ldd had #defines for AOUT, ELF, and ELF32. The removal of AOUT left a
possibly confusing gap. These are not used anywhere but this file so
renumber to avoid the gap.
Reported by: allanjude
Previously -q (just print a line when files differ) ignored flags like
-w (ignore whitespace). Avoid the D_BRIEF short-circuit when flags are
in effect.
PR: 252515
Reported by: Scott Aitken
Reviewed by: kevans
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D28064
Add two simple examples showing the use of the flags: d, n, s, t
While here, reorder cross references properly by section
Bump .Dd
Approved by: manpages (gbe@)
Differential Revision: https://reviews.freebsd.org/D27540
last(1): Bump .Dd
Add some examples showing the use of the flags: a, k, P, w
Reviewed by: gbe@, yuripv@
Approved by: manpages (gbe@)
Differential Revision: https://reviews.freebsd.org/D27545
Userland aout support has not been required since FreeBSD 2.x.
If someone needs to use FreeBSD 2 shared libraries they will be best
served by using a FreeBSD 2 ldd, perhaps as part of a jail with a full
FreeBSD 2.x install.
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27478
The current version of this test will effectively pass as long as one of the
specified paths is in the output, and it could even be a subset of one of
the paths.
Strengthen up the test a little bit:
* Specify beginning/end anchors for each path
* Add egrep -v checks to make sure we don't have any *additional* paths
* Ratchet down paths2 to exactly the two paths we expect to appear
Reviewed by: ngie
Differential Revision: https://reviews.freebsd.org/D27984
This test attempts to use \t (tab intended) in a grep expression. With the
former /usr/bin/grep (i.e. gnugrep), this was interpreted as a literal 't'.
The expression would work anyways because the tr(1) usage would ultimately
replace all of the spaces with a single newline, and they would match the
paths whether they were correctly fromatted or not.
Current /usr/bin/grep (i.e. bsdgrep) is less-tolerant of ordinary-escapes, a
property of the underlying regex(3) engine, to make it easier to identify
when stuff like this happens. In-fact, this expression broke after the
switch happened.
This revision does the bare basics to fix the usage by using a printf to get
a literal tab character to insert into the expression. It also swaps out the
manual insertion of the line prefix into the grep expression by pulling
that part out of $sep and reusing it for the leading path.
The secondary issue was the tr(1) usage, since tr would only replace the
first character of string1 with the first character of string2. This has
instead been replaced by a sed expression, which similary understands \n to
be a newline on all supported versions of FreeBSD. Each path now gets
prefixed with the appropriate context that should be there (i.e. numeric
sequence followed by a tab).
PR: 252446
Reviewed by: emaste, ngie
Differential Revision: https://reviews.freebsd.org/D27983
As suggested in D27598. This also supports MK_WERROR.clang=no and
MK_WERROR.gcc=no to support the existing NO_WERROR.<compiler> uses.
Reviewed By: brooks
Differential Revision: https://reviews.freebsd.org/D27601
While here:
- Split synopsis into two parts. The first explains how to record
sessions, while the second one explains how to replay (some of)
the recorded sessions.
- Fix the -width argument of the environment variables list.
MFC after: 1 week
- Ignore malformed directory entries as created by Dropbox ("/").
(rev 1.24)
- Use libarchive 3.x interface: check result for archive_read_free()
and don't call archive_read_close manually. (rev 1.23)
- Always overwrite symlinks on extraction, ever if they're newer than
entries in archive.
- Use getline() rather than getdelim().
PR: 231827
Submitted by: ak
Reviewed by: mm
Obtained from: NetBSD
MFC after: 2 weeks
sockstat can "hang" on getpwuid() calls in situations when FreeBSD
is joined to a directory service (AD/LDAP etc) and the directory
service fail to answer in a timely manner when trying to resolve
numeric UIDs to user names.
Submitted by: Caleb St. John <caleb@ixsystems.com>
MFC after: 1 week
Add two simple examples. In this case I opted to show a small portion of
the output since it helps to understand what the tool does. It shows the use
of the -t flag too.
PR:
Submitted by:
Reported by:
Reviewed by: gbe@
Approved by: manpages (bcr@)
Obtained from:
MFC after:
MFH:
Relnotes:
Security:
Sponsored by:
Differential Revision: https://reviews.freebsd.org/D27543
FreeBSD has used ELF binaries/libraries for decades, but still has some
support for legacy a.out binaries. Portions of this have been retired
over time, but support remained in ldd, ldconfig, and gprof.
