Move the installer's keymap solution introduced by SVN r259468. The new
location of /etc/rc.local on the install media is more appropriate as it
knows serial vs. non-serial and can also do the change earlier (so that
even the initial Install dialog can benefit from the change).
Discussed with: nwhitehorn
* Purge old translations.
* Add missing footer due to DSSSL->XSLT migration and use XML catalog to
resolve URI.
* Add missing arch= and revision= support.
- Update release.ent and fix release number in Errata.
r259868 (jmmv):
Delay copying of resolv.conf into the chroot until /etc
exists.
r259881 (jmmv):
Put the release objdir inside the chroot.
259955:
Move build_doc_ports() to the if...fi block from which it is
called.
Sponsored by: The FreeBSD Foundation
Bootstrap etcupdate(8) as part of the release build, similar
to what is done for mergemaster(8). This allows etcupdate(8)
to work out-of-box after the first upgrade of a system.
Sponsored by: The FreeBSD Foundation
Add pointer to wiki for Hyper-V information.
Wiki content for Hyper-V in FreeBSD 10 was significantly updated by
Abhishek Gupta <abgupta@microsoft.com>.
r259426:
Add a pkg(8) repository configuration file for cdrom-based package
installation.
As part of the 'pkg-stage' target, copy the configuration file
to the 'packages/repos/' directory on the DVD filesystem.
r259427:
Export 'REPOS_DIR' when the selected source medium for package
installation is cdrom. This enables bsdconfig(8) to make use
of the on-disc pkg(8) repository configuration, which fixes
package selection and installation from the dvd installer.
Sponsored by: The FreeBSD Foundation
Prevent release build errors found during snapshot builds where if
NOPORTS=1, pkg-stage.sh cannot build the ports-mgmt/pkg port if
WITH_DVD=1.
Sponsored by: The FreeBSD Foundation
Reduce disc1.iso image size by installing the userland with
the WITHOUT_PROFILE=1 option set, trimming 56MB from the image.
This change was somehow lost during the 10.0-RELEASE cycle, and
is intended for MFC to releng/10.0.
Sponsored by: The FreeBSD Foundation
r257805:
Add a 'mini-memstick.img' release target, which will use the
'bootonly.iso' components to create a smaller memory stick image.
This is useful for system recovery, where a full memstick.img image
is not necessarily needed (or wanted). In addition, it is possible
to do bootonly-style installation, where the base.txz, kernel.txz,
etc. are fetched from a remote source.
Provide backwards-compatible target (mini-memstick), to keep in sync
with the targets documented in release/Makefile.
r257806:
Remove extra target from 'memstick' that I forgot to remove before
previous commit.
r257807:
Update release(7) to include 'mini-memstick'.
r257942:
Fix a few style nits.
Sponsored by: The FreeBSD Foundation
r258786:
Move OPTIONS_UNSET outside of the PBUILD_FLAGS variable, otherwise
the textproc/docproj port build fails.
r258796 (hrs):
- Prevent TARGET and TARGET_ARCH from being defined as empty when
TARGET="" and/or TARGET_ARCH="" is specified.
- Remove extra ().
r258797 (hrs):
Use standard CLEANFILES/CLEANDIRS and clean target in bsd.obj.mk.
r258847:
Provide reproducibility between builds by building pkg(8) from ports,
instead of using pkg-bootstrap.
This should resolve a problem that was discovered during 10.0-BETA4
freebsd-update(8) builds,
r258853:
Turn off the dvdrom target by default. dvd1.iso is now built by
specifying 'WITH_DVD=1' during 'make release'.
This caused some problems during the freebsd-update builds for
10.0-BETA4.
r258949:
Ensure WITH_DVD is not empty to prevent 'WITH_DVD= ' from evaluating
to true.
Approved by: re (hrs)
Sponsored by: The FreeBSD Foundation
r258319, r258320:
r258305:
Use the IMAGES variable to determine which image files to remove
as part of 'make -C /usr/src/release clean'.
r258307:
Add a script and configuration files to fetch pre-built packages
from pkg.FreeBSD.org for inclusion on release medium (dvd1.iso).
r258308:
Unconditionally copy the build host /etc/resolv.conf into
the chroot directory, since hostname resolution may be
needed in the case of building a dvd image (with packages)
and also setting 'NOPORTS=1'.
r258309:
Set the PKG_CACHEDIR directory to 'dvd/' instead of 'release/'
in preparation of adding a 'dvd1.iso' target.
r258310:
Add the 'dvd1.iso' target. This mimics the 'release.iso' target,
with the additional step of fetching packages for inclusion on the
dvd image.
