
their own code.
Sponsored by: EMC / Isilon storage division
Discussed with: alc
Reviewed by: jeff, kib
Tested by: gavin, bapt (older version)
Tested by: pho, scottl
We cannot busy a page before doing pagefaults.
Infact, it can deadlock against vnode lock, as it tries to vget().
Other functions, right now, have an opposite lock ordering, like
vm_object_sync(), which acquires the vnode lock first and then
sleeps on the busy mechanism.
Before this patch is reinserted we need to break this ordering.
Sponsored by: EMC / Isilon storage division
Reported by: kib
- It does not let pages respect the LRU policy
- It bloats the active/inactive queues of few pages
Try to avoid it as much as possible with the long-term target to
completely remove it.
Use the soft-busy mechanism to protect page content accesses during
short-term operations (like uiomove_fromphys()).
After this change only vm_fault_quick_hold_pages() is still using the
hold mechanism for page content access.
There is an additional complexity there as the quick path cannot
immediately access the page object to busy the page and the slow path
cannot however busy more than one page a time (to avoid deadlocks).
Fixing such primitive can bring to complete removal of the page hold
mechanism.
Sponsored by: EMC / Isilon storage division
Discussed with: alc
Reviewed by: jeff
Tested by: pho
is being wired now. The entry wired count is changed to non-zero in
advance, before the map lock is dropped. This makes the vm_fault() to
perceive the entry as wired, and breaks the fragment which moves the
wire count from the shadowed page, to the upper page, making the code
unwiring non-wired page.
On the other hand, the vm_fault() calls from vm_fault_wire() should be
allowed to proceed, so only drain MAP_ENTRY_IN_TRANSITION from
vm_fault() when wiring_thread is not current.
Reported and tested by: pho
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
future further optimizations where the vm_object lock will be held
in read mode most of the time the page cache resident pool of pages
are accessed for reading purposes.
The change is mostly mechanical but few notes are reported:
* The KPI changes as follow:
- VM_OBJECT_LOCK() -> VM_OBJECT_WLOCK()
- VM_OBJECT_TRYLOCK() -> VM_OBJECT_TRYWLOCK()
- VM_OBJECT_UNLOCK() -> VM_OBJECT_WUNLOCK()
- VM_OBJECT_LOCK_ASSERT(MA_OWNED) -> VM_OBJECT_ASSERT_WLOCKED()
(in order to avoid visibility of implementation details)
- The read-mode operations are added:
VM_OBJECT_RLOCK(), VM_OBJECT_TRYRLOCK(), VM_OBJECT_RUNLOCK(),
VM_OBJECT_ASSERT_RLOCKED(), VM_OBJECT_ASSERT_LOCKED()
* The vm/vm_pager.h namespace pollution avoidance (forcing requiring
sys/mutex.h in consumers directly to cater its inlining functions
using VM_OBJECT_LOCK()) imposes that all the vm/vm_pager.h
consumers now must include also sys/rwlock.h.
* zfs requires a quite convoluted fix to include FreeBSD rwlocks into
the compat layer because the name clash between FreeBSD and solaris
versions must be avoided.
At this purpose zfs redefines the vm_object locking functions
directly, isolating the FreeBSD components in specific compat stubs.
The KPI results heavilly broken by this commit. Thirdy part ports must
be updated accordingly (I can think off-hand of VirtualBox, for example).
Sponsored by: EMC / Isilon storage division
Reviewed by: jeff
Reviewed by: pjd (ZFS specific review)
Discussed with: alc
Tested by: pho
similar changes had to be made in various places throughout the machine-
independent virtual memory layer to support the new vm object type.
However, in most of these places, it's actually not the type of the vm
object that matters to us but instead certain attributes of its pages.
For example, OBJT_DEVICE, OBJT_MGTDEVICE, and OBJT_SG objects contain
fictitious pages. In other words, in most of these places, we were
testing the vm object's type to determine if it contained fictitious (or
unmanaged) pages.
To both simplify the code in these places and make the addition of future
vm object types easier, this change introduces two new vm object flags
that describe attributes of the vm object's pages, specifically, whether
they are fictitious or unmanaged.
Reviewed and tested by: kib
forked. Otherwise, pagedaemon might reclaim the page without saving
its content into the swap file, resulting in the valid content
replaced by zeroes.
Reported and tested by: pho
Reviewed and comment update by: alc
MFC after: 1 week
In particular, do not lock Giant conditionally when calling into the
filesystem module, remove the VFS_LOCK_GIANT() and related
macros. Stop handling buffers belonging to non-mpsafe filesystems.
The VFS_VERSION is bumped to indicate the interface change which does
not result in the interface signatures changes.
Conducted and reviewed by: attilio
Tested by: pho