Retire gprof support; if anyone needs to do development on a.out
binaries still they will be best served by installing a full FreeBSD 2.x
or other obsolete version in a jail.
Kernel support for executing a.out binaries is unchnaged.
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27480
Unconditionally install bsdgrep as grep, bootstrap or not. Remove all
build glue and stop installing both gnugrep and libgnuregex now that
all consumers of the latter are gone.
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D27732
When exporting a variable we correctly check all the preconditions that
could make setenv(3) fail. Checking the setenv(3) return value seems
redundant, but given that login(1) is critical, it doesn't hurt to have
a post-check.
This change is based on the "Principles of Secure Coding" course by
Matthew Bishop, PhD., which specifically discusses this code in FreeBSD.
(This change redoes r368776 due to a silly mistake)
When exporting a variable we correctly check all the preconditions that
could make setenv(3) fail. Checking the setenv(3) return value seems
redundant, but given that login(1) is critical, it doesn't hurt to have
a post-check.
This change is based on the "Principles of Secure Coding" course by
Matthew Bishop, PhD., which specifically discusses this code in FreeBSD.
Differential Revision: https://reviews.freebsd.org/D26966
Also centralize and unify checks to enable ASLR stack gap in a new
helper exec_stackgap().
PR: 239873
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Move the include of langinfo.h out of the WITH_ICONV condition block,
since it is not dependent on ICONV. This was correct when nl_langinfo()
had only been called in the WITH_ICONV case, but that is no longer the
case.
Submitted by: yuripv
There was an unprotected use of nl_langinfo() to determine the order of
day vs. month in the generated output.
When building without ICONV support, the order will be: month, day.
yesexpr is an extended regular expression for quite some time now,
use appropriate flag when compiling it.
PR: 238762
Reviewed by: kevans
Differential Revision: https://reviews.freebsd.org/D27509
Add simple example showing the use of the flags: p, t, v
Reviewed by: gbe@, yuripv@
Approved by: manpages (yuripv@)
Differential Revision: https://reviews.freebsd.org/D27541
These values are taken directly from the density report from an
IBM LTO-9 tape drive. (Using mt getdensity)
A LTO-9 drive stores 18TB raw (45TB with compression) on an LTO-9 tape.
lib/libmt/mtlib.c:
Add the LTO-9 density code, and bpmm/bpi values.
usr.bin/mt/mt.1:
Add the LTO-9 density code, bpmm/bpi values and number of
tracks. Bump the man page date.
MFC after: 3 days
Sponsored by: Spectra Logic
Add some examples covering the flags: G, n, P, p, u
Add reference to groups(1)
Approved by: manpages (gbe@)
Differential Revision: https://reviews.freebsd.org/D27539
We know up front how many items we can have in the queue (-B/Bflag), so
pay the cost of those particular allocations early on.
The reduced queue maintenance overhead seemed to yield about an ~8%
improvement for my earlier `grep -C8 -r closefrom .` test.
MFC after: 2 weeks
In both cases, print the flag bits first followed by the command.
Output now looks something like this:
(ktrace)
_umtx_op(0x8605f7008,0xf<UMTX_OP_WAIT_UINT_PRIVATE>,0,0,0)
_umtx_op(0x9fffdce8,0x80000003<UMTX_OP__32BIT|UMTX_OP_WAKE>,0x1,0,0)
(truss)
_umtx_op(0x7fffffffda50,UMTX_OP_WAKE,0x1,0x0,0x0) = 0 (0x0)
_umtx_op(0x9fffdd08,UMTX_OP__32BIT|UMTX_OP_WAKE,0x1,0x0,0x0) = 0 (0x0)
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D27325
This is addressing cases such as fts_read(3) encountering an [EIO]
from fchdir(2) when FTS_NOCHDIR is not set. That would otherwise be
seen as a successful traversal in some of these cases while silently
discarding expected work.
As noted in r264201, fts_read() does not set errno to 0 on a successful
EOF so it needs to be set before calling it. Otherwise we might see
a random error from one of the iterations.
gzip is ignoring most errors and could be improved separately.
Reviewed by: vangyzen
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D27184
r368355 removed the GNU_GREP_COMPAT knob (off by default) and forgot that
bsdgrep may be built/used for bootstrap on some systems.
All base uses should strive to use only POSIX-compliant expressions anyways
and we haven't had libregex by default here up to this point, so just don't
do that if we're bootstrapping.
Note that the resulting binary has the wrong `grep -V` information as it
falsely claims to be GNU compatible, but it is only for bootstrap.