The 'pkg-stage' target is used to run 'scripts/pkg-stage.sh' if
the '${TARGET}/pkg-stage.conf' configuration file exists (currently
only amd64 and i386).
Allow dvd1.iso to be skipped if NODVD=1.
r258314:
Fix how ABI is evaluated so it matches more than a dot-zero
case.
r258317:
Document the 'dvdrom' target.
r258319:
Remove WITHOUT_PROFILE=1 for the dvd1.iso medium.
r258320:
Simplify PKG_ABI for pkg-stage.sh.
Approved by: re (hrs)
Sponsored by: The FreeBSD Foundation
Since the doc/ toolchain conversion to docbook 5.0, JADETEX
is no longer a valid option, so remove 'WITHOUT_JADETEX=yes'
from PBUILD_FLAGS.
While here, also remove 'WITHOUT_X11=yes', since it will
cause a dependency conflict by requiring both print/ghostscript9
and print/ghostscript9-nox11.
Switch to OPTIONSNG format (WITHOUT_* -> OPTIONS_UNSET='FOO'),
and unset the FOP option, which requires Java (although it is
disabled by default). Also unset the 'IGOR' option, since
textproc/igor is a validation tool, not necessarily a dependency
of the doc/ build itself.
While here, reduce the line length of PBUILD_FLAGS.
Approved by: re (kib)
Sponsored by: The FreeBSD Foundation
- Syncronize stable/10/release/doc with head/ in followup to
the docbook5.0 update to the doc/ repository.
Approved by: re (delphij)
Sponsored by: The FreeBSD Foundation
When building the textproc/docproj port, the ports-mgmt/pkg port
needs /var/run/ld-elf*.so.hints, which is not automatically created.
Fix reldoc build by running the ldconfig(8) startup script in the
chroot directory before starting the port build phase.
Approved by: re (kib)
Sponsored by: The FreeBSD Foundation
Newer FreeBSD installs require an install(1) that supports the new flags.
This adds ${MAKEOBJDIRPREFIX}${.CURDIR}/tmp/legacy/{bin,usr/{bin,sbin}}
to the PATH while generating an mtree database for 'make release'.
Note that the problem only exists here because mm-mtree.sh generates
its own object tree to avoid mucking with the existing one, which
results in a PATH containing legacy utility dirs that are empty.
allow the toolchain to detect the correct values.
- Remove {SRC,DOC,PORT}REVISION variables, and use 'branch@rNNNNNN'
as the {SRC,DOC,PORT}BRANCH variables.
- Only set default KERNEL_FLAGS and WORLD_FLAGS make(1) jobs if the
number of CPUs is greater than 1.
Submitted by: hrs
o We need wait a bit before attempting the root mount. The CD drives
on HP machines (typical) go through the management controller so
that it can be virtualized. In practice what this means is that it
is slow to detect and attach.
o Tell the kernel what to use as the root file system. The /etc/fstab
trick doesn't work, because we're on the EFI-compatble file system.
Introduce $BASEBITSDIR for clarity and in order to avoid repeating this
mistake in the future. Fixing this ensures that we pick up the newly built
boot code and loader native to the target, which is especially relevant
when cross-building release images.
- It is pointless to specify an endianess for ISO 9660 images so strip that.
MFC after: 3 days
the src/ tree into a directory that contains files/directories, such
as a case where a custom kernel configuration file is specified.
- Allow specification of multiple KERNCONFs to pass to 'make release'.
- Move evaluation of NODOCS/NOPORTS earlier, and set based on how the
release process expects these options to be evaluated.
- Wrap KERNCONF specification in double quotes, and use 'eval' so multiple
kernel configurations do not cause the build to fail in strange ways.
- Set WITHOUT_X11 for the port build flags for the documentation toolchain
build. Also run 'clean distclean' targets during port build.
PR: 180192
Submitted by: Anes Mukhametov
MFC after: 3 days
Approved by: kib (mentor, implicit)