Reported by: GitHub cross-builds via yuripv
This was introduced and then disabled by default primarily to avoid dealing
with bugs in libgnuregex. rS363823 switched to using libregex for it, so
let's just rip the option out now so we can make sure we're getting tested
with libregex via bsdgrep.
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D27476
Update libarchive to 3.5.0
Relevant vendor changes:
Issue #1258: add archive_read_support_filter_by_code()
PR #1347: mtree digest reader support
Issue #1381: skip hardlinks pointing to itself on extraction
PR #1387: fix writing of cpio archives with hardlinks without file type
PR #1388: fix rdev field in cpio format for device nodes
PR #1389: completed support for UTF-8 encoding conversion
PR #1405: more formats in archive_read_support_format_by_code()
PR #1408: fix uninitialized size in rar5_read_data
PR #1409: system extended attribute support
PR #1435: support for decompression of symbolic links in zipx archives
Issue #1456: memory leak after unsuccessful archive_write_open_filename
MFC after: 1 week
The contents of lib.c, lib2.c, bc_help.c, and dc_help.c depends on the
parameters passed to strgen.sh in this Makefile. A change to the number
of parameters of strgen.sh has been applied to the invocation of this
command, but this did not cause a rebuild of the generated files.
Reported by: Cy.Schubert@cschubert.com
Crypto file descriptors were added in the original OCF import as a way
to provide per-open data (specifically the list of symmetric
sessions). However, this gives a bit of a confusing API where one has
to open /dev/crypto and then invoke an ioctl to obtain a second file
descriptor. This also does not match the API used with /dev/crypto on
other BSDs or with Linux's /dev/crypto driver.
Character devices have gained support for per-open data via cdevpriv
since OCF was imported, so use cdevpriv to simplify the userland API
by permitting ioctls directly on /dev/crypto descriptors.
To provide backwards compatibility, CRIOGET now opens another
/dev/crypto descriptor via kern_openat() rather than dup'ing the
existing file descriptor. This preserves prior semantics in case
CRIOGET is invoked multiple times on a single file descriptor.
Reviewed by: markj
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D27302
o allow env var MAKE_OBJDIR_CHECK_WRITABLE=no to skip writable
checks in InitObjdir. Explicit .OBJDIR target always allows
read-only directory.
o More code cleanup and refactoring.
o More unit tests
MFC after: 1 week
* Add examples covering -f, -m and -p flags.
While here, extend the initial description paragraph to note that fstat(1)
will report on all opened files, belonging to processes the user has access to.
The current paragraph may lead to understand that you can get information on
opened files from processes belonging to other users.
Reviewed by: bjk@, danfe@, gbe@
Approved by: manpages (gbe@)
Differential Revision: https://reviews.freebsd.org/D26949
* Add more EXAMPLES covering flags: -A, -B, -c, -f, -i, -H, -l, -q, -R, -w
* While here, change existing wording to use the imperative (remove "To
find")
* Reword first example to be consistent with how grep(1) understand
words (-w)
Approved by: manpages (bcr@)
Differential Revision: https://reviews.freebsd.org/D27264
Let's have two entries in the synopsis:
- chpass now lists options which can be used for non-NIS-specific
functionalities.
- ypchpass additionally lists the NIS-specific flags.
Technically, it is an artificial distinction, as chpass and ypchpass behave
identically. Nevertheless, it might help navigating the synopsis section.
Reviewed by: imp
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D27251
The synopsis section had two very similar entries. The flags documented by
the first one were a strict subset of the second one. Let's just keep only
the second entry for simplicity.
MFC after: 1 week
The program reads oldsize bytes from oldfile, and proceeds to initialize
a suffix array of oldsize elements using divsufsort(). As per the
function's API [1], array indices 0 through n-1 are initialized.
Later, search() is called, but with index bounds [0, n]. Depending on
the contents of the malloc'd buffer, accessing this uninitialized index
at the end of can result in a segmentation fault. Fix this by passing
oldsize-1 to search(), limiting the search bounds to [0, n-1].
This bug is a result of r303285, which introduced divsufsort() as an
alternate suffix sorting function to the existing qsufsort(). It seems
that qsufsort() did initialize the final empty element, meaning it could
be safely accessed. This difference in the implementations was missed at
the time.
[1] https://github.com/y-256/libdivsufsort
Discussed with: cperciva
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26911
The C.UTF-8 locales is the same as the actual C locale except it does support
the unicode character set. But the collation etc are still the same as the C
locale one.
Reviewed by: many
Approved by: many
Differential Revision: https://reviews.freebsd.org/D26973
Provide a way to ask for an opaque version string for a locale_t, so
that potential changes in sort order can be detected. Similar to
ICU's ucol_getVersion() and Windows' GetNLSVersionEx(), this API is
intended to allow databases to detect when text order-based indexes
might need to be rebuilt.
The CLDR version is extracted from CLDR source data by the Makefile
under tools/tools/locale, written into the machine-generated Makefile
under shared/colldef, passed to localedef -V, and then written into
LC_COLLATE file headers. The initial version is 34.0.
tools/tools/locale was recently updated to pull down 35.0, but the
output hasn't been committed under share/colldef yet, so that will
provide the first observable change when it happens. Other versioning
schemes are possible in future, because the format is unspecified.
Reviewed by: bapt, 0mp, kib, yuripv (albeit a long time ago)
Differential Revision: https://reviews.freebsd.org/D17166
Lots of new unit-tests increase code coverage.
Lots of refactoring, cleanup and simlpification to reduce
code size.
Fixes for Bug 223564 and 245807
Updates to dirdeps.mk and meta2deps.py
This prevents LANG= in an included file from affecting the interpretation
of month and day names in the including file.
Make the internal pre-processor accept white space between the "#" at
the start of the line and the keyword for better compatibility with cpp.
Add support for the cpp keywords #warning and #error.
MFC after: 3 days
Fix one case where #else was not corerctly processed and simplify the
conditions logic.
Fix parsing of day and month names in the locale specified in the calendar
file. The previous version would expect those names to match the locale of
the user.
Mention that comments are now correctly processed and that // is supported
in addition to /* ... */.
MFC after: 3 days
Since elftoolchain's cxxfilt is rather far behind on features, and we
ran into several bugs, add an option to use llvm-cxxfilt as an drop-in
replacement.
It supports the same options as elftoolchain cxxfilt, though it doesn't
have support for old ARM (C++ Annotated Reference Manual, not the CPU)
and GNU v2 manglings. But these are irrelevant in 2020.
Note: as we already compile the required libraries as part of libllvm,
this will not add any significant build time either.
PR: 250702
Reviewed by: emaste, yuri
Differential Revision: https://reviews.freebsd.org/D27071
MFC after: 2 weeks
Calendar files that specify LANG=... to specify their character encoding did
also set the date format defined for that locale, resulting in output like:
Nov 4 Gabriel Faure dies from pneumonia in Paris, France, 1924
4 nov. N'oubliez pas les Charles !
After this commit the output is always printed in a consistent format
according to the user's current locale, e.g.:
Nov 4 Gabriel Faure dies from pneumonia in Paris, France, 1924
Nov 4 N'oubliez pas les Charles !
I'll open a review asking for opinions whether this format change should
be merged to -STABLE.
Relnotes: yes
This fixes two warnings:
* double-definition of a symbol in a yacc header
* Comparison of an unsigned int being >= 0; that's always
going to be true.
Reviewed by: imp, rscheff
Differential Revision: https://reviews.freebsd.org/D27036
Add line number information to more warning and error messages.
Detect #else and #endif without corresponing #ifdef/#ifndef as error.
Detect missing #endif at end of file and print warning but continue.
Support for #undef has been added to reverse the effect of a prior #define.
It is no error if the argument value has not been defined before.
These changes may cause error aborts on malformed input files (e.g. with
spurious #else or #endif), but no such errors exist in the calendar files
in the FreeBSD base system and the calendar-data port and all tests pass.
More tests will be added in a follow-up commit to detect regressions that
might affect the newly added features.
This commit ends a series of updates that enhance the pre-processor and
make it behave much more like prior versions of the calendar progarm that
called cpp to pre-process the data files.
MFC after: 3 days
Relnotes: yes
The calendar program used to output entries in reverse order, due to the
way an internal linked list was built up.
A regression test with 2 entries for the same day has been adapted to the
now non-reversed order.
MFC after: 3 days
The internal pre-processor ignored lines that did not parse a calendar
entries, but did not support multi-line comments in the way the external
cpp did.
The calendar files distributed with the base system (now in a port) do
use comments, though.
Implement comment processing for single-line (//) and multi-line comments
(/* */) with same semantics as in a standard C pre-processor.
All tests pass with this version, but there are no tests that specifically
verify comment processing.
Reported by: jhs@berklix.com (Julian H. Stacey)
MFC after: 3 days
Very small EXAMPLES section.
While here, remove reference to nroff(1).
Approved by: manpages (bcr@)
Differential Revision: https://reviews.freebsd.org/D26947
